CVE-2026-14199VulnerabilityPublished 5 Nov 2026

Red Hat Security Advisory: Multicluster Global Hub 1.7.4 security update

Affects Red HatSource GCVE Database

Compare

Authoritative record:CVE-2026-14199· High 7.1

Not known to be exploited · CVSS 7.1 High · fixed in Red Hat package updates : patch Red Hat soon.

Data as of 6 Nov 2026, 11:23 UTC

CVSS 3.1 base score

7.1High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.3% chance of exploitation in 30 days – higher than 25% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 1.7.4

CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:L

Attack Vector: Network
Attack Complexity: High
Privileges Required: Low
User Interaction: None
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: Low

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: Low: The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: Low: Performance is reduced or there are interruptions in resource availability. Even if repeated exploitation of the vulnerability is possible, the attacker does not have the ability to completely deny service to legitimate users. The resources in the impacted component are either partially available all of the time, or fully available only some of the time, but overall there is no direct, serious consequence to the impacted component.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 2 Sep 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 6 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
GrafanaGrafana Enterprise	Affected >=11.0.0 <=11.6.17 >=12.0.0 <=12.2.11 >=12.3.0 <=12.3.11 >=12.4.0 <=12.4.9 >=13.0.0 <=13.0.7 >=13.1.0 <=13.1.4 >=13.2.0 <=13.2.0	Fixed in–
GrafanaGrafana OSS	Affected >=11.0.0 <=11.6.17 >=12.0.0 <=12.2.11 >=12.3.0 <=12.3.11 >=12.4.0 <=12.4.9 >=13.0.0 <=13.0.7 >=13.1.0 <=13.1.4 >=13.2.0 <=13.2.0	Fixed in–

AI-suggested

Red Hat has released Multicluster Global Hub version 1.7.4 containing security fixes and updated container images. Users should upgrade to version 1.7.4 to remediate the vulnerabilities. The vendor manages remediation for this product via updated images and official releases. Refer to the Red Hat Advanced Cluster Management for Kubernetes documentation and the official Red Hat advisory (RHSA-2026:95517) for detailed upgrade instructions and further guidance.

Description

Red Hat issued a security advisory for Multicluster Global Hub version 1.7.4, addressing multiple vulnerabilities. The Multicluster Global Hub enables management of multiple hub clusters from a single cluster. The update includes security fixes and updated container images. Red Hat rates the security impact as Important (high severity). The advisory references multiple CVEs but does not specify individual vulnerability details or fixed versions.

Impact

The vulnerabilities affect the Multicluster Global Hub component, potentially impacting the security of cluster management operations. The advisory rates the impact as Important (high severity), indicating significant security concerns. No active exploitation in the wild is reported. The lack of detailed vulnerability descriptions limits precise impact analysis, but the presence of multiple CWEs suggests a range of issues including access control, information exposure, and memory safety.

CWE-639Authorization Bypass Through User-Controlled Key (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #24OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The system's authorization functionality does not prevent one user from gaining access to another user's data or record by modifying the key value identifying the data.
Architecture and Design
For each and every data access, ensure that the user has sufficient privilege to access the record that is being requested.
Architecture and Design · Implementation
Make sure that the key that is used in the lookup of a specific user's record is not controllable externally by the user or that any tampering can be detected.
Architecture and Design
Use encryption in order to make it more difficult to guess other legitimate values of the key or associate a digital signature with the key so that the server can verify that there has been no tampering.
OWASP Cheat Sheets
Access Control (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Insecure Direct Object Reference Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V4.1.2 (opens in a new tab)
V4.2.1 (opens in a new tab)
V8.3.8 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.3.1 (opens in a new tab)
Attack patterns
Path Traversal (opens in a new tab)
Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
Using Escaped Slashes in Alternate Encoding (opens in a new tab)
Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-551Incorrect Behavior Order: Authorization Before Parsing and Canonicalization (opens in a new tab)
Base weakness
If a web server does not fully parse requested URLs before it examines them for authorization, it may be possible for an attacker to bypass authorization protection.
Architecture and Design
URL Inputs should be decoded and canonicalized to the application's current internal representation before being validated and processed for authorization. Make sure that your application does not decode the same input twice.
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
V7.2.2 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.3 (opens in a new tab)
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
Attack patterns
Forced Integer Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-823Use of Out-of-range Pointer Offset (opens in a new tab)
Base weakness
The product performs pointer arithmetic on a valid pointer, but it uses an offset that can point outside of the intended range of valid memory locations for the resulting pointer.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Pointer Manipulation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-306Missing Authentication for Critical Functionality (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #21OWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not perform any authentication for functionality that requires a provable user identity or consumes a significant amount of resources.
Architecture and Design
Divide the software into anonymous, normal, privileged, and administrative areas. Identify which of these areas require a proven user identity, and use a centralized authentication capability.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Architecture and Design
Where possible, avoid implementing custom, "grow-your-own" authentication routines and consider using authentication capabilities as provided by the surrounding framework, operating system, or environment.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V1.2.3 (opens in a new tab)
V1.2.2 (opens in a new tab)
V1.2.4 (opens in a new tab)
Attack patterns
Choosing Message Identifier (opens in a new tab)
Force the System to Reset Values (opens in a new tab)
Using Unpublished Interfaces or Functionality (opens in a new tab)
Cross Site Request Forgery (opens in a new tab)
Communication Channel Manipulation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-476NULL Pointer Dereference (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #13OWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product dereferences a pointer that it expects to be valid but is NULL.
Implementation
For any pointers that could have been modified or provided from a function that can return NULL, check the pointer for NULL before use. When working with a multithreaded or otherwise asynchronous environment, ensure that proper locking APIs are used to lock before the check, and unlock when it has finished.
Requirements
Select a programming language that is not susceptible to these issues.
Implementation
Check the results of all functions that return a value and verify that the value is non-null before acting upon it.
OWASP Cheat Sheets
Logging (opens in a new tab)
Error Handling (opens in a new tab)
OWASP ASVS 4.0.3
V11.1.7 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1285Improper Validation of Specified Index, Position, or Offset in Input (opens in a new tab)
Base weakness
The product receives input that is expected to specify an index, position, or offset into an indexable resource such as a buffer or file, but it does not validate or incorrectly validates that the specified index/position/offset has the required properties.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-326Inadequate Encryption Strength (opens in a new tab)
Class weaknessOWASP Top 10 A04:2025: Cryptographic Failures (opens in a new tab)
The product stores or transmits sensitive data using an encryption scheme that is theoretically sound, but is not strong enough for the level of protection required.
Architecture and Design
Use an encryption scheme that is currently considered to be strong by experts in the field.
OWASP Cheat Sheets
Cryptographic Storage (opens in a new tab)
Key Management (opens in a new tab)
Transport Layer Protection (opens in a new tab)
User Privacy Protection (opens in a new tab)
Password Storage (opens in a new tab)
OWASP ASVS 4.0.3
V2.8.3 (opens in a new tab)
V6.2.7 (opens in a new tab)
V6.2.4 (opens in a new tab)
Attack patterns
Encryption Brute Forcing (opens in a new tab)
Brute Force (opens in a new tab)
Protocol Analysis (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1287Improper Validation of Specified Type of Input (opens in a new tab)
Base weakness
The product receives input that is expected to be of a certain type, but it does not validate or incorrectly validates that the input is actually of the expected type.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
OWASP Cheat Sheets
Transport Layer Protection (opens in a new tab)
TLS Cipher String (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V9.2.1 (opens in a new tab)
V1.9.2 (opens in a new tab)
V2.8.5 (opens in a new tab)
Attack patterns
Creating a Rogue Certification Authority Certificate (opens in a new tab)
Signature Spoofing by Improper Validation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:95517
Vendor Severity: high
CVE Count: 16
Additional Cves: CVE-2026-15815, CVE-2026-17183, CVE-2026-39834, CVE-2026-42127, CVE-2026-63209, CVE-2026-73501, CVE-2026-73502, CVE-2026-76905, CVE-2026-77354, CVE-2026-77405, CVE-2026-77411, CVE-2026-84445, CVE-2026-88031, CVE-2026-92542, CVE-2026-92543

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 6 Nov 2026, 08:22 UTC

WeaknessesCWE-639, CWE-22, CWE-551 +11

Technical details

References

Community reviews

Related threats