Inefficient algorithmic complexity in the webmail's message view of the REST API in Progressive Robot hMailServer 6.3.2 through 6.3.5 allows a remote unauthenticated attacker to make the webmail, the administration console and the REST API unavailable by sending a message. The route that renders a received message's HTML replaced each reference to an embedded image in place, with work that grew with the square of the number of references, and wrote the image out for every reference while counting it against its size limit only once. A message whose HTML refers to one small embedded image a very large number of times, opened in the webmail by its recipient, therefore keeps one of the listener's four worker threads busy for minutes and makes it build a document of gigabytes, so that a few such messages leave the HTTP listener unable to answer anybody.
Improper certificate validation in the webmail of Progressive Robot hMailServer 6.3.2 through 6.3.5 allows a remote unauthenticated attacker to have S/MIME-encrypted mail that the account later sends to another correspondent also encrypted to the attacker's key. When its recipient opened a signed message, the webmail kept the signer's certificate for encrypting replies whether or not the server found its chain trusted, under the first e-mail address the certificate listed rather than the message's From address, and beside any certificate already held for that address. Encrypted mail later sent from the webmail to that address was encrypted to every certificate held for it, so a holder of the kept certificate's key who obtains a copy of such a message can read it.
Inefficient algorithmic complexity in the REST API (6.3.3 through 6.3.5) and the IMAP PREVIEW response (6.2.22 through 6.3.5) of Progressive Robot hMailServer allows a remote unauthenticated attacker to make the webmail, the administration console and the REST API unavailable by sending a message. To show a snippet of each message in a folder's message list, the server decoded the character entity references of a message that has an HTML part and no text part with a string replacement whose work grew with the square of their number. A received HTML-only message holding a very large number of entity references therefore keeps one of the listener's four worker threads busy for minutes or longer each time the recipient's webmail lists the folder, without the message being opened, so that a few such listings leave the HTTP listener unable to answer anybody. The IMAP PREVIEW response read such text the same way, holding an IMAP thread for each client that asks for the preview of such a message. The flaw is in the server's shared string class, whose replace and remove both ran in quadratic time.
Progressive Robot hMailServer 6.0.0 through 6.3.5 processes several IMAP commands from a signed-in account in time quadratic in the command's length or in the number of elements it names, and can be made to hold memory out of proportion to a command. The FETCH data-item parser normalised a BODY[] section with a case-insensitive string replacement that copied the whole item per occurrence and split the item list by repeatedly copying the remainder of the command; the server's case-insensitive search compared a needle afresh at every position, so a long SEARCH TEXT key over a message cost the product of the two lengths; SEARCH message sets and the saved-result marker ($), SORT criteria, HEADER.FIELDS name lists and UID ranges were each read once per message rather than once per command; and a FETCH naming a message's sections very many times read and held every section in memory before sending any. An IMAP command may continue past one line through non-synchronizing literals, so one command can reach about eleven megabytes. The IMAP worker threads are a small pool shared with SMTP and POP3, so a signed-in user sending such commands can make the IMAP, SMTP and POP3 services stop responding (CWE-407) and can consume excessive memory (CWE-400).
Inefficient algorithmic complexity in the decoding of message header fields in Progressive Robot hMailServer 6.0.0 through 6.3.5 allows a remote unauthenticated attacker to make the IMAP, SMTP and POP3 services, or the webmail, unavailable by sending a message. The server unfolded a decoded header value by finding each line break from the end of the value and removing it, moving the rest of the value each time, so its work grew with the square of the number of line breaks, and an RFC 2047 encoded word may decode to any number of them. A received message whose Subject or other header field holds such a value keeps a worker thread busy for minutes or longer each time the value is read: when the recipient's IMAP client searches, sorts or threads the folder by a header, when the webmail lists the folder, and, where configured, when a rule tests a header, a spam tag is added to the Subject or an abuse report is read during delivery. The IMAP worker threads are shared with SMTP and POP3, so a few such messages stop those services responding. The server's reading of a message header from its file also searched everything read so far after each 4,000 bytes, costing seconds for a header of tens of megabytes.
Inefficient algorithmic complexity in the bounce and complaint processing of Progressive Robot hMailServer 6.3.4 and 6.3.5 allows a remote unauthenticated attacker to stop mail delivery by sending messages, when bounce processing or complaint processing is enabled or a mailing list is managed by the server (none is by default). The readers of incoming delivery status notifications (RFC 3464) and abuse feedback reports (RFC 5965) removed the blank lines at the start of the returned headers part two bytes at a time, copying the rest of the part each time, so their work grew with the square of the number of blank lines. A message shaped like such a report, whose headers part begins with a very large number of blank lines within the reader's 2 MB limit, keeps a delivery thread busy for over a minute while it is delivered, and a few such messages a minute keep every delivery thread busy.
Improper link resolution and external control of file paths in the administrative command-line operations of hMailServer.exe in Progressive Robot hMailServer 6.3.4 and 6.3.5 allow a local attacker who already runs code as the low-privilege service account to escalate privilege. On Windows, operations run with administrator rights by the installer, DBSetup, the Control Panel or an administrator wrote log entries and crash records into the log folder, created, deleted and changed the permissions of the self-signed certificate and private key in the data folder, and rewrote message files in the data folder, all by path in folders the service account (NT SERVICE\hMailServer, the default for new installations since 6.3.4) can modify, following junctions and mount points; and the store-maintenance operations reached files by names taken from the database, which the service account can write, including names outside the data folder. On Linux, the store-maintenance and object-storage operations run as root followed symbolic links the service account (the packaged hmailserver user, which owns the data folder) planted in it, so a root-run operation read, wrote or removed the link's target as root. A local attacker controlling the service account can thereby gain the administrator's (Windows) or root's (Linux) privileges when such an operation is run.
Inefficient algorithmic complexity in the inbound DKIM and ARC signature verification of Progressive Robot hMailServer 6.0.0 through 6.3.5 allows a remote unauthenticated attacker to make the mail services unavailable by sending a message. Building the canonical header and choosing the header fields named in a signature's h= tag took time growing with the square of the message's header: the 'simple' canonicalisation prepended each continuation line of a folded field to the lines already gathered, and both canonicalisations searched the gathered fields from the bottom for each h= name and erased the match from the middle of the list. A message whose header holds very many fields, or a field folded over very many lines, with a DKIM-Signature the attacker signs for a domain they control, keeps a worker thread busy for tens of seconds per signature; up to ten signatures are evaluated per message by each of the DKIM and DMARC tests, on the threads that serve delivery and SMTP.
Inefficient algorithmic complexity and a non-terminating loop in the MIME processing of received messages in Progressive Robot hMailServer 6.0.0 through 6.3.5 allow a remote unauthenticated attacker to make the mail services unavailable by sending a message. Removing a MIME header parameter whose value is empty and directly followed by a semicolon (for example a Content-Disposition with 'filename=a.bat; filename=;') entered a loop that never terminates, holding a worker thread at full load until the server is restarted; this is reached when the attachment blocker renames a blocked attachment or a filename is set over the REST API. Separately, decoding a header field that holds many RFC 2047 encoded words of an encoding other than base64 or quoted-printable, removing a parameter with many RFC 2231 continuations, and deleting many header fields of one name each took time growing with the square of the message, on the small thread pools that serve IMAP, SMTP and POP3 connections, delivery and the REST API.
Inefficient algorithmic complexity in the SPF macro expansion of Progressive Robot hMailServer 6.3.4 and 6.3.5 allows a remote unauthenticated attacker to consume worker-thread time by publishing a crafted SPF record. RFC 7208 section 7.1 requires a name too long to look up to lose whole labels from the left; the server did this by removing one label at a time and copying the rest of the name each time, so the work grew with the square of the expansion. An attacker who publishes an SPF record for a domain they control, with a mechanism whose domain-spec expands through macros to a name far longer than 253 characters, makes the SPF check of a message from that domain take several seconds. The expansion is bounded by SPF's own per-term and per-macro limits, so the loss of availability is partial.
Inefficient complexity in the Sieve filter evaluation of Progressive Robot hMailServer 6.2.24 through 6.3.5 allows an authenticated account holder to make the mail services unavailable with their own filter. A ':matches' pattern was matched by a backtracking descent whose time grew with the matched value's length raised to the number of wildcards, so a pattern such as '*a*a*a*b' over 800 characters took 44 seconds; and 'deleteheader' erased the fields it removed one at a time, so removing many fields of one name over a message's header cost O(N^2) (80,000 fields took 18.8 seconds). Sieve filters run on the small, shared delivery thread pool, so an account holder whose active script does this, fed a few messages they can send themselves, empties the pool and stops delivery for the whole server. The script is the account holder's own and cannot be set for another user.
Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.0.0 through 6.3.5 allow a local authenticated user to read the mail server's data. The installer created the data, log, temp, database and event folders and the hMailServer.INI configuration file with the permissions inherited from the installation folder, by default under Program Files, which give the local Users group read access. Any user who can sign in to the computer could read every stored message, the logs, the built-in database with the accounts' password hashes whenever the service is stopped, and the configuration file, including the database password, which is sealed only with the machine's DPAPI key and can be unsealed by any local account; with an external database that password gives full control of it. The Linux AppImage of 6.3.0 through 6.3.5 likewise created its per-user data folders readable by other local users.
Inefficient algorithmic complexity in the JSON reader of Progressive Robot hMailServer allows a remote unauthenticated attacker to make the mail services unavailable. Reading a JSON object kept the first of each duplicated member name by searching the members already read, so an object of N distinct member names cost O(N^2): 1 MB took 8.9 seconds and 4 MB took 300 seconds against the affected code. A remote attacker reaches the reader without an account by mailing a crafted TLS-RPT report (up to 16 MB after decompression) to a hosted domain's published report mailbox, which is read on a delivery thread; a few such reports hold every delivery thread (ten by default), so the server delivers no mail, local or outbound, for over an hour per report. A signed-in account reaches the same 16 MB body through the webmail's own REST routes, holding the REST API's own worker threads. Where no report mailbox is configured, the unauthenticated REST sign-in routes that read a JSON body are capped at 64 KB and are not affected.
Heap-based buffer overflow in the legacy Blowfish encryption routine (BlowFishEncryptor::Encode, called by EncryptToString) in Progressive Robot hMailServer 6.0.0 through 6.3.5 allows an authenticated mailbox user to cause a denial of service (service crash), and possibly other unspecified impact. In 6.3.4 and 6.3.5, where the self-service REST API is enabled (it is off by default), the user does this remotely by adding a fetch account whose password is 129 to 247 characters long and not a multiple of 8, and then requesting their personal data export (GET /api/v1/me/export.zip), which encrypts that password with the legacy scheme. The same flaw is reachable on Windows by any local interactive user with no hMailServer credentials, through the COM method Utilities.BlowfishEncrypt, which checked no authentication. It is also reachable by every stored-secret write when ProtectStoredSecretsWithDPAPI is set to 0. For such a length, the routine's padding loop writes up to 7 zero bytes 2 to 232 bytes past the end of its 255-byte heap buffer. The ciphertext it returns is still correct.
Heap-based buffer overflow in the legacy Blowfish decryption routine (BlowFishEncryptor::DecryptFromString) in Progressive Robot hMailServer 6.0.0 through 6.3.3 on Windows allows a local interactive user with no hMailServer credentials to write bytes of their choosing past the end of a 255-byte heap buffer in the hMailServer service process, which runs as LocalSystem by default. The user does this by passing a long hexadecimal string to the COM method Utilities.BlowfishDecrypt, which checked no authentication. The routine converted hexadecimal input of any length into a fixed 255-byte buffer before decrypting it in place. The result is a denial of service (service crash), and possibly code execution with the privileges of the service account.
Cross-site scripting in the webmail of Progressive Robot hMailServer 6.3.2 through 6.3.5 allows a remote attacker who can send a user an encrypted message to run script in the webmail's origin with that user's session. When the webmail decrypted an S/MIME message (from 6.3.2) or an OpenPGP message (from 6.3.4) in the browser, it offered each decrypted attachment as a blob URL of the media type the message declared for it. A click saved the file, but if the user opened the attachment in a new tab, a part declared as text/html was rendered as a document of the webmail's origin and its script could read the mailbox, send mail and change the account through the REST API. The webmail is served only when the REST API is enabled, which it is not by default.
Missing network timeouts in the Linux builds of Progressive Robot hMailServer 6.3.0 through 6.3.5 allow a remote attacker to hold server threads indefinitely and so stop outbound mail delivery (denial of service). The server set its socket timeouts in the form Windows takes, which Linux refuses, and its HTTPS clients read without a deadline, so a peer that accepts a connection and then sends nothing held the waiting thread for as long as the connection stayed open. The MTA-STS policy fetch, enabled by default, is made during outbound delivery to mta-sts.<recipient domain>, so anyone who can make the server deliver mail to a domain they control - for example as the envelope sender of a message that bounces - can hold delivery threads until outbound delivery stops. The same flaw affects the DANE TLSA query, the OAuth2 token request, the ACME client, and the ManageSieve and metrics listeners, which a silent client stops from serving anyone else. Windows builds are not affected.
Missing Host header validation and missing throttling of failed administrator sign-ins in the REST API listener of Progressive Robot hMailServer 6.0.0 through 6.3.5 allow a remote attacker to brute-force the server administrator's password through the administrator's own browser by DNS rebinding. The listener, which is off by default and bound to the loopback when enabled, answered requests whatever their Host header named, and a failed sign-in with the administrator's password from the loopback was neither auto-banned nor delayed. A web page whose host name the attacker rebinds to 127.0.0.1, opened in a browser on the server, can therefore send authenticated requests to the listener, read the answers and try administrator passwords at full speed until one is accepted, giving the attacker full administrative control of the mail server.
Missing authorization on COM objects in Progressive Robot hMailServer 6.0.0 through 6.3.5 (Windows only) lets a local interactive user with no hMailServer credential read and write arbitrary files as the service account and queue mail as any sender. The service registers its COM classes with no DCOM access or launch permission and calls CoInitializeSecurity with no security descriptor, so any user logged on at the console or over Remote Desktop can activate the classes in the running service; a hMailServer.Message, its Attachments and Attachment, and a hMailServer.FetchAccount created this way carry a credential that never authenticated. Attachments.Add(path) and Attachment.SaveAs(path) performed no authorization check, and Message.Save/Copy and FetchAccount.AccountID/Save performed none either up to 6.3.3 and from 6.3.4 treated a holder with no credential as the server's own event-script host. Because the service does not impersonate the COM caller, Attachments.Add reads any file the service account can read and returns it, Attachment.SaveAs writes attacker-chosen bytes to any path it can write (on a LocalSystem installation, code execution as SYSTEM), Message.Save queues outbound mail from any address past the SMTP checks, and FetchAccount attaches a mail-fetch job to any mailbox. The objects an Application handed out behave the same once a later Authenticate on that Application fails.
The Linux live-update apply helper (hmailserver-update) of Progressive Robot hMailServer 6.3.4 and 6.3.5 runs as root on a request file written by the unprivileged hmailserver service account, and took from that request the program used to verify an AppImage update's signature and the systemd unit to stop before reading the service account's files. An attacker who already runs code as the hmailserver service account, for example through another flaw in the mail server, can therefore have arbitrary code executed as root, on any Linux installation where the live update's path unit is active - the default for the project's .deb and .rpm packages - and on AppImage installations run under that unit.