CVE-2026-41900VulnerabilityPublished 23 Apr 2026Updated 11 May 2026

OpenLearnX has Critical Remote Code Execution Through Python Sandbox Escape via Code Execution Environment

Affects openlearnxSource GCVE Database

Authoritative record:CVE-2026-41900· High 8.8

Not known to be exploited · CVSS 8.8 High : upgrade to 2.0.3 soon.

Data as of 27 Oct 2026, 00:58 UTC

CVSS 3.1 base score

8.8High

How severe the flaw is on the 0–10 CVSS scale.

Patch: Available – fixed in 2.0.3

CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: Low
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: Low: The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 8 May 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade openlearnx to 2.0.3.

Affected software

Product	Affected	Fixed in
npmopenlearnx	Affected <2.0.3	Fixed in 2.0.3

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

AI-suggested

Upgrade OpenLearnX to version 2.0.3 or later, where this vulnerability has been fixed. Since a patch is available and the issue is resolved in the fixed version, applying this update is the recommended mitigation.

Description

A critical Remote Code Execution (RCE) vulnerability exists in the OpenLearnX code execution environment that allows an attacker to escape the Python sandbox and execute arbitrary commands. This flaw affects versions prior to 2.0.3 and has been fixed in version 2.0.3. The vulnerability has a high severity with a CVSS score of 8.8. No known exploits in the wild have been reported.

CWE-250Execution with Unnecessary Privileges (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs an operation at a privilege level that is higher than the minimum level required, which creates new weaknesses or amplifies the consequences of other weaknesses.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
Architecture and Design · Separation of Privilege
Identify the functionality that requires additional privileges, such as access to privileged operating system resources. Wrap and centralize this functionality if possible, and isolate the privileged code as much as possible from other code.
Architecture and Design · Attack Surface Reduction
Identify the functionality that requires additional privileges, such as access to privileged operating system resources. Wrap and centralize this functionality if possible, and isolate the privileged code as much as possible from other code.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Vulnerable Dependency Management (opens in a new tab)
OWASP ASVS 4.0.3
V1.14.5 (opens in a new tab)
V1.2.1 (opens in a new tab)
V14.2.6 (opens in a new tab)
Attack patterns
Cross Zone Scripting (opens in a new tab)
Expanding Control over the Operating System from the Database (opens in a new tab)
Target Programs with Elevated Privileges (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-284Improper Access Control (opens in a new tab)
Pillar weaknessCWE Top 25 (2025): #19OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
Attack patterns
Embedding Scripts within Scripts (opens in a new tab)
Modification of Windows Service Configuration (opens in a new tab)
Malicious Root Certificate (opens in a new tab)
Intent Spoof (opens in a new tab)
WebView Exposure (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-693Protection Mechanism Failure (opens in a new tab)
Pillar weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not use or incorrectly uses a protection mechanism that provides sufficient defense against directed attacks against the product.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
Attack patterns
Accessing Functionality Not Properly Constrained by ACLs (opens in a new tab)
Cross Site Tracing (opens in a new tab)
Directory Indexing (opens in a new tab)
Using Malicious Files (opens in a new tab)
Encryption Brute Forcing (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-78Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #9OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an OS command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended OS command when it is sent to a downstream component.
Architecture and Design
If at all possible, use library calls rather than external processes to recreate the desired functionality.
Architecture and Design · Operation · Sandbox or Jail
Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software.
Architecture and Design · Attack Surface Reduction
For any data that will be used to generate a command to be executed, keep as much of that data out of external control as possible. For example, in web applications, this may require storing the data locally in the session's state instead of sending it out to the client in a hidden form field.
OWASP Cheat Sheets
Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OS Command Injection Defense (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.5 (opens in a new tab)
V5.3.8 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Command Line Execution through SQL Injection (opens in a new tab)
Command Delimiters (opens in a new tab)
Exploiting Multiple Input Interpretation Layers (opens in a new tab)
Argument Injection (opens in a new tab)
OS Command Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-94Improper Control of Generation of Code ('Code Injection') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #10OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of a code segment using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the syntax or behavior of the intended code segment.
Architecture and Design · Refactoring
Refactor your program so that you do not have to dynamically generate code.
Architecture and Design
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which code can be executed by your product.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Server Side Request Forgery Prevention (opens in a new tab)
Unvalidated Redirects and Forwards (opens in a new tab)
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V5.2.8 (opens in a new tab)
V5.2.5 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
Leverage Executable Code in Non-Executable Files (opens in a new tab)
Manipulating User-Controlled Variables (opens in a new tab)
Code Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 27 Oct 2026, 00:58 UTC

WeaknessesCWE-250, CWE-284, CWE-693 +2

Technical details

References

Community reviews

Related threats