Red Hat Security Advisory: Satellite 6.18 security update
Affects Red Hat Satellite 6.18Source GCVE Database
Not known to be exploited · CVSS 8.8 High →: upgrade Red Hat django to 6.0.8 or 5.2.17 soon.
Data as of 6 Nov 2026, 11:23 UTC
- EPSS
- 1.1% chance of exploitation in 30 days – higher than 66% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
- Patch
- Available – fixed in 6.0.8, 5.2.17
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H- Attack Vector
- Network
- Attack Complexity
- Low
- Privileges Required
- Low
- User Interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
Bold values are the worst case: easiest to exploit or largest impact.
- Attack Vector: Network
- The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
- Attack Complexity: Low
- Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
- Privileges Required: Low
- The attacker is authorized with (i.e., requires) privileges that provide basic user capabilities that could normally affect only settings and files owned by a user. Alternatively, an attacker with Low privileges may have the ability to cause an impact only to non-sensitive resources.
- User Interaction: None
- The vulnerable system can be exploited without any interaction from any user.
- Scope: Unchanged
- An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
- Confidentiality: High
- There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
- Integrity: High
- There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
- Availability: High
- There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
Definitions: FIRST CVSS v3.1 specification.
Exploitation evidence
Disclosed: evidence found.
CVE published 4 Aug 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors
A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 6 Nov 2026.
- Disclosed
- The CVE record is public on cve.org. Its publication is t = 0.
- Detectable
- A public nuclei template can find exposed instances, for defenders and attackers alike.
- Weaponized
- A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
- Exploited in the wild
- CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
- Observed by OffSeq Mirage
- OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.
Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.
What to do
Upgrade Django and django to 6.0.8 or 5.2.17.
Affected software
| Product | Affected | Fixed in |
|---|---|---|
| djangoprojectDjango | Affected
| Fixed in
|
| djangoprojectDjango | Affected
| Fixed in
|
PyPIdjangopkg:pypi/djangoOther threats | Affected
| Fixed in
|
Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.
AI-suggested
A security update for Red Hat Satellite 6.18 is available and should be applied to address these vulnerabilities. Before applying this update, ensure all previously released errata relevant to your system have been applied. Follow Red Hat's official guidance for applying the update as detailed in their advisory at https://access.redhat.com/articles/11258. No additional mitigations are specified beyond applying the provided patches.
Description
Red Hat Satellite 6.18 has received a critical security update addressing multiple vulnerabilities across several Python packages including Django, Brotli, urllib3, Pillow, GitPython, and others. These vulnerabilities include remote code execution, arbitrary code execution, denial of service, information disclosure, and memory corruption issues. The update fixes issues such as remote code execution via GeoDjango spatial lookups, heap buffer overflows in image processing libraries, arbitrary file read and code execution in GitPython, and denial of service via crafted inputs in various components. The advisory recommends applying the update after ensuring all previous errata are applied.
Impact
The vulnerabilities fixed in this update impact Red Hat Satellite 6.18 by allowing attackers to execute arbitrary code remotely, cause denial of service conditions, read arbitrary files, intercept traffic, and potentially disclose sensitive information. The presence of remote code execution flaws in Django and GitPython components is particularly critical, as it could allow full system compromise. Denial of service issues in image processing and parsing libraries could disrupt service availability. The update mitigates these risks by patching the underlying flaws.
- CWE-434Unrestricted Upload of File with Dangerous Type (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #12OWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product allows the upload or transfer of dangerous file types that are automatically processed within its environment.
Architecture and Design
Generate a new, unique filename for an uploaded file instead of using the user-supplied filename, so that no external input is used at all.
Architecture and Design · Enforcement by Conversion
When the set of acceptable objects, such as filenames or URLs, is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames or URLs, and reject all other inputs.
Architecture and Design
Consider storing the uploaded files outside of the web document root entirely. Then, use other mechanisms to deliver the files dynamically.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-22Improper Limitation of a Pathname to a Restricted Directory (Path Traversal) (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #6OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
- Path Traversal (opens in a new tab)
- Using Slashes and URL Encoding Combined to Bypass Validation Logic (opens in a new tab)
- Manipulating Web Input to File System Calls (opens in a new tab)
- Using Escaped Slashes in Alternate Encoding (opens in a new tab)
- Using Slashes in Alternate Encoding (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1333Inefficient Regular Expression Complexity (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product uses a regular expression with a worst-case computational complexity that is inefficient and possibly exponential.
Architecture and Design
Use regular expressions that do not support backtracking, e.g. by removing nested quantifiers.
System Configuration
Set backtracking limits in the configuration of the regular expression implementation, such as PHP's pcre.backtrack_limit. Also consider limits on execution time for the process.
Implementation
Do not use regular expressions with untrusted input. If regular expressions must be used, avoid using backtracking in the expression.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-415Double Free (opens in a new tab)
Variant weaknessLikelihood of exploit: High
The product calls free() twice on the same memory address.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
Ensure that each allocation is freed only once. After freeing a chunk, set the pointer to NULL to ensure the pointer cannot be freed again. In complicated error conditions, be sure that clean-up routines respect the state of allocation properly.
Implementation
Use a static analysis tool to find double free instances.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-606Unchecked Input for Loop Condition (opens in a new tab)
Base weakness
The product does not properly check inputs that are used for loop conditions, potentially leading to a denial of service or other consequences because of excessive looping.
Implementation
Do not use user-controlled data for loop conditions.
Implementation
Perform input validation.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-295Improper Certificate Validation (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not validate, or incorrectly validates, a certificate.
Architecture and Design · Implementation
Certificates should be carefully managed and checked to assure that data are encrypted with the intended owner's public key.
Implementation
If certificate pinning is being used, ensure that all relevant properties of the certificate are fully validated before the certificate is pinned, including the hostname.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-88Improper Neutralization of Argument Delimiters in a Command (Argument Injection) (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product constructs a string for a command to be executed by a separate component in another control sphere, but it does not properly delimit the intended arguments, options, or switches within that command string.
Implementation · Parameterization
Where possible, avoid building a single string that contains the command and its arguments. Some languages or frameworks have functions that support specifying independent arguments, e.g. as an array, which is used to automatically perform the appropriate quoting or escaping while building the command.
Architecture and Design · Input Validation
Understand all the potential areas where untrusted inputs can enter your product: parameters or arguments, cookies, anything read from the network, environment variables, request headers as well as content, URL components, e-mail, files, databases, and any external systems that provide data to the application.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-835Loop with Unreachable Exit Condition (Infinite Loop) (opens in a new tab)
Base weakness
The product contains an iteration or loop with an exit condition that cannot be reached, i.e., an infinite loop.
- CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-124Buffer Underwrite (Buffer Underrun) (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product writes to a buffer using an index or pointer that references a memory location prior to the beginning of the buffer.
Requirements
Choose a language that is not susceptible to these issues.
Implementation
All calculated values that are used as index or for pointer arithmetic should be validated to ensure that they are within an expected range.
- OWASP Cheat Sheets
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-1341Multiple Releases of Same Resource or Handle (opens in a new tab)
Base weakness
The product attempts to close or release a resource or handle more than once, without any successful open between the close operations.
Implementation
Change the code's logic so that the resource is only closed once. This might require simplifying or refactoring. This fix can be simple to do in small code blocks, but more difficult when multiple closes are buried within complex conditionals.
Implementation · Refactoring
It can be effective to implement a flag that is (1) set when the resource is opened, (2) cleared when it is closed, and (3) checked before closing. This approach can be useful when there are disparate cases in which closes must be performed.
Implementation · Refactoring
When closing a resource, set the resource's associated variable to NULL or equivalent value for the given language. Some APIs will ignore this null value without causing errors.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-476NULL Pointer Dereference (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #13OWASP Top 10 A10:2025: Mishandling of Exceptional Conditions (opens in a new tab)
The product dereferences a pointer that it expects to be valid but is NULL.
Implementation
For any pointers that could have been modified or provided from a function that can return NULL, check the pointer for NULL before use. When working with a multithreaded or otherwise asynchronous environment, ensure that proper locking APIs are used to lock before the check, and unlock when it has finished.
Requirements
Select a programming language that is not susceptible to these issues.
Implementation
Check the results of all functions that return a value and verify that the value is non-null before acting upon it.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
- OWASP Cheat Sheets
- OWASP ASVS 4.0.3
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-763Release of Invalid Pointer or Reference (opens in a new tab)
Base weakness
The product attempts to return a memory resource to the system, but it calls the wrong release function or calls the appropriate release function incorrectly.
Implementation
Only call matching memory management functions. Do not mix and match routines. For example, when you allocate a buffer with malloc(), dispose of the original pointer with free().
Implementation
When programming in C++, consider using smart pointers provided by the boost library to help correctly and consistently manage memory.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-908Use of Uninitialized Resource (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product uses or accesses a resource that has not been initialized.
Implementation
Explicitly initialize the resource before use. If this is performed through an API function or standard procedure, follow all required steps.
Implementation
Pay close attention to complex conditionals that affect initialization, since some branches might not perform the initialization.
Implementation
Avoid race conditions (CWE-362) during initialization routines.
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- CWE-73External Control of File Name or Path (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product allows user input to control or influence paths or file names that are used in filesystem operations.
Architecture and Design
When the set of filenames is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames, and reject all other inputs. For example, ID 1 could map to "inbox.txt" and ID 2 could map to "profile.txt".
Architecture and Design · Operation
Run your code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict all access to files within a particular directory.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
- OWASP Cheat Sheets
- Attack patterns
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
- GCVE source
- db.gcve.eu
- Csaf Category
- csaf_security_advisory
- Csaf Version
- 2.0
- Publisher
- Red Hat Product Security
- Advisory ID
- RHSA-2026:95657
- Vendor Severity
- critical
- CVE Count
- 39
- Additional Cves
- CVE-2026-73619, CVE-2026-78677, CVE-2026-87819, CVE-2026-89078, CVE-2026-93577, CVE-2026-96640, CVE-2026-96643, CVE-2026-96778, CVE-2026-97229, CVE-2026-97687, CVE-2026-97689, CVE-2026-104895, CVE-2026-110264, CVE-2026-110856, CVE-2026-110857, CVE-2026-110858, CVE-2026-110859, CVE-2026-111497, CVE-2026-112390, CVE-2026-112391, CVE-2026-112392, CVE-2026-112393, CVE-2026-112397, CVE-2026-112398, CVE-2026-112399, CVE-2026-112400, CVE-2026-112402, CVE-2026-112403, CVE-2026-112404, CVE-2026-112405, CVE-2026-112406, CVE-2026-112892, CVE-2026-112893, CVE-2026-112894, CVE-2026-112895, CVE-2026-112896, CVE-2026-112897, CVE-2026-114145
References
- access.redhat.com/errata/RHSA-2026:95657 (opens in a new tab)
- access.redhat.com/security/updates/classification/ (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2511095 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2515265 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2523215 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2530742 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2539836 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2539842 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2543245 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2543255 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2550153 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2552959 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2552966 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2552977 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2552989 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2555846 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2555848 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2555851 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2555859 (opens in a new tab)
- bugzilla.redhat.com/show_bug.cgi?id=2555863 (opens in a new tab)
Community reviews
Related threats
- Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement updateCriticalVulnerability
- Red Hat Security Advisory: OpenJDK 11.0.33 ELS Security Update For Portable Linux BuildsCriticalVulnerability
- Red Hat Security Advisory: Multicluster Global Hub 1.7.4 security updateHighVulnerability
- Red Hat Security Advisory: Red Hat Build of Apache Camel 4.18 for Quarkus 3.33 update is now available (RHBQ 3.33.4.GA)HighVulnerability
- Red Hat Security Advisory: thunderbird security, bug fix, and enhancement updateHighVulnerability