CVE-2026-15075VulnerabilityPublished 30 Jul 2026Updated 29 Oct 2026

Red Hat Security Advisory: Red Hat Build of Apache Camel 4.18.3 for Quarkus 3.33 update is now available (RHBQ

Affects Red HatSource GCVE Database

Compare

Mentioned vulnerabilities

Authoritative record:CVE-2026-15075· High 8.2

Not known to be exploited · CVSS 8.2 High.

Data as of 29 Oct 2026, 22:46 UTC

CVSS 4.0 base score

8.2High

How severe the flaw is on the 0–10 CVSS scale.

CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:H/VI:N/VA:N/SC:N/SI:N/SA:N

Attack Vector: Network
Attack Complexity: Low
Attack Requirements: Present
Privileges Required: None
User Interaction: None
Vulnerable system confidentiality: High
Vulnerable system integrity: None
Vulnerable system availability: None
Subsequent system confidentiality: None
Subsequent system integrity: None
Subsequent system availability: None

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable system is bound to the network stack and the set of possible attackers extends beyond the other options listed below, up to and including the entire Internet. Such a vulnerability is often termed “remotely exploitable” and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: The attacker must take no measurable action to exploit the vulnerability. The attack requires no target-specific circumvention to exploit the vulnerability. An attacker can expect repeatable success against the vulnerable system.
Attack Requirements: Present: The successful attack depends on the presence of specific deployment and execution conditions of the vulnerable system that enable the attack. These include: a race condition must be won to successfully exploit the vulnerability (the successfulness of the attack is conditioned on execution conditions that are not under full control of the attacker, or the attack may need to be launched multiple times against a single target before being successful); the attacker must inject themselves into the logical network path between the target and the resource requested by the victim (e.g. vulnerabilities requiring an on-path attacker).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without interaction from any human user, other than the attacker.
Vulnerable system confidentiality: High: There is a total loss of confidentiality, resulting in all information within the Vulnerable System being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact. For example, an attacker steals the administrator's password, or private encryption keys of a web server.
Vulnerable system integrity: None: There is no loss of integrity within the Vulnerable System.
Vulnerable system availability: None: There is no impact to availability within the Vulnerable System.
Subsequent system confidentiality: None: There is no loss of confidentiality within the Subsequent System or all confidentiality impact is constrained to the Vulnerable System.
Subsequent system integrity: None: There is no loss of integrity within the Subsequent System or all integrity impact is constrained to the Vulnerable System.
Subsequent system availability: None: There is no impact to availability within the Subsequent System or all availability impact is constrained to the Vulnerable System.

Definitions: FIRST CVSS v4.0 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 14 Jul 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 29 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Eclipse FoundationEclipse Vert.x	Affected >=4.0.0 <=4.5.29 >=5.0.0 <=5.1.4	Fixed in–
GitHubEclipse Vert.x`pkg:github/Eclipse Vert.x`Other threats	Affected >=4.0.0 <=4.5.29 >=5.0.0 <=5.1.4	Fixed in–

Check your own hosts for these packages with threat-finder (opens in a new tab), our free open-source scanner.

Description

An update for Red Hat Build of Apache Camel 4.18.3 for Quarkus 3.33 update is now available (RHBQ 3.33.2.SP3). The purpose of this text-only errata is to inform you about the enhancements that improve your developer experience and ensure the security and stability of your products: * netty-codec-http: Netty: Memory exhaustion in netty-codec-http (decompression bomb) [rhboac-camel-quarkus-3] (CVE-2026-59899) * netty-codec-http2: Netty: Denial of Service via HTTP/2 DATA frame memory leak [rhboac-camel-quarkus-3] (CVE-2026-56819) * netty-codec-http: Netty: Security control bypass allows unauthorized requests via null origin header [rhboac-camel-quarkus-3] (CVE-2026-56746) * netty-codec-http: Netty: Denial of Service via memory exhaustion in SPDY-to-HTTP codec [rhboac-camel-quarkus-3] (CVE-2026-56745) * netty-codec-haproxy: Netty codec-haproxy: Denial of Service via crafted PROXY protocol v2 message [rhboac-camel-quarkus-3] (CVE-2026-55851) * netty-codec-http: Netty: Denial of Service via SPDY SETTINGS frame processing [rhboac-camel-quarkus-3] (CVE-2026-55831) * vertx-web-client: Eclipse Vert.x Web Client: Information disclosure via improper cookie domain validation [rhboac-camel-quarkus-3] (CVE-2026-15076) * smallrye-mutiny-vertx-core: Eclipse Vert.x: Information disclosure via improper handling of HTTP 30x redirects [rhboac-camel-quarkus-3] (CVE-2026-15075) * vertx-core: Eclipse Vert.x: Information disclosure via improper handling of HTTP 30x redirects [rhboac-camel-quarkus-3] (CVE-2026-15075) * httpcore5-h2: Apache HttpComponents Core: Denial of Service via oversized HTTP/2 HPACK header blocks [rhboac-camel-quarkus-3] (CVE-2026-54428) * camel-vertx-http: Apache Camel (camel-vertx-http): Remote Code Execution via Deserialization of Untrusted Data [rhboac-camel-quarkus-3] (CVE-2026-40859) * camel-mail: Apache Camel Mail Component: Credential exposure and information disclosure via improper input validation of mail headers [rhboac-camel-quarkus-3] (CVE-2026-46584) * camel-cxf-common: Apache Camel CXF SOAP: Remote attacker can execute unintended operations via header manipulation [rhboac-camel-quarkus-3] (CVE-2026-46592) * camel-vertx-websocket: Apache Camel Vertx Websocket: Server-Side Request Forgery and sensitive data exposure [rhboac-camel-quarkus-3] (CVE-2026-46726) * httpcore: Apache HttpComponents Core: Denial of Service via excessive HTTP headers [rhboac-camel-quarkus-3] (CVE-2026-54399)

CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-770Allocation of Resources Without Limits or Throttling (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #25
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
Requirements
Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
Architecture and Design
Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
Architecture and Design
Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
OWASP ASVS 4.0.3
V8.1.4 (opens in a new tab)
V13.4.1 (opens in a new tab)
V11.1.4 (opens in a new tab)
Attack patterns
XML Ping of the Death (opens in a new tab)
Exponential Data Expansion (opens in a new tab)
Serialized Data Parameter Blowup (opens in a new tab)
Serialized Data with Nested Payloads (opens in a new tab)
Oversized Serialized Data Payloads (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-502Deserialization of Untrusted Data (opens in a new tab)
Base weaknessLikelihood of exploit: MediumCWE Top 25 (2025): #15OWASP Top 10 A08:2025: Software or Data Integrity Failures (opens in a new tab)
The product deserializes untrusted data without sufficiently ensuring that the resulting data will be valid.
Architecture and Design · Implementation
If available, use the signing/sealing features of the programming language to assure that deserialized data has not been tainted. For example, a hash-based message authentication code (HMAC) could be used to ensure that data has not been modified.
Implementation
When deserializing data, populate a new object rather than just deserializing. The result is that the data flows through safe input validation and that the functions are safe.
Implementation
Explicitly define a final object() to prevent deserialization.
OWASP Cheat Sheets
Abuse Case (opens in a new tab)
Deserialization (opens in a new tab)
XML Security (opens in a new tab)
XML External Entity Prevention (opens in a new tab)
Software Supply Chain Security (opens in a new tab)
OWASP ASVS 4.0.3
V1.5.2 (opens in a new tab)
V5.5.3 (opens in a new tab)
V5.5.1 (opens in a new tab)
Attack patterns
Object Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-918Server-Side Request Forgery (opens in a new tab)
Base weaknessCWE Top 25 (2025): #22OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The web server receives a URL or similar request from an upstream component and retrieves the contents of this URL, but it does not sufficiently ensure that the request is being sent to the expected destination.
Implementation · Operation
If there is a known list of applications, IP, hostname, and/or domains to which the product is allowed to communicate, then use allowlists to ensure that outgoing requests are restricted to these known entities. The allowlists could be in the application code or possibly enforced by firewalls or network segmentation.
Implementation · Operation
If the product is expected to be able to connect to arbitrary IP addresses or domains, consider using a denylist that includes private network addresses, internal domain names, etc. The denylist could be in the application code or possibly enforced by firewalls or network segmentation.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
OWASP Cheat Sheets
Server Side Request Forgery Prevention (opens in a new tab)
Unvalidated Redirects and Forwards (opens in a new tab)
Cross Site Scripting Prevention (opens in a new tab)
DOM based XSS Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V12.6.1 (opens in a new tab)
V5.2.6 (opens in a new tab)
Attack patterns
Server Side Request Forgery (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-639Authorization Bypass Through User-Controlled Key (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #24OWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The system's authorization functionality does not prevent one user from gaining access to another user's data or record by modifying the key value identifying the data.
Architecture and Design
For each and every data access, ensure that the user has sufficient privilege to access the record that is being requested.
Architecture and Design · Implementation
Make sure that the key that is used in the lookup of a specific user's record is not controllable externally by the user or that any tampering can be detected.
Architecture and Design
Use encryption in order to make it more difficult to guess other legitimate values of the key or associate a digital signature with the key so that the server can verify that there has been no tampering.
OWASP Cheat Sheets
Access Control (opens in a new tab)
Authorization Testing Automation (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
Insecure Direct Object Reference Prevention (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V4.1.2 (opens in a new tab)
V4.2.1 (opens in a new tab)
V8.3.8 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-772Missing Release of Resource after Effective Lifetime (opens in a new tab)
Base weaknessLikelihood of exploit: High
The product does not release a resource after its effective lifetime has ended, i.e., after the resource is no longer needed.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Implementation
It is good practice to be responsible for freeing all resources you allocate and to be consistent with how and where you free resources in a function. If you allocate resources that you intend to free upon completion of the function, you must be sure to free the resources at all exit points for that function including…
Operation · Architecture and Design · Resource Limitation
Use resource-limiting settings provided by the operating system or environment. For example, when managing system resources in POSIX, setrlimit() can be used to set limits for certain types of resources, and getrlimit() can determine how many resources are available.
Attack patterns
HTTP DoS (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-807Reliance on Untrusted Inputs in a Security Decision (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product uses a protection mechanism that relies on the existence or values of an input, but the input can be modified by an untrusted actor in a way that bypasses the protection mechanism.
Architecture and Design · Attack Surface Reduction
Store state information and sensitive data on the server side only.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-911Improper Update of Reference Count (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product uses a reference count to manage a resource, but it does not update or incorrectly updates the reference count.
CWE-409Improper Handling of Highly Compressed Data (Data Amplification) (opens in a new tab)
Base weakness
The product does not handle or incorrectly handles a compressed input with a very high compression ratio that produces a large output.
OWASP Cheat Sheets
File Upload (opens in a new tab)
OWASP ASVS 4.0.3
V12.1.2 (opens in a new tab)
V12.1.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

WeaknessesCWE-346, CWE-770, CWE-502 +6

Technical details

References

Community reviews

Related threats