Search: drivers-check.com
81 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-72358 In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: prevent invalid cursor access for purged BOs During a page table walk for binding, xe_pt_stage_bind() explicitly skips initializing the xe_res_cursor for purged BOs, treating them similarly to NULL VMAs by only setting the cursor size. However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check if the BO was purged before attempting to walk the cursor using xe_res_dma() and xe_res_next(). Because the cursor was left uninitialized for purged BOs, this falls through and triggers warnings like: WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next Fix this by explicitly checking if the BO is purged in both xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just as we do for NULL VMAs, avoiding the invalid cursor accesses entirely. As a precaution, also zero-initialize the cursor in xe_pt_stage_bind() to ensure we don't pass garbage data into the page table walkers if we ever hit a similar edge case in the future. (cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e) | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-72432 A vulnerability in the Linux kernel's tpm_crb driver was resolved by adding a check for the presence of the ACPI companion object during device probing. Without this check, platform drivers relying on the ACPI companion could be forced to match devices incorrectly due to device_match_driver_override(), potentially leading to improper device handling. | GCVE Database | ||
| Medium | 6.9 | EPSS 0.1% | CVE-2026-20783Intel(R) NPU Driver · Denial of Service Medium6.9EPSS 0.1%CVE Database V5CVE-2026-20783 Improper conditions check in the firmware for the Intel(R) NPU Driver for all versions within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | CVE Database V5 | ||
| Medium | 5.8 | EPSS <0.1% | CVE-2026-20908Intel(R) NPU Driver for Windows · Denial of Service Medium5.8EPSS <0.1%CVE Database V5CVE-2026-20908 Time-of-check time-of-use race condition for the Intel(R) NPU Driver for Windows for all versions within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | CVE Database V5 | ||
| High | 8.3 | EPSS 0.6% | High8.3EPSS 0.6%CVE Database V5CVE-2026-20776 Improper conditions check for some Intel(R) PROSet/Wireless WiFi Software within Ring 2: Device Drivers may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. | CVE Database V5 | ||
| High | 7.1 | EPSS 0.3% | High7.1EPSS 0.3%CVE Database V5CVE-2026-20747 Improper conditions check for some Intel(R) PROSet/Wireless WiFi Software within Ring 2: Device Drivers may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | CVE Database V5 | ||
| High | 7.1 | EPSS 0.3% | High7.1EPSS 0.3%CVE Database V5CVE-2026-20739 Improper conditions check for some Intel(R) PROSet/Wireless WiFi Software for Windows within Ring 2: Device Drivers may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (low) impacts. | CVE Database V5 | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-68206 In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC active reference counts HEVC slice parameters are shared stateless V4L2 controls, but the common validation path does not verify the active L0/L1 reference counts before driver-specific code consumes them. The original report came from Cedrus, but the active count bounds are not Cedrus-specific. Validate them in the common HEVC slice control path so stateless HEVC drivers get the same basic guarantees as soon as the control is queued. Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may use out-of-range sentinel values such as 0xff for missing references, and some hardware can use that information for concealment. Keep this common check limited to the active reference counts. | GCVE Database | ||
| Low | 2.0 | EPSS 0.2% | Low2.0EPSS 0.2%GCVE DatabaseCVE-2026-68281 In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Count paired job fence as dependency in prepare_job() The DRM scheduler's prepare_job() callback counts the remaining non-signaled native dependencies for a job, preventing job submission until those (plus job data and fence update) can fit in the job queue's CCCB. This means checking which dependencies can be waited upon in the firmware, i.e. whether they are backed by a UFO object, i.e. whether their drm_sched_fence::parent has been assigned to a pvr_queue_fence::base fence. That happens when the job owning the fence is submitted to the firmware. Paired geometry and fragment jobs are submitted at the same time, which means the dependency between them can't be checked this way before submission. Update job_count_remaining_native_deps() to take into account the dependency between paired jobs. This fixes cases where prepare_job() underestimated the space left in an almost full fragment CCCB, wrongly unblocking run_job(), which then returned early without writing the full sequence of commands to the CCCB. The above lead to kernel warnings such as the following and potentially job timeouts (depending on waiters on the missing commands): [ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47 [ 375.703160] Modules linked in: [ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT [ 375.703613] Tainted: [W]=WARN [ 375.703627] Hardware name: Texas Instruments AM625 SK (DT) [ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched] [ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] [ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr] [ 375.703921] sp : ffff800084a97650 [ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000 [ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000 [ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008 [ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000 [ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000 [ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3 [ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008 [ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000 [ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f [ 375.704317] Call trace: [ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P) [ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr] [ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr] [ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched] [ 375.704623] process_one_work+0x520/0x1288 [ 375.704658] worker_thread+0x3f0/0xb3c [ 375.704680] kthread+0x334/0x3d8 [ 375.704706] ret_from_fork+0x10/0x20 [ 375.704736] ---[ end trace 0000000000000000 ]--- EPSS 0.2%Vulnerability | GCVE Database | ||
| Critical | 9.6 | EPSS 0.3% | Critical9.6EPSS 0.3%GCVE DatabaseCVE-2026-68124 In the Linux kernel, the following vulnerability has been resolved: mctp: serial: handle zero-length frames to prevent rx buffer overflow The MCTP serial receive state machine reads a frame length byte in mctp_serial_push_header() case 2 and validates it upper-bound-only: if (c > MCTP_SERIAL_FRAME_MTU) { dev->rxstate = STATE_ERR; } else { dev->rxlen = c; dev->rxpos = 0; dev->rxstate = STATE_DATA; ... } A length of zero passes this check, so rxlen is set to 0 and the state machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the incoming byte is stored and rxpos incremented before the terminator is dev->rxbuf[dev->rxpos] = c; dev->rxpos++; dev->rxstate = STATE_DATA; if (dev->rxpos == dev->rxlen) { dev->rxpos = 0; dev->rxstate = STATE_TRAILER; } With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is already 1 on the first data byte), so subsequent bytes are written past the end of the fixed 74-byte rxbuf, which is the last member of the netdev private area. Every following data byte is an attacker-controlled 1-byte out-of-bounds heap write, and the overflow continues until a frame (0x7e) or escape byte resets the parser -- effectively unbounded. Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line discipline and bring the resulting mctpserialN netdev up, after which the bytes arrive via the tty receive path. Route a zero-length frame straight to STATE_TRAILER instead of STATE_DATA. The trailer/framing bytes are still consumed, and the frame resolves to a zero-length skb that the MCTP core rejects; the parser never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can no longer occur. KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this change): UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370 index 74 is out of range for type 'u8 [74]' BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf Write of size 1 at addr ... by task kworker/u16:0 mctp_serial_tty_receive_buf tty_ldisc_receive_buf flush_to_ldisc Allocated by task 152: alloc_netdev_mqs mctp_serial_open v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so the trailer/framing bytes are still consumed (Jeremy Kerr). Found by 0sec automated security-research tooling (https://0sec.ai). EPSS 0.3%Vulnerability | GCVE Database | ||
| Medium | 6.6 | EPSS 0.1% | CVE-2026-11743zephyrproject zephyr · Bounds Medium6.6EPSS 0.1%CVE Database V5CVE-2026-11743 The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not. In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access. The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread. The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition. EPSS 0.1%Vulnerability | CVE Database V5 | ||
| High | 5.1 | EPSS 0.2% | High5.1EPSS 0.2%GCVE DatabaseCVE-2026-64571 In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying. | GCVE Database | ||
| –Not rated | – | Tenable Research As federal enforcement tightens and states begin stepping in with their own cybersecurity mandates, water and wastewater utilities face a looming wave of hard compliance deadlines, compounded by recent cyber attacks on state water utilities. Key takeaways While the EPA’s national sanitary-survey mandate stalled in court, the agency is aggressively using existing authority, technical guidance, and enforcement alerts to inspect cyber gaps. Community water systems serving 3,301 to 49,999 people, the vast majority of U.S. systems, must certify their Risk and Resilience Assessments (RRAs) by June 30, 2026, under AWIA 2013. New York has already finalized binding cybersecurity regulations for wastewater facilities, setting a regulatory template that other states are expected to follow in 2026 and 2027. Under CIRCIA, utilities will soon be legally required to report significant cyber incidents to CISA within 72 hours and ransom payments within 24 hours. Federal grant programs (SLCGP) and liability protections have been extended through Sept. 30, 2026, but remain tied to unpredictable budget cycles while targeted cyber threats continue to rise. Navigating the new reality of water cyber regulation In 2023, the U.S. EPA made an initial push to fold cybersecurity evaluations into state sanitary surveys. While that effort was stayed in court and subsequently withdrawn, the underlying federal statutory requirements and enforcement drivers remain fully active. Instead of relying on new survey rules, federal and state regulators are actively using existing statutory authority and technical guidance to shift water cybersecurity from voluntary recommendations to enforceable compliance deadlines. The urgency to strengthen cybersecurity for water facilities is underscored by a recent coordinated cyber attack that disrupted water and wastewater utility operations across more than 30 Minnesota communities in late July 2026. Utility cyber regulations and mandates moving forward America’s Water Infrastructure Act (AWIA) 2013 / Safe Drinking Water Act (SDWA) 1433 is still very much in force. Community water systems serving more than 3,300 people are legally required to certify a Risk and Resilience Assessment (RRA) and Emergency Response Plan (ERP) to EPA on a five-year recertification cycle, and that cycle explicitly covers cyber threats, not just physical and natural hazards. Recertification deadlines: Systems serving 100,000-plus people: March 31, 2025 50,000–99,999 tier: Dec. 31, 2025 3,301–49,999 tier, the vast majority of U.S. water systems: June 30, 2026, with ERPs due six months after. The EPA hasn’t stopped pushing on cyber. It’s just doing it through guidance, technical assistance, and enforcement of existing authority rather than new rulemaking. In May 2024, the EPA issued an enforcement alert warning it would step up inspections tied to cybersecurity gaps found in drinking water systems. On Oct. 23, 2025, the EPA released an updated package of cyber tools: Revised Emergency Response Plan guide Cybersecurity Incident Response Plan (CIRP) template Incident-specific checklists Cybersecurity procurement checklist These tools are designed to help utilities fold cybersecurity directly into the RRA/ERP process they’re already required to complete. States are stepping in where EPA stepped back With the EPA’s national sanitary-survey mandate dead, states have started writing their own cybersecurity rules for water systems. New York is the clearest example: In March 2026, the New York State Department of Environmental Conservation finalized amendments to six New York Codes, Rules and Regulations (NYCRR) Parts 616, 650 and 750 , adding binding cybersecurity regulations for wastewater treatment facilities, including mandatory incident reporting and access-control requirements built around EPA’s own cybersecurity guidance, incorporated into the rule by reference. Reporting requirements took effect March 26, 2026. It’s a template other states are watchi… | Tenable Research | |||
| Critical | 9.8 | EPSS 0.7% | CVE-2026-64268Linux kernel · Out-of-bounds Write Critical9.8EPSS 0.7%GCVE DatabaseCVE-2026-64268 In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%CVE Database V5CVE-2026-64227 A vulnerability in the Linux kernel's ACPI driver was addressed by adding checks for NULL values returned by ACPI_COMPANION() during device probing. This flaw affected platform drivers relying on the device's ACPI companion object, which could be incorrectly matched due to device_match_driver_override(). The fix involved adding NULL checks to 13 platform drivers and standardizing error returns in the ACPI thermal zone driver. EPSS 0.2%Vulnerability | CVE Database V5 | ||
| Low | 3.3 | EPSS 0.1% | CVE-2026-10679zephyrproject zephyr · Dos Low3.3EPSS 0.1%CVE Database V5CVE-2026-10679 The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency. spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure(). On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service. The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact. EPSS 0.1%Vulnerability | CVE Database V5 |
Page 2 of 5 · 4 duplicate CVE records merged