Search: 1.20.70.50
441 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| High | 7.8 | EPSS 0.1% | CVE-2025-40284Linux kernel · Bluetooth: MGMT: cancel mesh send timer when hdev removed mesh_send_done timer is not High7.8EPSS 0.1%GCVE DatabaseCVE-2025-40284 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT timers. Should fix the BUG: sporadically seen by BlueZ test bot (in "Mesh - Send cancel - 1" test). Log: ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0 vhci_release+0x18b/0x240 ------ EPSS 0.1%Vulnerability | GCVE Database | ||
| Low | – | EPSS 0.2% | LowEPSS 0.2%GCVE DatabaseCVE-2025-40222 In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | – | EPSS 0.3% | MediumEPSS 0.3%GCVE DatabaseCVE-2025-40225 In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix kernel panic on partial unmap of a GPU VA region This commit address a kernel panic issue that can happen if Userspace tries to partially unmap a GPU virtual region (aka drm_gpuva). The VM_BIND interface allows partial unmapping of a BO. Panthor driver pre-allocates memory for the new drm_gpuva structures that would be needed for the map/unmap operation, done using drm_gpuvm layer. It expected that only one new drm_gpuva would be needed on umap but a partial unmap can require 2 new drm_gpuva and that's why it ended up doing a NULL pointer dereference causing a kernel panic. Following dump was seen when partial unmap was exercised. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078 Mem abort info: ESR = 0x0000000096000046 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000088a863000 [000000000000078] pgd=080000088a842003, p4d=080000088a842003, pud=0800000884bf5003, pmd=0000000000000000 Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP <snip> pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor] lr : panthor_gpuva_sm_step_remap+0x6c/0x330 [panthor] sp : ffff800085d43970 x29: ffff800085d43970 x28: ffff00080363e440 x27: ffff0008090c6000 x26: 0000000000000030 x25: ffff800085d439f8 x24: ffff00080d402000 x23: ffff800085d43b60 x22: ffff800085d439e0 x21: ffff00080abdb180 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000010 x17: 6e656c202c303030 x16: 3666666666646466 x15: 393d61766f69202c x14: 312d3d7361203a70 x13: 303030323d6e656c x12: ffff80008324bf58 x11: 0000000000000003 x10: 0000000000000002 x9 : ffff8000801a6a9c x8 : ffff00080360b300 x7 : 0000000000000000 x6 : 000000088aa35fc7 x5 : fff1000080000000 x4 : ffff8000842ddd30 x3 : 0000000000000001 x2 : 0000000100000000 x1 : 0000000000000001 x0 : 0000000000000078 Call trace: panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor] op_remap_cb.isra.22+0x50/0x80 __drm_gpuvm_sm_unmap+0x10c/0x1c8 drm_gpuvm_sm_unmap+0x40/0x60 panthor_vm_exec_op+0xb4/0x3d0 [panthor] panthor_vm_bind_exec_sync_op+0x154/0x278 [panthor] panthor_ioctl_vm_bind+0x160/0x4a0 [panthor] drm_ioctl_kernel+0xbc/0x138 drm_ioctl+0x240/0x500 __arm64_sys_ioctl+0xb0/0xf8 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.1+0x98/0xf8 do_el0_svc+0x24/0x38 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xc8 el0t_64_sync+0x174/0x178 EPSS 0.3%Vulnerability | GCVE Database | ||
| Medium | – | EPSS 0.2% | CVE-2025-40246Linux kernel · xfs: fix out of bounds memory read error in symlink repair xfs/286 produced this MediumEPSS 0.2%GCVE DatabaseCVE-2025-40246 In the Linux kernel, the following vulnerability has been resolved: xfs: fix out of bounds memory read error in symlink repair xfs/286 produced this report on my test fleet: ================================================================== BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110 Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184): memcpy_orig+0x54/0x110 xrep_symlink_salvage_inline+0xb3/0xf0 [xfs] xrep_symlink_salvage+0x100/0x110 [xfs] xrep_symlink+0x2e/0x80 [xfs] xrep_attempt+0x61/0x1f0 [xfs] xfs_scrub_metadata+0x34f/0x5c0 [xfs] xfs_ioc_scrubv_metadata+0x387/0x560 [xfs] xfs_file_ioctl+0xe23/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128 allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago): xfs_init_local_fork+0x79/0xe0 [xfs] xfs_iformat_local+0xa4/0x170 [xfs] xfs_iformat_data_fork+0x148/0x180 [xfs] xfs_inode_from_disk+0x2cd/0x480 [xfs] xfs_iget+0x450/0xd60 [xfs] xfs_bulkstat_one_int+0x6b/0x510 [xfs] xfs_bulkstat_iwalk+0x1e/0x30 [xfs] xfs_iwalk_ag_recs+0xdf/0x150 [xfs] xfs_iwalk_run_callbacks+0xb9/0x190 [xfs] xfs_iwalk_ag+0x1dc/0x2f0 [xfs] xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs] xfs_iwalk+0xa4/0xd0 [xfs] xfs_bulkstat+0xfa/0x170 [xfs] xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs] xfs_file_ioctl+0xbf2/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014 ================================================================== On further analysis, I realized that the second parameter to min() is not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data buffer. if_bytes can be smaller than the data fork size because: (a) the forkoff code tries to keep the data area as large as possible (b) for symbolic links, if_bytes is the ondisk file size + 1 (c) forkoff is always a multiple of 8. Case in point: for a single-byte symlink target, forkoff will be 8 but the buffer will only be 2 bytes long. In other words, the logic here is wrong and we walk off the end of the incore buffer. Fix that. EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2025-40265 In the Linux kernel, the following vulnerability has been resolved: vfat: fix missing sb_min_blocksize() return value checks When emulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, but without format, a kernel panic was triggered during the early boot stage while attempting to mount a vfat filesystem. [95553.682035] EXT4-fs (nvme0n1): unable to set blocksize [95553.684326] EXT4-fs (nvme0n1): unable to set blocksize [95553.686501] EXT4-fs (nvme0n1): unable to set blocksize [95553.696448] ISOFS: unsupported/invalid hardware sector size 8192 [95553.697117] ------------[ cut here ]------------ [95553.697567] kernel BUG at fs/buffer.c:1582! [95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI [95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary) [95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0 [95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f [95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246 [95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001 [95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000 [95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000 [95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000 [95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000 [95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0 [95553.708439] PKRU: 55555554 [95553.708734] Call Trace: [95553.709015] <TASK> [95553.709266] __getblk_slow+0xd2/0x230 [95553.709641] ? find_get_block_common+0x8b/0x530 [95553.710084] bdev_getblk+0x77/0xa0 [95553.710449] __bread_gfp+0x22/0x140 [95553.710810] fat_fill_super+0x23a/0xfc0 [95553.711216] ? __pfx_setup+0x10/0x10 [95553.711580] ? __pfx_vfat_fill_super+0x10/0x10 [95553.712014] vfat_fill_super+0x15/0x30 [95553.712401] get_tree_bdev_flags+0x141/0x1e0 [95553.712817] get_tree_bdev+0x10/0x20 [95553.713177] vfat_get_tree+0x15/0x20 [95553.713550] vfs_get_tree+0x2a/0x100 [95553.713910] vfs_cmd_create+0x62/0xf0 [95553.714273] __do_sys_fsconfig+0x4e7/0x660 [95553.714669] __x64_sys_fsconfig+0x20/0x40 [95553.715062] x64_sys_call+0x21ee/0x26a0 [95553.715453] do_syscall_64+0x80/0x670 [95553.715816] ? __fs_parse+0x65/0x1e0 [95553.716172] ? fat_parse_param+0x103/0x4b0 [95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0 [95553.717034] ? __do_sys_fsconfig+0x3d9/0x660 [95553.717548] ? __x64_sys_fsconfig+0x20/0x40 [95553.717957] ? x64_sys_call+0x21ee/0x26a0 [95553.718360] ? do_syscall_64+0xb8/0x670 [95553.718734] ? __x64_sys_fsconfig+0x20/0x40 [95553.719141] ? x64_sys_call+0x21ee/0x26a0 [95553.719545] ? do_syscall_64+0xb8/0x670 [95553.719922] ? x64_sys_call+0x1405/0x26a0 [95553.720317] ? do_syscall_64+0xb8/0x670 [95553.720702] ? __x64_sys_close+0x3e/0x90 [95553.721080] ? x64_sys_call+0x1b5e/0x26a0 [95553.721478] ? do_syscall_64+0xb8/0x670 [95553.721841] ? irqentry_exit+0x43/0x50 [95553.722211] ? exc_page_fault+0x90/0x1b0 [95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e [95553.723166] RIP: 0033:0x72ee774f3afe [95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48 [95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [95553.725892] RAX: ffffffffffffffda RBX: ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| Low | – | EPSS 0.2% | CVE-2025-40235Linux kernel · btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots() LowEPSS 0.2%GCVE DatabaseCVE-2025-40235 In the Linux kernel, the following vulnerability has been resolved: btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots() If fs_info->super_copy or fs_info->super_for_commit allocated failed in btrfs_get_tree_subvol(), then no need to call btrfs_free_fs_info(). Otherwise btrfs_check_leaked_roots() would access NULL pointer because fs_info->allocated_roots had not been initialised. syzkaller reported the following information: ------------[ cut here ]------------ BUG: unable to handle page fault for address: fffffffffffffbb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 64c9067 P4D 64c9067 PUD 64cb067 PMD 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 1402 Comm: syz.1.35 Not tainted 6.15.8 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), (...) RIP: 0010:arch_atomic_read arch/x86/include/asm/atomic.h:23 [inline] RIP: 0010:raw_atomic_read include/linux/atomic/atomic-arch-fallback.h:457 [inline] RIP: 0010:atomic_read include/linux/atomic/atomic-instrumented.h:33 [inline] RIP: 0010:refcount_read include/linux/refcount.h:170 [inline] RIP: 0010:btrfs_check_leaked_roots+0x18f/0x2c0 fs/btrfs/disk-io.c:1230 [...] Call Trace: <TASK> btrfs_free_fs_info+0x310/0x410 fs/btrfs/disk-io.c:1280 btrfs_get_tree_subvol+0x592/0x6b0 fs/btrfs/super.c:2029 btrfs_get_tree+0x63/0x80 fs/btrfs/super.c:2097 vfs_get_tree+0x98/0x320 fs/super.c:1759 do_new_mount+0x357/0x660 fs/namespace.c:3899 path_mount+0x716/0x19c0 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount fs/namespace.c:4427 [inline] __x64_sys_mount+0x28c/0x310 fs/namespace.c:4427 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x92/0x180 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f032eaffa8d [...] EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.7 | EPSS 0.2% | Medium5.7EPSS 0.2%GCVE DatabaseCVE-2025-40237 In the Linux kernel, the following vulnerability has been resolved: fs/notify: call exportfs_encode_fid with s_umount Calling intotify_show_fdinfo() on fd watching an overlayfs inode, while the overlayfs is being unmounted, can lead to dereferencing NULL ptr. This issue was found by syzkaller. Race Condition Diagram: Thread 1 Thread 2 -------- -------- generic_shutdown_super() shrink_dcache_for_umount sb->s_root = NULL | | vfs_read() | inotify_fdinfo() | * inode get from mark * | show_mark_fhandle(m, inode) | exportfs_encode_fid(inode, ..) | ovl_encode_fh(inode, ..) | ovl_check_encode_origin(inode) | * deref i_sb->s_root * | | v fsnotify_sb_delete(sb) Which then leads to: [ 32.133461] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 32.134438] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 32.135032] CPU: 1 UID: 0 PID: 4468 Comm: systemd-coredum Not tainted 6.17.0-rc6 #22 PREEMPT(none) <snip registers, unreliable trace> [ 32.143353] Call Trace: [ 32.143732] ovl_encode_fh+0xd5/0x170 [ 32.144031] exportfs_encode_inode_fh+0x12f/0x300 [ 32.144425] show_mark_fhandle+0xbe/0x1f0 [ 32.145805] inotify_fdinfo+0x226/0x2d0 [ 32.146442] inotify_show_fdinfo+0x1c5/0x350 [ 32.147168] seq_show+0x530/0x6f0 [ 32.147449] seq_read_iter+0x503/0x12a0 [ 32.148419] seq_read+0x31f/0x410 [ 32.150714] vfs_read+0x1f0/0x9e0 [ 32.152297] ksys_read+0x125/0x240 IOW ovl_check_encode_origin derefs inode->i_sb->s_root, after it was set to NULL in the unmount path. Fix it by protecting calling exportfs_encode_fid() from show_mark_fhandle() with s_umount lock. This form of fix was suggested by Amir in [1]. [1]: https://lore.kernel.org/all/CAOQ4uxhbDwhb+2Brs1UdkoF0a3NSdBAOQPNfEHjahrgoKJpLEw@mail.gmail.com/ EPSS 0.2%Vulnerability | GCVE Database | ||
| Low | – | EPSS 0.2% | LowEPSS 0.2%GCVE DatabaseCVE-2025-40238 In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix IPsec cleanup over MPV device When we do mlx5e_detach_netdev() we eventually disable blocking events notifier, among those events are IPsec MPV events from IB to core. So before disabling those blocking events, make sure to also unregister the devcom device and mark all this device operations as complete, in order to prevent the other device from using invalid netdev during future devcom events which could cause the trace below. BUG: kernel NULL pointer dereference, address: 0000000000000010 PGD 146427067 P4D 146427067 PUD 146488067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 1 UID: 0 PID: 7735 Comm: devlink Tainted: GW 6.12.0-rc6_for_upstream_min_debug_2024_11_08_00_46 #1 Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] Code: 00 01 48 83 05 23 32 1e 00 01 41 b8 ed ff ff ff e9 60 ff ff ff 48 83 05 00 32 1e 00 01 eb e3 66 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 47 10 48 83 05 5f 32 1e 00 01 48 8b 50 40 48 85 d2 74 05 40 RSP: 0018:ffff88811a5c35f8 EFLAGS: 00010206 RAX: ffff888106e8ab80 RBX: ffff888107d7e200 RCX: ffff88810d6f0a00 RDX: ffff88810d6f0a00 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff88811a17e620 R08: 0000000000000040 R09: 0000000000000000 R10: ffff88811a5c3618 R11: 0000000de85d51bd R12: ffff88811a17e600 R13: ffff88810d6f0a00 R14: 0000000000000000 R15: ffff8881034bda80 FS: 00007f27bdf89180(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000010f159005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] mlx5e_devcom_event_mpv+0x42/0x60 [mlx5_core] mlx5_devcom_send_event+0x8c/0x170 [mlx5_core] blocking_event+0x17b/0x230 [mlx5_core] notifier_call_chain+0x35/0xa0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_mp_event_replay+0x12/0x20 [mlx5_core] mlx5_ib_bind_slave_port+0x228/0x2c0 [mlx5_ib] mlx5_ib_stage_init_init+0x664/0x9d0 [mlx5_ib] ? idr_alloc_cyclic+0x50/0xb0 ? __kmalloc_cache_noprof+0x167/0x340 ? __kmalloc_noprof+0x1a7/0x430 __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe9/0x310 [mlx5_ib] ? kernfs_add_one+0x107/0x150 ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib] auxiliary_bus_probe+0x3e/0x90 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x62d/0x830 __auxiliary_device_add+0x3b/0xa0 ? auxiliary_device_init+0x41/0x90 add_adev+0xd1/0x150 [mlx5_core] mlx5_rescan_drivers_locked+0x21c/0x300 [mlx5_core] esw_mode_change+0x6c/0xc0 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x21e/0x640 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x170/0x170 ? devlink_nl_eswitch_get_doit+0x290/0x290 ? devlink_nl_pre_doit_port_optional+0x50/0x50 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2d0 netlink_sendmsg+0x1e4/0x410 __sock_sendmsg+0x38/0x60 ? sockfd_lookup_light+0x12/0x60 __sys_sendto+0x105/0x160 ? __sys_recvmsg+0x4e/0x90 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f27bc91b13a Code: bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 8b 05 fa 96 2c 00 45 89 c9 4c 63 d1 48 63 ff 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-40243 In the Linux kernel, the following vulnerability has been resolved: hfs: fix KMSAN uninit-value issue in hfs_find_set_zero_bits() The syzbot reported issue in hfs_find_set_zero_bits(): ===================================================== BUG: KMSAN: uninit-value in hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45 hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45 hfs_vbm_search_free+0x13c/0x5b0 fs/hfs/bitmap.c:151 hfs_extend_file+0x6a5/0x1b00 fs/hfs/extent.c:408 hfs_get_block+0x435/0x1150 fs/hfs/extent.c:353 __block_write_begin_int+0xa76/0x3030 fs/buffer.c:2151 block_write_begin fs/buffer.c:2262 [inline] cont_write_begin+0x10e1/0x1bc0 fs/buffer.c:2601 hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52 cont_expand_zero fs/buffer.c:2528 [inline] cont_write_begin+0x35a/0x1bc0 fs/buffer.c:2591 hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52 hfs_file_truncate+0x1d6/0xe60 fs/hfs/extent.c:494 hfs_inode_setattr+0x964/0xaa0 fs/hfs/inode.c:654 notify_change+0x1993/0x1aa0 fs/attr.c:552 do_truncate+0x28f/0x310 fs/open.c:68 do_ftruncate+0x698/0x730 fs/open.c:195 do_sys_ftruncate fs/open.c:210 [inline] __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x11b/0x250 fs/open.c:213 x64_sys_call+0xfe3/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:78 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4154 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x7f7/0xed0 mm/slub.c:4354 kmalloc_noprof include/linux/slab.h:905 [inline] hfs_mdb_get+0x1cc8/0x2a90 fs/hfs/mdb.c:175 hfs_fill_super+0x3d0/0xb80 fs/hfs/super.c:337 get_tree_bdev_flags+0x6e3/0x920 fs/super.c:1681 get_tree_bdev+0x38/0x50 fs/super.c:1704 hfs_get_tree+0x35/0x40 fs/hfs/super.c:388 vfs_get_tree+0xb0/0x5c0 fs/super.c:1804 do_new_mount+0x738/0x1610 fs/namespace.c:3902 path_mount+0x6db/0x1e90 fs/namespace.c:4226 do_mount fs/namespace.c:4239 [inline] __do_sys_mount fs/namespace.c:4450 [inline] __se_sys_mount+0x6eb/0x7d0 fs/namespace.c:4427 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4427 x64_sys_call+0xfa7/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 12609 Comm: syz.1.2692 Not tainted 6.16.0-syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 ===================================================== The HFS_SB(sb)->bitmap buffer is allocated in hfs_mdb_get(): HFS_SB(sb)->bitmap = kmalloc(8192, GFP_KERNEL); Finally, it can trigger the reported issue because kmalloc() doesn't clear the allocated memory. If allocated memory contains only zeros, then everything will work pretty fine. But if the allocated memory contains the "garbage", then it can affect the bitmap operations and it triggers the reported issue. This patch simply exchanges the kmalloc() on kzalloc() with the goal to guarantee the correctness of bitmap operations. Because, newly created allocation bitmap should have all available blocks free. Potentially, initialization bitmap's read operation could not fill the whole allocated memory and "garbage" in the not initialized memory will be the reason of volume coruptions and file system driver bugs. EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-40244 In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix KMSAN uninit-value issue in __hfsplus_ext_cache_extent() The syzbot reported issue in __hfsplus_ext_cache_extent(): [ 70.194323][ T9350] BUG: KMSAN: uninit-value in __hfsplus_ext_cache_extent+0x7d0/0x990 [ 70.195022][ T9350] __hfsplus_ext_cache_extent+0x7d0/0x990 [ 70.195530][ T9350] hfsplus_file_extend+0x74f/0x1cf0 [ 70.195998][ T9350] hfsplus_get_block+0xe16/0x17b0 [ 70.196458][ T9350] __block_write_begin_int+0x962/0x2ce0 [ 70.196959][ T9350] cont_write_begin+0x1000/0x1950 [ 70.197416][ T9350] hfsplus_write_begin+0x85/0x130 [ 70.197873][ T9350] generic_perform_write+0x3e8/0x1060 [ 70.198374][ T9350] __generic_file_write_iter+0x215/0x460 [ 70.198892][ T9350] generic_file_write_iter+0x109/0x5e0 [ 70.199393][ T9350] vfs_write+0xb0f/0x14e0 [ 70.199771][ T9350] ksys_write+0x23e/0x490 [ 70.200149][ T9350] __x64_sys_write+0x97/0xf0 [ 70.200570][ T9350] x64_sys_call+0x3015/0x3cf0 [ 70.201065][ T9350] do_syscall_64+0xd9/0x1d0 [ 70.201506][ T9350] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.202054][ T9350] [ 70.202279][ T9350] Uninit was created at: [ 70.202693][ T9350] __kmalloc_noprof+0x621/0xf80 [ 70.203149][ T9350] hfsplus_find_init+0x8d/0x1d0 [ 70.203602][ T9350] hfsplus_file_extend+0x6ca/0x1cf0 [ 70.204087][ T9350] hfsplus_get_block+0xe16/0x17b0 [ 70.204561][ T9350] __block_write_begin_int+0x962/0x2ce0 [ 70.205074][ T9350] cont_write_begin+0x1000/0x1950 [ 70.205547][ T9350] hfsplus_write_begin+0x85/0x130 [ 70.206017][ T9350] generic_perform_write+0x3e8/0x1060 [ 70.206519][ T9350] __generic_file_write_iter+0x215/0x460 [ 70.207042][ T9350] generic_file_write_iter+0x109/0x5e0 [ 70.207552][ T9350] vfs_write+0xb0f/0x14e0 [ 70.207961][ T9350] ksys_write+0x23e/0x490 [ 70.208375][ T9350] __x64_sys_write+0x97/0xf0 [ 70.208810][ T9350] x64_sys_call+0x3015/0x3cf0 [ 70.209255][ T9350] do_syscall_64+0xd9/0x1d0 [ 70.209680][ T9350] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 70.210230][ T9350] [ 70.210454][ T9350] CPU: 2 UID: 0 PID: 9350 Comm: repro Not tainted 6.12.0-rc5 #5 [ 70.211174][ T9350] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.212115][ T9350] ===================================================== [ 70.212734][ T9350] Disabling lock debugging due to kernel taint [ 70.213284][ T9350] Kernel panic - not syncing: kmsan.panic set ... [ 70.213858][ T9350] CPU: 2 UID: 0 PID: 9350 Comm: repro Tainted: G B 6.12.0-rc5 #5 [ 70.214679][ T9350] Tainted: [B]=BAD_PAGE [ 70.215057][ T9350] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.215999][ T9350] Call Trace: [ 70.216309][ T9350] <TASK> [ 70.216585][ T9350] dump_stack_lvl+0x1fd/0x2b0 [ 70.217025][ T9350] dump_stack+0x1e/0x30 [ 70.217421][ T9350] panic+0x502/0xca0 [ 70.217803][ T9350] ? kmsan_get_metadata+0x13e/0x1c0 [ 70.218294][ Message fromT sy9350] kmsan_report+0x296/slogd@syzkaller 0x2aat Aug 18 22:11:058 ... kernel :[ 70.213284][ T9350] Kernel panic - not syncing: kmsan.panic [ 70.220179][ T9350] ? kmsan_get_metadata+0x13e/0x1c0 set ... [ 70.221254][ T9350] ? __msan_warning+0x96/0x120 [ 70.222066][ T9350] ? __hfsplus_ext_cache_extent+0x7d0/0x990 [ 70.223023][ T9350] ? hfsplus_file_extend+0x74f/0x1cf0 [ 70.224120][ T9350] ? hfsplus_get_block+0xe16/0x17b0 [ 70.224946][ T9350] ? __block_write_begin_int+0x962/0x2ce0 [ 70.225756][ T9350] ? cont_write_begin+0x1000/0x1950 [ 70.226337][ T9350] ? hfsplus_write_begin+0x85/0x130 [ 70.226852][ T9350] ? generic_perform_write+0x3e8/0x1060 [ 70.227405][ T9350] ? __generic_file_write_iter+0x215/0x460 [ 70.227979][ T9350] ? generic_file_write_iter+0x109/0x5e0 [ 70.228540][ T9350] ? vfs_write+0xb0f/0x14e0 [ 70.228997][ T9350] ? ksys_write+0x23e/0x490 ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.7 | EPSS 0.2% | CVE-2025-40247Linux kernel · drm/msm: Fix pgtable prealloc error path Medium5.7EPSS 0.2%GCVE DatabaseCVE-2025-40247 In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix pgtable prealloc error path The following splat was reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008d0fd8000 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 5 UID: 1000 PID: 149076 Comm: Xwayland Tainted: G S 6.16.0-rc2-00809-g0b6974bb4134-dirty #367 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Qualcomm Technologies, Inc. SM8650 HDK (DT) pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : build_detached_freelist+0x28/0x224 lr : kmem_cache_free_bulk.part.0+0x38/0x244 sp : ffff000a508c7a20 x29: ffff000a508c7a20 x28: ffff000a508c7d50 x27: ffffc4e49d16f350 x26: 0000000000000058 x25: 00000000fffffffc x24: 0000000000000000 x23: ffff00098c4e1450 x22: 00000000fffffffc x21: 0000000000000000 x20: ffff000a508c7af8 x19: 0000000000000002 x18: 00000000000003e8 x17: ffff000809523850 x16: ffff000809523820 x15: 0000000000401640 x14: ffff000809371140 x13: 0000000000000130 x12: ffff0008b5711e30 x11: 00000000001058fa x10: 0000000000000a80 x9 : ffff000a508c7940 x8 : ffff000809371ba0 x7 : 781fffe033087fff x6 : 0000000000000000 x5 : ffff0008003cd000 x4 : 781fffe033083fff x3 : ffff000a508c7af8 x2 : fffffdffc0000000 x1 : 0001000000000000 x0 : ffff0008001a6a00 Call trace: build_detached_freelist+0x28/0x224 (P) kmem_cache_free_bulk.part.0+0x38/0x244 kmem_cache_free_bulk+0x10/0x1c msm_iommu_pagetable_prealloc_cleanup+0x3c/0xd0 msm_vma_job_free+0x30/0x240 msm_ioctl_vm_bind+0x1d0/0x9a0 drm_ioctl_kernel+0x84/0x104 drm_ioctl+0x358/0x4d4 __arm64_sys_ioctl+0x8c/0xe0 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x3c/0xe0 do_el0_svc+0x18/0x20 el0_svc+0x30/0x100 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x170/0x174 Code: aa0203f5 b26287e2 f2dfbfe2 aa0303f4 (f8737ab6) ---[ end trace 0000000000000000 ]--- Since msm_vma_job_free() is called directly from the ioctl, this looks like an error path cleanup issue. Which I think results from prealloc_cleanup() called without a preceding successful prealloc_allocate() call. So handle that case better. Patchwork: https://patchwork.freedesktop.org/patch/678677/ EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-40250 In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clean up only new IRQ glue on request_irq() failure The mlx5_irq_alloc() function can inadvertently free the entire rmap and end up in a crash[1] when the other threads tries to access this, when request_irq() fails due to exhausted IRQ vectors. This commit modifies the cleanup to remove only the specific IRQ mapping that was just added. This prevents removal of other valid mappings and ensures precise cleanup of the failed IRQ allocation's associated glue object. Note: This error is observed when both fwctl and rds configs are enabled. [1] mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1 mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to request irq. err = -28 infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while trying to test write-combining support mlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1 mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1 mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to request irq. err = -28 infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while trying to test write-combining support mlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1 mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to request irq. err = -28 mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to request irq. err = -28 general protection fault, probably for non-canonical address 0xe277a58fde16f291: 0000 [#1] SMP NOPTI RIP: 0010:free_irq_cpu_rmap+0x23/0x7d Call Trace: <TASK> ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] ? __die_body.cold+0x8/0xa ? die_addr+0x39/0x53 ? exc_general_protection+0x1c4/0x3e9 ? dev_vprintk_emit+0x5f/0x90 ? asm_exc_general_protection+0x22/0x27 ? free_irq_cpu_rmap+0x23/0x7d mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] irq_pool_request_vector+0x7d/0x90 [mlx5_core] mlx5_irq_request+0x2e/0xe0 [mlx5_core] mlx5_irq_request_vector+0xad/0xf7 [mlx5_core] comp_irq_request_pci+0x64/0xf0 [mlx5_core] create_comp_eq+0x71/0x385 [mlx5_core] ? mlx5e_open_xdpsq+0x11c/0x230 [mlx5_core] mlx5_comp_eqn_get+0x72/0x90 [mlx5_core] ? xas_load+0x8/0x91 mlx5_comp_irqn_get+0x40/0x90 [mlx5_core] mlx5e_open_channel+0x7d/0x3c7 [mlx5_core] mlx5e_open_channels+0xad/0x250 [mlx5_core] mlx5e_open_locked+0x3e/0x110 [mlx5_core] mlx5e_open+0x23/0x70 [mlx5_core] __dev_open+0xf1/0x1a5 __dev_change_flags+0x1e1/0x249 dev_change_flags+0x21/0x5c do_setlink+0x28b/0xcc4 ? __nla_parse+0x22/0x3d ? inet6_validate_link_af+0x6b/0x108 ? cpumask_next+0x1f/0x35 ? __snmp6_fill_stats64.constprop.0+0x66/0x107 ? __nla_validate_parse+0x48/0x1e6 __rtnl_newlink+0x5ff/0xa57 ? kmem_cache_alloc_trace+0x164/0x2ce rtnl_newlink+0x44/0x6e rtnetlink_rcv_msg+0x2bb/0x362 ? __netlink_sendskb+0x4c/0x6c ? netlink_unicast+0x28f/0x2ce ? rtnl_calcit.isra.0+0x150/0x146 netlink_rcv_skb+0x5f/0x112 netlink_unicast+0x213/0x2ce netlink_sendmsg+0x24f/0x4d9 __sock_sendmsg+0x65/0x6a ____sys_sendmsg+0x28f/0x2c9 ? import_iovec+0x17/0x2b ___sys_sendmsg+0x97/0xe0 __sys_sendmsg+0x81/0xd8 do_syscall_64+0x35/0x87 entry_SYSCALL_64_after_hwframe+0x6e/0x0 RIP: 0033:0x7fc328603727 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 RSP: 002b:00007ffe8eb3f1a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc328603727 RDX: 0000000000000000 RSI: 00007ffe8eb3f1f0 RDI: 000000000000000d RBP: 00007ffe8eb3f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00000000000 ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-40251 In the Linux kernel, the following vulnerability has been resolved: devlink: rate: Unset parent pointer in devl_rate_nodes_destroy The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 EPSS 0.2%Vulnerability | GCVE Database | ||
| Critical | 9.8 | EPSS 0.5% | Critical9.8EPSS 0.5%GCVE DatabaseCVE-2025-40257 In the Linux kernel, the following vulnerability has been resolved: mptcp: fix a race in mptcp_pm_del_add_timer() mptcp_pm_del_add_timer() can call sk_stop_timer_sync(sk, &entry->add_timer) while another might have free entry already, as reported by syzbot. Add RCU protection to fix this issue. Also change confusing add_timer variable with stop_timer boolean. syzbot report: BUG: KASAN: slab-use-after-free in __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616 Read of size 4 at addr ffff8880311e4150 by task kworker/1:1/44 CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025 Workqueue: events mptcp_worker Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616 sk_stop_timer_sync+0x1b/0x90 net/core/sock.c:3631 mptcp_pm_del_add_timer+0x283/0x310 net/mptcp/pm.c:362 mptcp_incoming_options+0x1357/0x1f60 net/mptcp/options.c:1174 tcp_data_queue+0xca/0x6450 net/ipv4/tcp_input.c:5361 tcp_rcv_established+0x1335/0x2670 net/ipv4/tcp_input.c:6441 tcp_v4_do_rcv+0x98b/0xbf0 net/ipv4/tcp_ipv4.c:1931 tcp_v4_rcv+0x252a/0x2dc0 net/ipv4/tcp_ipv4.c:2374 ip_protocol_deliver_rcu+0x221/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:239 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6079 [inline] __netif_receive_skb+0x143/0x380 net/core/dev.c:6192 process_backlog+0x31e/0x900 net/core/dev.c:6544 __napi_poll+0xb6/0x540 net/core/dev.c:7594 napi_poll net/core/dev.c:7657 [inline] net_rx_action+0x5f7/0xda0 net/core/dev.c:7784 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] __local_bh_enable_ip+0x1a0/0x2e0 kernel/softirq.c:302 mptcp_pm_send_ack net/mptcp/pm.c:210 [inline] mptcp_pm_addr_send_ack+0x41f/0x500 net/mptcp/pm.c:-1 mptcp_pm_worker+0x174/0x320 net/mptcp/pm.c:1002 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 44: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:400 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:417 kasan_kmalloc include/linux/kasan.h:262 [inline] __kmalloc_cache_noprof+0x1ef/0x6c0 mm/slub.c:5748 kmalloc_noprof include/linux/slab.h:957 [inline] mptcp_pm_alloc_anno_list+0x104/0x460 net/mptcp/pm.c:385 mptcp_pm_create_subflow_or_signal_addr+0xf9d/0x1360 net/mptcp/pm_kernel.c:355 mptcp_pm_nl_fully_established net/mptcp/pm_kernel.c:409 [inline] __mptcp_pm_kernel_worker+0x417/0x1ef0 net/mptcp/pm_kernel.c:1529 mptcp_pm_worker+0x1ee/0x320 net/mptcp/pm.c:1008 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Freed by task 6630: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 __kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:587 kasan_save_free_info mm/kasan/kasan.h:406 [inline] poison_slab_object m ---truncated--- EPSS 0.5%Vulnerability | GCVE Database | ||
| Critical | 9.8 | EPSS 0.6% | CVE-2025-40261Linux kernel · nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl() Critical9.8EPSS 0.6%GCVE DatabaseCVE-2025-40261 In the Linux kernel, the following vulnerability has been resolved: nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl() nvme_fc_delete_assocation() waits for pending I/O to complete before returning, and an error can cause ->ioerr_work to be queued after cancel_work_sync() had been called. Move the call to cancel_work_sync() to be after nvme_fc_delete_association() to ensure ->ioerr_work is not running when the nvme_fc_ctrl object is freed. Otherwise the following can occur: [ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL [ 1135.917705] ------------[ cut here ]------------ [ 1135.922336] kernel BUG at lib/list_debug.c:52! [ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary) [ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025 [ 1135.950969] Workqueue: 0x0 (nvme-wq) [ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f [ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b [ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046 [ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000 [ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0 [ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08 [ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100 [ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0 [ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000 [ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0 [ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1136.055910] PKRU: 55555554 [ 1136.058623] Call Trace: [ 1136.061074] <TASK> [ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.071898] ? move_linked_works+0x4a/0xa0 [ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.081744] ? __die_body.cold+0x8/0x12 [ 1136.085584] ? die+0x2e/0x50 [ 1136.088469] ? do_trap+0xca/0x110 [ 1136.091789] ? do_error_trap+0x65/0x80 [ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.101289] ? exc_invalid_op+0x50/0x70 [ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20 [ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.120806] move_linked_works+0x4a/0xa0 [ 1136.124733] worker_thread+0x216/0x3a0 [ 1136.128485] ? __pfx_worker_thread+0x10/0x10 [ 1136.132758] kthread+0xfa/0x240 [ 1136.135904] ? __pfx_kthread+0x10/0x10 [ 1136.139657] ret_from_fork+0x31/0x50 [ 1136.143236] ? __pfx_kthread+0x10/0x10 [ 1136.146988] ret_from_fork_asm+0x1a/0x30 [ 1136.150915] </TASK> | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-40018 Published: 2025-12-02 Updated: 2026-03-25 Reference: CVE-2025-40018 2026-03-25 Update: Added patch versions for Ubuntu nodes with GKE. 2025-12-11 Update: Added patch versions and a severity rating for GDC (VMware). GKE Updated: 2026-03-25 Description Severity The following vulnerabilities were discovered in the Linux kernel that can lead to a privilege escalation on Container-Optimized OS nodes: CVE-2025-40018 GKE Standard clusters are impacted. GKE Autopilot clusters in the default configuration are not impacted, but might be vulnerable if you explicitly set the seccomp Unconfined profile or allow CAP_NET_ADMIN . Clusters using GKE Sandbox aren't impacted. What should I do? 2026-03-25 Update : The following versions of GKE are updated with code to fix this vulnerability on Ubuntu. Upgrade your Ubuntu node pools to the following versions or later: 1.35.1-gke.1396000 1.34.4-gke.1047000 1.33.8-gke.1026000 1.32.12-gke.1026000 1.31.14-gke.1336000 1.30.14-gke.1991000 The following minor versions are affected. Upgrade your Container-Optimized OS node pools to one of the following patch versions or later: 1.32.9-gke.1330000 1.29.15-gke.2236000 1.30.14-gke.1525000 1.31.13-gke.1231000 1.34.1-gke.2541000 1.28.15-gke.2966000 1.33.5-gke.1350000 You can apply patch versions from newer release channels if your cluster runs the same minor version in its own release channel. This feature lets you secure your nodes until the patch version becomes the default in your release channel. For details, see Run patch versions from a newer channel . High GDC (VMware) Updated: 2025-12-11 Description Severity The following vulnerabilities were discovered in the Linux kernel that can lead to a privilege escalation on Container-Optimized OS nodes: CVE-2025-40018 What should I do? The following versions of GDC (VMware) are updated with code to fix this vulnerability. Upgrade your GDC (VMware) clusters to the following versions or later: 1.31.1100-gke.40 Note: Patch versions and a severity assessment for GDC software for VMware are in progress. We'll update this bulletin with that information when it's available. High GKE on AWS Description Severity The following vulnerabilities were discovered in the Linux kernel that can lead to a privilege escalation on Container-Optimized OS nodes: CVE-2025-40018 What should I do? Note: Patch versions and a severity assessment for GKE on AWS are in progress. We'll update this bulletin with that information when it's available. Pending GKE on Azure Description Severity The following vulnerabilities were discovered in the Linux kernel that can lead to a privilege escalation on Container-Optimized OS nodes: CVE-2025-40018 What should I do? Note: Patch versions and a severity assessment for GKE on Azure are in progress. We'll update this bulletin with that information when it's available. Pending GDC (bare metal) Description Severity The following vulnerabilities were discovered in the Linux kernel that can lead to a privilege escalation on Container-Optimized OS nodes: CVE-2025-40018 What should I do? There is no action required. GDC software for bare metal isn't affected as it does not bundle an operating system in its distribution. None | GCVE Database | ||
| Critical | 9.3 | EPSS 0.7% | CVE-2025-66259DB Electronica Telecomunicazioni S.p.A Mozart FM Transmitter · Improper Input Validation Critical9.3EPSS 0.7%CVE Database V5CVE-2025-66259 Authenticated Root Remote Code Execution via improrer user input filtering in DB Electronica Telecomunicazioni S.p.A. Mozart FM Transmitter versions 30, 50, 100, 300, 500, 1000, 2000, 3000, 3500, 6000, 7000 allows an attacker to perform in main_ok.php user supplied data/hour/time is passed directly into date shell command | CVE Database V5 | ||
| Critical | 9.2 | EPSS 0.4% | CVE-2025-65015authlib joserfc · Unthrottled Resource Allocation Critical9.2EPSS 0.4%CVE Database V5CVE-2025-65015 ### Summary The `ExceededSizeError` exception messages are embedded with non-decoded JWT token parts and may cause Python logging to record an arbitrarily large, forged JWT payload. ### Details In situations where a misconfigured — or entirely absent — production-grade web server sits in front of a Python web application, an attacker may be able to send arbitrarily large bearer tokens in the HTTP request headers. When this occurs, Python logging or diagnostic tools (e.g., Sentry) may end up processing extremely large log messages containing the full JWT header during the `joserfc.jwt.decode()` operation. The same behavior also appears when validating claims and signature payload sizes, as the library raises `joserfc.errors.ExceededSizeError()` with the full payload embedded in the exception message. Since the payload is already fully loaded into memory at this stage, the library cannot prevent or reject it per se. It is therefore the responsibility of the underlying web server (`uvicorn`/`h11`, `gunicorn`, `Starlette`, `Werkzeug`, `nginx`...etc) to enforce limits on header sizes. For example, a `FastAPI`/`Starlette` application running _without_ `uvicorn` and/or `gunicorn` cannot enforce header size limits on its own. With `uvicorn`/`h11`, the [--h11-max-incomplete-event-size <int>](https://uvicorn.dev/settings/#implementation:~:text=%2D%2Dh11%2Dmax%2Dincomplete%2Devent%2Dsize%20%3Cint%3E) option can restrict the total size of the header _plus_ body, but not the header alone. Similarly, [vLLM serve](https://docs.vllm.ai/en/latest/cli/serve/#-h11-max-incomplete-event-size) —due to its reliance on `uvicorn`/`h11` and the need for heavy data transfer in ML inference workloads, sets a default limit of 4 MB for header _plus_ body and is frequently increased. In practice, a robust reverse proxy (such as `nginx`) is typically required because it can explicitly cap maximum header size. Unfortunately, many web applications do not run behind a proper reverse proxy. Given these constraints, the `joserfc` library cannot safely log or embed payloads of arbitrary size. This issue is particularly subtle, as it occurs only when a maliciously crafted JWT finally reaches the Python application, a scenario that most developers will never encounter during routine development and testing. ### PoC **Environment** Ubuntu 24.04 LTS Python 3.12 Tested on `joserfc` version `1.4.1` ```python import logging from datetime import UTC, datetime, timedelta from joserfc import jwt from joserfc.errors import ExceededSizeError, UnsupportedAlgorithmError from joserfc.jwk import OctKey logger = logging.getLogger(__name__) SECRET_KEY = "8c13bd66babc241b29f8553429bdab7deb6f5b74ddfda7765471e57ecd55641e" LONG_JWT_TOKEN = ( "eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NmRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRSUzI1NmRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRSUzI1NmRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRSUzI1NmRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRSUzI1NmRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRSUzI1NmRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGRkZGQifQ" "." "eyJpc3MiOiJhdXRoX3NlcnZlciIsImlhdCI6MTc2MzI0OTEwMSwiZXhwIjoxNzY5MjQ5MTAxfQ" "." "6-k2jmkGXD6wXOgYgjPS8E5lS_GjWpgIuY54gokjAn8" ) HEADER = { "alg": ( "RS256dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd" "RS256dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd" "RS256dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd" "RS256dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd" "RS256dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd" "RS256dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd" ), } CLAIMS = { "iss": "auth_server", "iat": datetime.now(UTC), "exp": datetime.now(UTC) + timedelta(minutes=15), } def main(): # Create OctKey from SECRET_KEY key = OctKey.import_key(SECRET_KEY) # Simulate creating a very large JWT # (this will fail with joserfc.errors.UnsupportedAlgorithmError # due to an invalid 'alg' header content try: token = jwt.encode(HEADER, CLAIMS, key) except UnsupportedAlgorithmError: # Use a forged token that has the same header and claims instead # but an invalid signature token = LONG_JWT_TOKEN logger.warning(f"Created JWT: {token}") # Now try to decode the large JWT try: decoded_token = jwt.decode(token, key) logger.warning("This line will never be reached.") logger.warning(decoded_token.claims) except ExceededSizeError: logger.exception( "The JWT size is too large and may be a security attack attempt." ) # this i | CVE Database V5 | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2025-40181 In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP When running as an SNP or TDX guest under KVM, force the legacy PCI hole, i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC via a forced variable MTRR range. In most KVM-based setups, legacy devices such as the HPET and TPM are enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and optionally a SystemMemory descriptor for an OperationRegion, e.g. if the device needs to be accessed via a Control Method. If a SystemMemory entry is present, then the kernel's ACPI driver will auto-ioremap the region so that it can be accessed at will. However, the ACPI spec doesn't provide a way to enumerate the memory type of SystemMemory regions, i.e. there's no way to tell software that a region must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86. The dedicated device drivers however, e.g. the HPET driver and TPM driver, want to map their associated memory as UC or WC, as accessing PCI devices using WB is unsupported. On bare metal and non-CoCO, the conflicting requirements "work" as firmware configures the PCI hole (and other device memory) to be UC in the MTRRs. So even though the ACPI mappings request WB, they are forced to UC- in the kernel's tracking due to the kernel properly handling the MTRR overrides, and thus are compatible with the drivers' requested WC/UC-. With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their requested WB if the ACPI mappings are established before the dedicated driver code attempts to initialize the device. E.g. if acpi_init() runs before the corresponding device driver is probed, ACPI's WB mapping will "win", and result in the driver's ioremap() failing because the existing WB mapping isn't compatible with the requested WC/UC-. E.g. when a TPM is emulated by the hypervisor (ignoring the security implications of relying on what is allegedly an untrusted entity to store measurements), the TPM driver will request UC and fail: [ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0 [ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12 Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC). E.g. tracing mapping requests for TPM TIS yields: Mapping TPM TIS with req_type = 0 WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460 Modules linked in: CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025 RIP: 0010:memtype_reserve+0x2ab/0x460 __ioremap_caller+0x16d/0x3d0 ioremap_cache+0x17/0x30 x86_acpi_os_ioremap+0xe/0x20 acpi_os_map_iomem+0x1f3/0x240 acpi_os_map_memory+0xe/0x20 acpi_ex_system_memory_space_handler+0x273/0x440 acpi_ev_address_space_dispatch+0x176/0x4c0 acpi_ex_access_region+0x2ad/0x530 acpi_ex_field_datum_io+0xa2/0x4f0 acpi_ex_extract_from_field+0x296/0x3e0 acpi_ex_read_data_from_field+0xd1/0x460 acpi_ex_resolve_node_to_value+0x2ee/0x530 acpi_ex_resolve_to_value+0x1f2/0x540 acpi_ds_evaluate_name_path+0x11b/0x190 acpi_ds_exec_end_op+0x456/0x960 acpi_ps_parse_loop+0x27a/0xa50 acpi_ps_parse_aml+0x226/0x600 acpi_ps_execute_method+0x172/0x3e0 acpi_ns_evaluate+0x175/0x5f0 acpi_evaluate_object+0x213/0x490 acpi_evaluate_integer+0x6d/0x140 acpi_bus_get_status+0x93/0x150 acpi_add_single_object+0x43a/0x7c0 acpi_bus_check_add+0x149/0x3a0 acpi_bus_check_add_1+0x16/0x30 acpi_ns_walk_namespace+0x22c/0x360 acpi_walk_namespace+0x15c/0x170 acpi_bus_scan+0x1dd/0x200 acpi_scan_init+0xe5/0x2b0 acpi_init+0x264/0x5b0 do_one_i ---truncated--- EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2025-40184 In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix debug checking for np-guests using huge mappings When running with transparent huge pages and CONFIG_NVHE_EL2_DEBUG then the debug checking in assert_host_shared_guest() fails on the launch of an np-guest. This WARN_ON() causes a panic and generates the stack below. In __pkvm_host_relax_perms_guest() the debug checking assumes the mapping is a single page but it may be a block map. Update the checking so that the size is not checked and just assumes the correct size. While we're here make the same fix in __pkvm_host_mkyoung_guest(). Info: # lkvm run -k /share/arch/arm64/boot/Image -m 704 -c 8 --name guest-128 Info: Removed ghost socket file "/.lkvm//guest-128.sock". [ 1406.521757] kvm [141]: nVHE hyp BUG at: arch/arm64/kvm/hyp/nvhe/mem_protect.c:1088! [ 1406.521804] kvm [141]: nVHE call trace: [ 1406.521828] kvm [141]: [<ffff8000811676b4>] __kvm_nvhe_hyp_panic+0xb4/0xe8 [ 1406.521946] kvm [141]: [<ffff80008116d12c>] __kvm_nvhe_assert_host_shared_guest+0xb0/0x10c [ 1406.522049] kvm [141]: [<ffff80008116f068>] __kvm_nvhe___pkvm_host_relax_perms_guest+0x48/0x104 [ 1406.522157] kvm [141]: [<ffff800081169df8>] __kvm_nvhe_handle___pkvm_host_relax_perms_guest+0x64/0x7c [ 1406.522250] kvm [141]: [<ffff800081169f0c>] __kvm_nvhe_handle_trap+0x8c/0x1a8 [ 1406.522333] kvm [141]: [<ffff8000811680fc>] __kvm_nvhe___skip_pauth_save+0x4/0x4 [ 1406.522454] kvm [141]: ---[ end nVHE call trace ]--- [ 1406.522477] kvm [141]: Hyp Offset: 0xfffece8013600000 [ 1406.522554] Kernel panic - not syncing: HYP panic: [ 1406.522554] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.522554] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.522554] VCPU:0000000000000000 [ 1406.523337] CPU: 3 UID: 0 PID: 141 Comm: kvm-vcpu-0 Not tainted 6.16.0-rc7 #97 PREEMPT [ 1406.523485] Hardware name: FVP Base RevC (DT) [ 1406.523566] Call trace: [ 1406.523629] show_stack+0x18/0x24 (C) [ 1406.523753] dump_stack_lvl+0xd4/0x108 [ 1406.523899] dump_stack+0x18/0x24 [ 1406.524040] panic+0x3d8/0x448 [ 1406.524184] nvhe_hyp_panic_handler+0x10c/0x23c [ 1406.524325] kvm_handle_guest_abort+0x68c/0x109c [ 1406.524500] handle_exit+0x60/0x17c [ 1406.524630] kvm_arch_vcpu_ioctl_run+0x2e0/0x8c0 [ 1406.524794] kvm_vcpu_ioctl+0x1a8/0x9cc [ 1406.524919] __arm64_sys_ioctl+0xac/0x104 [ 1406.525067] invoke_syscall+0x48/0x10c [ 1406.525189] el0_svc_common.constprop.0+0x40/0xe0 [ 1406.525322] do_el0_svc+0x1c/0x28 [ 1406.525441] el0_svc+0x38/0x120 [ 1406.525588] el0t_64_sync_handler+0x10c/0x138 [ 1406.525750] el0t_64_sync+0x1ac/0x1b0 [ 1406.525876] SMP: stopping secondary CPUs [ 1406.525965] Kernel Offset: disabled [ 1406.526032] CPU features: 0x0000,00000080,8e134ca1,9446773f [ 1406.526130] Memory Limit: none [ 1406.959099] ---[ end Kernel panic - not syncing: HYP panic: [ 1406.959099] PS:834003c9 PC:0000b1806db6d170 ESR:00000000f2000800 [ 1406.959099] FAR:ffff8000804be420 HPFAR:0000000000804be0 PAR:0000000000000000 [ 1406.959099] VCPU:0000000000000000 ] EPSS 0.2%Vulnerability | GCVE Database |
Page 11 of 23