CVE-2026-58280VulnerabilityPublished 22 Oct 2026Updated 26 Oct 2026

Red Hat Security Advisory: .NET 9.0 security update

Affects Red Hat .NET 9.0Source GCVE Database

Mentioned vulnerabilities

Authoritative record:CVE-2026-58280· High 7.5

Not known to be exploited · CVSS 7.5 High · fixed in Red Hat package updates : patch Red Hat microsoft.net soon.

Data as of 26 Oct 2026, 17:16 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 1.2% chance of exploitation in 30 days – higher than 69% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.
Patch: Available – fixed in 10.0.13, 11.0.0-rc.2, 8.0.32 +6

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C

Base metrics

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Temporal metrics

Exploit Code Maturity: Unproven
Remediation Level: Official Fix
Report Confidence: Confirmed

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).
Exploit Code Maturity: Unproven: No exploit code is available, or an exploit is theoretical.
Remediation Level: Official Fix: A complete vendor solution is available. Either the vendor has issued an official patch, or an upgrade is available.
Report Confidence: Confirmed: Detailed reports exist, or functional reproduction is possible (functional exploits may provide this). Source code is available to independently verify the assertions of the research, or the author or vendor of the affected code has confirmed the presence of the vulnerability.

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 13 Oct 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Upgrade to a fixed release listed under Affected software.

Affected software

Product	Affected	Fixed in
Microsoft.NET 10.0 runtime	Affected >=10.0.0 <10.0.13	Fixed in 10.0.13
Microsoft.NET 11.0 runtime	Affected >=11.0.0 <11.0.0-rc.2	Fixed in 11.0.0-rc.2
Microsoft.NET 8.0 runtime	Affected >=8.0.0 <8.0.32	Fixed in 8.0.32
Microsoft.NET 9.0 runtime	Affected >=9.0.0 <9.0.21	Fixed in 9.0.21
MicrosoftMicrosoft .NET Framework 3.5	Affected =3.5.0	Fixed in–
MicrosoftMicrosoft .NET Framework 3.5 AND 4.6.2/4.7/4.7.1/4.7.2	Affected =3.0.0.0	Fixed in–

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

Description

.NET is a fast, lightweight and modular platform for creating cross platform applications that work on Linux, macOS and Windows. It particularly focuses on creating console applications, web applications and micro-services. .NET contains a runtime conforming to .NET Standards a set of framework libraries, an SDK containing compilers and a 'dotnet' application to drive everything. SDK version: 9.0.122 Runtime version: 9.0.21 Security Fix(es): * dotnet10.0: dotnet9.0: dotnet8.0: .NET Information Disclosure Vulnerability (CVE-2026-58649) * dotnet10.0: dotnet9.0: .NET Elevation of Privilege Vulnerability (CVE-2026-69806) * dotnet10.0: dotnet9.0: dotnet: dotnet8.0: .NET Denial of Service Vulnerability (CVE-2026-58280) * dotnet10.0: dotnet8.0: dotnet9.0: dotnet: .NET Information Disclosure Vulnerability (CVE-2026-66822) * dotnet9.0: dotnet: dotnet10.0: dotnet8.0: .NET Denial of Service Vulnerability (CVE-2026-69651) * dotnet8.0: dotnet10.0: dotnet: dotnet9.0: ASP.NET Core Denial of Service Vulnerability (CVE-2026-70159) * dotnet10.0: dotnet8.0: dotnet9.0: ASP.NET Core Elevation of Privilege Vulnerability (CVE-2026-70175) * dotnet10.0: dotnet8.0: dotnet9.0: ASP.NET Core Elevation of Privilege Vulnerability (CVE-2026-70179) * dotnet9.0: dotnet8.0: dotnet10.0: ASP.NET Core Denial of Service Vulnerability (CVE-2026-70181) * dotnet: dotnet10.0: dotnet9.0: dotnet8.0: ASP.NET Core Elevation of Privilege Vulnerability (CVE-2026-70183) * dotnet10.0: dotnet9.0: dotnet8.0: ASP.NET Core Denial of Service Vulnerability (CVE-2026-70186) * dotnet: ASP.NET Core Security Feature Bypass Vulnerability (CVE-2026-70188) * dotnet9.0: dotnet8.0: dotnet10.0: ASP.NET Core Denial of Service Vulnerability (CVE-2026-70196) * dotnet: ASP.NET Core Tampering Vulnerability (CVE-2026-88092) * dotnet10.0: dotnet8.0: dotnet9.0: dotnet: MessagePack: Nested arrays can blow past buffer length limits (CVE-2026-92707) * dotnet: dotnet8.0: dotnet9.0: dotnet10.0: .NET Elevation of Privilege Vulnerability (CVE-2026-96225) * dotnet9.0: dotnet10.0: dotnet8.0: dotnet: ASP.NET Core Remote Code Execution Vulnerability (CVE-2026-96230) * dotnet: dotnet9.0: dotnet10.0: dotnet8.0: .NET Elevation of Privilege Vulnerability (CVE-2026-96231) * dotnet10.0: dotnet: dotnet8.0: dotnet9.0: ASP.NET Core Denial of Service Vulnerability (CVE-2026-96233) * dotnet: dotnet10.0: dotnet9.0: dotnet8.0: ASP.NET Core Denial of Service Vulnerability (CVE-2026-96236) * dotnet8.0: dotnet10.0: dotnet9.0: .NET Remote Code Execution Vulnerability (CVE-2026-96237) * dotnet8.0: dotnet10.0: dotnet9.0: dotnet: .NET Security Feature Bypass Vulnerability (CVE-2026-96238) For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.

CWE-776Improper Restriction of Recursive Entity References in DTDs ('XML Entity Expansion') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A02:2025: Security Misconfiguration (opens in a new tab)
The product uses XML documents and allows their structure to be defined with a Document Type Definition (DTD), but it does not properly control the number of recursive definitions of entities.
Operation
If possible, prohibit the use of DTDs or use an XML parser that limits the expansion of recursive DTD entities.
Implementation
Before parsing XML files with associated DTDs, scan for recursive entity declarations and do not continue parsing potentially explosive content.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.1 (opens in a new tab)
Attack patterns
Exponential Data Expansion (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-201Insertion of Sensitive Information Into Sent Data (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The code transmits data to another actor, but a portion of the data includes sensitive information that should not be accessible to that actor.
Requirements
Specify which data in the software should be regarded as sensitive. Consider which types of users should have access to which types of data.
Implementation
Ensure that any possibly sensitive data specified in the requirements is verified with designers to ensure that it is either a calculated risk or mitigated elsewhere.
System Configuration
Setup default error messages so that unexpected errors do not disclose sensitive information.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Choosing Message Identifier (opens in a new tab)
Exploiting Incorrectly Configured SSL/TLS (opens in a new tab)
WiFi MAC Address Tracking (opens in a new tab)
WiFi SSID Tracking (opens in a new tab)
Cellular Broadcast Message Request (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-200Exposure of Sensitive Information to an Unauthorized Actor (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #20OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product exposes sensitive information to an actor that is not explicitly authorized to have access to that information.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Separation of Privilege
Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Subverting Environment Variable Values (opens in a new tab)
ICMP Echo Request Ping (opens in a new tab)
TCP SYN Scan (opens in a new tab)
Enumerate Mail Exchange (MX) Records (opens in a new tab)
DNS Zone Transfers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-640Weak Password Recovery Mechanism for Forgotten Password (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product contains a mechanism for users to recover or change their passwords without knowing the original password, but the mechanism is weak.
Architecture and Design
Make sure that all input supplied by the user to the password recovery mechanism is thoroughly filtered and validated.
Architecture and Design
Do not use standard weak security questions and use several security questions.
Architecture and Design
Make sure that there is throttling on the number of incorrect answers to a security question. Disable the password recovery functionality after a certain (small) number of incorrect guesses.
OWASP Cheat Sheets
Choosing and Using Security Questions (opens in a new tab)
Forgot Password (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V2.5.3 (opens in a new tab)
V2.5.2 (opens in a new tab)
V2.5.1 (opens in a new tab)
Attack patterns
Password Recovery Exploitation (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-290Authentication Bypass by Spoofing (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
This attack-focused weakness is caused by incorrectly implemented authentication schemes that are subject to spoofing attacks.
OWASP Cheat Sheets
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V3.5.1 (opens in a new tab)
V2.8.5 (opens in a new tab)
V2.8.4 (opens in a new tab)
Attack patterns
Creating a Rogue Certification Authority Certificate (opens in a new tab)
Web Services API Signature Forgery Leveraging Hash Function Extension Weakness (opens in a new tab)
Signature Spoof (opens in a new tab)
Signature Spoofing by Misrepresentation (opens in a new tab)
Session Credential Falsification through Prediction (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-863Incorrect Authorization (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #17OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product performs an authorization check when an actor attempts to access a resource or perform an action, but it does not correctly perform the check.
Architecture and Design
Divide the product into anonymous, normal, privileged, and administrative areas. Reduce the attack surface by carefully mapping roles with data and functionality. Use role-based access control (RBAC) to enforce the roles at the appropriate boundaries.
Architecture and Design
Ensure that access control checks are performed related to the business logic. These checks may be different than the access control checks that are applied to more generic resources such as files, connections, processes, memory, and database records.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.8 (opens in a new tab)
V13.4.2 (opens in a new tab)
V7.2.2 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-833Deadlock (opens in a new tab)
Base weakness
The product contains multiple threads or executable segments that are waiting for each other to release a necessary lock, resulting in deadlock.
Attack patterns
Forced Deadlock (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-93Improper Neutralization of CRLF Sequences ('CRLF Injection') (opens in a new tab)
Base weaknessOWASP Top 10 A05:2025: Injection (opens in a new tab)
The product uses CRLF (carriage return line feeds) as a special element, e.g. to separate lines or records, but it does not neutralize or incorrectly neutralizes CRLF sequences from inputs.
Implementation
Avoid using CRLF as a special sequence.
Implementation
Appropriately filter or quote CRLF sequences in user-controlled input.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.1 (opens in a new tab)
Attack patterns
Command Delimiters (opens in a new tab)
Web Server Logs Tampering (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-444Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product acts as an intermediary HTTP agent (such as a proxy or firewall) in the data flow between two entities such as a client and server, but it does not interpret malformed HTTP requests or responses in ways that are consistent with how the messages will be processed by those entities that are at the ultimate destination.
Implementation
Use a web server that employs a strict HTTP parsing procedure, such as Apache.
Implementation
Use only SSL communication.
Implementation
Terminate the client session after each request.
OWASP Cheat Sheets
REST Assessment (opens in a new tab)
REST Security (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V13.2.5 (opens in a new tab)
Attack patterns
HTTP Response Smuggling (opens in a new tab)
HTTP Request Smuggling (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-59Improper Link Resolution Before File Access ('Link Following') (opens in a new tab)
Base weaknessLikelihood of exploit: MediumOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product attempts to access a file based on the filename, but it does not properly prevent that filename from identifying a link or shortcut that resolves to an unintended resource.
Architecture and Design · Separation of Privilege
Follow the principle of least privilege when assigning access rights to entities in a software system.
OWASP Cheat Sheets
Authorization (opens in a new tab)
Attack patterns
Symlink Attack (opens in a new tab)
Using Malicious Files (opens in a new tab)
Leverage Executable Code in Non-Executable Files (opens in a new tab)
Manipulating Web Input to File System Calls (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-79Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #1OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is used as a web page that is served to other users.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation · Architecture and Design
Understand the context in which your data will be used and the encoding that will be expected. This is especially important when transmitting data between different components, or when generating outputs that can contain multiple encodings at the same time, such as web pages or multi-part mail messages.
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide…
OWASP Cheat Sheets
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Injection Prevention (opens in a new tab)
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
OWASP ASVS 4.0.3
V5.3.3 (opens in a new tab)
V1.5.1 (opens in a new tab)
Attack patterns
XSS Using MIME Type Mismatch (opens in a new tab)
DOM-Based XSS (opens in a new tab)
Reflected XSS (opens in a new tab)
Stored XSS (opens in a new tab)
Cross-Site Scripting (XSS) (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-125Out-of-bounds Read (opens in a new tab)
Base weaknessCWE Top 25 (2025): #8
The product reads data past the end, or before the beginning, of the intended buffer.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Architecture and Design · Language Selection
Use a language that provides appropriate memory abstractions.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Overread Buffers (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-427Uncontrolled Search Path Element (opens in a new tab)
Base weaknessOWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product uses a fixed or controlled search path to find resources, but one or more locations in that path can be under the control of unintended actors.
Architecture and Design · Implementation · Attack Surface Reduction
Hard-code the search path to a set of known-safe values (such as system directories), or only allow them to be specified by the administrator in a configuration file. Do not allow these settings to be modified by an external party. Be careful to avoid related weaknesses such as CWE-426 and CWE-428.
Implementation · Attack Surface Reduction
When invoking other programs, specify those programs using fully-qualified pathnames. While this is an effective approach, code that uses fully-qualified pathnames might not be portable to other systems that do not use the same pathnames.
Implementation · Attack Surface Reduction
Remove or restrict all environment settings before invoking other programs. This includes the PATH environment variable, LD_LIBRARY_PATH, and other settings that identify the location of code libraries, and any application-specific search paths.
OWASP Cheat Sheets
Software Supply Chain Security (opens in a new tab)
Infrastructure as Code (opens in a new tab)
Attack patterns
Leveraging/Manipulating Configuration File Search Paths (opens in a new tab)
Search Order Hijacking (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:88424
Vendor Severity: critical
CVE Count: 22
Additional Cves: CVE-2026-58649, CVE-2026-66822, CVE-2026-69651, CVE-2026-69806, CVE-2026-70159, CVE-2026-70175, CVE-2026-70179, CVE-2026-70181, CVE-2026-70183, CVE-2026-70186, CVE-2026-70188, CVE-2026-70196, CVE-2026-88092, CVE-2026-92707, CVE-2026-96225, CVE-2026-96230, CVE-2026-96231, CVE-2026-96233, CVE-2026-96236, CVE-2026-96237, CVE-2026-96238

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-776, CWE-346, CWE-201 +12

Technical details

References

Community reviews

Related threats