Temporal Server compiles a Worker Controller Instance module into its Worker Service, and that module registers a compute provider named subprocess whose function is to launch a worker by running a command on the machine hosting the Worker Service. The program name and the argument vector that provider executes are taken from the compute provider configuration supplied in the caller's request rather than from operator configuration. An authenticated caller holding only a write role in a single namespace can therefore configure a worker deployment version so that the Worker Service executes a command of the caller's choosing on its own host, under the account the server process runs as. Execution is immediate rather than deferred: the configuration handler invokes every provider using the invoke strategy directly after validating the submitted specification, so no scaling decision, task arrival, or unusual request sequence is required. Because the Worker Service process holds the persistence credentials for every namespace in the cluster and the cluster's TLS material, the consequence reaches beyond the caller's namespace to the cluster as a whole. The provider is present in the official temporal-server binaries and container images for the affected releases. The only control that can keep it unreachable is the compute provider allowlist, the per-namespace dynamic configuration setting workercontroller.compute_providers.enabled, and that control does not deny by default: its default value is an unset list, and the allowlist check is skipped entirely when the value is unset, so every registered compute provider is permitted, this one included. To determine whether a deployment is affected, check the following together. The deployed Temporal Server version is 1.31.0 or later and earlier than 1.31.3. The Worker Service is running, which it is in the default service set and therefore in a stock deployment. The effective per-namespace value of workercontroller.compute_providers.enabled is either unset or contains subprocess. And authorization is configured, meaning a real authorizer and claim mapper are in place; a deployment running with no authorizer already grants every caller unrestricted access to every namespace, so it has no namespace boundary for this to cross. Note that the separate per-namespace dynamic configuration setting workercontroller.enabled does not gate the affected path. It defaults to false, and a deployment that has never set it in any namespace is still affected, which was confirmed by running an affected release with no value for that setting present anywhere in dynamic configuration. To look for a compute configuration that is already attached, call DescribeWorkerDeploymentVersion for each worker deployment version in each namespace and check whether any scaling group's compute provider type is subprocess.
CVE-2026-93963 is a medium-severity SQL injection vulnerability in itsourcecode Leave Management System version 1.0. The flaw exists in an unspecified function within the /module/department/controller.php file, where manipulation of the DEPTID argument allows remote attackers to perform SQL injection. The vulnerability has been publicly disclosed, but no known exploits are reported in the wild. No patch or remediation information is currently available.
A use-after-free vulnerability in the Linux kernel's nvme-apple driver was resolved by properly destroying the admin queue on controller removal. The admin queue was allocated but not destroyed, causing timers and workqueues to remain active on freed memory, leading to kernel oops and panic. This issue occurs only when the NVMe controller fails to initialize and is immediately removed. The flaw was fixed by unquiescing and destroying the admin queue before controller uninitialization.
Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, translateSecurityPolicyForRoute in internal/gatewayapi/securitypolicy.go dereferences a nil authorization value when a namespace-scoped tenant creates a SecurityPolicy targeting a TCPRoute and omits spec.authorization. The persistent object triggers the panic on every reconcile; recovery in message/watchutil.go keeps the process alive but unwinds the runner/runner.go handle callback, stalling controller-wide xDS and infrastructure intermediate-representation publishing until an administrator deletes the object. The data plane continues to serve the last known good configuration while publication is stalled. This issue is fixed in versions 1.7.4 and 1.8.1.
Joomla Extension - joomshaper.com - Missing Directory Confinement in Media Rename Allowing Arbitrary File Rename in SP Page Builder (Free and Pro) 4.0.0 - 6.9.0 - The media rename task applied neither of the directory boundary checks used by the folder operations in the same controller, and its validation guard required only that either a media record exist for the supplied identifier or that the supplied path be present in #__spmedia, rather than both. The identifier and the path were consequently never checked against one another, so any valid media identifier could be paired with an unrelated filesystem path, and the STR input filter left traversal sequences intact. An attacker could rename files elsewhere in the installation, including renaming configuration.php to take the site offline.
CVE-2026-84941 is an information disclosure vulnerability in the SAML Single Sign-On (SSO) feature of TP-Link Omada Software Controller for Windows. It affects versions from 0 up to but not including 6.2.14.11, including version 0. The flaw arises from insufficient validation of user-supplied SAML metadata by authenticated users with SAML configuration privileges, potentially allowing unauthorized access to sensitive information. The vulnerability has a medium severity with a CVSS 4.0 base score of 6.9. No known exploits are reported in the wild, and no official patch or remediation details are provided in the input data.
PassMark PerformanceTest before 11.1 build 1012, BurnInTest before 11.1 build 1000, and OSForensics before 11.1 build 1016 contain a privilege escalation vulnerability in DirectIo64.sys that allows local users to issue arbitrary IN and OUT instructions to any x86 I/O port due to missing allowlist or port validation on exposed IOCTLs. Attackers can obtain a device handle and write to sensitive ports including the PS/2 controller port, CPU reset ports, CMOS configuration ports, and interrupt controller ports to cause an immediate system reset or other hardware-level manipulation from a standard user account.
In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: write the feature value before executing SET_FEATURE qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits the descriptors, which makes the controller execute the command immediately. For SPINAND_SET_FEATURE the value to be written is only placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a second submission - so the chip is programmed with whatever that register happened to hold from a previous operation, and the intended value is only applied by the *next* SET_FEATURE. Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing 0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the subsequent write of 0x00 leaves it at 0x40 - every write lands one operation late. This stayed unnoticed until v6.18 added SPI-NAND OTP support together with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode, reads, and disables it again, and mtd_otp_nvmem_add() does this during MTD registration. With the off-by-one, the "disable" write actually applies the previously requested value, so CFG_OTP_ENABLE ends up set: the chip stays in OTP mode, every subsequent array read returns the OTP area instead of the array (UBI reports an empty device) and all writes fail with -EIO because the OTP area is write protected. On this board that makes the whole flash unusable and the device unbootable. Write the feature value into NAND_FLASH_FEATURES as part of the same transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the operation actually carries - the previous code dereferenced a 4-byte pointer on a one-byte buffer (spinand->scratchbuf). With this patch the flash contents read back bit-identical to a known-good dump of the same board taken under the vendor firmware (md5-verified across partitions), and writes work.
In the Linux kernel, the following vulnerability has been resolved: Input: hynitron_cstxxx - validate touch count and finger IDs The driver allocates max_touch_num input slots, which are indexed from zero through max_touch_num - 1. The current check allows a finger ID equal to max_touch_num to reach cst3xx_report_contact(). While the input core ignores out-of-range slot indices, reporting touch data without a valid slot change corrupts the touch state of the previously active slot. The touch count is read from the controller's report and is used to index the fixed-size report buffer without first checking its range. Reject counts larger than the supported number of touch slots before checking the trailing byte or parsing touch data. Reject finger IDs equal to or greater than max_touch_num, and return immediately when an invalid finger ID is encountered so that corrupt touch frames are discarded instead of reporting partial contact state. The V821 Avaota F1 board configures the vendor driver with one touch slot, so finger ID 1 is already invalid on that device.
In the Linux kernel, the following vulnerability has been resolved: ALSA: us144mkii: re-anchor capture URBs on resubmission capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
A flaw was found in the multicloud-operators-subscription component. This vulnerability allows a tenant, who has the ability to create HelmRelease custom resources (CRs), to bypass existing security controls. The system's HelmRelease controller processes Helm chart templates using its own elevated ServiceAccount privileges without proper validation. This enables the tenant to deploy arbitrary resources across the entire cluster, leading to a significant security compromise.
IBM Power Systems Firmware versions including FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 through OP940.81 (Power HMC) contain an authorization vulnerability. This flaw exists in the interface between the Baseboard Management Controller (BMC)/Flexible Service Processor (FSP) and the host system. An attacker with service account or root access to the BMC/FSP can exploit this to write arbitrary data to hardware control registers, gaining full control over the host system and all hosted partitions. The vulnerability impacts confidentiality, integrity, and availability of the affected systems. The CVSS v3.1 score is 8.1, indicating high severity. No patch or remediation information is provided in the available data.
In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path.
A flaw was found in the clusterclaims-controller component of Multicluster Engine (MCE). An authenticated tenant can exploit this vulnerability by manipulating ClusterClaim labels. This allows the tenant to force a cluster to join a ManagedClusterSet belonging to another tenant. Such unauthorized access could enable the injection of policies and workloads into other tenants' clusters.
A security flaw was found in the golang.org/x/net/html package used by the Red Hat OpenShift Workload Availability Operator. This vulnerability allows specially crafted HTML to bypass input sanitization during parsing and rendering, enabling Cross-Site Scripting (XSS) attacks. Such attacks could lead to arbitrary code execution in applications that process untrusted HTML content using the affected component without additional protections. The Node Health Check Operator, part of Red Hat OpenShift Workload Availability, deploys a controller that identifies unhealthy nodes and remediates them using various remediation providers. This vulnerability affects this operator if it processes untrusted HTML without proper sanitization or output encoding. Red Hat has issued an advisory but has not yet released a fix for this vulnerability.
A flaw was found in multicloud-integrations, a component of Red Hat Advanced Cluster Management (RHACM). This vulnerability allows an authenticated user, referred to as a tenant, to manipulate the GitOpsCluster controller. By exploiting this, a tenant can redirect sensitive spoke cluster bearer tokens from secure locations to a namespace they control. This unauthorized access to tokens can lead to the disclosure of critical information and bypass security policies within ArgoCD AppProjects.
A flaw was found in the multicloud-integrations component. The Application propagation controller processes the `ocm-managed-cluster` annotation from an Application Custom Resource (CR) without proper validation. A tenant with permissions to create Applications on the hub cluster can exploit this to target arbitrary managed clusters. This can force ArgoCD on the spoke clusters to synchronize attacker-controlled manifests, leading to arbitrary code execution or privilege escalation on those clusters.
A critical SQL injection vulnerability (CVE-2026-51775) exists in Fastadmin version 1.6.1.20250430 within the application/common/controller/Backend.php component. This flaw allows an unauthenticated attacker to execute arbitrary code remotely. The vulnerability has a CVSS 3.1 base score of 9.8, indicating high impact on confidentiality, integrity, and availability. No patch or remediation details are currently provided. There are no known exploits in the wild at this time.
A vulnerability in the ansible-collection-redhat-leapp allows an attacker with privileged write access on a managed node to manipulate Leapp report content. This manipulation can cause the Ansible controller to read and copy its own local files to the managed node during a specific remediation task, leading to information disclosure of sensitive controller-side data such as private keys or credentials. The issue has a CVSS score of 6.2 (medium severity). Red Hat has released a security update addressing this flaw in Red Hat Enterprise Linux 9.8 and related variants.