Threat database

In the Linux kernel, the following vulnerability has been resolved: tpm: fix off-by-four bounds check in tpm2_get_random() When the response carries the TPM2_ST_SESSIONS tag, tpm2_get_random() skips the 4-byte parameter size field before locating the random data, but the bounds check still validates the response length against TPM_HEADER_SIZE. A truncated response can pass the check and make memcpy() read up to 4 bytes past the response end, so stale buffer contents end up in the caller's random bytes. Fix this by checking the response length against 'offset', which already includes the skipped parameter size field.

In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known The namespace head is marked zoned at allocation time based only on the command set identifier. If the zone info query reports a zero zone size, the path namespace is registered without zoned limits while the head still advertises the zoned capability with a zone size of zero, and reporting zones or writing to the head then shifts by ilog2(0). Drop the zoned feature from the head allocation and let the head limits refresh stack it in from the path namespace instead.

In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: reject too-short SGL segments The host controls an SGL segment's length. A nonzero length smaller than one SGL descriptor makes nr_descs zero, so nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside the allocated buffer. If that byte contains a segment descriptor type, the function also copies the preceding 16 bytes and returns a negative descriptor count. The read was reproduced in 3/3 KASAN boots with only the host transfer mocked by a KUnit test: BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment Read of size 1 by task kunit_try_catch Call Trace: nvmet_pci_epf_get_sgl_segment nvmet_pci_epf_short_sgl_test Kernel panic - not syncing: KASAN: panic_on_warn set ... Reject segments that cannot hold one descriptor before allocating or transferring their contents.

In the Linux kernel, the following vulnerability has been resolved: nvmet: copy the hostid into the ctrl before creating PR pc_refs Commit 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation") added a second uuid_copy() of args->hostid near the end of nvmet_alloc_ctrl(), and commit 7b658153f1b8 ("nvmet: Remove duplicate uuid_copy") removed the original copy that sat before nvmet_ctrl_init_pr() instead of the new one. Since then nvmet_ctrl_init_pr() snapshots ctrl->hostid into the per-controller per-namespace reservation refs while the uuid_copy() from the connect data runs later, after the controller is published. The ctrl is allocated with kzalloc(), so every pc_ref created on this path stores the nil UUID. pc_ref->hostid has a single consumer: nvmet_pr_set_ctrl_to_abort() matches it against the preempted registrant's hostid to kill and drain the victim's in-flight I/O for Preempt and Abort. The match can never hit with the nil UUID, so whenever a namespace with reservations enabled exists before a host connects, which includes every reconnect, Preempt and Abort silently degrades into a plain Preempt: the preempting host sees success while the victim's in-flight I/O is still in the air. Copy the hostid where the rest of the connect data is consumed, before the controller is published and before nvmet_ctrl_init_pr() takes its snapshot.

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the runtime eVMCS controls (pin, primary, secondary, etc.) are being updated. If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and then runs the same L2 with TPR virtualization disabled, KVM will fail to refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or L1 by proxy) read and write L0's TPR.

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when freeing the mask, particularly in the error path of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active to track whether or not the mask has been freed. As pointed out by Sashiko, blindly freeing the mask in sev_vm_destroy() results in a double-free if the mask is freed if __sev_guest_init() fails. Throw the logic in a helper as nullifying the pointer is frustratingly difficult and weird due to have_run_cpus being a single-entry array when CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not directly assignable when the cpumask is on-stack, e.g. requires using a local variable and a memcpy(), which is beyond ridiculous. Furthermore, while clearing the on-stack bitmask is an unnecessary and arguably unwanted side effect, KVM absolutely relies on '0' being the "null" value given that the struct is zero-allocated. Opportunistically add an alloc() helper to pair with free(); there are just enough call sites to make doing so worthwhile.

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM *before* clearing SEV state Explicitly flush caches after intra-host migration before clearing "SEV active" on the source VM, as doing cache maintenance afterwards creates a tiny window where memory reclaim could return memory to the host without performing a cache flush, e.g. as pointed out by Sashiko: CPU1 in sev_migrate_from(): src->active = false; CPU2 running concurrent unmap: Since active is false, the automatic cache flush in sev_guest_memory_reclaimed is skipped. The host frees and reallocates the page. CPU1 in sev_migrate_from(): sev_writeback_caches(src_kvm); Executes a hardware cache flush (wbnoinvd), which writes the guest's old dirty ciphertext over the new page owner's data.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush. Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid(). Deliberately don't bother saving/restoring the "old" tlb_ctl on failure, in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next successful run of the VMCB *may* unnecessarily flush all ASIDs, which strictly speaking could result in noisy neighbor issues. However, the fact that new_asid() is already guest-triggerable, because of KVM's flawed behavior of clearing the ASID on emulated INIT, means that a guest can already trigger a flush of all ASIDs at roughly the same rate. And once KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID to each vCPU, this flaw goes away.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Apply the fine-grained UNDEFs without FEAT_FGT FGUs don't actually require hardware support, so don't gate fgt trap config insertion on FGT. This is the only action required to allow FGUs always, as kvm_calculate_traps() already computes the FGU bits with or without FEAT_FGT. This also fixes a spurious WARN when a TLBI OS is run on a guest in vEL1 without FEAT_TLBIOS on non FEAT_FGT hardware. In this configuration the course-grained HCR_EL2.TTLBOS trap reaches the handler handle_tlbi_el1(), which expects an EL1 TLBI only from vEL2. With FGUs enabled the UNDEF will be injected without needing the specific handler. [oliver: Take Wei-Lin's suggested changelog]

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq Referencing the last interrupt inserted in an LR is rather fragile, as this interrupt can vanish if a concurrently unmapped LPI. Solve this by bumping up the refcount on the interrupt when populating last_lr_irq, and drop it at vgic_prune_ap_list() time, when LPIs are being reclaimed.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Hold a router reference for each allocated HopID tb_stop() drops the reference to all DP tunnels but does not deactivate them, thus nothing cancels a dprx_work still in flight (which holds its own tunnel reference) and the tunnel can outlive tb_switch_remove(). The HopID releases in tb_path_free() then operate on freed IDAs and trigger warnings like ida_free called for id=8 which is not allocated. This can be triggered by unbinding the driver while a DP tunnel is still waiting for the DPRX capabilities read to finish. On the Apple NHI unplugging the cable runs into just that reliably because the read can never finish right now and because the unplug powers down the entire USB4 complex and removes the NHI device. Take a router reference whenever an input or output HopID is allocated and drop it again after the HopID is released. This keeps the ports and their HopID IDAs alive for as long as they are used. The KUnit tests allocate routers without ever registering their devices so initialize the embedded struct device there as well and drop its initial reference when the test is finished.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Make the DP tunnel activation callback mandatory tb_tunnel_alloc_dp() takes an optional callback which is run from dprx_work once the DPRX capabilities read has completed. Without that callback tb_dp_dprx_start() reads the capabilities synchronously and never queues the work. It however always takes a tunnel reference which is only dropped by dprx_work itself or by tb_dp_dprx_stop() when cancel_delayed_work() actually canceled that work. That reference is thus leaked for every tunnel without a callback. The only tunnels without one are those from tb_tunnel_discover_dp(), which are activated again when restoring from hibernation. Pass the callback to tb_tunnel_discover_dp() as well and drop the synchronous path such that the DPRX capabilities are always read from dprx_work. Hibernation restore then also no longer blocks for up to 12 seconds while waiting for that read to complete. Also fix up the KUnit tests.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Tear down inactive DP tunnels when the domain is stopped tb_stop() only tears down DMA tunnels so a DP tunnel that is still waiting for dprx_work to complete keeps that work queued while the routers are removed and the control channel is stopped. The work only stops once the DPRX timeout has passed and because it requeues itself until then the flush_workqueue() in tb_domain_remove() won't wait for its final run. The callback then runs against a domain that is already torn down. A reference to that domain is kept so the completion waiting for that domain to disappear in unbind will block until the timeout is eventually reached. Tear down DP tunnels that are not active yet as well which also cancels that work. Tunnels for displays that are already alive are untouched and keep working.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix domain reference leak when DPRX read is canceled tb_tunnel_one_dp() takes a domain reference which is only dropped once tb_dp_tunnel_active() has run on the work queue. If that work is cancelled that reference is leaked. Since commit f5cc545f5969 ("thunderbolt: Wait for tb_domain_release() to complete when driver is removed") instead of just leaking memory this now also blocks in the completion wait forever when unbinding the driver. This can be triggered whenever a DP tunnel is torn down before the DPRX read has completed, e.g. by unplugging within the timeout, and then unbinding the driver. That reference only exists to keep the domain around while the DPRX work is scheduled so let the work itself own it: take it in tb_dp_dprx_start() and drop it in both places that end the work. Get/put are then paired inside the same file and it doesn't matter anymore if the callback ever runs.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Don't access a DP tunnel after its DPRX read was canceled tb_dp_dprx_work() checks ->dprx_canceled before it takes tb->lock so it misses a tb_dp_dprx_stop() that could not cancel the already running work. It then polls the DPRX capabilities and runs the callback for a tunnel that has already been torn down while the domain is suspending or going away. This can be hit by cancelling the DPRX read from outside the ordered tb->wq: During suspend tb_disconnect_and_release_dp() does just this and with a later patch tb_stop() will do it as well. The latter in combination with the Apple NHI where the DPRX read never completed is how I hit this. Check the flag with tb->lock held instead and check it again in tb_dp_tunnel_active() because the callback runs after the lock has been dropped again. Also clear the flag in tb_dp_dprx_start() so that it only ever describes the work that is currently in flight.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL dereference in tb_remove_work() There is a slight race between tb_remove_work() and tb_domain_remove() which leads to dereferencing a NULL tb->root_switch pointer inside tb_free_unplugged_xdomains(): Thread A Thread B tb_remove_work() tb_domain_remove() mutex_lock(&tb->lock) tb_stop() /* doesn't cancel a running callback */ cancel_delayed_work(&tcm->remove_work) ... tb_switch_remove(tb->root_switch) tb->root_switch = NULL mutex_unlock(&tb->lock) mutex_lock(&tb->lock) ... /* without checking ->root_switch */ tb_free_unplugged_xdomains(tb->root_switch) mutex_unlock(&tb->lock) Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains() out of the &tb->lock section and the check for tb->root_switch, in particular. It states: For this reason separate removing the XDomain from the topology data structures (where we need the lock) from unregistering the device from the bus (where remove callbacks of the drivers are being called). tb_free_unplugged_xdomains() belongs to the former group of functions requiring the lock. And it also calls tb_xdomain_remove() which should only be called with &tb->lock held. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server.

In the Linux kernel, the following vulnerability has been resolved: smb: client: flush and commit data before querying allocated ranges The mode 0 / FALLOC_FL_KEEP_SIZE fallocate emulation for small interior ranges in smb3_simple_fallocate_range() issues FSCTL_QUERY_ALLOCATED_RANGES and zero-fills any sub-range the server reports as an unallocated hole, to force block allocation without changing file contents. This is unsafe against Windows servers. Per the Win32 documentation, FSCTL_QUERY_ALLOCATED_RANGES only reports ranges that *may* contain nonzero data and is explicitly not coherent with recently written data: "a call to FSCTL_QUERY_ALLOCATED_RANGES [after writing to a network file] would not necessarily return a correct list of allocated regions. To ensure coherency [...] flush the data to the file" fsx (generic/363) reproduces the resulting corruption against Windows Server 2022: a range is written, an uncached read returns the data, yet the next FSCTL_QUERY_ALLOCATED_RANGES on that range reports it as a whole hole, so the emulation overwrites live data with zeroes. A network trace confirmed the WRITE, the READ returning data and the query returning an empty range list within microseconds. Samba does not exhibit this; its query is coherent with the written data. Write back the dirty pages, drain any outstanding I/O and issue an SMB2 FLUSH to force the server to commit the data before querying the allocated ranges, so the query reflects the data actually present. With this, generic/363 passes against both Windows Server 2022 and Samba over 100000 fsx operations.

In the Linux kernel, the following vulnerability has been resolved: smb: client: flush dirty data before zeroing a range smb3_zero_range() emulates FALLOC_FL_ZERO_RANGE by invalidating the page cache over the target range with truncate_pagecache_range() and then issuing FSCTL_SET_ZERO_DATA to the server. Dirty data was only flushed conditionally, when the range reached or extended EOF. For a purely interior zero range that does not reach EOF, no flush happened, so a dirty folio overlapping the range could be written back to the server after the FSCTL and refill the range that was just zeroed with stale data. Fix this by unconditionally flushing and waiting for dirty data in the range before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA, exactly as was done for smb3_punch_hole() in commit d7d2adcd022b ("smb/client: flush dirty data before punching a hole"); the two paths are structurally identical here. This is observed as generic/363 randomly reading stale data where a zeroed range is expected against Windows Server.