CVE-2026-74934VulnerabilityPublished 9 Sep 2026Updated 2 Nov 2026

Red Hat Security Advisory: thunderbird security update

Affects Red Hat thunderbirdSource GCVE Database

Compare

Authoritative record:CVE-2026-74934· High 7.5

Not known to be exploited · CVSS 7.5 High.

Data as of 2 Nov 2026, 23:30 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H

Attack Vector: Network
Attack Complexity: High
Privileges Required: None
User Interaction: Required
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: High: A successful attack depends on conditions beyond the attacker's control. That is, a successful attack cannot be accomplished at will, but requires the attacker to invest in some measurable amount of effort in preparation or execution against the vulnerable component before a successful attack can be expected. For example, a successful attack may require an attacker to: gather knowledge about the environment in which the vulnerable target/component exists; prepare the target environment to improve exploit reliability; or inject themselves into the logical network path between the target and the resource requested by the victim in order to read and/or modify network communications (e.g., a man in the middle attack).
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: Required: Successful exploitation of this vulnerability requires a user to take some action before the vulnerability can be exploited.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: High: There is total loss of confidentiality, resulting in all resources within the impacted component being divulged to the attacker. Alternatively, access to only some restricted information is obtained, but the disclosed information presents a direct, serious impact.
Integrity: High: There is a total loss of integrity, or a complete loss of protection. For example, the attacker is able to modify any/all files protected by the impacted component. Alternatively, only some files can be modified, but malicious modification would present a direct, serious consequence to the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 18 Aug 2026
Detectable: no evidence on record.
No public nuclei template indexed
Weaponized: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 2 Nov 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponized: A Metasploit exploit module or Exploit-DB entry exists (Metasploit scanner modules do not count), or CISA SSVC or the CVSS exploit maturity reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Red Hat Product Security Red Hat	Affected <154 <115.39 <140.14 <153.1	Fixed in 154 115.39 140.14 153.1

AI-suggested

Red Hat has released security updates for Thunderbird in Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support and Extended Update Support Long-Life Add-On. Users should apply these official updates promptly to remediate the vulnerabilities. For detailed update instructions, refer to the Red Hat advisory at https://access.redhat.com/articles/11258. No additional mitigation steps are indicated beyond applying the vendor-provided patches.

Description

Multiple security vulnerabilities have been identified and addressed in Mozilla Thunderbird as part of a Red Hat security advisory. These include issues such as privilege escalation, information disclosure, use-after-free, race conditions, site isolation problems, mitigation bypasses, same-origin policy bypasses, integer overflow, and JIT miscompilation affecting various components like Graphics, Networking, DOM, JavaScript Engine, and others. The advisory covers fixes applied in Firefox ESR and Thunderbird versions. The update is rated as having an important security impact by Red Hat.

Impact

The vulnerabilities collectively could allow attackers to escalate privileges, disclose sensitive information, bypass security mitigations, and potentially execute arbitrary code or compromise the integrity of the Thunderbird client. The presence of use-after-free and race conditions increases the risk of memory corruption. Same-origin policy bypasses and site isolation issues could lead to unauthorized access to web content or data. Overall, these issues pose a high security risk to users of affected Thunderbird versions.

CWE-653Improper Isolation or Compartmentalization (opens in a new tab)
Class weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product does not properly compartmentalize or isolate functionality, processes, or resources that require different privilege levels, rights, or permissions.
Architecture and Design
Break up privileges between different modules, objects, or entities. Minimize the interfaces between modules and require strong access control between them.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-266Incorrect Privilege Assignment (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
A product incorrectly assigns a privilege to a particular actor, creating an unintended sphere of control for that actor.
Architecture and Design · Operation
Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
Architecture and Design · Operation · Environment Hardening
Run your code using the lowest privileges that are required to accomplish the necessary tasks. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment.
OWASP Cheat Sheets
Docker Security (opens in a new tab)
Third Party Javascript Management (opens in a new tab)
Virtual Patching (opens in a new tab)
Secure Design Principles (opens in a new tab)
OWASP ASVS 4.0.3
V1.4.4 (opens in a new tab)
V1.4.5 (opens in a new tab)
V1.10.1 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-825Expired Pointer Dereference (opens in a new tab)
Base weakness
The product dereferences a pointer that contains a location for memory that was previously valid, but is no longer valid.
Architecture and Design
Choose a language that provides automatic memory management.
Implementation
When freeing pointers, be sure to set them to NULL once they are freed. However, the utilization of multiple or complex data structures may lower the usefulness of this strategy.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-201Insertion of Sensitive Information Into Sent Data (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The code transmits data to another actor, but a portion of the data includes sensitive information that should not be accessible to that actor.
Requirements
Specify which data in the software should be regarded as sensitive. Consider which types of users should have access to which types of data.
Implementation
Ensure that any possibly sensitive data specified in the requirements is verified with designers to ensure that it is either a calculated risk or mitigated elsewhere.
System Configuration
Setup default error messages so that unexpected errors do not disclose sensitive information.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Logging (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
V7.3.3 (opens in a new tab)
Attack patterns
Choosing Message Identifier (opens in a new tab)
Exploiting Incorrectly Configured SSL/TLS (opens in a new tab)
WiFi MAC Address Tracking (opens in a new tab)
WiFi SSID Tracking (opens in a new tab)
Cellular Broadcast Message Request (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-787Out-of-bounds Write (opens in a new tab)
Base weaknessLikelihood of exploit: HighCWE Top 25 (2025): #5
The product writes data past the end, or before the beginning, of the intended buffer.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Operation · Build and Compilation · Environment Hardening
Use automatic buffer overflow detection mechanisms that are offered by certain compilers or compiler extensions. Examples include: the Microsoft Visual Studio /GS flag, Fedora/Red Hat FORTIFY_SOURCE GCC flag, StackGuard, and ProPolice, which provide various mechanisms including canary-based detection and range/index…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-497Exposure of Sensitive System Information to an Unauthorized Control Sphere (opens in a new tab)
Base weaknessOWASP Top 10 A01:2025: Broken Access Control (opens in a new tab)
The product does not properly prevent sensitive system-level information from being accessed by unauthorized actors who do not have the same level of access to the underlying system as the product does.
Architecture and Design · Implementation
Production applications should never use methods that generate internal details such as stack traces and error messages unless that information is directly committed to a log that is not viewable by the end user.
OWASP Cheat Sheets
Error Handling (opens in a new tab)
Authorization (opens in a new tab)
OWASP ASVS 4.0.3
V14.3.2 (opens in a new tab)
V8.3.4 (opens in a new tab)
V14.3.3 (opens in a new tab)
Attack patterns
Web Application Fingerprinting (opens in a new tab)
System Location Discovery (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-472External Control of Assumed-Immutable Web Parameter (opens in a new tab)
Base weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The web application does not sufficiently verify inputs that are assumed to be immutable but are actually externally controllable, such as hidden form fields.
Implementation · Input Validation
Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does.
Implementation · Input Validation
Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174).
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
Attack patterns
XML Schema Poisoning (opens in a new tab)
Session Credential Falsification through Manipulation (opens in a new tab)
Accessing/Intercepting/Modifying HTTP Cookies (opens in a new tab)
Manipulating Opaque Client-based Data Tokens (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-807Reliance on Untrusted Inputs in a Security Decision (opens in a new tab)
Base weaknessLikelihood of exploit: HighOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product uses a protection mechanism that relies on the existence or values of an input, but the input can be modified by an untrusted actor in a way that bypasses the protection mechanism.
Architecture and Design · Attack Surface Reduction
Store state information and sensitive data on the server side only.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design
For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks…
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-501Trust Boundary Violation (opens in a new tab)
Class weaknessOWASP Top 10 A06:2025: Insecure Design (opens in a new tab)
The product mixes trusted and untrusted data in the same data structure or structured message.
OWASP Cheat Sheets
Secure Design Principles (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-1100Insufficient Isolation of System-Dependent Functions (opens in a new tab)
Base weakness
The product or code does not isolate system-dependent functionality into separate standalone modules.
CWE-346Origin Validation Error (opens in a new tab)
Class weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product does not properly verify that the source of data or communication is valid.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
V1.4.4 (opens in a new tab)
Attack patterns
JSON Hijacking (aka JavaScript Hijacking) (opens in a new tab)
Cache Poisoning (opens in a new tab)
DNS Cache Poisoning (opens in a new tab)
Exploit Script-Based APIs (opens in a new tab)
Application API Message Manipulation via Man-in-the-Middle (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-190Integer Overflow or Wraparound (opens in a new tab)
Base weaknessLikelihood of exploit: Medium
The product performs a calculation that can produce an integer overflow or wraparound when the logic assumes that the resulting value will always be larger than the original value. This occurs when an integer value is incremented to a value that is too large to store in the associated representation. When this occurs, the value may become a very small or negative number.
Requirements
Ensure that all protocols are strictly defined, such that all out-of-bounds behavior can be identified simply, and require strict conformance to the protocol.
Requirements · Language Selection
Use a language that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
Architecture and Design · Libraries or Frameworks
Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid.
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
OWASP ASVS 4.0.3
V5.4.3 (opens in a new tab)
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
Attack patterns
Forced Integer Overflow (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-940Improper Verification of Source of a Communication Channel (opens in a new tab)
Base weaknessOWASP Top 10 A07:2025: Authentication Failures (opens in a new tab)
The product establishes a communication channel to handle an incoming request that has been initiated by an actor, but it does not properly verify that the request is coming from the expected origin.
Architecture and Design
Use a mechanism that can validate the identity of the source, such as a certificate, and validate the integrity of data to ensure that it cannot be modified in transit using an Adversary-in-the-Middle (AITM) attack.
OWASP Cheat Sheets
OWASP Authentication (opens in a new tab)
OWASP ASVS 4.0.3
V1.14.1 (opens in a new tab)
V14.5.2 (opens in a new tab)
V14.5.3 (opens in a new tab)
Attack patterns
WebView Injection (opens in a new tab)
Connection Reset (opens in a new tab)
TCP RST Injection (opens in a new tab)
Traffic Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-360Trust of System Event Data (opens in a new tab)
Base weaknessLikelihood of exploit: High
Security based on event locations are insecure and can be spoofed.
Architecture and Design
Never trust or rely on any of the information in an Event for security.
OWASP Cheat Sheets
XML Security (opens in a new tab)
REST Security (opens in a new tab)
JSON Web Token for Java (opens in a new tab)
REST Assessment (opens in a new tab)
Cross-Site Request Forgery Prevention (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.2 (opens in a new tab)
V3.5.3 (opens in a new tab)
V13.2.6 (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).
CWE-733Compiler Optimization Removal or Modification of Security-critical Code (opens in a new tab)
Base weakness
The developer builds a security-critical protection mechanism into the software, but the compiler optimizes the program such that the mechanism is removed or modified.
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Filter Failure through Buffer Overflow (opens in a new tab)
Overflow Variables and Tags (opens in a new tab)
Buffer Overflow in an API Call (opens in a new tab)
Buffer Overflow in Local Command-Line Utilities (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

GCVE source: db.gcve.eu
Csaf Category: csaf_security_advisory
Csaf Version: 2.0
Publisher: Red Hat Product Security
Advisory ID: RHSA-2026:65757
Vendor Severity: high
CVE Count: 25
Additional Cves: CVE-2026-74935, CVE-2026-74939, CVE-2026-74940, CVE-2026-74941, CVE-2026-74942, CVE-2026-74945, CVE-2026-74946, CVE-2026-74948, CVE-2026-74953, CVE-2026-74957, CVE-2026-74959, CVE-2026-74960, CVE-2026-74962, CVE-2026-74963, CVE-2026-74964, CVE-2026-74965, CVE-2026-74967, CVE-2026-74971, CVE-2026-74972, CVE-2026-74973, CVE-2026-74974, CVE-2026-74976, CVE-2026-74987, CVE-2026-74990

References

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 2 Nov 2026, 23:30 UTC

WeaknessesCWE-653, CWE-266, CWE-825 +12

Technical details

References

Community reviews

Related threats