Threat database

CVE-2026-79982 is a high-severity vulnerability in the Zephyr project's Bluetooth HCI USB transport class. It involves a buffer overflow caused by copying oversized HCI packets into a fixed-size USB transfer buffer without proper length checks. This can lead to memory corruption or denial of service. The flaw affects Zephyr versions from 3.3.0 through 4.4.2. An attacker within Bluetooth range can exploit this by sending oversized packets, potentially causing arbitrary code execution on systems without memory protection or triggering a panic on others.

CVE-2026-79981 is a medium severity vulnerability in the Zephyr project's DNS stub resolver. The resolver binds a single UDP socket with a fixed ephemeral source port for all DNS queries to a configured server, violating RFC 5452's requirement that both source port and transaction ID vary. This allows an off-path attacker with UDP reachability to the device to guess the source port easily and flood forged DNS responses, potentially causing the application to resolve attacker-chosen addresses. The vulnerability affects Zephyr versions from 1.8.0 up to but not including 4.5.0. A patch is available that randomizes the source port per query, increasing the guessing space and mitigating the risk.

CVE-2026-79980 is a medium severity vulnerability in the DHCPv4 client of the Zephyr project. The client used a predictable transaction identifier that was incremented or reused rather than randomized per transaction as required by RFC 2131. This allowed an attacker who observed one identifier to predict future identifiers and forge DHCP replies. Such forged replies could redirect network traffic by changing the device's default gateway and DNS resolvers or disrupt network configuration by sending forged DHCPACK or DHCPNAK messages. A patch is available that ensures a fresh random transaction identifier is generated for each DHCP transaction phase.

CVE-2026-79979 is a use-after-free vulnerability in the Zephyr project affecting arm64 builds with CONFIG_USERSPACE and CONFIG_DEMAND_PAGING enabled. The issue arises from improper TLB invalidation that only targets ASID 0, allowing stale translations for other ASIDs to persist. This flaw enables unprivileged user threads to access and modify kernel or other domain memory, breaking memory isolation and potentially leading to full system compromise. The vulnerability affects Zephyr versions from 4.3.0 up to but not including 4.5.0. A fix has been implemented to correct the TLB invalidation to cover all ASIDs and preserve proper memory domain permissions.

CVE-2026-79978 is a low-severity vulnerability in the Zephyr RTOS affecting the ADXL345 accelerometer driver. The issue arises from out-of-bounds writes during FIFO data processing when the allocated buffer is smaller than a full batch. This can cause silent data corruption or crashes due to memory corruption in the RTIO block pool. Exploitation requires specific hardware configuration and buffer pool starvation conditions.

CVE-2026-79977 is a vulnerability in the WireGuard VPN implementation within Zephyr (subsys/net/lib/wireguard/wg.c) that allows an attacker to spoof the peer endpoint address without authentication. This occurs because the code updates the peer endpoint from unauthenticated messages when the receiver index does not match any session. The flaw enables an attacker to redirect traffic to an arbitrary address, causing denial of service or limited traffic interception without decrypting or forging tunnel content. The vulnerability affects Zephyr versions from 4.4.0 through 4.4.2. A fix removes unauthenticated endpoint updates and restricts handshake initiation to authenticated endpoints or configured endpoints. WireGuard in Zephyr is experimental and not enabled by default.

Zephyr's OpenThread integration used a default, publicly known Joining Device Credential (PSKd) "J01NME" when the joiner autostart feature was enabled but the PSKd was not overridden. This allowed an attacker within radio range to authenticate as a commissioner and provision the device with a malicious operational dataset, effectively taking control of the device's Thread network connection. The vulnerability affects Zephyr versions from 1.14.0 up to but not including 4.5.0. A fix was implemented to remove the default PSKd and enforce build-time checks requiring a unique PSKd when joiner autostart is enabled.

The device multiplexer pseudo-driver in drivers/misc/devmux/devmux.c exposes two system calls, devmux_select_get() and devmux_select_set(). When CONFIG_USERSPACE is enabled, their user-mode verifiers z_vrfy_devmux_select_get() and z_vrfy_devmux_select_set() forwarded directly to the kernel implementations without performing any kernel-object validation — no k_object_access_check() and no driver object check. Compounding this, DEVICE_DT_INST_DEFINE() registered devmux instances with a NULL driver API pointer, which causes scripts/build/gen_kobject_list.py to skip them entirely, so a devmux device had no struct k_object and no permission on it could be granted or withheld in the first place. Any thread running in user mode can reach the defect: device pointers such as DEVICE_DT_GET(DT_NODELABEL(devmux0)) are compile-time constants available to application code, and the syscall accepted them from a thread that had never been granted access to the device. The kernel implementations do validate the pointer against the static devmux instance table and bounds-check the selection index, so this is not a memory-safety issue; the failure is purely one of authorization. Exposure requires CONFIG_USERSPACE=y together with the experimental CONFIG_DEVMUX=y (which depends on CONFIG_DEVICE_MUTABLE) and a zephyr,devmux devicetree node. An unprivileged user-mode thread can read and change which downstream device a multiplexer forwards to, bypassing the userspace object-permission model. Because a devmux forwards the data, configuration and API of the selected device — its documented use being zephyr,console and zephyr,shell-uart switching — an attacker can suppress console, log and shell output, redirect that output to a downstream device it is able to observe, or flip the selection underneath another thread that is legitimately using the multiplexer. The impact is bounded to the devicetree-fixed set of downstream devices; no out-of-bounds access or arbitrary pointer dereference is reachable. The fix declares __subsystem struct devmux_driver_api and attaches a DEVICE_API(devmux, devmux_api) instance to each devmux device so that it becomes a tracked K_OBJ_DRIVER_DEVMUX kernel object, and adds K_OOPS(devmux_inst_get(dev) == SIZE_MAX) plus K_OOPS(k_object_access_check(dev) != 0) to both verifiers.

The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and set to NULL by mctp_i2c_gpio_target_stop(). A controller on the bus can re-enter the same branch of mctp_i2c_gpio_target_stop() with a NULL buffer using two ordinary transactions and no authentication: first a normal packet write to MCTP_I2C_GPIO_RX_MSG_ADDR followed by STOP (which delivers and frees b->rx_pkt), then a bare read transaction followed by STOP. The failing read_requested() call leaves the stale state untouched and the I2C driver still delivers the STOP callback, which then calls mctp_bus_rx() with a NULL packet. The symmetric case exists on the transmit side, where the stale MCTP_I2C_GPIO_TX_MSG_ADDR selection dereferences b->tx_pkt->end after b->tx_pkt has been cleared and additionally signals b->tx_complete a second time, causing the next outbound packet to be dropped. The dereference happens in the I2C target interrupt handler, so on any target that traps accesses to address 0 the result is a fatal exception and a device reset or halt — a denial of service inflicted by any device able to act as controller on the shared management bus (for example compromised firmware on a peer MCTP endpoint or on the BMC). On parts where address 0 is readable, the impact degrades to a malformed packet buffer being handed to the MCTP stack and lost transmit packets. No attacker-controlled value is written and no confidentiality or integrity boundary is crossed. The fix resets b->reg_addr to MCTP_I2C_GPIO_INVALID_ADDR and clears b->rxtx at every STOP, so a new register must be selected before any data phase can run again. Only builds that opt into the experimental CONFIG_MCTP subsystem with CONFIG_MCTP_I2C_GPIO_TARGET=y are affected.

The Nuvoton NPCX eSPI driver parses Target-Attached-Flash (TAF) requests in espi_taf_parse() (drivers/espi/espi_npcx.c), taking the 12-bit length field directly out of the request header in the FLASHRXBUF FIFO. For write and RPMC OP1 requests it copied DIV_ROUND_UP(len, 4) words into struct espi_taf_pckt.src, a fixed 16-word (64-byte) member of a static structure, without ever comparing the length against that buffer or against the negotiated eSPI receive payload size (rx-plsize, 64 bytes on all in-tree NPCX/NPCK SoCs). Both the loop counter and the word count were uint8_t, so the copy ran up to 255 iterations. An eSPI controller that emits a flash request whose header claims a payload larger than the negotiated maximum therefore drives up to 239 32-bit stores past the end of the structure — roughly 956 bytes of out-of-bounds write into .bss — from the eSPI flash receive interrupt handler, while the source reads walk past the end of the 18-word FLASHRXBUF register array into neighbouring eSPI registers. The same unvalidated length was then passed on to flash_write() in espi_taf_npcx_flash_write() with the 64-byte src buffer as source, reading up to 4 KB of adjacent controller SRAM into SPI flash at a host-chosen address, where the host can read it back. A related fixed-size stack buffer in taf_npcx_completion_handler() was overflowed by four bytes on the maximum-size completion path on SoCs whose tx-plsize is 64. The defect is reachable only from the eSPI host side, and only by a request that violates the negotiated payload size, so it requires host firmware or bus-level control rather than ordinary host software; a compliant maximum-length write fits the buffer exactly and is handled correctly. Because TAF exists specifically so that the embedded controller arbitrates host access to shared flash (espi_taf_check_read_protect() / espi_taf_check_write_protect()), corrupting controller memory from a host-supplied field crosses the trust boundary the feature asserts; consequences range from controller crash or hang to corruption of driver state that gates the flash protection regions. The fix widens the counters, rejects any request whose word count exceeds both ARRAY_SIZE(FLASHRXBUF) - NPCX_ESPI_FLASH_HEADER_ADDRESS_LEN and NPCX_TAF_RX_PAYLOAD_WORDS (derived from the devicetree rx-plsize), marks such packets with a new invalid_flag so espi_taf_work() answers them with an unsuccessful completion instead of processing them, bounds the transmit payload against FLASHTXBUF, and adds a default case for unsupported cycle types. Only configurations with CONFIG_ESPI_TAF enabled on an NPCX/NPCK target are affected; no in-tree board enables it by default.

The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive. When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer. The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data. Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region.

The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A remote peer that generates Bluetooth traffic concurrently with the device's own transmissions raises the collision rate. When two senders interleave, the semaphore holder can hand the controller a descriptor whose dataLength comes from one net_buf and whose data pointer comes from another — or one whose buffer has already been returned to its pool. The controller then copies and transmits up to a full HCI/ACL payload starting at a shorter or recycled buffer, disclosing adjacent RAM contents to the connected peer; other interleavings duplicate one HCI packet and silently drop another, disrupting the link. The driver only reads through the shared descriptor, so no memory corruption or write primitive results, and the disclosed bytes are not attacker-chosen. The fix makes the descriptor a local variable in psoc6_bless_send(), removing the shared state; Cy_BLE_SoftHciSendAppPkt() copies the packet before returning, so it need not outlive the call.

The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream object. The same inconsistency is also handed to the config_req(), reconfig_req() and get_config_rsp() application callbacks, where a natural memcpy() of len bytes performs a further out-of-bounds read. Reaching the on-air disclosure requires CONFIG_BT_CLASSIC with CONFIG_BT_A2DP, an AVDTP peer that has completed pairing (the AVDTP L2CAP channel requires BT_SECURITY_L2), and a local endpoint registered for a non-SBC codec — BT_A2DP_MPEG1/BT_A2DP_MPEG2/BT_A2DP_ATRAC/BT_A2DP_VENDOR via BT_A2DP_EP_INIT() — because the SBC branch already pins the IE length to 4 bytes. The bt_a2dp_get_config_cb() response path has no such gate and hands the lying length to any application. There is no out-of-bounds write: the net_buf tailroom check bounds the destination, so the impact is limited to disclosure of a bounded region of adjacent RAM to the peer. The fix replaces the hardcoded BT_A2DP_MAX_IE_LENGTH with the configurable CONFIG_BT_A2DP_CODEC_MAX_IE_LEN (default 8, range 4–253), sizes codec_ie[] from it, and rejects any received IE that exceeds it instead of silently truncating, so len can no longer exceed the number of valid bytes.

The Broadcom AFBR-S50 time-of-flight sensor driver double-completes an RTIO submission when sensor data evaluation fails. In data_ready_work_handler() (drivers/sensor/broadcom/afbr_s50/afbr_s50.c), a non-STATUS_OK return from Argus_EvaluateData() calls handle_error_on_result(), which finalises the request with rtio_iodev_sqe_err(), but execution then fell through to the tail of the function and finalised the very same struct rtio_iodev_sqe a second time with rtio_iodev_sqe_ok(). Unlike the other error branches in the same function, this one did not return. Both completion helpers reach rtio_executor_done() in subsys/rtio/rtio_executor.c, which returns the submission to the pool via rtio_sqe_pool_free() and, for streaming (multishot) submissions, also releases the RX buffer with rtio_release_buffer(). The second completion therefore reads a freed rtio_iodev_sqe, pushes the same mpsc node onto the submission queue while it is already on the pool free list — splicing the two lists together — and re-submits the freed request so the next measurement is written through an already-released buffer. For one-shot submissions it emits a spurious success completion carrying stale userdata and frees the same pool entry twice. The failure branch is driven by sensor conditions rather than by host software. The vendor API documents statuses such as ERROR_ARGUS_BIAS_VOLTAGE_REINIT and ERROR_ARGUS_LASER_MONITOR_INACTIVE as transient results of harsh ambient light, so a party in front of the optical sensor can provoke the invalid-data condition without any physical contact with the board or any software access; SPI transfer errors reach the same branch. In releases before the payload.Status check was dropped, ordinary sharp distance transitions in the sensor's field of view were sufficient. Impact is corruption of the RTIO submission pool and mempool bookkeeping: aliased submissions, writes through released buffers, and duplicate completions delivered to the application. The attacker does not control the corrupted content, so the practical consequence is memory corruption and loss of availability on devices that instantiate brcm,afbr-s50, rather than directed code execution. Only builds that enable this driver are affected.

The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver. Every in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus. The impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device. The fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length.

The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->tx_pending when the RFCOMM DLC goes down. hfp_hf_disconnected() only cancelled the work items and cleared hf->acl, and no other code path ever dequeues those buffers, so each one is permanently lost from the fixed hf_pool (CONFIG_BT_MAX_CONN + 1 buffers, i.e. two in the default configuration). The same function also left BT_HFP_HF_FLAG_CONNECTED set, and hfp_hf_create() wiped the object with memset() as soon as hf->acl was NULL, without checking whether hf->work, hf->slc_work or hf->deferred_work was still pending or running. The remote Audio Gateway peer controls the trigger end to end and needs no application involvement: an unsolicited +BCS: 1 response makes bcs_handle() call bt_hfp_hf_select_codec() and queue an AT+BCS buffer, which cannot be transmitted while BT_HFP_HF_FLAG_RX_ONGOING is set, and an immediately following RFCOMM DISC strands that buffer. Repeating the connect / +BCS / disconnect cycle a couple of times empties hf_pool for good. With the pool exhausted, HFP command sending fails permanently, and because hfp_hf_send_cmd() allocates with K_FOREVER (bt_rfcomm_create_pdu() → bt_conn_create_pdu()) from the Bluetooth RX context — where that timeout is not downgraded to K_NO_WAIT — one further +BCS from the peer parks the Bluetooth RX thread inside net_buf_alloc() with no possible waker, halting all HCI event processing until the device is rebooted. Separately, reusing the HF slot while a work handler was still queued or running allowed memset() to wipe live k_work items out from under the system workqueue, corrupting shared kernel workqueue state. Exploitation requires an established HFP session (for SSP devices L2CAP enforces authentication before the RFCOMM channel is reachable) and a build with CONFIG_BT_HFP_HF enabled.

The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread. An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing. Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service. The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated.

The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound. The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted. With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination.

The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only.

CVE-2026-75085 is a medium severity vulnerability in the STM32WBA IEEE 802.15.4 driver of the Zephyr project. The driver incorrectly computes the packet length of received frames without validating that the length can accommodate the Frame Check Sequence (FCS). This leads to an underflow in the length calculation, causing an out-of-bounds read of adjacent memory when processing malformed frames. The flaw allows an attacker within radio range to influence the length value and potentially cause disclosure of adjacent RAM contents. The issue affects Zephyr versions 4.3.0 through 4.4.2. A fix involves rejecting frames with lengths smaller than the FCS and adding runtime length checks to prevent oversized frames.