Search: 1.20.70.50
441 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | 6.3 | EPSS 0.5% | CVE-2026-42792Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement update Medium6.3EPSS 0.5%GCVE DatabaseCVE-2026-42792 Improper Handling of Exceptional Conditions vulnerability in Erlang OTP erts (epmd) allows an unauthenticated remote attacker to permanently terminate the Erlang Port Mapper Daemon (epmd) via connection slot exhaustion. The do_accept function in erts/epmd/src/epmd_srv.c calls epmd_cleanup_exit() when accept(2) returns EMFILE (per-process file descriptor limit reached) or ENFILE (system-wide file descriptor limit reached), rather than treating these as recoverable conditions. An attacker can exhaust epmd's file descriptor slots by holding many TCP connections open while periodically sending a single byte to reset the idle timeout, then causing accept(2) to return EMFILE, which kills the daemon. epmd has no per-source-IP connection cap, making the attack feasible from a single source. On Debian/Ubuntu default packaging the impact is amplified: the systemd unit inherits a low file descriptor soft limit, and repeated daemon deaths trigger systemd's start-rate-limit, permanently failing both epmd.service and epmd.socket and requiring manual operator intervention to recover. This issue affects OTP from OTP 17.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15. | GCVE Database | ||
| High | 8.7 | EPSS 0.3% | CVE-2026-59251Erlang OTP · Unthrottled Resource Allocation High8.7EPSS 0.3%CVE Database V5CVE-2026-59251 Allocation of resources without limits in Erlang/OTP public_key certificate path validation allows a remote unauthenticated attacker to cause denial of service by sending a crafted X.509 certificate chain during the TLS handshake. During RFC 5280 policy processing in public_key:pkix_path_validation/3, the certificate policy tree maintained by pubkey_policy_tree grows without an upper bound. When a certificate chain contains M policies per certificate and K certificates, the tree grows on the order of M^K nodes because pubkey_policy_tree:add_leaves/2 and pubkey_policy_tree:add_leaf_siblings/2 extend the tree per policy per certificate. A modest chain with many policies per certificate is enough to pin BEAM schedulers and exhaust the node's memory, taking down the entire VM. The attacker only needs to be able to present a certificate chain to the victim, which is the normal precondition for a TLS handshake, so exploitation succeeds against any incoming or outgoing TLS connection that validates the peer's chain (the default for SSL/TLS clients and mutual-TLS servers). This is the same vulnerability class as OpenSSL's X509_verify_cert policy tree DoS. This vulnerability is associated with program files lib/public_key/src/pubkey_policy_tree.erl and program routines pubkey_policy_tree:add_leaves/2 and pubkey_policy_tree:add_leaf_siblings/2. This issue affects OTP from OTP 26.2 before OTP 27.3.4.15, OTP 28.5.0.4, and OTP 29.0.4, corresponding to public_key from 1.15 before 1.17.1.5, 1.20.3.4, and 1.21.4. | CVE Database V5 | ||
| Medium | 5.3 | EPSS 0.3% | CVE-2026-46917Red Hat Security Advisory: Red Hat Hardened Images RPMs bug fix and enhancement update Medium5.3EPSS 0.3%GCVE DatabaseCVE-2026-46917 Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JSSE). Supported versions that are affected are Oracle Java SE: 8u501, 11.0.32, 17.0.20, 21.0.12, 25.0.4, 26.0.2; Oracle GraalVM for JDK: 17.0.20 and 21.0.12; Oracle GraalVM Enterprise Edition: 21.3.19. Easily exploitable vulnerability allows unauthenticated attacker with network access via TLS to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). | GCVE Database | ||
| Medium | 5.5 | EPSS 0.1% | CVE-2026-64214Linux kernel · powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise() Medium5.5EPSS 0.1%GCVE DatabaseCVE-2026-64214 In the Linux kernel, the following vulnerability has been resolved: powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise() A kernel panic is observed when handling machine check exceptions from real mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0 The crash occurs because arch_irq_work_raise() calls preempt_disable() from machine check exception (MCE) handlers running in real mode. In this context, accessing the preempt_count can fault, leading to the panic. The preempt_disable()/preempt_enable() pair in arch_irq_work_raise() was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") to avoid races while raising irq work from exception context. Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when queueing work on the local CPU") added preemption protection in irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per cpu atomics instead of regular atomics") added equivalent protection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise() As a result, callers other than mce_irq_work_raise() already execute with preemption disabled, making the additional preempt_disable()/preempt_enable() pair in arch_irq_work_raise() redundant. The arch_irq_work_raise() function executes in NMI context when called from MCE handler. Hence we will not be preempted or scheduled out since we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove the preempt_disable()/preempt_enable() calls from here. Remove it to avoid accessing preempt_count from real mode context. [Maddy: Fixed the commit title] EPSS 0.1%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-64346 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode [39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c [39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664 Fix this by ensuring the udc structure remains allocated until the gadget is released. To achieve this, introduce a new usb_gadget_release() routine to the core. When the gadget is added, usb_add_gadget() stores the gadget's release routine in the udc structure and takes a reference to the udc. When the gadget is released, usb_gadget_release() drops the reference to the udc and then calls the gadget's release routine. | GCVE Database | ||
| High | 7.1 | EPSS 0.1% | High7.1EPSS 0.1%GCVE DatabaseCVE-2026-64436 In the Linux kernel, the following vulnerability has been resolved: net: af_key: initialize alg_key_len for IPComp states pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches. | GCVE Database | ||
| High | 8.2 | EPSS 0.5% | CVE-2026-64448Linux kernel · smb: client: restrict implied bcc[0] exemption to responses without data area High8.2EPSS 0.5%GCVE DatabaseCVE-2026-64448 In the Linux kernel, the following vulnerability has been resolved: smb: client: restrict implied bcc[0] exemption to responses without data area smb2_check_message() has a long-standing quirk that accepts a response whose calculated length is one byte larger than the bytes actually received ("server can return one byte more due to implied bcc[0]"). This was introduced to accommodate servers that omit the trailing bcc[0] overlap byte when no data area is present. However, the exemption is applied unconditionally, regardless of whether the command actually carries a data area (has_smb2_data_area[]). When a response with a data area is subject to the +1 exemption, the reported data can extend one byte beyond the bytes actually received, yet smb2_check_message() still accepts it. The subsequent decoder then reads past the end of the receive buffer. This is reachable during NEGOTIATE and SESSION_SETUP, before the session is established. The resulting out-of-bounds reads are visible under KASAN when mounting against a non-conforming server; both the SPNEGO/negTokenInit and the NTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: <TASK> dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448 Restrict the +1 exemption to responses that have no data area, so that it still covers the bcc[0] omission it was meant for. When a data area is present, the +1 discrepancy instead means the reported data length overruns the ---truncated--- | GCVE Database | ||
| Medium | 5.5 | EPSS <0.1% | CVE-2026-64415Linux kernel · mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup Medium5.5EPSS <0.1%GCVE DatabaseCVE-2026-64415 In the Linux kernel, the following vulnerability has been resolved: mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup We hit a real softlockup in an internal stress test environment. The workload was LTP memory/swap stress on a large arm64 machine, with 320 CPUs, about 1TB memory and an 8.6GB swap device. The system was under heavy load and the swap device had a large number of full clusters. The softlockup was triggered during a stress test after about 3 days. So, add periodic cond_resched() calls during large full_clusters reclaim operations to prevent softlockup issues. Detailed call trace as follow: PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7" #0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4 #1 [ffff800080183d90] panic at ffffa4c1360d5e9c #2 [ffff800080183e20] watchdog_timer_fn at ffffa4c136231fa8 ... #16 [ffff8000c4ad3cb0] swap_cache_del_folio at ffffa4c1363e1614 #17 [ffff8000c4ad3ce0] __try_to_reclaim_swap at ffffa4c1363e4bfc #18 [ffff8000c4ad3d40] swap_reclaim_full_clusters at ffffa4c1363e5474 #19 [ffff8000c4ad3da0] swap_reclaim_work at ffffa4c1363e550c #20 [ffff8000c4ad3dc0] process_one_work at ffffa4c136102edc #21 [ffff8000c4ad3e10] worker_thread at ffffa4c136103398 #22 [ffff8000c4ad3e70] kthread at ffffa4c13610d95c | GCVE Database | ||
| High | 7.8 | EPSS 0.1% | High7.8EPSS 0.1%GCVE DatabaseCVE-2026-64433 In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete add_device_complete() runs from the hci_cmd_sync_work kworker, which holds only hci_req_sync_lock and *not* hci_dev_lock. It calls hci_conn_params_lookup() and then dereferences the returned object (params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0); hci_conn_params_lookup() walks hdev->le_conn_params and is documented to require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE (remove_device()), which does run under hci_dev_lock, can call hci_conn_params_free() to list_del() and kfree() the very object the lookup returned, so the subsequent params->flags read touches freed memory [0]. Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of params->flags (and the matching event emission) so the lookup result cannot be freed by a concurrent remove_device() before it is used, honouring the locking contract of hci_conn_params_lookup(). [0]: (trailing page/memory-state dump trimmed) BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388 CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT Hardware name: linux,dummy-virt (DT) Workqueue: hci0 hci_cmd_sync_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x118/0x5d8 mm/kasan/report.c:482 kasan_report+0xb0/0xf4 mm/kasan/report.c:595 __asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378 add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334 process_one_work+0x628/0xd38 kernel/workqueue.c:3289 process_scheduled_works kernel/workqueue.c:3372 [inline] worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453 kthread+0x39c/0x444 kernel/kthread.c:436 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Allocated by task 3401: kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57 kasan_save_track+0x20/0x3c mm/kasan/common.c:78 kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279 hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline] add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755 hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline] hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe0/0x128 net/socket.c:742 sock_write_iter+0x250/0x390 net/socket.c:1195 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x66c/0xab0 fs/read_write.c:688 ksys_write+0x1fc/0x24c fs/read_write.c:740 __do_sys_write fs/read_write.c:751 [inline] __se_sys_write fs/read_write.c:748 [inline] __arm64_sys_write+0x70/0xa4 fs/read_write.c:748 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151 el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724 el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596 Freed by task 3740: kasan_save_stack+0x3c/0x64 ---truncated--- | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-64453 In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | GCVE Database | ||
| High | 8.4 | EPSS 0.2% | High8.4EPSS 0.2%GCVE DatabaseCVE-2026-64247 In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Bound the bank index when querying sparse banks When checking if a VP ID is included in a sparse bank set, explicitly check that the ID can actually be contained in a sparse bank (the TLFS allows for a maximum of 64 banks of 64 vCPUs each). When handling a paravirtual TLB flush for L2, the VP ID is copied verbatim from the enlightened VMCS, without any bounds check, i.e. isn't guaranteed to be under the limit of 4096. Failure to check the bounds of the VP ID leads to an out-of-bounds read when testing the sparse bank, and super strictly speaking could lead to KVM performing an unnecessary TLB flush for an L2 vCPU. ================================================================== BUG: KASAN: use-after-free in hv_is_vp_in_sparse_set+0x85/0x100 [kvm] Read of size 8 at addr ffff88811ba5f598 by task hyperv_evmcs/2802 CPU: 12 UID: 1000 PID: 2802 Comm: hyperv_evmcs Not tainted 7.1.0-rc2 #7 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5d0 kasan_report+0xb4/0xe0 kasan_check_range+0x35/0x1b0 hv_is_vp_in_sparse_set+0x85/0x100 [kvm] kvm_hv_flush_tlb+0xe9e/0x16c0 [kvm] kvm_hv_hypercall+0xe6b/0x1e60 [kvm] vmx_handle_exit+0x485/0x1b60 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x22e3/0x5070 [kvm] kvm_vcpu_ioctl+0x5d0/0x10c0 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0xb9/0xcf0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f0e62d1a9bf </TASK> The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffffffffffffffff pfn:0x11ba5f flags: 0x4000000000000000(zone=1) raw: 4000000000000000 0000000000000000 00000000ffffffff 0000000000000000 raw: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88811ba5f480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88811ba5f580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88811ba5f600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88811ba5f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Opportunistically add a compile time assertion to ensure the maximum number of sparse banks exactly matches the number of possible bits in the passed in mask. [sean: add KASAN splat, drop comment, add assert, massage changelog] | GCVE Database | ||
| Medium | 5.5 | EPSS 0.1% | CVE-2026-64254Linux kernel · NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR Medium5.5EPSS 0.1%GCVE DatabaseCVE-2026-64254 In the Linux kernel, the following vulnerability has been resolved: NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown path ends up calling pci_iounmap() on the same iomem with some offset, which is unnecessary and triggers a kernel warning like the following: Trying to vunmap() nonexistent vm area (0000000069a5ffe8) WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937 [...] Call trace: vunmap+0x58/0x68 (P) iounmap+0x34/0x48 pci_iounmap+0x2c/0x40 ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf] pci_device_remove+0x48/0xf8 device_remove+0x50/0x88 device_release_driver_internal+0x1c8/0x228 driver_detach+0x50/0xb0 bus_remove_driver+0x74/0x100 driver_unregister+0x34/0x68 pci_unregister_driver+0x34/0xa0 ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf] [...] Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars. | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2026-64250 In the Linux kernel, the following vulnerability has been resolved: LoongArch: Report dying CPU to RCU in stop_this_cpu() This is a port of MIPS commit 9f3f3bdc6d9dac1 ("MIPS: smp: report dying CPU to RCU in stop_this_cpu()"). smp_send_stop() parks all secondary CPUs in stop_this_cpu(). And the function marks the CPU offline for the scheduler via set_cpu_online(false) but never informs RCU, so RCU keeps expecting a quiescent state from CPUs that are now spinning forever with interrupts disabled. As long as nothing waits for an RCU grace period after smp_send_stop() this is harmless, which is why it went unnoticed. However, since commit 91840be8f710370 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT"), irq_work_sync() calls synchronize_rcu() on architectures without an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns false. Any irq_work_sync() issued in the reboot/shutdown/halt path after smp_send_stop() then blocks on a grace period that can never complete, hanging the reboot: WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on ... rcu: INFO: rcu_sched detected stalls on CPUs/tasks: rcu: Offline CPU 1 blocking current GP. rcu: Offline CPU 2 blocking current GP. rcu: Offline CPU 3 blocking current GP. This issue needs some hacks to reproduce, and it was not noticed on LoongArch because arch_irq_work_has_interrupt() usually returns true. Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs and grace periods can still complete. LoongArch shuts down all CPUs here without going through the CPU-hotplug mechanism, so this report is not otherwise issued. | GCVE Database | ||
| Medium | – | MediumCisco Talos Welcome to this week’s edition of the Threat Source newsletter. Lately I've found myself thinking a lot about the Australian TV series Mr. Inbetween (IMDb 8.7/10) — not because I'm a hitman for hire, but because I literally feel in-between. Specifically, in-between what I'd call the "pre-Mythos" and “post-Mythos” eras. We've crossed a capability threshold, and it's not just one model family driving that — Codex 5.3 and GPT-5.5 deliver comparable or better performance , and Tulongfeng or GLM-5.2 (an incredibly powerful open-weight model, MIT-licensed) show the frontier isn't limited to closed models anymore. On the other side of that line, real-world impact hasn't caught up yet and we're living in an artificial buffer zone. For me, defining the “pre-” and “post-” status comes down to the gap between "vulnerability discovery" and "vulnerability publication." Last week’s Patch Tuesday gave a signal of change, as Joe pointed out , so maybe the buffer zone has come to an end. Let's dive into the 2026 Q2 stats. As in past years, we're seeing a steeper curve than the year before — a solid 49% YoY growth, though still not the hockey-stick moment I keep waiting for. By the end of June we were tracking close to 200 CVEs per day. Using the keyword methodology described here , I found 452 AI-related CVEs this calendar year. If "openclaw" is added to the keyword list, that number jumps by another 536 — a reminder that these counts are sensitive to keyword drift. Given how much the keyword list keeps changing, I'm reconsidering whether to keep publishing this particular metric going forward. KEVs, by contrast, "only" grew 13% — a small April spike aside, it's fairly flat relative to total CVE growth. Networking-gear-related CVEs continued their climb, now accounting for 24% of KEV-related vulnerabilities (up from 20% in Q1) — consistent with the trend I flagged last quarters. As in previous quarters, CVEs from 2024 or earlier still make up about 24% of everything we're tracking. More strikingly, even though the standard enterprise patch cycle is described to run 30–90 days, 181 days into 2026, 46% of today's actively-exploited (KEV) CVEs still trace back to 2025 or earlier. Old vulnerabilities don't retire, new ones keep arriving, and machine-speed vulnerability discovery is going to keep outpacing human-speed patching. Which brings me back — once again — to EPSS as a tool for prioritizing patching against this dataset. If you patched purely by CVSS 9+, you'd be urgently chasing ~3,700 CVEs — but 95% of those sit below 5% EPSS, meaning the real-world odds of exploitation are tiny. Of the 32 CVSS 9+ CVEs with EPSS ≥ 50%, 25 are already on CISA's KEV list. The remaining seven outliers are still high-probability by EPSS but haven't made KEV yet — worth watching. Ray Shoesmith (Mr. Inbetween) once told his therapist, "You know, if I hit somebody, I generally got a pretty good reason." Same principle applies to patching. Don't swing at everything — swing at what you have good reason to believe is coming for you. The one big thing Cisco Talos has discovered "msaRAT," a new Rust-based remote access trojan (RAT) deployed by the Chaos ransomware group. Built on the Tokio asynchronous runtime, it establishes a covert command-and-control (C2) channel by hijacking Chrome or Edge browsers via the Chrome DevTools Protocol (CDP). The infection starts with a deceptive MSI file masquerading as a Windows update that loads the payload directly into memory, paving the way for ransomware deployment. Why do I care? This RAT is a master of evasion, living off the browser to build its C2 infrastructure without ever directly touching the network. By routing traffic through legitimate browser processes and trusted services, msaRAT easily bypasses traditional network-based detections. Additionally, its use of the Tokio runtime enables highly efficient, parallel execution of malicious tasks, accelerating the attacker's ability to establish persistence and deploy doubl… | Cisco Talos | |||
| High | 7.5 | EPSS 0.5% | CVE-2026-11622ISC BIND 9 · Unthrottled Resource Allocation High7.5EPSS 0.5%CVE Database V5CVE-2026-11622 A DNSSEC validating resolver that is under a random subdomain attack against a DNSSEC-signed zone can suffer from runaway memory usage. The attacker needs to be able to send queries faster than the resolver can perform validation. The increased memory usage can be orders of magnitude beyond the limit configured in the `max-cache-size` parameter. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. | CVE Database V5 | ||
| High | 7.4 | EPSS 0.2% | CVE-2026-47050virtualbox High7.4EPSS 0.2%GCVE DatabaseCVE-2026-47050 CVE-2026-47050 is a vulnerability in Oracle VM VirtualBox version 7.2.8 that allows a highly privileged local attacker, requiring user interaction, to compromise the product. Exploitation can lead to unauthorized modification or deletion of critical data and cause denial of service through crashes. The vulnerability affects multiple specific older versions of VirtualBox. The CVSS 3.1 base score is 7.4, indicating medium severity. | GCVE Database | ||
| Medium | 5.5 | EPSS 0.1% | CVE-2026-64164Linux kernel · btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() Medium5.5EPSS 0.1%GCVE DatabaseCVE-2026-64164 In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io [53.988] preempt_count: 2, expected: 0 [53.967] RCU nest depth: 0, expected: 0 [53.943] Preemption disabled at: [53.944] [<0000000000000000>] 0x0 [54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full) [54.070] Tainted: [W]=WARN [54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [54.072] Call Trace: [54.074] <TASK> [54.076] dump_stack_lvl+0x56/0x80 [54.079] __might_resched.cold+0xd6/0x10f [54.072] dput.part.0+0x24/0x110 [54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs] [54.089] btrfs_sync_file+0x1ed/0x530 [btrfs] [54.087] ? __handle_mm_fault+0x8ae/0xed0 [54.089] btrfs_do_write_iter+0x172/0x210 [btrfs] [54.091] vfs_write+0x21f/0x450 [54.094] __x64_sys_pwrite64+0x8d/0xc0 [54.096] ? do_user_addr_fault+0x20c/0x670 [54.099] do_syscall_64+0x60/0xf20 [54.092] ? clear_bhb_loop+0x60/0xb0 [54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e So stop using dget_parent() and dput() and access the parent dentry directly as dentry->d_parent. This is also what ext4 is doing in its equivalent trace event ext4_sync_file_enter(). EPSS 0.1%Vulnerability | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-63884 In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential UAF in TTM object purge TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(), move casting it to an i915_tt object later to actually get the right pointer. A user reported hitting the following bug under heavy use on DG2: [26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI [26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy) [26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025 [26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915] [26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78 [26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282 [26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000 [26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff [26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000 [26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0 [26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0 [26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000 [26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0 [26620.095612] PKRU: 55555554 [26620.095612] Call Trace: [26620.095615] <TASK> [26620.095615] i915_ttm_move+0x2b9/0x420 [i915] [26620.095642] ? ttm_tt_init+0x65/0x80 [ttm] [26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915] [26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm] [26620.095669] ttm_bo_evict+0x100/0x150 [ttm] [26620.095671] ? preempt_count_add+0x64/0xa0 [26620.095673] ? _raw_spin_lock+0xe/0x30 [26620.095675] ? _raw_spin_unlock+0xd/0x30 [26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915] [26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm] [26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm] [26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm] [26620.095709] ? init_object+0x62/0xd0 [26620.095712] ttm_bo_validate+0x7a/0x180 [ttm] [26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915] [26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915] [26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095786] ? alloc_debug_processing+0xd0/0x100 [26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915] [26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915] [26620.095848] i915_vma_pin_ww+0x706/0x980 [i915] [26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915] [26620.095904] eb_validate_vmas+0x170/0xa00 [i915] [26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915] [26620.095953] ? alloc_debug_processing+0xd0/0x100 [26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30 [26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.095977] ? __wake_up_sync_key+0x32/0x50 [26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915] [26620.096001] ? __slab_alloc.isra.0+0x67/0xc0 [26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915] Results from decode_stacktrace.sh pointed to dereference of a file pointer field of a i915 TTM page vector container associated with an object being purged on eviction. That path is taken when the object is marked as no longer needed. Code analysis revealed a possibility of the i915 TTM page vector container being replaced with a new instance inside a function that purges content of the object, should it be still busy. That function is called, indirectly via a more general function that changes the object's placement and caching policy, ---truncated--- | GCVE Database | ||
| High | 8.8 | EPSS 0.2% | High8.8EPSS 0.2%GCVE DatabaseCVE-2026-63832 In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: add wcid publish check in mt76_sta_add Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add to avoid reinitializing the wcid->poll_list. Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4. According to the corruption information, prev->next was changed to itself. wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2 wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b) wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3) slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192 list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040). mt76_wcid_add_poll+0x95/0xd0 [mt76] mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common] mt7925_rx_check+0xa7/0xc0 [mt7925_common] mt76_dma_rx_poll+0x50d/0x790 [mt76] mt792x_poll_rx+0x52/0xe0 [mt792x_lib] | GCVE Database | ||
| Medium | 5.7 | EPSS 0.6% | Medium5.7EPSS 0.6%CVE Database V5CVE-2026-15007 A denial of service vulnerability was identified in GitHub Enterprise Server that allowed an authenticated user to cause service disruption by supplying a repository release notes configuration file containing deeply nested YAML. When release notes were generated, the configuration file was parsed without a nesting depth limit, causing excessive resource consumption that could render the instance unresponsive. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.17.18, 3.18.12, 3.19.9, 3.20.5, and 3.21.3. This vulnerability was reported via the GitHub Bug Bounty program. | CVE Database V5 |
Page 5 of 23