In Eclipse Arrowhead versions from 5.0.0 to 5.2.1 when the MQTT API is enabled with the certificate authentication policy, CertificateMqttFilter parses an X.509 certificate that the client sends inside the MQTT message payload (the authentication field of MqttRequestTemplate) and treats its Subject DN as the authenticated identity. The certificate is decoded with CertificateFactory.generateCertificate() but its signature is never verified and its issuer chain is never validated against any trust store. Authorisation is reduced to two string comparisons on attacker-supplied data: the DN-qualifier must equal "sy" or "op", and the cloud-name part of the CN must match the server's. Both values are public (the cloud name is in the server's own TLS certificate). An attacker who can publish to the MQTT broker can therefore mint a self-signed certificate with CN=Sysop.<cloud>.<org>.arrowhead.eu, dnQualifier=op, send it as the authentication field, and be authenticated as the cloud's system operator with isSysOp == true. This passes the downstream ManagementServiceMqttFilter (request.isSysOp() → allowed) and gives full management access over MQTT. The HTTP CertificateFilter is not affected — it reads the certificate from jakarta.servlet.request.X509Certificate, which Tomcat populates only after a successful mTLS handshake against the configured trust store.
A vulnerability in Hickory net versions 0.26.0 up to but not including 0.26.2 allows an off-path attacker to cause DNS lookups to fail by sending a single spoofed malformed UDP datagram. The client improperly parses every incoming datagram from the name server before verifying the message ID, causing the lookup to abort on parsing failure. This issue is fixed in version 0.26.2.
### Summary
httpcore2 does not start TLS for `wss://` connections routed through a SOCKS5 proxy. The WebSocket opening handshake and all subsequent frames are sent in plaintext through the proxy path, despite the caller selecting the secure `wss` scheme.
The transport flaw affects httpcore2 releases before `2.10.0`. HTTPX2 exposed this behavior through its public `Client.websocket()` and `AsyncClient.websocket()` APIs from `2.6.0` through `2.9.1`.
### Details
The synchronous and asynchronous SOCKS5 connection implementations upgrade the established proxy tunnel to TLS only when the remote origin scheme is `https`. The equivalent check does not include `wss`. After the SOCKS5 handshake succeeds, the raw stream is therefore passed directly to the HTTP/1.1 connection, which writes the WebSocket upgrade request without first performing a TLS handshake or verifying the destination certificate.
For example, an application using HTTPX2 `2.6.0` through `2.9.1` may open an authenticated WebSocket through a SOCKS proxy:
```python
import httpx2
with httpx2.Client(proxy="socks5://proxy.example:1080") as client:
with client.websocket(
"wss://service.example/private?token=query-secret",
headers={"Authorization": "Bearer header-secret"},
cookies={"session": "cookie-secret"},
) as websocket:
websocket.send_text("private message")
```
On affected versions, the stream passing through the SOCKS proxy begins with a plaintext request such as:
```text
GET /private?token=query-secret HTTP/1.1
Host: service.example
Authorization: Bearer header-secret
Cookie: session=cookie-secret
```
Before HTTPX2 `2.6.0`, the same underlying httpcore2 behavior could be reached by integrations constructing a WebSocket upgrade request through the low-level transport API, but HTTPX2 did not yet provide its native WebSocket client API.
A normal secure WebSocket server will usually reject these plaintext bytes because it expects a TLS ClientHello. However, a malicious or compromised SOCKS proxy can accept the SOCKS connection, observe the plaintext handshake, return a forged `101 Switching Protocols` response, and then read or modify WebSocket frames in both directions. An observer between the proxy and destination may also read the plaintext traffic.
RFC 6455 requires a client using a secure WebSocket connection to perform the TLS handshake before sending the WebSocket opening handshake. A `wss` URI promises confidentiality, integrity, and endpoint authentication through TLS.
### Impact
An attacker able to control or observe the SOCKS proxy path can obtain URL query parameters, authorization headers, cookies, and application messages that the caller expected TLS to protect. Because no TLS handshake occurs, certificate verification also does not occur, allowing an attacker controlling the proxy to impersonate the WebSocket server and inject or alter messages.
Only `wss://` connections routed through a SOCKS5 proxy are affected. Direct `wss://` connections and ordinary `https://` requests through SOCKS already start TLS correctly.
### Mitigation
Upgrade HTTPX2 and httpcore2 to `2.10.0` or later. Patched versions start TLS for both `https` and `wss` origins in the synchronous and asynchronous SOCKS5 connection paths.
If upgrading is not immediately possible, do not route `wss://` connections through a SOCKS proxy. Use a direct secure WebSocket connection or another transport that performs and verifies TLS to the WebSocket origin.
PikiwiDB (Pika) v3.5.7 exposes an internal protobuf replication server on a port derived from the client port plus 2000 (e.g. 11221 when the default client port 9221 is used) that does not authenticate incoming requests. Although requirepass is intended to gate replication — a slave presents it as masterauth inside its MetaSync request — only the MetaSync handler (HandleMetaSyncRequest) validates it; the frame dispatcher (DealMessage) does not require a completed or attempted MetaSync before routing other message types to their handlers. As a result, an unauthenticated remote attacker can connect directly to the replication port and issue TrySync, DBSync, BinlogSync, and RemoveSlaveNode requests, obtaining the full-sync snapshot and live write stream and removing replica nodes, even when requirepass is configured.
A flaw in the Node.js HTTP client can cause request desynchronization in Node.js-based forwarding proxies that rebuild outbound headers from visible IncomingMessage headers while reusing backend connections. This occurs because Node.js may omit headers beyond configured limits from user-visible header collections but still use those omitted headers internally for HTTP message framing, potentially hiding headers like Content-Length from userland. This affects all supported Node.js release lines including versions 22, 24, and 26. The CVSS score is 3.7, indicating medium severity.
Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_typescript allows an unauthenticated attacker to receive unredacted internal error data by provoking an error shape the configured error handler does not match.
apply_error_handler/3 in lib/ash_typescript/rpc/errors.ex is the only hook an application has for redacting or suppressing errors before they reach the client, with a nil return dropping the error entirely. Its rescue clause logs a warning and then returns the original, pre-handler error map. Error handlers are conventionally written as pattern-matching functions over expected error shapes, so an unmatched shape raises FunctionClauseError and the raw transformed error, including any secrets carried in vars, is emitted instead. An intent to suppress an error becomes an intent to publish it. The rescue catches exceptions only, so a handler that throws or exits still propagates.
This issue affects ash_typescript: from 0.8.0 before 0.18.0.
A flaw in Node.js HTTP client can cause a request desynchronization for Node.js-based forwarding proxies that rebuild outbound headers from the visible `IncomingMessage` headers while piping the original body to a reused backend connection.
Node.js can omit headers beyond `maxHeadersCount` / `maxHeaderPairs` from `req.headers`, `req.rawHeaders`, and `req.headersDistinct`, while still using those omitted headers internally for HTTP message framing. In particular, `Content-Length` can be hidden from userland while the request body is still delivered.
This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**.
Incorrect access control in the freeStaClient function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to forcibly disconnect wireless clients via sending a crafted MQTT message to the cs_broker component.
Nodemailer versions before 8.0.9 do not properly sanitize carriage return and line feed characters in list comment fields. This vulnerability allows attackers who can control list.*.comment parameters to inject arbitrary message headers by inserting CRLF sequences. Such header injection can alter mail client behavior and message semantics.
Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_graphql allows a remote client to read internal field names that an application configured its error_handler to redact.
In AshGraphql.Errors, each error is passed to the configured error_handler and the returned map is merged with the pre-handler path via Map.put_new(handled, :path, path). Because put_new defers to the handler only when the handler itself set :path, a sanitizing handler that returns a fresh map or deletes :path has that decision reverted. The re-injected path comes from build_error_path/5, which falls back to raw internal Ash attribute and argument names when no field_names mapping is configured. A validation failure on a non-exposed or nested field therefore returns internal names in the GraphQL error path, defeating the application's redaction.
This issue affects ash_graphql: from 1.9.0 before 1.11.0.
CVE-2026-40014 is a medium severity vulnerability in Open-Xchange GmbH OX Dovecot Pro that allows an attacker who can send mail to a user to craft a message header causing the IMAP THREAD command to consume excessive CPU resources. This can degrade or deny IMAP service when a mail client issues the THREAD command on the affected mailbox. No public exploits are known. Mitigation involves monitoring for abnormal CPU usage, killing offending processes, removing malicious messages, and updating to a non-vulnerable version if available.
In the Linux kernel, the following vulnerability has been resolved: ceph: fix hanging __ceph_get_caps() with stale mds_wanted A reader can hang forever in __ceph_get_caps() when the client no longer holds `FILE_RD`, but local cap state still says that the capability is already wanted (via `mds_wanted`). One way to trigger this is through MDS cap revocation. If another client performs a conflicting operation, the MDS can revoke `FILE_RD` from the reader; the next read then has to reacquire `FILE_RD`. If the cap update that should request `FILE_RD` never reaches the MDS after `cap->mds_wanted` was raised, the reader is left holding only non-file caps while local `mds_wanted` still includes the file read caps. In that state, try_get_cap_refs() sees `need <= mds_wanted` and returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap update that was supposed to request `FILE_RD never reaches the MDS after `cap->mds_wanted was` raised, no further request is sent and the waiter can sleep indefinitely until unrelated cap traffic happens to wake it up. The ordering issue is that `cap->mds_wanted` is updated in __prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually queued for send. That makes one field serve two different meanings at once: what this client wants, and what the client believes the MDS already knows it wants. A proper fix would be to split those states and track whether a cap update is actually in flight or has been observed by the MDS. However, simply moving the `cap->mds_wanted assignment` later would not be sufficient: queueing the message in the messenger does not guarantee that the MDS processed that specific wanted set, and reconnect or message loss can still invalidate that assumption. Fixing that properly would require a larger rework of the cap state machine. To allow simpler backports to stable kernels, this patch implements a simpler workaround: - stop waiting forever in __ceph_get_caps(); after a bounded wait, fall back to the renew path - make ceph_renew_caps() issue a synchronous `OPEN` request whenever the inode still does not actually hold the wanted caps, instead of only calling ceph_check_caps() The extra issued-vs-wanted check in ceph_renew_caps() is necessary because the previous test only checked whether the inode still had any real caps at all. That is not enough after revocation: the client can still hold something like `pLs` and yet be missing `FILE_RD` completely. In that case, falling back to ceph_check_caps() is not sufficient, because it still trusts `cap->mds_wanted` and may resend nothing. By requiring `(issued & wanted) == wanted` before taking the asynchronous path, the code only uses ceph_check_caps() when the `wanted caps` are already actually issued. Otherwise, it sends the synchronous `OPEN` renew. This preserves the existing asynchronous fast path when the wanted caps are already issued, avoids changing cap-state semantics, and fixes the hang by guaranteeing that a stalled waiter eventually retries through a path that does not rely on the stale `mds_wanted` state. [ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to mds_client.h, formatting ]
CVE-2026-71300 is an improper input validation vulnerability in the Apache Camel Atmosphere Websocket component. It allows an external sender to manipulate WebSocket message dispatch headers, potentially causing messages to be delivered to unintended connected clients. This issue affects multiple Apache Camel versions from 4.0.0 up to but not including 4.14.9, 4.15.0 up to but not including 4.18.4, and 4.19.0 up to but not including 4.22.0. The vulnerability is fixed in Apache Camel 4.22.0, 4.14.9, and 4.18.4. Users unable to upgrade immediately should strip the relevant dispatch headers at the trust boundary before the producer. The fix involves renaming header string values into the Camel namespace, which may cause breaking changes for routes that set them by literal string.
CVE-2026-50538 is a heap-based buffer overflow vulnerability in LibVNCClient versions 0.9.12 through 0.9.15. A malicious or man-in-the-middle VNC server can exploit this flaw by sending a crafted FramebufferUpdate message that causes libvncclient to write attacker-controlled data beyond the framebuffer boundary. This vulnerability requires no authentication and triggers immediately upon connection, causing unconditional client crashes (denial of service) and potentially allowing remote code execution by overwriting application callback pointers. The issue is patched in a commit identified as 540332be3e0acc566fa64da6f1b4680c72c724dd.
CVE-2026-67447 is a medium severity vulnerability in axllent mailpit's SMTP DATA reader. The configured maximum message size limit is enforced only after a complete newline-terminated line is buffered, allowing a remote unauthenticated SMTP client to send a single line larger than the limit. This causes excessive memory allocation before the server rejects the message, potentially leading to resource exhaustion. The issue is a partial regression of a previous SMTP DATA body-size limit fix, affecting versions from 1.30.0 up to but not including 1.30.5.
CVE-2026-75596 is a high-severity vulnerability in the Netty framework affecting versions prior to 4.1.137.Final and between 4.2.0.Final and before 4.2.17.Final. It involves inefficient algorithmic complexity in the TLS handshake processing, where an unauthenticated remote peer can cause excessive CPU usage by sending a large ClientHello message fragmented into many small TLS records. This results in quadratic CPU workload on the event loop, degrading TLS handling performance for other clients. The issue is fixed in Netty versions 4.1.137.Final and 4.2.17.Final.
---
_-= Per source details. Do not edit below this line.=-_
## Source: amazon-inspector (004770b4da0c6705f95ef2c8654fd81d37650ffacaad7160041bded02cdb7fbc)
httpz-requests exposes a Telegram bot (`start_bot`, `run_cmd_enc`, `http_request`) whose message handler executes arbitrary shell commands on the host running the package, granting a remote Telegram operator full command execution under the installer's user account. Documented remote commands include arbitrary shell execution (`chalao`, `.sh <command>`, `.py <file>`, `.exec <file>`), destructive filesystem operations (`rm -rf <path>`), single- and bulk-file exfiltration (`take <file>`, `take all`), a full-host backup mode that produces split 50MB archives with `.partNNN` chunking (`get all`), and environment-variable dumping (`.printenv`) — collectively enabling remote theft of filesystem contents and process-environment secrets (cloud, CI, and API credentials). The package is shipped only as compiled Cython `.so` files with no Python source, and self-describes obfuscation features that XOR+base64-encode command strings and disguise execution as `http_request("POST",...)` so plaintext commands do not appear in `ps` or system logs; the Telegram bot token is stored encoded and decoded at runtime by `dec()`. The distribution name `httpz-requests` and import name `httpz_requests` resemble the top-100 PyPI package `requests` while presenting a Telegram remote-shell API instead of an HTTP client, and metadata is unfilled boilerplate (author `Aapka Naam <you@example.com>`, homepage `https://github.com/YOUR_GITHUB_USERNAME/httpz-requests`).
## Source: kam193 (38eff923106836997e28de6d7173a1553da126be230b341fe64f0c4c215769a2)
The package provides Telegram-based remote access to the machine it runs on. It was deliberately created and used to hack other machines, exfiltrate files and credentials. This package automatically ensures persistence and starts a malicious process on import.
---
Category: MALICIOUS - The campaign has clearly malicious intent, like infostealers.
Campaign: 2026-08-httpz-requests
Reasons (based on the campaign):
- files-exfiltration
- rat
- persistence
- uses-telegram-bot
- obfuscation
- native-extension
---
_-= Per source details. Do not edit below this line.=-_
## Source: amazon-inspector (832d1ce61ce1f1e1430c60e94175cc80700dfbb2f8d0f46fd7d00b64720026d8)
Package publishes under a lodash-imitating identity: keywords `lodash`/`lodash-js`, and the README is a verbatim copy of the official lodash 4.18.1 README. The single shipped file `dist/common-js.js` is not lodash — it is a ~770 KB javascript-obfuscator bundle (17,969-entry rotated string array, `_0xNNNN` identifiers). After deobfuscation the bundle is a browser-based cryptocurrency-mining client: it opens a WebSocket to a caller/config-supplied pool URL, spawns a fan-out of Web Workers keyed by `workerId`, handles `nonce` framing, and bundles an AES-GCM decryption primitive (`aesGcmDecrypt` from @noble/ciphers) for pool message decryption. Wallet and worker identifiers are read from a config object with fallbacks (`cfg.wallet||'x'`, `cfg.worker||'worker'`). A developer who installs this expecting a lodash-family utility and ships it in a web application will silently mine cryptocurrency on their end users' browsers, consuming visitor CPU/battery and creating a compliance/abuse liability for the downstream site. The identity masquerade (name/keywords/README all mimicking lodash) combined with heavy string-array obfuscation of the real payload is the standard shape of a supply-chain masquerade attack.
In the Linux kernel, the following vulnerability has been resolved: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO expander handling LEDs) can hold the I2C adapter lock. Inside this parallel transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host controller's input clock to calculate bus timings. This call attempts to acquire the blocked CCF 'prepare_lock', creating a circular dependency that freezes the system. The jz4780 host controller clock itself is static and never changes at runtime. However, calling clk_get_rate() inside the active transfer path introduces an unnecessary dependency on the CCF internal locks. Eliminate this synchronous clk_get_rate() call from the active transfer path by caching the static host peripheral clock rate once - inside the private jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed() to use this cached value, safely decoupling active I2C transactions from the CCF internal locks without any risk of stale timings. Assisted-by web based Google AI (pinpointing the bug and writing the message).