Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement update
Affects Red HatSource GCVE Database
Not known to be exploited · CVSS 5.9 Medium.
Data as of 6 Nov 2026, 11:23 UTC
Thin evidence
One scorer or none| CNA (oracle) | CVSS 3.1 | 5.9 |
|---|
- EPSS
- 0.2% chance of exploitation in 30 days – higher than 21% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N- Attack Vector
- Network
- Attack Complexity
- High
- Privileges Required
- None
- User Interaction
- None
- Scope
- Unchanged
- Confidentiality
- None
- Integrity
- High
- Availability
- None
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: High
- A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
- Privileges Required: None
- The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
- User Interaction: None
- The vulnerable system can be exploited without any interaction from any user.
- Scope: Unchanged
- An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
- Confidentiality: None
- There is no loss of confidentiality within the impacted component.
- Integrity: High
- There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
- Availability: None
- There is no impact to availability within the impacted component.
Definitions: FIRST CVSS v3.1 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 20 Oct 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 6 Nov 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponized
- A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| Oracle CorporationOracle Java SE | Affected
| Fixed in– |
| Oracle CorporationOracle GraalVM for JDK | Affected
| Fixed in– |
| Oracle CorporationOracle GraalVM Enterprise Edition | Affected
| Fixed in– |
Mavencom.oracle.java/java-sepkg:maven/com.oracle.java/java-seOther threats | Affected
| Fixed in– |
Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.
AI-suggested
A fix is available through the updated Red Hat Hardened Images RPMs, specifically the java-21-openjdk packages at version 21.0.13.0.9-0.1.hum1. Users should apply these updates as provided by Red Hat via https://images.redhat.com/. No additional mitigation steps are specified in the advisory.
Description
Red Hat has issued a security advisory for Red Hat Hardened Images RPMs, including updates to multiple java-21-openjdk packages. The advisory addresses a critical severity vulnerability identified as CVE-2026-83374 among others. The update provides bug fixes and enhancements to these RPMs. No specific affected versions are detailed in the advisory. The advisory references a vendor update available from Red Hat's image repository.
Impact
The vulnerability is rated critical, indicating a potentially severe impact if exploited. However, the advisory does not provide explicit details on the nature of the impact or exploitation scenarios. The update addresses multiple CVEs, suggesting a broad range of security issues fixed in this release.
- CWE-358Improperly Implemented Security Check for Standard (opens in a new tab)
Base weakness
The product does not implement or incorrectly implements one or more security-relevant checks as specified by the design of a standardized algorithm, protocol, or technique.
- CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-733Compiler Optimization Removal or Modification of Security-critical Code (opens in a new tab)
Base weakness
The developer builds a security-critical protection mechanism into the software, but the compiler optimizes the program such that the mechanism is removed or modified.
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-90Improper Neutralization of Special Elements used in an LDAP Query (LDAP Injection) (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs all or part of an LDAP query using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended LDAP query when it is sent to a downstream component.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-303Incorrect Implementation of Authentication Algorithm (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The requirements for the product dictate the use of an established authentication algorithm, but the implementation of the algorithm is incorrect.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-611Improper Restriction of XML External Entity Reference (opens in a new tab)
Base weaknessOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product processes an XML document that can contain XML entities with URIs that resolve to documents outside of the intended sphere of control, causing the product to embed incorrect documents into its output.
Implementation · System Configuration
Many XML parsers and validators can be configured to disable external entity expansion.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-444Inconsistent Interpretation of HTTP Requests (HTTP Request Smuggling) (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product acts as an intermediary HTTP agent (such as a proxy or firewall) in the data flow between two entities such as a client and server, but it does not interpret malformed HTTP requests or responses in ways that are consistent with how the messages will be processed by those entities that are at the ultimate destination.
Implementation
Use a web server that employs a strict HTTP parsing procedure, such as Apache.
Implementation
Use only SSL communication.
Implementation
Terminate the client session after each request.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-776Improper Restriction of Recursive Entity References in DTDs (Billion Laughs Attack) (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-91XML Injection (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not properly neutralize special elements that are used in XML, allowing attackers to modify the syntax, content, or commands of the XML before it is processed by an end system.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
- Path Traversal (opens in a new tab)
- Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
- Manipulating Web Input to File System Calls (opens in a new tab)
- Using Escaped Slashes in Alternate Encoding (opens in a new tab)
- Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-93Improper Neutralization of CRLF Sequences (CRLF Injection) (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product uses CRLF (carriage return line feeds) as a special element, e.g. to separate lines or records, but it does not neutralize or incorrectly neutralizes CRLF sequences from inputs.
Implementation
Avoid using CRLF as a special sequence.
Implementation
Appropriately filter or quote CRLF sequences in user-controlled input.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-354Improper Validation of Integrity Check Value (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product does not validate or incorrectly validates the integrity check values or "checksums" of a message.
Implementation
The protocol specification describes the algorithm used for calculating the checksum. It is then a matter of implementing the calculation and verifying that the calculated checksum and the received checksum match.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-653Improper Isolation or Compartmentalization (opens in a new tab)
Class weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not properly compartmentalize or isolate functionality, processes, or resources that require different privilege levels, rights, or permissions.
Architecture and Design
Break up privileges between different modules, objects, or entities. Minimize the interfaces between modules and require strong access control between them.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-749Exposed Dangerous Method or Function (opens in a new tab)
Base weaknessLikelihood of exploit: LowOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product provides an Applications Programming Interface (API) or similar interface for interaction with external actors, but the interface includes a dangerous method or function that is not properly restricted.
Architecture and Design
If you must expose a method, make sure to perform input validation on all arguments, limit access to authorized parties, and protect against all possible vulnerabilities.
Architecture and Design · Implementation · Attack Surface Reduction
Identify all exposed functionality. Explicitly list all functionality that must be exposed to some user or set of users. Identify which functionality may be: accessible to all users; restricted to a small set of privileged users; prevented from being directly accessible at all
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-524Use of Cache Containing Sensitive Information (opens in a new tab)
Base weakness
The code uses a cache that contains sensitive information, but the cache can be read by an actor outside of the intended control sphere.
Architecture and Design
Protect information stored in cache.
Architecture and Design
Do not store unnecessarily sensitive information in the cache.
Architecture and Design
Consider using encryption in the cache.
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-488Exposure of Data Element to Wrong Session (opens in a new tab)
Base weakness
The product does not sufficiently enforce boundaries between the states of different sessions, causing data to be provided to, or used by, the wrong session.
Architecture and Design
Protect the application's sessions from information leakage. Make sure that a session's data is not used or visible by other sessions.
Testing
Use a static analysis tool to scan the code for information leakage vulnerabilities (e.g. Singleton Member Field).
Architecture and Design
In a multithreading environment, storing user data in Servlet member fields introduces a data access race condition. Do not use member fields to store information in the Servlet.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-835Name not in the CWE catalogue (opens in a new tab)
- CWE-1025Name not in the CWE catalogue (opens in a new tab)
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2026:94403
- Vendor Severity
- critical
- CVE Count
- 39
- Additional Cves
- CVE-2026-83376, CVE-2026-83378, CVE-2026-83380, CVE-2026-83381, CVE-2026-83387, CVE-2026-83395, CVE-2026-83400, CVE-2026-87290, CVE-2026-87291, CVE-2026-87292, CVE-2026-87294, CVE-2026-87367, CVE-2026-91332, CVE-2026-91333, CVE-2026-91334, CVE-2026-91335, CVE-2026-91373, CVE-2026-91374, CVE-2026-91375, CVE-2026-91379, CVE-2026-91380, CVE-2026-91394, CVE-2026-91397, CVE-2026-91398, CVE-2026-91400, CVE-2026-91403, CVE-2026-91410, CVE-2026-91415, CVE-2026-91418, CVE-2026-91451, CVE-2026-91452, CVE-2026-91453, CVE-2026-91461, CVE-2026-91462, CVE-2026-91463, CVE-2026-91464, CVE-2026-91487, CVE-2026-101516
References
- access.redhat.com/errata/RHSA-2026:94403 (opens in a new tab)
- images.redhat.com (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91403 (opens in a new tab)
- access.redhat.com/security/updates/classification/ (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-87291 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91335 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91333 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91461 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91394 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-87290 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-83378 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-87367 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-83395 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-87292 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91332 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-83380 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91463 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91400 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91451 (opens in a new tab)
- access.redhat.com/security/cve/CVE-2026-91464 (opens in a new tab)
Community reviews
Related threats
- Red Hat Security Advisory: Satellite 6.17 security updateCriticalVulnerability
- Red Hat Security Advisory: Satellite 6.18 security updateCriticalVulnerability
- Red Hat Security Advisory: Satellite 6.16 EUS security updateCriticalVulnerability
- Red Hat Security Advisory: Red Hat build of Keycloak 26.6.8 Security UpdateHighVulnerability
- Red Hat Security Advisory: Multicluster Global Hub 1.7.4 security updateHighVulnerability