Search: route.ts
839 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | – | EPSS 0.2% | CVE-2026-80847Linux kernel · tcp: clamp route advmss to TCP_MIN_MSS MediumEPSS 0.2%GCVE DatabaseCVE-2026-80847 In the Linux kernel, the following vulnerability has been resolved: tcp: clamp route advmss to TCP_MIN_MSS tcp_select_initial_window() assumes that callers never pass an MSS smaller than 1, but route-derived advmss values can violate that assumption. A too-small explicit RTAX_ADVMSS is one way to get there, but it is not the only one. The same divide-by-zero can also be reached through the "default advmss" path when RTAX_ADVMSS is left at 0 and the effective advmss is later driven down by route MTU and min_adv_mss. Introduce a tcp_dst_advmss() helper that clamps route advmss to TCP_MIN_MSS before TCP consumes it, and use it in the TCP paths that derive advmss from dst metrics. This keeps the effective MSS from dropping to zero before tcp_select_initial_window() rounds the receive window. | GCVE Database | ||
| High | 8.8 | EPSS 0.5% | CVE-2026-57161pjsip pjproject · Stack-based Buffer Overflow High8.8EPSS 0.5%CVE Database V5CVE-2026-57161 A stack-based buffer overflow vulnerability exists in PJSIP's pjproject prior to commit acc03b5. The flaw occurs when processing Service-Route headers in a registration response, where an excessive number of headers can overflow a fixed-size stack array. This can lead to application crashes or memory corruption. The issue affects applications using the default registration path via the PJSUA/PJSUA2 account API. The vulnerability has been patched in commit acc03b5. | CVE Database V5 | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-80840 In the Linux kernel, the following vulnerability has been resolved: ipv6: seg6: clear IPv4 control block on IPIP decapsulation End.DX4 and End.DT4 decapsulate an IPv4 packet through decap_and_validate() and send it directly to IPv4 routing. The inner packet therefore bypasses ip_rcv_core(), which normally clears IPCB before IPv4 interprets skb->cb. The skb instead retains IP6CB data from the outer packet. IP6CB and IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and ts. The sender can make the stale optlen byte nonzero with a valid outer extension-header chain. The reproducers put an eight-byte Destination Options header immediately after the 40-byte IPv6 header and before the Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled Destination Options offset in both lastopt and nhoff, setting them to 40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees optlen = 40 and rr = 40. Both tcp_v4_save_options() and __ip_options_echo() skip option copying when optlen is zero. Here optlen is 40, so the TCP SYN path allocates room for 40 bytes of option data and calls __ip_options_echo(). The stale rr value makes that function read inner packet byte 41 as the Record Route option length. The reproducers set that sender-controlled byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte option-data area. Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5 kernel both produced: BUG: KASAN: slab-out-of-bounds in __ip_options_echo() Write of size 255 The relevant End.DX4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dx4_finish input_action_end_dx4 The relevant End.DT4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dt4 tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so it does not appear as a separate frame. When decap_and_validate() handles IPPROTO_IPIP, save the ingress interface from IP6CB, clear IPCB, and restore the saved value. Doing this in the common decapsulation path covers End.DX4, End.DT4, and End.DT46's IPv4 arm. Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after l3mdev processing, which can replace skb_iif with the L3 master; IP6CB iif still records the receiving interface set at IPv6 ingress. | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-80828 In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Complete cleanup after system-resume errors A failed system resume can leave the card unusable until reboot. usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or snd_usb_mixer_resume() fails. The error path skips the out: block, which restores D0 and decrements chip->num_suspended_intf. The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in snd_power_ref_and_wait(). USB core logs an interface resume callback error. It does not retry that callback, so a later callback cannot complete the skipped cleanup. usb_audio_suspend() increments num_suspended_intf before returning success. A system-resume callback must consume the system-suspend count even if a component resume fails. Otherwise, the stranded count skews later suspend and resume cycles. Do not apply this cleanup to runtime-resume errors. Runtime PM can retry -EAGAIN or -EBUSY without another suspend callback. The count must continue to describe that suspended interface. Other runtime-resume errors latch runtime_error in the PM core and do not cause an immediate callback retry. Both parts of the system-resume error path are longstanding. Commit 88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") introduced err_out past the D0 restore. Commit 862b2509d157c ("ALSA: usb-audio: Fix inconsistent card PM state after resume") later moved num_suspended_intf-- into the out: block. The error path now skips both operations. No third-party code is needed to reach the error path. snd_usb_mixer_resume() ends in snd_usb_mixer_activate(), which returns the result of usb_submit_urb() for devices that have a mixer status URB. Its mixer->private_resume hook can also fail through scarlett2_init_notify(). snd_usb_pcm_resume() issues a SET_CUR request to a UAC3 power domain. It can return -EPIPE or -EIO when the device stalls the request. Route a component error through out: only when system_suspend is nonzero. Continue to return runtime-resume errors through err_out. Later component resume stages remain skipped. The original error still reaches USB core. A later transfer can fail if the device did not recover. I reproduced the system-resume failure on an Audient iD14 MkI with an out-of-tree diagnostic mixer resume hook. An injected -EIO on the unpatched core left control readers in uninterruptible sleep in snd_power_ref_and_wait() until a reboot. With this patch, the same failure restored control access. A second system suspend and resume also succeeded after I disabled fault injection. | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-80846 In the Linux kernel, the following vulnerability has been resolved: xfrm: drop ESP-in-TCP packets with no ingress device ESP-in-TCP receives records through the TCP strparser. handle_esp() restores skb->dev from the saved skb_iif before passing the packet into the XFRM input path. Queued TCP data can be processed after the original ingress device has been removed, for example during veth or net namespace teardown. In that case dev_get_by_index_rcu() returns NULL. The XFRM IPv4 and IPv6 input paths both expect skb->dev to be valid while building the route lookup, so queued ESP-in-TCP data can dereference a NULL device. Drop the packet if the saved ingress device can no longer be resolved. Such a packet can no longer be routed through the normal XFRM receive path, and this preserves the existing behaviour for packets whose ingress device still exists. | GCVE Database | ||
| Medium | 5.1 | EPSS 0.2% | Medium5.1EPSS 0.2%CVE Database V5CVE-2026-82911 Cross-Site Request Forgery (CSRF) in the OrderConfirmController at GET /order/confirm/{order_number} in Roskus Prospero Flow CRM before 5.15.11 allows an unauthenticated attacker to confirm any order on behalf of an authenticated user by directing them to a crafted page. Laravel's VerifyCsrfToken middleware enforces CSRF tokens only on POST, PUT, PATCH, and DELETE requests; the Route::get declaration leaves this state-changing action unprotected. Session cookies configured with SameSite=Lax are automatically included in top-level cross-site navigation, so a single link click triggers OrderConfirmController::confirm() and transitions the target order from pending to confirmed without user authorization. Because order numbers are sequential integers, an attacker can enumerate and confirm all existing orders in a single automated sweep. | CVE Database V5 | ||
| High | 8.2 | EPSS 0.4% | High8.2EPSS 0.4%GCVE Database Traefik versions >= v3.7.0 and <= v3.7.10 contain an authentication bypass in the Kubernetes Ingress NGINX provider. The TLS option generated for an Ingress carrying the nginx.ingress.kubernetes.io/auth-tls-secret annotation was named after the Ingress namespace and name. As a result, two Ingress objects sharing the same host, the same client CA secret, and the same client-authentication mode produced two distinct TLS option names for that host. Traefik treats this as a TLS options conflict and falls back to the entry point's default TLS configuration, which does not request a client certificate, so a route configured with nginx.ingress.kubernetes.io/auth-tls-verify-client: "on" becomes reachable without a client certificate. Only the v3.7 line is affected; the issue is fixed in v3.7.11. | GCVE Database | ||
| Medium | 6.5 | EPSS 0.7% | CVE-2026-75602OpenListTeam OpenList · Path Traversal Medium6.5EPSS 0.7%CVE Database V5CVE-2026-75602 OpenList a file list program that supports multiple storage. Prior to 4.2.3, OpenList's offline-download feature at POST /api/fs/add_offline_download with tool: "SimpleHttp" accepts an attacker-supplied URL and saves its bytes under a per-task temporary directory before transferring them to the user's destination storage. The temporary filename comes from the attacker-controlled Content-Disposition header, is passed from parseFilenameFromContentDisposition in internal/offline_download/http/util.go to filepath.Join(task.TempDir, filename) in SimpleHttp.Run in internal/offline_download/http/client.go, and is opened with os.Create without a containment check. Because filepath.Join cleans .. segments, a non-admin user with PermAddOfflineDownload on any path can traverse out of task.TempDir and create, truncate, or overwrite any file writable by the OpenList process whose parent directory already exists. The server/handles/offline_download.go AddOfflineDownload route uses normal user authentication rather than AuthAdmin, and local-storage destinations fall through tryPutUrl in internal/offline_download/tool/add.go to the vulnerable SimpleHttp.Run path. This issue is fixed in version 4.2.3. | CVE Database V5 | ||
| High | 7.5 | EPSS 0.3% | CVE-2026-82397Tornado · Urlencoded body parsing omits max_num_fields, so one request can stall the event loop High7.5EPSS 0.3%GCVE DatabaseCVE-2026-82397 Tornado's parsing of application/x-www-form-urlencoded request bodies does not limit the number of fields parsed, allowing a specially crafted request with many separators to create tens of millions of fields. This parsing occurs synchronously on the single-threaded event loop before request handling, causing the entire server to stall and resulting in a denial of service. No authentication is required to trigger this condition if any route accepts form posts. The issue affects Tornado versions from 1.2.0 up to but not including 4.6.3 and is fixed in version 4.6.3. | GCVE Database | ||
| Medium | 6.9 | EPSS 0.7% | CVE-2026-84856rowboatlabs rowboat · Denial of Service Medium6.9EPSS 0.7%CVE Database V5CVE-2026-84856 A vulnerability was detected in rowboatlabs rowboat up to 0.9.1. The impacted element is the function request.text/req.json of the file apps/rowboat/app/api/composio/webhook/route.ts of the component Composio Webhook Endpoint. The manipulation results in denial of service. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 0.9.2 is sufficient to resolve this issue. Upgrading the affected component is recommended. The legacy Next.js app was deleted at 0.9.2 rather than patched, leaving no security control behind. EPSS 0.7%Vulnerability | CVE Database V5 | ||
| High | 8.1 | EPSS <0.1% | CVE-2026-84381pydantic httpcore2 · Cleartext Transmission High8.1EPSS <0.1%CVE Database V5CVE-2026-84381 ### Summary httpcore2 does not start TLS for `wss://` connections routed through a SOCKS5 proxy. The WebSocket opening handshake and all subsequent frames are sent in plaintext through the proxy path, despite the caller selecting the secure `wss` scheme. The transport flaw affects httpcore2 releases before `2.10.0`. HTTPX2 exposed this behavior through its public `Client.websocket()` and `AsyncClient.websocket()` APIs from `2.6.0` through `2.9.1`. ### Details The synchronous and asynchronous SOCKS5 connection implementations upgrade the established proxy tunnel to TLS only when the remote origin scheme is `https`. The equivalent check does not include `wss`. After the SOCKS5 handshake succeeds, the raw stream is therefore passed directly to the HTTP/1.1 connection, which writes the WebSocket upgrade request without first performing a TLS handshake or verifying the destination certificate. For example, an application using HTTPX2 `2.6.0` through `2.9.1` may open an authenticated WebSocket through a SOCKS proxy: ```python import httpx2 with httpx2.Client(proxy="socks5://proxy.example:1080") as client: with client.websocket( "wss://service.example/private?token=query-secret", headers={"Authorization": "Bearer header-secret"}, cookies={"session": "cookie-secret"}, ) as websocket: websocket.send_text("private message") ``` On affected versions, the stream passing through the SOCKS proxy begins with a plaintext request such as: ```text GET /private?token=query-secret HTTP/1.1 Host: service.example Authorization: Bearer header-secret Cookie: session=cookie-secret ``` Before HTTPX2 `2.6.0`, the same underlying httpcore2 behavior could be reached by integrations constructing a WebSocket upgrade request through the low-level transport API, but HTTPX2 did not yet provide its native WebSocket client API. A normal secure WebSocket server will usually reject these plaintext bytes because it expects a TLS ClientHello. However, a malicious or compromised SOCKS proxy can accept the SOCKS connection, observe the plaintext handshake, return a forged `101 Switching Protocols` response, and then read or modify WebSocket frames in both directions. An observer between the proxy and destination may also read the plaintext traffic. RFC 6455 requires a client using a secure WebSocket connection to perform the TLS handshake before sending the WebSocket opening handshake. A `wss` URI promises confidentiality, integrity, and endpoint authentication through TLS. ### Impact An attacker able to control or observe the SOCKS proxy path can obtain URL query parameters, authorization headers, cookies, and application messages that the caller expected TLS to protect. Because no TLS handshake occurs, certificate verification also does not occur, allowing an attacker controlling the proxy to impersonate the WebSocket server and inject or alter messages. Only `wss://` connections routed through a SOCKS5 proxy are affected. Direct `wss://` connections and ordinary `https://` requests through SOCKS already start TLS correctly. ### Mitigation Upgrade HTTPX2 and httpcore2 to `2.10.0` or later. Patched versions start TLS for both `https` and `wss` origins in the synchronous and asynchronous SOCKS5 connection paths. If upgrading is not immediately possible, do not route `wss://` connections through a SOCKS proxy. Use a direct secure WebSocket connection or another transport that performs and verifies TLS to the WebSocket origin. | CVE Database V5 | ||
| High | 7.1 | EPSS 0.4% | High7.1EPSS 0.4%CVE Database V5CVE-2026-49249 Boruta is a standalone authorization server that aims to implement OAuth 2.0 and Openid Connect up to decentralized identity specifications. Prior to version 0.10.0, BorutaIdentityWeb.UserSettingsController.update/2 atomizes every key of the user-supplied request body via String.to_atom/1 before any validation. Because String.to_atom interns atoms permanently in the BEAM atom table (default cap 1,048,576 atoms; ERL_MAX_ATOMS), any authenticated end user can send PUT /users/settings with a user[<fresh-key>]=... body containing fresh keys per request and exhaust the global VM atom table. Once the table is full, the BEAM aborts with no more index entries in atom_tab and the entire OIDC server (auth, admin, gateway apps in the umbrella) crashes. The route is protected only by require_authenticated_user and a per-IP rate limit of 10 requests/second; a logged-in end user can hit it. The keys are atomized unconditionally before the downstream Accounts.update_user/6 call, so even failing updates contribute to exhaustion. This issue has been patched in version 0.10.0. | CVE Database V5 | ||
| Medium | 5.3 | EPSS 0.4% | Medium5.3EPSS 0.4%CVE Database V5CVE-2026-78153 The Restrict User Access WordPress plugin before 2.8.1 does not normalise the REST API route before checking it against the routes its content protection covers, allowing unauthenticated users to bypass that protection and read restricted content and enumerate users. | CVE Database V5 | ||
| Medium | 5.3 | EPSS 0.8% | CVE-2026-81197MasterStudy LMS WordPress Plugin · Information Exposure Medium5.3EPSS 0.8%CVE Database V5CVE-2026-81197 The MasterStudy LMS WordPress Plugin WordPress plugin before 3.7.46 does not restrict access to a REST route that lists an author's courses, nor does it filter that listing by publication status, allowing unauthenticated users to read the titles and IDs of unpublished (draft, pending and private) courses. | CVE Database V5 | ||
| Medium | 6.5 | EPSS 0.4% | CVE-2026-84365honojs hono · Path Traversal Medium6.5EPSS 0.4%CVE Database V5CVE-2026-84365 Hono is a Web application framework that provides support for any JavaScript runtime. From 4.12.12 until 4.13.5, the fix released for CVE-2026-39408 does not cover every traversal sequence, and toSSG() can still write files outside the configured output directory when a route parameter contains consecutive parent-directory segments. Static site generation builds each output path from the route path and values supplied through ssgParams, then verifies that the result stays inside the output directory using the same normalization routine that built the path. That routine does not fully collapse runs of consecutive parent-directory segments, allowing a path that the check accepts to resolve outside the output directory, and the check also treats output directories that differ in how they are rooted as equivalent. This arises when an application generates a static site from route parameter values it does not fully control, such as slugs from a CMS, API, or user submission. An untrusted ssgParams value can create or overwrite files elsewhere in the build environment and alter generated artifacts or deployment output. The vulnerability affects build-time static site generation only; request-time routing and applications with entirely developer-controlled ssgParams values are not affected. This issue is fixed in version 4.13.5. | CVE Database V5 | ||
| Medium | 5.1 | EPSS 0.2% | Medium5.1EPSS 0.2%CVE Database V5CVE-2026-84305 sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, sqlparse.format(sql, reindent=True) and sqlformat --reindent route attacker-controlled parenthesized tuple lists through ReindentFilter._get_offset() in sqlparse/filters/reindent.py, where _flatten_up_to_token() repeatedly rebuilds and joins the statement prefix. Thousands of offset calculations walk an expanding token tree, producing quadratic CPU consumption for inputs that remain below MAX_GROUPING_TOKENS and causing request delays, reduced throughput, or worker starvation. This issue is fixed in version 0.6.0. | CVE Database V5 | ||
| Low | 2.3 | EPSS 0.5% | CVE-2026-82731ash_typescript · Open Redirect Low2.3EPSS 0.5%CVE Database V5CVE-2026-82731 URL Redirection to Untrusted Site ('Open Redirect') vulnerability in ash-project ash_typescript allows an attacker who controls a path-parameter value to redirect a generated client's request, and the credentials attached to it, to an unintended route or an external origin. The URL builders in lib/ash_typescript/typed_controller/codegen/route_renderer.ex replace each :param placeholder with a bare template interpolation and never call encodeURIComponent, so the value reaches executeTypedControllerRequest raw. A value containing ../ is normalised away by the fetch URL resolver and reaches a different route, while ? or # truncates the path and can smuggle or override query parameters. For a route whose path begins with a parameter, a value such as /evil.example.com/x yields the protocol-relative URL //evil.example.com/x, sending the request and the credentials from TypedControllerConfig to an attacker-controlled host. Nothing constrains the value at runtime: get_path_param_type/2 emits only a TypeScript type, which is erased. The query-string path is unaffected, since URLSearchParams.set encodes its own values. This issue affects ash_typescript: from 0.15.0 before 0.18.0. | CVE Database V5 |
Page 22 of 51 · 3 duplicate CVE records merged