The npm package new-route-matrix was found to contain malicious code. Any system with this package installed or running should be considered fully compromised. Secrets and keys stored on the affected system should be rotated immediately from a different, secure computer. Removing the package alone does not guarantee removal of all malicious software introduced by it.
The Aisuru botnet, previously known for conducting distributed denial-of-service (DDoS) attacks, has shifted its operational focus towards leveraging residential proxies. This evolution allows attackers to route malicious traffic through compromised residential IP addresses, enhancing stealth and evasion capabilities. The botnet's new use of residential proxies poses significant risks to network security, privacy, and the integrity of online services. European organizations could face increased challenges in detecting and mitigating attacks originating from legitimate residential IP ranges. The threat is assessed as high severity due to the botnet's potential to facilitate various malicious activities beyond DDoS, including credential stuffing, web scraping, and anonymized command and control communications. Mitigation requires enhanced network monitoring, anomaly detection focused on proxy traffic, and collaboration with ISPs to identify and remediate infected devices. Countries with high broadband penetration and significant residential internet usage, such as Germany, France, the UK, and the Netherlands, are likely to be most affected. The threat's shift to residential proxies complicates traditional defense mechanisms, necessitating adaptive and proactive security strategies.
This threat involves stealthy BGP route hijacking attacks that exploit vulnerabilities in Unicast Reverse Path Forwarding (uRPF) filtering, a mechanism designed to prevent IP spoofing in volumetric DDoS attacks. Attackers can manipulate routing to redirect or intercept traffic without detection, bypassing uRPF protections. Although no known exploits are currently in the wild, the technique poses a medium severity risk due to its potential to disrupt network traffic and compromise confidentiality and availability. European organizations relying on BGP and uRPF for network security, especially ISPs and large enterprises, could be impacted. Mitigation requires advanced BGP security practices beyond standard uRPF, including route validation and monitoring. Countries with significant internet infrastructure and BGP deployment, such as Germany, the UK, France, and the Netherlands, are most likely to be affected. The threat is medium severity given the complexity of exploitation and the partial mitigation offered by uRPF. Defenders should prioritize enhanced BGP security controls and continuous network monitoring to detect anomalous routing behavior.
Europol has dismantled a SIM box operation that rented out phone numbers to facilitate various cybercrime activities. SIM boxes are devices that use multiple SIM cards to route calls over the internet, often enabling fraud, spam, and evasion of telecommunication controls. This operation's takedown disrupts a critical enabler for cybercriminals who rely on rented numbers to mask their identities and conduct illicit activities. European organizations face risks from such schemes as they can be targeted by fraud, phishing, and other attacks leveraging these rented numbers. The threat is high due to the scale and sophistication of the operation, although no direct exploits or vulnerabilities are involved. Mitigation requires enhanced telecommunication monitoring, collaboration with law enforcement, and improved detection of anomalous call patterns. Countries with significant telecom infrastructure and high cybercrime activity, such as the UK, Germany, France, Italy, and the Netherlands, are most likely affected. The severity is assessed as high given the impact on confidentiality and fraud potential, ease of exploitation by criminals, and broad scope of affected telecom services. Defenders should prioritize monitoring for SIM box activity and cooperate with authorities to reduce the availability of rented numbers for cybercrime.
The following versions of Spring Cloud Gateway Server Webflux may be vulnerable to the ability to expose environment variables and system properties to attackers.
An application should be considered vulnerable when all the following are true:
* The application is using Spring Cloud Gateway Server Webflux (Spring Cloud Gateway Server WebMVC is not vulnerable).
* An admin or untrusted third party using Spring Expression Language (SpEL) to access environment variables or system properties via routes.
* An untrusted third party could create a route that uses SpEL to access environment variables or system properties if: * The Spring Cloud Gateway Server Webflux actuator web endpoint is enabled via management.endpoints.web.exposure.include=gateway and management.endpoint.gateway.enabled=trueor management.endpoint.gateway.access=unrestricte.
* The actuator endpoints are available to attackers.
* The actuator endpoints are unsecured.
Reflex is a library to build full-stack web apps in pure Python. In versions 0.5.4 through 0.8.14, the /auth-codespace endpoint automatically assigns the redirect_to query parameter value directly to client-side links without any validation and triggers automatic clicks when the page loads in a GitHub Codespaces environment. This allows attackers to redirect users to arbitrary external URLs. The vulnerable route is only registered when a Codespaces environment is detected, and the detection is controlled by environment variables. The same behavior can be activated in production if the GITHUB_CODESPACES_PORT_FORWARDING_DOMAIN environment variable is set. The vulnerability occurs because the code assigns the redirect_to query parameter directly to a.href without any validation and immediately triggers a click (automatic navigation), allowing users to be sent to arbitrary external domains. The execution condition is based on the presence of a sessionStorage flag, meaning it triggers immediately on first visits or in incognito/private browsing windows, with no server-side origin/scheme whitelist or internal path enforcement defenses in place. This issue has been patched in version 0.8.15. As a workaround, users can ensure that GITHUB_CODESPACES_PORT_FORWARDING_DOMAIN is not set in a production environment.
In the Linux kernel, the following vulnerability has been resolved: nexthop: Forbid FDB status change while nexthop is in a group The kernel forbids the creation of non-FDB nexthop groups with FDB nexthops: # ip nexthop add id 1 via 192.0.2.1 fdb # ip nexthop add id 2 group 1 Error: Non FDB nexthop group cannot have fdb nexthops. And vice versa: # ip nexthop add id 3 via 192.0.2.2 dev dummy1 # ip nexthop add id 4 group 3 fdb Error: FDB nexthop group can only have fdb nexthops. However, as long as no routes are pointing to a non-FDB nexthop group, the kernel allows changing the type of a nexthop from FDB to non-FDB and vice versa: # ip nexthop add id 5 via 192.0.2.2 dev dummy1 # ip nexthop add id 6 group 5 # ip nexthop replace id 5 via 192.0.2.2 fdb # echo $? 0 This configuration is invalid and can result in a NPD [1] since FDB nexthops are not associated with a nexthop device: # ip route add 198.51.100.1/32 nhid 6 # ping 198.51.100.1 Fix by preventing nexthop FDB status change while the nexthop is in a group: # ip nexthop add id 7 via 192.0.2.2 dev dummy1 # ip nexthop add id 8 group 7 # ip nexthop replace id 7 via 192.0.2.2 fdb Error: Cannot change nexthop FDB status while in a group. [1] BUG: kernel NULL pointer dereference, address: 00000000000003c0 [...] Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 367 Comm: ping Not tainted 6.17.0-rc6-virtme-gb65678cacc03 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:fib_lookup_good_nhc+0x1e/0x80 [...] Call Trace: <TASK> fib_table_lookup+0x541/0x650 ip_route_output_key_hash_rcu+0x2ea/0x970 ip_route_output_key_hash+0x55/0x80 __ip4_datagram_connect+0x250/0x330 udp_connect+0x2b/0x60 __sys_connect+0x9c/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0xa4/0x2a0 entry_SYSCALL_64_after_hwframe+0x4b/0x53
Astro is a web framework. Prior to version 5.14.2, Astro reflects the value in `X-Forwarded-Host` in output when using `Astro.url` without any validation. It is common for web servers such as nginx to route requests via the `Host` header, and forward on other request headers. As such as malicious request can be sent with both a `Host` header and an `X-Forwarded-Host` header where the values do not match and the `X-Forwarded-Host` header is malicious. Astro will then return the malicious value. This could result in any usages of the `Astro.url` value in code being manipulated by a request. For example if a user follows guidance and uses `Astro.url` for a canonical link the canonical link can be manipulated to another site. It is theoretically possible that the value could also be used as a login/registration or other form URL as well, resulting in potential redirecting of login credentials to a malicious party. As this is a per-request attack vector the surface area would only be to the malicious user until one considers that having a caching proxy is a common setup, in which case any page which is cached could persist the malicious value for subsequent users. Many other frameworks have an allowlist of domains to validate against, or do not have a case where the headers are reflected to avoid such issues. This could affect anyone using Astro in an on-demand/dynamic rendering mode behind a caching proxy. Version 5.14.2 contains a fix for the issue.
An Access of Uninitialized Pointer vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved with BGP sharding configured allows an attacker triggering indirect next-hop updates, along with timing outside the attacker's control, to cause rpd to crash and restart, leading to a Denial of Service (DoS).
With BGP sharding enabled, triggering route resolution of an indirect next-hop (e.g., an IGP route change over which a BGP route gets resolved), may cause rpd to crash and restart. An attacker causing continuous IGP route churn, resulting in repeated route re-resolution, will increase the likelihood of triggering this issue, leading to a potentially extended DoS condition.
This issue affects:
Junos OS:
* all versions before 21.4R3-S6,
* from 22.1 before 22.1R3-S6,
* from 22.2 before 22.2R3-S3,
* from 22.3 before 22.3R3-S3,
* from 22.4 before 22.4R3,
* from 23.2 before 23.2R2;
Junos OS Evolved:
* all versions before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-EVO,
* from 23.2 before 23.2R2-EVO.
Versions before Junos OS 21.3R1 and Junos OS Evolved 21.3R1-EVO are unaffected by this issue.
YOSHOP 2.0 allows unauthenticated information disclosure via comment-list API endpoints in the Goods module. The Comment model eagerly loads the related User model without field filtering; because User.php defines no $hidden or $visible attributes, sensitive fields (bcrypt password hash, mobile number, pay_money, expend_money.) are exposed in JSON responses. Route names vary per deployment (e.g. /api/goods.pinglun/list), but all call the same vulnerable model logic.
Marimo versions from 0.9.20 up to but not including 0.16.4 have an unauthenticated proxy vulnerability in the /mpl/<port>/<route> endpoint. This endpoint allows external attackers to access internal services and arbitrary ports on the local machine, potentially bypassing firewalls. The vulnerability can expose sensitive internal services such as old CUPS servers, phpMyAdmin, and RPCMapper, which may lead to data exposure or further compromise. A fix is available in version 0.16.4.
The LatePoint plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 5.1.94. This is due to missing nonce validation on the change_password() function of its customer_cabinet__change_password AJAX route. The plugin hooks this endpoint via wp_ajax and wp_ajax_nopriv but does not verify a nonce or user capability before resetting the user’s password. This makes it possible for unauthenticated attackers who trick a logged-in customer (or, with “WP users as customers” enabled, an administrator) into visiting a malicious link to take over their account.
The LatePoint plugin for WordPress is vulnerable to Authentication Bypass due to insufficient identity verification within the steps__load_step route of the latepoint_route_call AJAX endpoint in all versions up to, and including, 5.1.94. The endpoint reads the client-supplied customer email and related customer fields before invoking the internal login handler without verifying login status, capability checks, or a valid AJAX nonce. This makes it possible for unauthenticated attackers to log into any customer’s account.
Red Hat OpenShift Service Mesh 3.1.2, which is based on the open source Istio project, addresses a variety of problems in a microservice architecture by creating a centralized point of control in an application.
Fixes/Improvements:
* Updated to Istio version 1.26.4
Security Fix(es):
* istio-proxyv2-rhel9: Use after free in DNS cache (CVE-2025-54588)
* istio-proxyv2-rhel9: oAuth2 Filter Signout route will not clear cookies because of missing "secure;" flag (CVE-2025-55162)
A vulnerability was identified in SimStudioAI sim up to 1.0.0. This impacts an unknown function of the file apps/sim/app/api/function/execute/route.ts. The manipulation of the argument code leads to code injection. The attack is possible to be carried out remotely.
A vulnerability was determined in SimStudioAI sim up to 1.0.0. This affects an unknown function of the file apps/sim/app/api/files/parse/route.ts. Executing manipulation of the argument filePath can lead to server-side request forgery. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. This patch is called 3424a338b763115f0269b209e777608e4cd31785. Applying a patch is advised to resolve this issue.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject: don't leak dst refcount for loopback packets recent patches to add a WARN() when replacing skb dst entry found an old bug: WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline] WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline] WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234 [..] Call Trace: nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325 nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27 expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline] .. This is because blamed commit forgot about loopback packets. Such packets already have a dst_entry attached, even at PRE_ROUTING stage. Instead of checking hook just check if the skb already has a route attached to it.
MobSF is a mobile application security testing tool used. In version 4.4.0, the GET /download/ route uses string path verification via os.path.commonprefix, which allows an authenticated user to download files outside the DWD_DIR download directory from "neighboring" directories whose absolute paths begin with the same prefix as DWD_DIR (e.g., .../downloads_bak, .../downloads.old). This is a Directory Traversal (escape) leading to a data leak. This issue has been patched in version 4.4.1.
A vulnerability was found in SimStudioAI sim up to 51b1e97fa22c48d144aef75f8ca31a74ad2cfed2. This issue affects some unknown processing of the file apps/sim/app/api/proxy/image/route.ts. The manipulation results in server-side request forgery. The attack may be performed from remote. The exploit has been made public and could be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The patch is identified as 3424a338b763115f0269b209e777608e4cd31785. Applying a patch is advised to resolve this issue.
A weakness has been identified in SimStudioAI sim up to ed9b9ad83f1a7c61f4392787fb51837d34eeb0af. Affected by this issue is the function Import of the file apps/sim/app/api/files/upload/route.ts of the component HTML File Parser. Executing manipulation of the argument File can lead to unrestricted upload. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. This patch is called 45372aece5e05e04b417442417416a52e90ba174. A patch should be applied to remediate this issue.