Search: time-local.com
643 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | 5.5 | EPSS <0.1% | Medium5.5EPSS <0.1%GCVE DatabaseCVE-2026-23130 In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dead lock while flushing management frames Commit [1] converted the management transmission work item into a wiphy work. Since a wiphy work can only run under wiphy lock protection, a race condition happens in below scenario: 1. a management frame is queued for transmission. 2. ath12k_mac_op_flush() gets called to flush pending frames associated with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush() the process waits for the transmission done. 3. Since wiphy lock has been taken by the flush process, the transmission work item has no chance to run, hence the dead lock. >From user view, this dead lock results in below issue: wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticated wlp8s0: associate with xxxxxx (try 1/3) wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING) ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1 The dead lock can be avoided by invoking wiphy_work_flush() to proactively run the queued work item. Note actually it is already present in ath12k_mac_op_flush(), however it does not protect the case where vif being NULL. Hence move it ahead to cover this case as well. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | GCVE Database | ||
| Medium | 4.8 | EPSS 0.2% | CVE-2026-2241janet · Out-of-bounds Read Medium4.8EPSS 0.2%CVE Database V5CVE-2026-2241 A vulnerability was found in janet-lang janet up to 1.40.1. This affects the function os_strftime of the file src/core/os.c. Performing a manipulation results in out-of-bounds read. The attack must be initiated from a local position. The exploit has been made public and could be used. The patch is named 0f285855f0e34f9183956be5f16e045f54626bff. To fix this issue, it is recommended to deploy a patch. | CVE Database V5 | ||
| Critical | 9.1 | EPSS 3.0% | CVE-2026-25643blakeblackshear frigate · OS Command Injection Critical9.1EPSS 3.0%CVE Database V5CVE-2026-25643 Frigate is a network video recorder (NVR) with realtime local object detection for IP cameras. Prior to 0.16.4, a critical Remote Command Execution (RCE) vulnerability has been identified in the Frigate integration with go2rtc. The application does not sanitize user input in the video stream configuration (config.yaml), allowing direct injection of system commands via the exec: directive. The go2rtc service executes these commands without restrictions. This vulnerability is only exploitable by an administrator or users who have exposed their Frigate install to the open internet with no authentication which allows anyone full administrative control. This vulnerability is fixed in 0.16.4. | CVE Database V5 | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-23073 A memory corruption vulnerability in the Linux kernel's RSI911x WiFi driver was fixed. The issue arises because the driver does not set the vif driver data size, leading to out-of-bounds memory access and corruption when the driver uses this data. This flaw could allow an attacker with local privileges to cause memory corruption, potentially leading to system compromise. The vulnerability affects specific linux-aws kernel versions prior to 5.15.0-1105.112~20.04.1 and related versions. A patch is available and should be applied to mitigate the risk. | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%CVE Database V5CVE-2026-24071 CVE-2026-24071 is a high-severity TOCTOU race condition vulnerability in Native Instruments' Native Access software, affecting versions up to 3.22.0. The vulnerability arises because the privileged helper's XPC service verifies client code signatures based on the client's PID, which is susceptible to PID reuse attacks. An attacker with low privileges can exploit this flaw to impersonate a trusted process, potentially gaining elevated privileges and causing full compromise of confidentiality, integrity, and availability. Exploitation requires local access and high attack complexity but does not require user interaction. No known exploits are currently in the wild. European organizations using Native Access for managing Native Instruments products are at risk, especially those in music production, audio engineering, and related creative industries. Mitigation involves applying vendor patches once available, restricting local access to trusted users, and monitoring for suspicious local IPC activity. Countries with significant creative industries and high adoption of Native Instruments software, such as Germany, the UK, France, and the Netherlands, are most likely to be affected. | CVE Database V5 | ||
| Medium | 6.2 | EPSS 0.2% | CVE-2026-1757Red Hat Hardened Images · Memory Leak Medium6.2EPSS 0.2%CVE Database V5CVE-2026-1757 A flaw was identified in the interactive shell of the xmllint utility, part of the libxml2 project, where memory allocated for user input is not properly released under certain conditions. When a user submits input consisting only of whitespace, the program skips command execution but fails to free the allocated buffer. Repeating this action causes memory to continuously accumulate. Over time, this can exhaust system memory and terminate the xmllint process, creating a denial-of-service condition on the local system. | CVE Database V5 | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-23025 In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: prevent pcp corruption with SMP=n The kernel test robot has reported: BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28 lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0 CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470 Call Trace: <IRQ> __dump_stack (lib/dump_stack.c:95) dump_stack_lvl (lib/dump_stack.c:123) dump_stack (lib/dump_stack.c:130) spin_dump (kernel/locking/spinlock_debug.c:71) do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?) _raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138) __free_frozen_pages (mm/page_alloc.c:2973) ___free_pages (mm/page_alloc.c:5295) __free_pages (mm/page_alloc.c:5334) tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290) ? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289) ? rcu_core (kernel/rcu/tree.c:?) rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861) rcu_core_si (kernel/rcu/tree.c:2879) handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623) __irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725) irq_exit_rcu (kernel/softirq.c:741) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052) </IRQ> <TASK> RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194) free_pcppages_bulk (mm/page_alloc.c:1494) drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632) __drain_all_pages (mm/page_alloc.c:2731) drain_all_pages (mm/page_alloc.c:2747) kcompactd (mm/compaction.c:3115) kthread (kernel/kthread.c:465) ? __cfi_kcompactd (mm/compaction.c:3166) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork (arch/x86/kernel/process.c:164) ? __cfi_kthread (kernel/kthread.c:412) ret_from_fork_asm (arch/x86/entry/entry_64.S:255) </TASK> Matthew has analyzed the report and identified that in drain_page_zone() we are in a section protected by spin_lock(&pcp->lock) and then get an interrupt that attempts spin_trylock() on the same lock. The code is designed to work this way without disabling IRQs and occasionally fail the trylock with a fallback. However, the SMP=n spinlock implementation assumes spin_trylock() will always succeed, and thus it's normally a no-op. Here the enabled lock debugging catches the problem, but otherwise it could cause a corruption of the pcp structure. The problem has been introduced by commit 574907741599 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme recognizes the need for disabling IRQs to prevent nesting spin_trylock() sections on SMP=n, but the need to prevent the nesting in spin_lock() has not been recognized. Fix it by introducing local wrappers that change the spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places that do spin_lock(&pcp->lock). [vbabka@suse.cz: add pcp_ prefix to the spin_lock_irqsave wrappers, per Steven] | GCVE Database | ||
| Medium | 6.7 | EPSS 0.3% | CVE-2026-25129bobthecow psysh · Uncontrolled Search Path Element Medium6.7EPSS 0.3%CVE Database V5CVE-2026-25129 PsySH is a runtime developer console, interactive debugger, and REPL for PHP. Prior to versions 0.11.23 and 0.12.19, PsySH automatically loads and executes a `.psysh.php` file from the Current Working Directory (CWD) on startup. If an attacker can write to a directory that a victim later uses as their CWD when launching PsySH, the attacker can trigger arbitrary code execution in the victim's context. When the victim runs PsySH with elevated privileges (e.g., root), this results in local privilege escalation. This is a CWD configuration poisoning issue leading to arbitrary code execution in the victim user’s context. If a privileged user (e.g., root, a CI runner, or an ops/debug account) launches PsySH with CWD set to an attacker-writable directory containing a malicious `.psysh.php`, the attacker can execute commands with that privileged user’s permissions, resulting in local privilege escalation. Downstream consumers that embed PsySH inherit this risk. For example, Laravel Tinker (`php artisan tinker`) uses PsySH. If a privileged user runs Tinker while their shell is in an attacker-writable directory, the `.psysh.php` auto-load behavior can be abused in the same way to execute attacker-controlled code under the victim’s privileges. Versions 0.11.23 and 0.12.19 patch the issue. | CVE Database V5 | ||
| High | 7.3 | EPSS 0.2% | High7.3EPSS 0.2%CVE Database V5CVE-2026-23988 CVE-2026-23988 is a high-severity TOCTOU race condition vulnerability in Rufus versions 4.11 and below. Rufus, a popular utility for creating bootable USB drives, runs with Administrator privileges but writes a PowerShell script to the user-writable %TEMP% directory without proper file locking. This allows a local attacker to replace the legitimate script with a malicious one between the write and execution steps, leading to arbitrary code execution with elevated privileges. The vulnerability requires local access and some user interaction but can result in full system compromise. It has been fixed in version 4.12_BETA. No known exploits are currently reported in the wild. European organizations using vulnerable Rufus versions on Windows systems are at risk, especially those with shared or multi-user environments. Mitigation involves upgrading Rufus to 4. | CVE Database V5 | ||
| Medium | 5.5 | EPSS 0.1% | Medium5.5EPSS 0.1%CVE Database V5CVE-2026-21912 CVE-2026-21912 is a medium severity TOCTOU race condition vulnerability in Juniper Networks Junos OS affecting MX10k Series with LC480 or LC2101 line cards. A local, low-privileged attacker can repeatedly execute the 'show system firmware' CLI command to cause the affected line cards to crash and restart, potentially leading to chassisd process crashes and core dumps. This vulnerability impacts multiple Junos OS versions prior to specific patch releases. Exploitation does not require user interaction but requires local access with low privileges. The vulnerability results in availability disruption without compromising confidentiality or integrity. No known exploits are currently in the wild. European organizations using MX10k Series routers with these line cards should prioritize patching to prevent potential denial-of-service conditions. Countries with significant Juniper infrastructure deployments and critical network backbones are at higher risk. Mitigation involves applying vendor patches once available and restricting local CLI access to trusted administrators only. | CVE Database V5 | ||
| High | 7.8 | EPSS 0.1% | High7.8EPSS 0.1%GCVE DatabaseCVE-2025-71099 In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix potential UAF in xe_oa_add_config_ioctl() In xe_oa_add_config_ioctl(), we accessed oa_config->id after dropping metrics_lock. Since this lock protects the lifetime of oa_config, an attacker could guess the id and call xe_oa_remove_config_ioctl() with perfect timing, freeing oa_config before we dereference it, leading to a potential use-after-free. Fix this by caching the id in a local variable while holding the lock. v2: (Matt A) - Dropped mutex_unlock(&oa->metrics_lock) ordering change from xe_oa_remove_config_ioctl() (cherry picked from commit 28aeaed130e8e587fd1b73b6d66ca41ccc5a1a31) | GCVE Database | ||
| High | 7.8 | EPSS 0.1% | CVE-2025-68808Linux kernel · media: vidtv: initialize local pointers upon transfer of memory ownership High7.8EPSS 0.1%GCVE DatabaseCVE-2025-68808 A use-after-free and double-free vulnerability was identified and resolved in the Linux kernel's media subsystem, specifically in the vidtv component. The issue arises because local pointers are not initialized to NULL after transferring memory ownership, leading to potential double freeing of memory. This flaw can cause system instability or crashes. The vulnerability affects specific Linux kernel versions and has a CVSS score of 7.8, indicating a high impact on confidentiality, integrity, and availability. A patch is available and has been incorporated in updated Linux kernel releases. EPSS 0.1%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2025-68822 A use-after-free vulnerability in the Linux kernel's ALPS touchpad driver (dev3_register_work) was fixed. The issue arises from a race condition during device detachment where delayed work may execute after the associated data structure has been freed. This could lead to memory corruption and potentially allow an attacker with local privileges to compromise system integrity and confidentiality. The vulnerability affects specific linux-aws kernel versions prior to 6.17.0-1012.12~24.04.1, 6.17.0-1013.13~24.04.1, 6.17.0-1018.18, 6.17.0-1020.20, and 6.17.0-22.22~24.04.1. A patch is available that properly cancels the delayed work to prevent use-after-free conditions. | GCVE Database | ||
| Medium | 5.3 | EPSS 0.1% | CVE-2026-22701tox-dev filelock · Link Following Medium5.3EPSS 0.1%CVE Database V5CVE-2026-22701 ## Vulnerability Summary **Title:** Time-of-Check-Time-of-Use (TOCTOU) Symlink Vulnerability in SoftFileLock **Affected Component:** `filelock` package - `SoftFileLock` class **File:** `src/filelock/_soft.py` lines 17-27 **CWE:** CWE-362, CWE-367, CWE-59 --- ## Description A TOCTOU race condition vulnerability exists in the `SoftFileLock` implementation of the filelock package. An attacker with local filesystem access and permission to create symlinks can exploit a race condition between the permission validation and file creation to cause lock operations to fail or behave unexpectedly. The vulnerability occurs in the `_acquire()` method between `raise_on_not_writable_file()` (permission check) and `os.open()` (file creation). During this race window, an attacker can create a symlink at the lock file path, potentially causing the lock to operate on an unintended target file or leading to denial of service. ### Attack Scenario ``` 1. Lock attempts to acquire on /tmp/app.lock 2. Permission validation passes 3. [RACE WINDOW] - Attacker creates: ln -s /tmp/important.txt /tmp/app.lock 4. os.open() tries to create lock file 5. Lock operates on attacker-controlled target file or fails ``` --- ## Impact _What kind of vulnerability is it? Who is impacted?_ This is a **Time-of-Check-Time-of-Use (TOCTOU) race condition vulnerability** affecting any application using `SoftFileLock` for inter-process synchronization. **Affected Users:** - Applications using `filelock.SoftFileLock` directly - Applications using the fallback `FileLock` on systems without `fcntl` support (e.g., GraalPy) **Consequences:** - **Silent lock acquisition failure** - applications may not detect that exclusive resource access is not guaranteed - **Denial of Service** - attacker can prevent lock file creation by maintaining symlink - **Resource serialization failures** - multiple processes may acquire "locks" simultaneously - **Unintended file operations** - lock could operate on attacker-controlled files **CVSS v4.0 Score:** 5.6 (Medium) **Vector:** CVSS:4.0/AV:L/AT:L/PR:L/UI:N/VC:N/VI:L/VA:H/SC:N/SI:N/SA:N **Attack Requirements:** - Local filesystem access to the directory containing lock files - Permission to create symlinks (standard for regular unprivileged users on Unix/Linux) - Ability to time the symlink creation during the narrow race window --- ## Patches _Has the problem been patched? What versions should users upgrade to?_ Yes, the vulnerability has been patched by adding the `O_NOFOLLOW` flag to prevent symlink following during lock file creation. **Patched Version:** Next release (commit: 255ed068bc85d1ef406e50a135e1459170dd1bf0) **Mitigation Details:** - The `O_NOFOLLOW` flag is added conditionally and gracefully degrades on platforms without support - On platforms with `O_NOFOLLOW` support (most modern systems): symlink attacks are completely prevented - On platforms without `O_NOFOLLOW` (e.g., GraalPy): TOCTOU window remains but is documented **Users should:** - Upgrade to the patched version when available - For critical deployments, consider using `UnixFileLock` or `WindowsFileLock` instead of the fallback `SoftFileLock` --- ## Workarounds _Is there a way for users to fix or remediate the vulnerability without upgrading?_ For users unable to update immediately: 1. **Avoid `SoftFileLock` in security-sensitive contexts** - use `UnixFileLock` or `WindowsFileLock` when available (these were already patched for CVE-2025-68146) 2. **Restrict filesystem permissions** - prevent untrusted users from creating symlinks in lock file directories: ```bash chmod 700 /path/to/lock/directory ``` 3. **Use process isolation** - isolate untrusted code from lock file paths to prevent symlink creation 4. **Monitor lock operations** - implement application-level checks to verify lock acquisitions are successful before proceeding with critical operations --- ## References _Are there any links users can visit to find out more?_ - **Similar Vulnerability:** CVE-2025-68146 (TOCTOU vulnerability in UnixFileLock/WindowsFileLock) - **CWE-362 (Concurrent Execution using Shared Resource):** https://cwe.mitre.org/data/definitions/362.html - **CWE-367 (Time-of-check Time-of-use Race Condition):** https://cwe.mitre.org/data/definitions/367.html - **CWE-59 (Improper Link Resolution Before File Access):** https://cwe.mitre.org/data/definitions/59.html - **O_NOFOLLOW documentation:** https://man7.org/linux/man-pages/man2/open.2.html - **GitHub Repository:** https://github.com/tox-dev/filelock --- **Reported by:** George Tsigourakos (@tsigouris007) | CVE Database V5 | ||
| Medium | 6.5 | EPSS 0.7% | CVE-2025-68280Apache SIS · XML External Entity (XXE) Medium6.5EPSS 0.7%CVE Database V5CVE-2025-68280 Improper Restriction of XML External Entity Reference vulnerability in Apache SIS. It is possible to write XML files in such a way that, when parsed by Apache SIS, an XML file reveals to the attacker the content of a local file on the server running Apache SIS. This vulnerability impacts the following SIS services: * Reading of GeoTIFF files having the GEO_METADATA tag defined by the Defense Geospatial Information Working Group (DGIWG). * Parsing of ISO 19115 metadata in XML format. * Parsing of Coordinate Reference Systems defined in the GML format. * Parsing of files in GPS Exchange Format (GPX). This issue affects Apache SIS from versions 0.4 through 1.5 inclusive. Users are recommended to upgrade to version 1.6, which will fix the issue. In the meantime, the security vulnerability can be avoided by launching Java with the javax.xml.accessExternalDTD system property sets to a comma-separated list of authorized protocols. For example: java -Djavax.xml.accessExternalDTD="" ... | CVE Database V5 | ||
| Medium | 6.9 | EPSS 0.3% | CVE-2025-15128ZKTeco BioTime · Unprotected Storage of Credentials Medium6.9EPSS 0.3%CVE Database V5CVE-2025-15128 A vulnerability was detected in ZKTeco BioTime up to 9.0.3/9.0.4/9.5.2. This affects an unknown part of the file /base/safe_setting/ of the component Endpoint. Performing a manipulation of the argument backup_encryption_password_decrypt/export_encryption_password_decrypt results in unprotected storage of credentials. Remote exploitation of the attack is possible. The exploit is now public and may be used. Upgrading to version 9.0.6 is able to mitigate this issue. It is recommended to upgrade the affected component. The vendor confirms: "The mainstream version ZKBioTime V9.0.6 has fixed this vulnerability. Please update to the latest version as soon as possible. For the Middle East version BioTime 9.5.X, you can contact the local technical support to obtain the fix package." | CVE Database V5 | ||
| High | 8.5 | EPSS 0.1% | High8.5EPSS 0.1%CVE Database V5CVE-2025-34290 Versa SASE Client for Windows versions released between 7.8.7 and 7.9.4 contain a local privilege escalation vulnerability in the audit log export functionality. The client communicates user-controlled file paths to a privileged service, which performs file system operations without impersonating the requesting user. Due to improper privilege handling and a time-of-check time-of-use race condition combined with symbolic link and mount point manipulation, a local authenticated attacker can coerce the service into deleting arbitrary directories with SYSTEM privileges. This can be exploited to delete protected system folders such as C:\\Config.msi and subsequently achieve execution as NT AUTHORITY\\SYSTEM via MSI rollback techniques. | CVE Database V5 | ||
| High | 7.3 | EPSS 0.3% | CVE-2025-68429storybookjs storybook · Information Exposure High7.3EPSS 0.3%CVE Database V5CVE-2025-68429 Storybook is a frontend workshop for building user interface components and pages in isolation. A vulnerability present starting in versions 7.0.0 and prior to versions 7.6.21, 8.6.15, 9.1.17, and 10.1.10 relates to Storybook’s handling of environment variables defined in a `.env` file, which could, in specific circumstances, lead to those variables being unexpectedly bundled into the artifacts created by the `storybook build` command. When a built Storybook is published to the web, the bundle’s source is viewable, thus potentially exposing those variables to anyone with access. For a project to potentially be vulnerable to this issue, it must build the Storybook (i.e.run `storybook build` directly or indirectly) in a directory that contains a `.env` file (including variants like `.env.local`) and publish the built Storybook to the web. Storybooks built without a `.env` file at build time are not affected, including common CI-based builds where secrets are provided via platform environment variables rather than `.env` files. Storybook runtime environments (i.e. `storybook dev`) are not affected. Deployed applications that share a repo with your Storybook are not affected. Users should upgrade their Storybook—on both their local machines and CI environment—to version .6.21, 8.6.15, 9.1.17, or 10.1.10 as soon as possible. Maintainers additionally recommend that users audit for any sensitive secrets provided via `.env` files and rotate those keys. Some projects may have been relying on the undocumented behavior at the heart of this issue and will need to change how they reference environment variables after this update. If a project can no longer read necessary environmental variable values, either prefix the variables with `STORYBOOK_` or use the `env` property in Storybook’s configuration to manually specify values. In either case, do not include sensitive secrets as they will be included in the built bundle. | CVE Database V5 | ||
| Medium | 6.3 | EPSS 0.2% | Medium6.3EPSS 0.2%CVE Database V5CVE-2025-68146 filelock is a platform-independent file lock for Python. In versions prior to 3.20.1, a Time-of-Check-Time-of-Use (TOCTOU) race condition allows local attackers to corrupt or truncate arbitrary user files through symlink attacks. The vulnerability exists in both Unix and Windows lock file creation where filelock checks if a file exists before opening it with O_TRUNC. An attacker can create a symlink pointing to a victim file in the time gap between the check and open, causing os.open() to follow the symlink and truncate the target file. All users of filelock on Unix, Linux, macOS, and Windows systems are impacted. The vulnerability cascades to dependent libraries. The attack requires local filesystem access and ability to create symlinks (standard user permissions on Unix; Developer Mode on Windows 10+). Exploitation succeeds within 1-3 attempts when lock file paths are predictable. The issue is fixed in version 3.20.1. If immediate upgrade is not possible, use SoftFileLock instead of UnixFileLock/WindowsFileLock (note: different locking semantics, may not be suitable for all use cases); ensure lock file directories have restrictive permissions (chmod 0700) to prevent untrusted users from creating symlinks; and/or monitor lock file directories for suspicious symlinks before running trusted applications. These workarounds provide only partial mitigation. The race condition remains exploitable. Upgrading to version 3.20.1 is strongly recommended. | CVE Database V5 |
Page 32 of 39 · 1 duplicate CVE record merged