Search: 1.20.70.50
441 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Critical | 9.8 | EPSS 0.5% | Critical9.8EPSS 0.5%GCVE DatabaseCVE-2026-74723 In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | GCVE Database | ||
| High | 8.8 | EPSS 0.1% | High8.8EPSS 0.1%GCVE DatabaseCVE-2026-74702 In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 </TASK> RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward. | GCVE Database | ||
| Low | – | EPSS 0.2% | LowEPSS 0.2%GCVE DatabaseCVE-2026-74722 In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak in btrfs_do_encoded_write() Local fuzzing of 6.12.94 has found the following memory leak: Unreferenced object 0xffff888018050a80 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 10 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 10 0a 05 18 80 88 ff ff 10 0a 05 18 80 88 ff ff ................ backtrace (crc a8a6fc29): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] extent_changeset_alloc fs/btrfs/extent_io.h:207 [inline] qgroup_reserve_data+0x1c5/0x7d0 fs/btrfs/qgroup.c:4305 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Unreferenced object 0xffff888018050a00 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 0f 00 00 00 00 00 00 ................ 90 0a 05 18 80 88 ff ff 90 0a 05 18 80 88 ff ff ................ backtrace (crc cb5c9580): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] ulist_prealloc+0x9c/0x110 fs/btrfs/ulist.c:114 extent_changeset_prealloc fs/btrfs/extent_io.h:217 [inline] __set_extent_bit+0x16b/0x1a70 fs/btrfs/extent-io-tree.c:1086 set_record_extent_bits+0x50/0x90 fs/btrfs/extent-io-tree.c:1821 qgroup_reserve_data+0x274/0x7d0 fs/btrfs/qgroup.c:4312 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by freeing an extent changeset before returning from btrfs_do_encoded_write(). | GCVE Database | ||
| Medium | 5.3 | EPSS 0.3% | CVE-2026-70907Openjdk 8 · Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Medium5.3EPSS 0.3%GCVE DatabaseCVE-2026-70907 A vulnerability in the JSSE component of Oracle Java SE, Oracle GraalVM for JDK, and Oracle GraalVM Enterprise Edition allows an unauthenticated attacker with network access via TLS to cause a partial denial of service. The flaw affects multiple supported versions including Oracle Java SE 8u501, 11.0.32, 17.0.20, 21.0.12, 25.0.4, and 26.0.2, as well as specific versions of Oracle GraalVM for JDK and Enterprise Edition. The vulnerability does not impact confidentiality or integrity but affects availability. Exploitation requires supplying data to APIs in the JSSE component without using untrusted Java Web Start applications or applets. The CVSS 3.1 base score is 5.3, indicating medium severity. Fixes are available in updated versions provided by Oracle and Ubuntu security notices. | GCVE Database | ||
| Low | 3.5 | EPSS 0.3% | CVE-2026-70412Dell iDRAC9 · Remanent Data Readable After Memory Erase Low3.5EPSS 0.3%CVE Database V5CVE-2026-70412 Dell iDRAC9, versions prior to 7.20.30.50, and Dell iDRAC10, version prior to 1.20.60.50, contain a Remanent Data Readable after Memory Erase vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. | CVE Database V5 | ||
| High | 8.8 | EPSS 0.5% | High8.8EPSS 0.5%GCVE DatabaseCVE-2026-72354 In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in MFT writeback ntfs_write_mft_block() maps each $MFT record through the $MFT data runlist. For sub-folio clusters it looks up a struct runlist_element under ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn when choosing folio_sz. That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT allocation extension can merge a replacement runlist under the same lock, and ntfs_rl_realloc() can free the old backing array. If that happens between the lookup and the later folio_sz decision, writeback can dereference freed runlist storage. The buggy scenario involves two paths, with each column showing the order within that path: MFT writeback path: $MFT allocation extension: 1. Look up rl under 1. Extend the $MFT data allocation. ni->runlist.lock. 2. Publish a replacement runlist. 2. Drop ni->runlist.lock. 3. Free the old runlist array. 3. Read rl->length and rl->vcn to choose folio_sz. Compute the remaining run length while ni->runlist.lock is still held, and use that scalar after unlock. This preserves the existing folio sizing decision without carrying a borrowed runlist_element across the lock boundary. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_mft_writepages+0x1c8d/0x1fb0 kasan_report+0xe0/0x110 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ntfs_mft_writepages+0x1c8d/0x1fb0 ? __pfx_ntfs_mft_writepages+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? iput+0x92/0xa80 do_writepages+0x219/0x530 ? __pfx_do_writepages+0x10/0x10 __writeback_single_inode+0x117/0xf50 ? do_raw_spin_lock+0x130/0x270 ? __pfx_do_raw_spin_lock+0x10/0x10 ? __pfx___writeback_single_inode+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 writeback_sb_inodes+0x65b/0x1810 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? __pfx_writeback_sb_inodes+0x10/0x10 ? lock_release+0x1e0/0x280 ? _raw_spin_unlock+0x23/0x40 ? move_expired_inodes+0x2b8/0x850 __writeback_inodes_wb+0xf4/0x270 ? __pfx___writeback_inodes_wb+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_io+0x2e4/0x410 wb_writeback+0x666/0x880 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_wb_writeback+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? get_nr_dirty_inodes+0x1c/0x170 wb_workfn+0x75e/0xbb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x27/0x60 ? __pfx_wb_workfn+0x10/0x10 ? __pfx_debug_object_deactivate+0x10/0x10 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0x1e0/0x280 process_one_work+0x8d0/0x1870 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x575/0xf80 ? __pfx_worker_thread+0x10/0x10 kthread+0x2e7/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x576/0x810 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x57e/0xe10 ? __switch_to_asm+0x33/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 970: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3c/0x80 ntfs_runlists_merge+0x1212/0x3010 ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40 ntfs_mft_record_alloc+0x1ab4/0x4f10 __ntfs_create+0x680/0x2e50 ntfs_create+0x1e6/0x3a0 path_openat+0x2b55/0x3c10 do_file_open+0x1f4/0x460 do_sys_openat2+0xde/0x170 __x64_sys_openat+0x122/0x1e0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1294: kasan_save_ ---truncated--- | GCVE Database | ||
| High | 8.8 | EPSS 0.5% | High8.8EPSS 0.5%GCVE DatabaseCVE-2026-72353 In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in fallocate ntfs_attr_fallocate() allocates holes and delayed allocations inside initialized size by looking up the current runlist element under ni->runlist.lock. The returned struct runlist_element is only a borrowed pointer into ni->runlist.rl. A writer can replace and free that array after the read lock is dropped, so later reads of rl->lcn, rl->length and rl->vcn can touch freed memory. The buggy scenario involves two paths, with each column showing the order within that path: ntfs_attr_fallocate(): 1. Take ni->runlist.lock for read. 2. Get rl from ntfs_attr_find_vcn_nolock(). 3. Drop ni->runlist.lock. 4. Read rl->lcn, rl->length and rl->vcn. mmap page_mkwrite: 1. Enter ntfs_filemap_page_mkwrite(). 2. Reach __ntfs_write_iomap_begin() and ntfs_attr_map_cluster(). 3. Merge allocation state with ntfs_runlists_merge(). 4. Reallocate ni->runlist.rl in ntfs_rl_realloc(), freeing the old array. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_attr_fallocate+0xbb8/0xd00 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_attr_fallocate+0xbb8/0xd00 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_attr_fallocate+0xbb8/0xd00 kasan_report+0xe0/0x110 ? ntfs_attr_fallocate+0xbb8/0xd00 ntfs_attr_fallocate+0xbb8/0xd00 ? lock_acquire+0x2b8/0x2f0 ? __pfx_ntfs_attr_fallocate+0x10/0x10 ? 0xffffffffc0000095 ? down_write+0x10d/0x1e0 ntfs_fallocate+0x5c9/0x1d00 ? __pfx_ntfs_fallocate+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? selinux_file_permission+0x3a7/0x510 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 ? do_syscall_64+0x81/0x6a0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 410: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3f/0x110 ntfs_runlists_merge+0xaa3/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 ntfs_attr_fallocate+0x53f/0xd00 ntfs_fallocate+0x5c9/0x1d00 vfs_fallocate+0x29d/0xd30 __x64_sys_fallocate+0xc7/0x150 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 424: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x307/0x580 ntfs_rl_realloc+0x6f/0x110 ntfs_runlists_merge+0x7b1/0x3010 ntfs_attr_map_cluster+0x4e5/0xf80 __ntfs_write_iomap_begin+0x8cd/0x2280 iomap_iter+0x6de/0x11e0 iomap_page_mkwrite+0x391/0x650 ntfs_filemap_page_mkwrite+0x1ac/0x400 do_page_mkwrite+0x15c/0x280 __handle_mm_fault+0xd6d/0x1ca0 handle_mm_fault+0x19c/0x470 do_user_addr_fault+0x23b/0x9c0 exc_page_fault+0x5c/0xc0 asm_exc_page_fault+0x26/0x30 Fix this by copying the needed runlist fields while the read lock is still held and using only those scalar snapshots after unlocking. After the snapshot, ntfs_attr_map_cluster() can also find that the range is already mapped and return balloc=false. Only call ntfs_dio_zero_range() when new clusters were allocated, matching the write iomap path and preserving the zero-newly-allocated-holes behavior. | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-74547 In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-74465 In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix potential UAF on meter attach failure While attaching a newly created meter attach_meter() function makes the new meter visible to other CPUs but can still fail afterwards. On failure, it detaches the meter back and returns an error. However, this is an unexpected behavior for the ovs_meter_cmd_set() that uses a plain kfree(meter) on attach failure without waiting for RCU readers to stop using it, assuming it was never visible. This is never a problem for ovs-vswitchd as it always creates meters before creating any flows that use them. But the UAF can be triggered with a custom application using uAPI: BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653) Read of size 8 at addr ffff88810d152650 by task meter/2508 Call Trace: ovs_meter_execute (net/openvswitch/meter.c:653) do_execute_actions (net/openvswitch/actions.c:1407) ovs_execute_actions (net/openvswitch/actions.c:1584) ovs_packet_cmd_execute (net/openvswitch/datapath.c:703) ... netlink_sendmsg (af_netlink.c:1900) Allocated by task 2519: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) ovs_meter_cmd_set (net/openvswitch/meter.c:422) ... netlink_sendmsg (af_netlink.c:1900) Freed by task 2519: kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) ovs_meter_cmd_set (net/openvswitch/meter.c:479) ... netlink_sendmsg (af_netlink.c:1900) Fix that by making sure attach_meter() doesn't make the meter visible until all the checks are done and the function can't fail anymore. This also makes sure the "hash" value is calculated after the potential re-sizing of the table. Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642. EPSS 0.2%Vulnerability | GCVE Database | ||
| High | 8.8 | EPSS 0.3% | High8.8EPSS 0.3%GCVE DatabaseCVE-2026-74489 In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix tid_tx use-after-free on BA session stop ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping sta->lock: ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */ ... spin_unlock_bh(&sta->lock); if (start_txq) ieee80211_agg_start_txq(sta, tid, false); if (send_delba) ieee80211_send_delba(..., tid_tx->ndp); That read is not covered by an RCU read-side critical section, and it runs in preemptible process context: both callers hold the wiphy mutex, reaching it either from the ieee80211_ba_session_work() wiphy work or from ieee80211_sta_tear_down_BA_sessions() during station teardown. Softirqs can run in that window too, both from the local_bh_enable() that ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU callback can free tid_tx before the read. Driving the function from a test module with the grace period forced into that window, KASAN reports the read, and the free arrives on the ordinary RCU softirq path: BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400 Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10 [...] Freed by task 57: __kasan_slab_free+0x47/0x70 __rcu_free_sheaf_prepare+0x70/0x250 rcu_free_sheaf_nobarn+0x18/0x40 rcu_core+0x426/0x1310 handle_softirqs+0x144/0x590 __irq_exit_rcu+0xea/0x150 irq_exit_rcu+0x9/0x20 sysvec_apic_timer_interrupt+0x6b/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 send_delba is only set when tx_stop is set, which happens for AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown - session idle timeout, PTK rekey, suspend, HW reconfig - and not from a peer's DELBA. Read ndp into a local before the session is freed, while sta->lock is still held. tid_tx->ndp has a single writer, in ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here: both paths are serialised by the wiphy mutex, and the session is already marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only tid_tx dereference left after ieee80211_remove_tid_tx() in this function. [move/change the comment a bit to be more general not just on ndp, initialize ndp directly] EPSS 0.3%Vulnerability | GCVE Database | ||
| Critical | 9.3 | EPSS 0.1% | Critical9.3EPSS 0.1%GCVE DatabaseCVE-2026-74517 In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs Cancel (and flush) the I/O APIC's delayed EOI handling work during the "pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI broadcast will inject another IRQ if the line is asserted, i.e. will try to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs are destroyed leads to UAF if the delayed work is processed after vCPUs are destroyed. BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218 CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events kvm_ioapic_eoi_inject_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 __kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345 kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129 ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492 kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532 process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e. requires a live vCPU. Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase of VM destruction, but that gets more than a bit sketchy as KVM expects the I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization in particular has a bad habit of touching VM-scope state during vCPU destruction. E.g. attempting to free the PIC during the pre phase would lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not hard to imagine the I/O APIC having a similar flaw. EPSS 0.1%Vulnerability | GCVE Database | ||
| Medium | 2.4 | EPSS 0.2% | Medium2.4EPSS 0.2%GCVE DatabaseCVE-2026-68350 In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`. | GCVE Database | ||
| High | 5.4 | EPSS 0.2% | High5.4EPSS 0.2%GCVE DatabaseCVE-2026-68367 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: synchronize delayed set_alt with teardown The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the work is already running, mark it cancelled and let the worker own the cleanup; otherwise tcm_disable() can cancel the queued work and clean up immediately. Also serialize the final delayed-status completion with the cancellation check while holding the composite device lock. This prevents a disconnect from clearing delayed_status while the worker is about to complete the control request. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? tcm_delayed_set_alt+0x6c/0xef0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? tcm_delayed_set_alt+0x6c/0xef0 kasan_report+0xe0/0x110 ? tcm_delayed_set_alt+0x6c/0xef0 tcm_delayed_set_alt+0x6c/0xef0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? process_one_work+0x4cb/0xb90 ? rcu_is_watching+0x20/0x50 ? tcm_delayed_set_alt+0x9/0xef0 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 544: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 tcm_alloc+0x68/0x180 usb_get_function+0x36/0x60 config_usb_cfg_link+0x125/0x1b0 configfs_symlink+0x322/0x890 vfs_symlink+0xc2/0x270 filename_symlinkat+0x295/0x2f0 __x64_sys_symlinkat+0x62/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 661: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x2f9/0x530 config_usb_cfg_unlink+0x173/0x1e0 configfs_unlink+0x1fa/0x340 vfs_unlink+0x15c/0x510 filename_unlinkat+0x2ba/0x450 __x64_sys_unlinkat+0x63/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | GCVE Database | ||
| Low | – | EPSS 0.2% | LowEPSS 0.2%GCVE DatabaseCVE-2026-68150 In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all superblocks via __iterate_supers() with SUPER_ITER_EXCL, which acquires s_umount exclusively before calling the callback and releases it afterwards. However, the callback do_thaw_all_callback() calls thaw_super_locked() which unconditionally releases s_umount on every code path. This results in a second unlock attempt in __iterate_supers() that corrupts the rwsem state, triggering a DEBUG_RWSEMS warning: [ 182.601148] sysrq: Emergency Thaw of all frozen filesystems [ 182.601865] ------------[ cut here ]------------ [ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty [ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53 [ 182.604578] Modules linked in: [ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy) [ 182.605711] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1kylin1 04/01/2014 [ 182.606417] Workqueue: events do_thaw_all [ 182.606750] RIP: 0010:up_write+0xaf/0x170 [ 182.607076] Code: 19 3a 92 48 0f 44 c2 48 8b 55 08 48 8b 55 00 4c 8b 45 08 48 8b 55 00 48 8d 3d ad 91 e0 01 48 8b 4d 20 50 48 c7 c6 f0 8c 26 92 <67> 48 0f b9 3a e8 d7 93 4e 00 58 eb 81 48 83 7f 18 00 48 c7 c2 8d [ 182.608563] RSP: 0018:ffffb670001d7e08 EFLAGS: 00010246 [ 182.609007] RAX: ffffffff92349e8d RBX: 0000000000000000 RCX: ffff99b1011e5870 [ 182.609595] RDX: 0000000000000000 RSI: ffffffff92268cf0 RDI: ffffffff92914d10 [ 182.610283] RBP: ffff99b1011e5870 R08: 0000000000000000 R09: ffff99b101b06c80 [ 182.610847] R10: ffff99b10139a808 R11: fefefefefefefeff R12: 0000000000000000 [ 182.611414] R13: ffffffff90cf74d0 R14: 0000000000000000 R15: ffff99b1011e5800 [ 182.612009] FS: 0000000000000000(0000) GS:ffff99b1eaaee000(0000) knlGS:0000000000000000 [ 182.612670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 182.613146] CR2: 00000000005c631c CR3: 00000000013ee000 CR4: 00000000000006f0 [ 182.613722] Call Trace: [ 182.613946] <TASK> [ 182.614130] __iterate_supers+0x128/0x150 [ 182.614463] do_thaw_all+0x1b/0x30 [ 182.614759] process_scheduled_works+0xbb/0x3f0 [ 182.615150] ? __pfx_worker_thread+0x10/0x10 [ 182.615499] worker_thread+0x129/0x270 [ 182.615816] ? __pfx_worker_thread+0x10/0x10 [ 182.616201] kthread+0xe2/0x120 [ 182.616469] ? __pfx_kthread+0x10/0x10 [ 182.616792] ret_from_fork+0x15b/0x240 [ 182.617115] ? __pfx_kthread+0x10/0x10 [ 182.617426] ret_from_fork_asm+0x1a/0x30 [ 182.617761] </TASK> [ 182.617968] ---[ end trace 0000000000000000 ]--- [ 182.618412] Emergency Thaw complete Fix this by switching to SUPER_ITER_UNLOCKED and acquiring s_umount in the callback via super_lock_excl() before calling thaw_super_locked(). This matches the locking pattern expected by thaw_super_locked() and eliminates the double unlock. While at it, remove the dead 'return;' at the end of do_thaw_all_callback(). EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.8 | EPSS 0.2% | Medium5.8EPSS 0.2%GCVE DatabaseCVE-2026-68169 In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: userspace: fix use-after-free in get_local_id In mptcp_pm_userspace_get_local_id(), the address entry is looked up under spinlock, but its id is read after dropping the lock. A concurrent deletion can free the entry between the unlock and the read, leading to UAF. The race window is narrow. It was reproduced only with a locally constructed stress test that repeatedly overlaps an MP_JOIN SYN with a MPTCP_PM_CMD_SUBFLOW_DESTROY request. However, the KASAN report below confirms that the race is reachable: [ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0 ... [ 666.319401] Call Trace: [ 666.319405] <IRQ> [ 666.319408] dump_stack_lvl+0x53/0x70 [ 666.319412] print_address_description.constprop.0+0x2c/0x3b0 [ 666.319418] print_report+0xbe/0x2b0 [ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319423] kasan_report+0xce/0x100 [ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319429] mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319433] mptcp_pm_get_local_id+0x371/0x440 ... [ 666.319821] Allocated by task 45539: [ 666.319844] kasan_save_stack+0x33/0x60 [ 666.319855] kasan_save_track+0x14/0x30 [ 666.319858] __kasan_kmalloc+0x8f/0xa0 [ 666.319863] __kmalloc_noprof+0x1e7/0x520 [ 666.319867] sock_kmalloc+0xdf/0x130 [ 666.319885] sock_kmemdup+0x1b/0x40 [ 666.319888] mptcp_userspace_pm_append_new_local_addr+0x261/0x500 [ 666.319910] mptcp_pm_nl_announce_doit+0x16a/0x610 ... [ 666.319967] Freed by task 45560: [ 666.319988] kasan_save_stack+0x33/0x60 [ 666.319991] kasan_save_track+0x14/0x30 [ 666.319994] kasan_save_free_info+0x3b/0x60 [ 666.319998] __kasan_slab_free+0x43/0x70 [ 666.320000] kfree+0x166/0x440 [ 666.320003] sock_kfree_s+0x1d/0x50 [ 666.320007] mptcp_userspace_pm_delete_local_addr.isra.0+0x157/0x200 [ 666.320011] mptcp_pm_nl_subflow_destroy_doit+0x51d/0xea0 Fix by copying the id into a local variable while still holding the lock, and use -1 as a "not found" sentinel. | GCVE Database | ||
| Low | – | EPSS 0.2% | LowEPSS 0.2%GCVE DatabaseCVE-2026-68191 In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL pointer dereference in rhash table destroy When unbinding the ath12k driver, kernel NULL pointer dereferences occur in irq_work_sync() called from rhashtable_destroy(). Two hash tables are affected: 1. ath12k_link_sta hash table in ath12k_base 2. ath12k_dp_link_peer hash table in ath12k_dp The issue happens because the destroy functions are called unconditionally in cleanup paths, but the hash tables are only initialized late in their respective init functions. If the device was never fully started or if the init functions failed before initializing the hash tables, the pointers will be NULL. The issues are always reproducible from a VM because the MSI addressing initialization is failing. Call trace for ath12k_link_sta_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 ath12k_link_sta_rhash_tbl_destroy+0x19/0x40 [ath12k] ath12k_core_stop+0xe/0x80 [ath12k] ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k] ath12k_pci_remove+0x60/0x110 [ath12k] Call trace for ath12k_dp_link_peer_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 ath12k_dp_link_peer_rhash_tbl_destroy+0x29/0x50 [ath12k] ath12k_dp_cmn_device_deinit+0x21/0x140 [ath12k] ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k] ath12k_pci_remove+0x60/0x110 [ath12k] Fix this by adding NULL checks before calling rhashtable_destroy() in both destroy functions. The NULL check approach was chosen because the rhashtable pointer serves as the initialization state indicator. The init can fail at various points, leaving some components uninitialized. Checking the pointer directly is simpler than adding separate state flags that would need synchronization. EPSS 0.2%Vulnerability | GCVE Database | ||
| Low | 2.0 | EPSS 0.2% | Low2.0EPSS 0.2%GCVE DatabaseCVE-2026-68223 In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: Fix memory leak in error path of vdec_open The vdec_open() function previously jumped directly to err_m2m_release when vdec_init_ctrls() failed, skipping release of the m2m context. This caused a resource leak. Fix it by introducing a proper err_m2m_ctx_release label that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before releasing the m2m device. This was identified via kmemleak: unreferenced object 0xffff0000205d6878 (size 8): comm "v4l_id", pid 5289, jiffies 4294938580 hex dump (first 8 bytes): 40 d2 49 18 00 00 ff ff @.I..... backtrace (crc d3204599): kmemleak_alloc+0xc8/0xf0 __kvmalloc_node_noprof+0x60c/0x850 v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev] vdec_open+0x1f4/0x788 [meson_vdec] v4l2_open+0x144/0x460 [videodev] chrdev_open+0x1ac/0x500 do_dentry_open+0x3f0/0xfe8 vfs_open+0x68/0x320 do_open+0x2d8/0x9a8 path_openat+0x1d0/0x4f0 do_filp_open+0x190/0x380 do_sys_openat2+0xf8/0x1b0 __arm64_sys_openat+0x13c/0x1e8 invoke_syscall+0xdc/0x268 el0_svc_common.constprop.0+0x178/0x258 do_el0_svc+0x4c/0x70 EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.7 | EPSS 0.2% | Medium5.7EPSS 0.2%GCVE DatabaseCVE-2026-68239 In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Account for NULL and handle pages in ttm_pool_backup Pages in ttm_pool_backup can be NULL or backup handles (ttm_backup_page_ptr_is_handle()), neither of which can be passed to set_pages_array_wb() or freed. Add a dedicated WB pass before the dma/purge loop that walks allocations using the same i += num_pages stride, skipping NULL and handle entries, and calls set_pages_array_wb() once per contiguous run of real pages. Apply the same NULL/handle guard to the dma/purge loop. Fixes the following oops: Oops: general protection fault, kernel NULL pointer dereference 0x0: 0000 [#1] SMP NOPTI RIP: 0010:__cpa_process_fault+0xf8/0x770 RSP: 0018:ffffc90000a87718 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffffc90000a87868 RCX: 0000000000000000 RDX: 0000000000001000 RSI: 0005088000000000 RDI: ffffffff827c5f34 RBP: 0005088000000000 R08: ffffc90000a877cb R09: ffffc90000a877d0 R10: 0000000000000000 R11: 000000000000001b R12: 000ffffffffff000 R13: ffffc90000a87868 R14: ffffc90000a87868 R15: ffff88815b882ae0 FS: 0000000000000000(0000) GS:ffff8884ec840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f930b844000 CR3: 000000000262e003 CR4: 0000000008f70ef0 PKRU: 55555554 Call Trace: <TASK> __change_page_attr_set_clr+0x989/0xe90 ? __purge_vmap_area_lazy+0x6c/0x3a0 ? _vm_unmap_aliases+0x250/0x2a0 set_pages_array_wb+0x7f/0x120 ttm_pool_backup+0x4c9/0x5b0 [ttm] ? dma_resv_wait_timeout+0x3b/0xf0 ttm_tt_backup+0x32/0x60 [ttm] ttm_bo_shrink+0x66/0x110 [ttm] xe_bo_shrink_purge+0x12b/0x1b0 [xe] xe_bo_shrink+0xbb/0x270 [xe] __xe_shrinker_walk+0xf7/0x160 [xe] xe_shrinker_walk+0x9d/0xc0 [xe] xe_shrinker_scan+0x11f/0x210 [xe] do_shrink_slab+0x13b/0x270 shrink_slab+0xf1/0x400 shrink_node+0x352/0x8a0 balance_pgdat+0x32c/0x700 kswapd+0x205/0x2f0 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xd1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x1b1/0x200 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> EPSS 0.2%Vulnerability | GCVE Database | ||
| Medium | 5.7 | EPSS 0.2% | Medium5.7EPSS 0.2%GCVE DatabaseCVE-2026-68248 In the Linux kernel, the following vulnerability has been resolved: drm/i915: Return NULL on error in active_instance Avoid returning &node->base when node is NULL due to OOM during GFP_ATOMIC allocation. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 6029bc064f0b1bac184203a50fbaaf070fa18832) | GCVE Database | ||
| Medium | 6.8 | EPSS 0.2% | Medium6.8EPSS 0.2%GCVE DatabaseCVE-2026-68261 In the Linux kernel, the following vulnerability has been resolved: drm/imagination: fix error checking of pvr_vm_context_lookup() Since pvr_vm_context_lookup() returns either NULL or a pointer, then stop using IS_ERR() for checking the return value. Using IS_ERR() leads to the kernel oops reported below. It can be reproduced by passing an invalid VM context handle from userspace to the DRM_IOCTL_PVR_CREATE_CONTEXT ioctl. [ 92.733119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000148 [ 92.742042] Mem abort info: [ 92.744890] ESR = 0x0000000096000004 [ 92.748686] EC = 0x25: DABT (current EL), IL = 32 bits [ 92.754020] SET = 0, FnV = 0 [ 92.757154] EA = 0, S1PTW = 0 [ 92.760337] FSC = 0x04: level 0 translation fault [ 92.765243] Data abort info: [ 92.768129] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 92.773626] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 92.778763] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 92.784098] user pgtable: 4k pages, 48-bit VAs, pgdp=000000088ed23000 [ 92.790550] [0000000000000148] pgd=0000000000000000, p4d=0000000000000000 [ 92.797381] Internal error: Oops: 0000000096000004 [#1] SMP [ 92.803027] Modules linked in: powervr [ 92.852533] CPU: 0 UID: 0 PID: 409 Comm: triangle Not tainted 7.1.0-rc5-g98b46e693b91 #1 PREEMPT [ 92.861385] Hardware name: Texas Instruments AM68 SK (DT) [ 92.866766] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 92.873709] pc : pvr_vm_get_fw_mem_context+0x0/0xc [powervr] [ 92.879376] lr : pvr_queue_create+0x26c/0x440 [powervr] [ 92.884595] sp : ffff8000837fbb00 [ 92.887895] x29: ffff8000837fbb60 x28: 0000000000000000 x27: ffff8000837fbce8 [ 92.895015] x26: ffff000807f61a40 x25: ffff000807f61a00 x24: ffff000807f64400 [ 92.902135] x23: ffff00080a5ab000 x22: ffff800079b24730 x21: ffff000807f61800 [ 92.909254] x20: ffff00080999e680 x19: 0000000000000000 x18: 0000000000000000 [ 92.916373] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 92.923492] x14: 0000000000000000 x13: 0000000000000002 x12: ffff80008145b298 [ 92.930611] x11: ffff8000844e5000 x10: ffff80008165a130 x9 : 0000000000000100 [ 92.937730] x8 : 0000000000000001 x7 : ffff0008076b27e0 x6 : ffff00080ec43b7c [ 92.944850] x5 : ffff00080ec43b78 x4 : 0000000000000000 x3 : ffff00080999e680 [ 92.951968] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 92.959088] Call trace: [ 92.961521] pvr_vm_get_fw_mem_context+0x0/0xc [powervr] (P) [ 92.967173] pvr_context_create+0x190/0x410 [powervr] [ 92.972218] pvr_ioctl_create_context+0x44/0x8c [powervr] [ 92.977608] drm_ioctl_kernel+0xbc/0x124 [drm] [ 92.982127] drm_ioctl+0x1f8/0x4dc [drm] [ 92.986098] __arm64_sys_ioctl+0xac/0x104 [ 92.990102] invoke_syscall+0x54/0x10c [ 92.993842] el0_svc_common.constprop.0+0x40/0xe0 [ 92.998532] do_el0_svc+0x1c/0x28 [ 93.001835] el0_svc+0x38/0x11c [ 93.004969] el0t_64_sync_handler+0xa0/0xe4 [ 93.009139] el0t_64_sync+0x198/0x19c [ 93.012792] Code: aa1703e0 d2800014 95cb0ba4 17ffffe8 (f940a400) [ 93.018869] ---[ end trace 0000000000000000 ]--- EPSS 0.2%Vulnerability | GCVE Database |
Page 3 of 23