Fulcio is a certificate authority for issuing code signing certificates for an OpenID Connect (OIDC) identity. Prior to 1.8.5, Fulcio's metaRegex() function uses unanchored regex, allowing attackers to bypass MetaIssuer URL validation and trigger SSRF to arbitrary internal services. Since the SSRF only can trigger GET requests, the request cannot mutate state. The response from the GET request is not returned to the caller so data exfiltration is not possible. A malicious actor could attempt to probe an internal network through Blind SSRF. This vulnerability is fixed in 1.8.5.
In the Linux kernel, the following vulnerability has been resolved: rtc: amlogic-a4: fix double free caused by devm The clock obtained via devm_clk_get_enabled() is automatically managed by devres and will be disabled and freed on driver detach. Manually calling clk_disable_unprepare() in error path and remove function causes double free. Remove the redundant clk_disable_unprepare() calls from the probe error path and aml_rtc_remove(), allowing the devm framework to automatically manage the clock lifecycle.
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix invalid probe error return value After DME Link Startup, the error return value is set to the MIPI UniPro GenericErrorCode which can be 0 (SUCCESS) or 1 (FAILURE). Upon failure during driver probe, the error code 1 is propagated back to the driver probe function which must return a negative value to indicate an error, but 1 is not negative, so the probe is considered to be successful even though it failed. Subsequently, removing the driver results in an oops because it is not in a valid state. This happens because none of the callers of ufshcd_init() expect a non-negative error code. Fix the return value and documentation to match actual usage.
A vulnerability in the Linux kernel's MOST USB subsystem caused double free and use-after-free errors during late probe failures. This issue arises from the subsystem's non-standard interface registration function, which frees interfaces on registration failures and deregistration, leading to memory management bugs. The flaw has been addressed in updated Linux kernel versions.
In the Linux kernel, the following vulnerability has been resolved: net: mdio: Check regmap pointer returned by device_node_to_regmap() The call to device_node_to_regmap() in airoha_mdio_probe() can return an ERR_PTR() if regmap initialization fails. Currently, the driver stores the pointer without validation, which could lead to a crash if it is later dereferenced. Add an IS_ERR() check and return the corresponding error code to make the probe path more robust.
In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Remove calls to drm_put_dev() Since the allocation of the drivers main structure was changed to devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd should be done by devres. However, drm_put_dev() is still in the probe error and device remove paths. When the driver fails to probe warnings like the following are shown because devres is trying to drm_put_dev() after the driver already did it. [ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22 [ 5.649605] ------------[ cut here ]------------ [ 5.649607] refcount_t: underflow; use-after-free. [ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 (cherry picked from commit 3eb8c0b4c091da0a623ade0d3ee7aa4a93df1ea4)
In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Do not kfree() devres managed rdev Since the allocation of the drivers main structure was changed to devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling kfree() on it. This fixes things exploding if the driver probe fails and devres cleans up the rdev after we already free'd it. (cherry picked from commit 16c0681617b8a045773d4d87b6140002fa75b03b)
In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP cleanup on driver removal in error path Improve the cleanup on releasing PTP resources in error path. The error case might happen either at the driver probe and PTP feature initialization or on PTP restart (errors in reset handling, NVM update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf function) and 'ps_lock' mutex deinitialization were missed. Additionally, ptp clock was not unregistered in the latter case. Keep PTP state as 'uninitialized' on init to distinguish between error scenarios and to avoid resource release duplication at driver removal. The consequence of missing ice_ptp_cleanup_pf call is the following call trace dumped when ice_adapter object is freed (port list is not empty, as it is required at this stage): [ T93022] ------------[ cut here ]------------ [ T93022] WARNING: CPU: 10 PID: 93022 at ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice] ... [ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice] ... [ T93022] Call Trace: [ T93022] <TASK> [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? __warn.cold+0xb0/0x10e [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? report_bug+0xd8/0x150 [ T93022] ? handle_bug+0xe9/0x110 [ T93022] ? exc_invalid_op+0x17/0x70 [ T93022] ? asm_exc_invalid_op+0x1a/0x20 [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] pci_device_remove+0x42/0xb0 [ T93022] device_release_driver_internal+0x19f/0x200 [ T93022] driver_detach+0x48/0x90 [ T93022] bus_remove_driver+0x70/0xf0 [ T93022] pci_unregister_driver+0x42/0xb0 [ T93022] ice_module_exit+0x10/0xdb0 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] ... [ T93022] ---[ end trace 0000000000000000 ]--- [ T93022] ice: module unloaded
A memory leak vulnerability in the Linux kernel's ARM SCMI power domain driver was fixed. The issue occurs when of_genpd_add_provider_onecell() fails during probe, causing previously created generic power domains to not be removed. This can lead to a memory leak and potentially a kernel crash later in genpd_debug_add(). The fix adds proper error handling to release resources on failure. This vulnerability affects multiple Linux kernel versions prior to specific patched releases in the 5.15 series for Ubuntu 20.04 HWE edge kernels.
Weblate is a web based localization tool. The Create Component functionality in Weblate allows authorized users to add new translation components by specifying both a version control system and a source code repository URL to pull from. However, prior to version 5.15, the repository URL field is not validated or sanitized, allowing an attacker to supply arbitrary protocols, hostnames, and IP addresses, including localhost, internal network addresses, and local filenames. When the Mercurial version control system is selected, Weblate exposes the full server-side HTTP response for the provided URL. This effectively creates a server-side request forgery (SSRF) primitive that can probe internal services and return their contents. In addition to accessing internal HTTP endpoints, the behavior also enables local file enumeration by attempting file:// requests. While file contents may not always be returned, the application’s error messages clearly differentiate between files that exist and files that do not, revealing information about the server’s filesystem layout. In cloud environments, this behavior is particularly dangerous, as internal-only endpoints such as cloud metadata services may be accessible, potentially leading to credential disclosure and full environment compromise. This has been addressed in the Weblate 5.15 release. As a workaround, remove Mercurial from `VCS_BACKENDS`; the Git backend is not affected. The Git backend was already configured to block the file protocol and does not expose the HTTP response content in the error message.
In the Linux kernel, the following vulnerability has been resolved: platform/x86: int3472: Fix double free of GPIO device during unregister regulator_unregister() already frees the associated GPIO device. On ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to random failures when other drivers (typically Intel THC) attempt to allocate interrupts. The root cause is that the reference count of the pinctrl_intel_platform module unexpectedly drops to zero when this driver defers its probe. This behavior can also be reproduced by unloading the module directly. Fix the issue by removing the redundant release of the GPIO device during regulator unregistration.
A side-channel tracking technique leveraging WhatsApp and Signal allows an attacker to infer a target phone's device activity state (screen on/off, offline) by sending silent probe reactions to invalid message IDs and measuring delivery receipt round-trip times. This method does not generate visible notifications or messages on the victim's device, making it stealthy. Over time, attackers can profile user behavior such as when they are home, sleeping, or mobile. The attack requires the ability to send messages to the target number, which can be mitigated by restricting unknown contacts in privacy settings. Although no direct data breach occurs, this privacy-invasive tracking poses significant risks. The threat is relevant to European users given WhatsApp and Signal's widespread adoption. No known exploits in the wild exist yet, but the proof-of-concept is publicly available.
In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: always set shared->phydev for LAN8814 Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP clock gets actually set, otherwise the function will return before setting it. This is an issue as shared->phydev is unconditionally being used when IRQ is being handled, especially in lan8814_gpio_process_cap and since it was not set it will cause a NULL pointer exception and crash the kernel. So, simply always set shared->phydev to avoid the NULL pointer exception.
The Meatmeet BBQ Probe is a Bluetooth Low Energy (BLE) enabled smart BBQ thermometer device that has been demonstrated to be vulnerable to hacking, enabling the creation of a BLE-based botnet. This botnet leverages compromised BBQ probes to form a network of devices that can be remotely controlled or manipulated. The threat was recently discussed on Reddit's NetSec community and detailed on softwaresecured.com, highlighting the potential for IoT devices with BLE connectivity to be co-opted into botnets. While no known exploits are currently active in the wild, the medium severity rating reflects the risk posed by the widespread use of such consumer IoT devices and the potential for abuse in distributed denial-of-service (DDoS) attacks or other malicious activities. European organizations using or connected to these devices could face risks related to network congestion, data integrity, and unauthorized device control. Mitigation requires securing BLE communications, firmware updates, and network segmentation to prevent lateral movement. Countries with high consumer adoption of smart home and IoT devices, such as Germany, the UK, France, and the Netherlands, are more likely to be affected due to market penetration and historical targeting of IoT botnets in these regions. Given the ease of exploitation via BLE and the potential for widespread impact, the suggested severity is medium.
An issue was discovered in bridgetech probes VB220 IP Network Probe,VB120 Embedded IP + RF Probe, VB330 High-Capacity Probe, VB440 ST 2110 Production Analytics Probe, and NOMAD, firmware versions 6.5.0-9, allowing attackers to gain sensitive information such as administrator passwords via the /probe/core/setup/passwd endpoint. NOTE: the Supplier disagrees that 6.5.0-9 is affected, and instead reports that 5.6.0-3 and earlier are affected, and 5.6.0-4 (2020-09-21) and later are fixed.
In the Linux kernel, the following vulnerability has been resolved: x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP When running as an SNP or TDX guest under KVM, force the legacy PCI hole, i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC via a forced variable MTRR range. In most KVM-based setups, legacy devices such as the HPET and TPM are enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and optionally a SystemMemory descriptor for an OperationRegion, e.g. if the device needs to be accessed via a Control Method. If a SystemMemory entry is present, then the kernel's ACPI driver will auto-ioremap the region so that it can be accessed at will. However, the ACPI spec doesn't provide a way to enumerate the memory type of SystemMemory regions, i.e. there's no way to tell software that a region must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86. The dedicated device drivers however, e.g. the HPET driver and TPM driver, want to map their associated memory as UC or WC, as accessing PCI devices using WB is unsupported. On bare metal and non-CoCO, the conflicting requirements "work" as firmware configures the PCI hole (and other device memory) to be UC in the MTRRs. So even though the ACPI mappings request WB, they are forced to UC- in the kernel's tracking due to the kernel properly handling the MTRR overrides, and thus are compatible with the drivers' requested WC/UC-. With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their requested WB if the ACPI mappings are established before the dedicated driver code attempts to initialize the device. E.g. if acpi_init() runs before the corresponding device driver is probed, ACPI's WB mapping will "win", and result in the driver's ioremap() failing because the existing WB mapping isn't compatible with the requested WC/UC-. E.g. when a TPM is emulated by the hypervisor (ignoring the security implications of relying on what is allegedly an untrusted entity to store measurements), the TPM driver will request UC and fail: [ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0 [ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12 Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC). E.g. tracing mapping requests for TPM TIS yields: Mapping TPM TIS with req_type = 0 WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460 Modules linked in: CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025 RIP: 0010:memtype_reserve+0x2ab/0x460 __ioremap_caller+0x16d/0x3d0 ioremap_cache+0x17/0x30 x86_acpi_os_ioremap+0xe/0x20 acpi_os_map_iomem+0x1f3/0x240 acpi_os_map_memory+0xe/0x20 acpi_ex_system_memory_space_handler+0x273/0x440 acpi_ev_address_space_dispatch+0x176/0x4c0 acpi_ex_access_region+0x2ad/0x530 acpi_ex_field_datum_io+0xa2/0x4f0 acpi_ex_extract_from_field+0x296/0x3e0 acpi_ex_read_data_from_field+0xd1/0x460 acpi_ex_resolve_node_to_value+0x2ee/0x530 acpi_ex_resolve_to_value+0x1f2/0x540 acpi_ds_evaluate_name_path+0x11b/0x190 acpi_ds_exec_end_op+0x456/0x960 acpi_ps_parse_loop+0x27a/0xa50 acpi_ps_parse_aml+0x226/0x600 acpi_ps_execute_method+0x172/0x3e0 acpi_ns_evaluate+0x175/0x5f0 acpi_evaluate_object+0x213/0x490 acpi_evaluate_integer+0x6d/0x140 acpi_bus_get_status+0x93/0x150 acpi_add_single_object+0x43a/0x7c0 acpi_bus_check_add+0x149/0x3a0 acpi_bus_check_add_1+0x16/0x30 acpi_ns_walk_namespace+0x22c/0x360 acpi_walk_namespace+0x15c/0x170 acpi_bus_scan+0x1dd/0x200 acpi_scan_init+0xe5/0x2b0 acpi_init+0x264/0x5b0 do_one_i ---truncated---
If kdcproxy receives a request for a realm which does not have server addresses defined in its configuration, by default, it will query SRV records in the DNS zone matching the requested realm name. This creates a server-side request forgery vulnerability, since an attacker could send a request for a realm matching a DNS zone where they created SRV records pointing to arbitrary ports and hostnames (which may resolve to loopback or internal IP addresses). This vulnerability can be exploited to probe internal network topology and firewall rules, perform port scanning, and exfiltrate data. Deployments where
the "use_dns" setting is explicitly set to false are not affected.
In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix bootlog initialization ordering As soon as we queue MHI buffers to receive the bootlog from the device, we could be receiving data. Therefore all the resources needed to process that data need to be setup prior to queuing the buffers. We currently initialize some of the resources after queuing the buffers which creates a race between the probe() and any data that comes back from the device. If the uninitialized resources are accessed, we could see page faults. Fix the init ordering to close the race.
In the Linux kernel, the following vulnerability has been resolved: usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup The kthread_run() function returns error pointers so the max3421_hcd->spi_thread pointer can be either error pointers or NULL. Check for both before dereferencing it.
