Search: drivers-get.com
71 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Low | 3.5 | EPSS 0.1% | CVE-2026-93670zephyrproject zephyr · Bounds Low3.5EPSS 0.1%CVE Database V5CVE-2026-93670 The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path. EPSS 0.1%Vulnerability | CVE Database V5 | ||
| Low | 3.3 | EPSS 0.1% | CVE-2026-19809zephyrproject zephyr · Info-leak Low3.3EPSS 0.1%CVE Database V5CVE-2026-19809 The user-mode system call verifier z_vrfy_charger_get_prop() in drivers/charger/charger_handlers.c declares an uninitialized union charger_propval k_val on the kernel (privileged) stack, passes it to the charger driver back end via z_impl_charger_get_prop(), and then copies the full sizeof(union charger_propval) back into the calling user thread's buffer with k_usermode_to_copy(). That discloses kernel stack contents on two paths: On error. The copy-out ignores the driver's return code. In-tree back ends return an error without writing through the value pointer for properties they do not implement: charger_gpio_get_prop() returns -ENOTSUP unconditionally, and bq24190_get_prop() has a default: return -ENOTSUP; arm that never touches val. The whole union is then stack residue. On success. A back end writes only the one union member the requested property selects (for example sbs_charger.c writes the one-byte val->present for CHARGER_PROP_PRESENT and returns 0), yet the handler still copies the whole union, so every byte beyond that member is uninitialized. The handler is compiled only when CONFIG_USERSPACE=y and is reachable by any user-mode thread that has been granted access to a charger device object. K_SYSCALL_DRIVER_CHARGER() validates only the device object and its API pointer, not the property identifier, so an unprivileged thread can choose prop freely: an unimplemented property forces the error path, a narrow one the success path, and the call can be repeated at will. Each call discloses up to the size of the union (12 bytes on a 32-bit target, 16 bytes on 64-bit targets where the function-pointer members widen it) of supervisor-stack memory. The bytes are residue of earlier kernel-side frames on the thread's privileged stack and can contain kernel object addresses and saved return addresses, which an unprivileged thread cannot otherwise observe and which help defeat address-layout assumptions when exploiting a separate memory-safety defect. There is no integrity or availability impact. Two commits fix it, and both are needed. 5054384e983c skips the copy-out when the back end reports an error. c31cac727d02 zeroes the union before the driver call, so the bytes copied out on success are driver-written data or zeros. A tree carrying only the first still leaks on every successful call. EPSS 0.1%Vulnerability | CVE Database V5 | ||
| High | 7.8 | EPSS 0.1% | CVE-2026-91007zephyrproject zephyr · Memory-safety High7.8EPSS 0.1%CVE Database V5CVE-2026-91007 The user-mode syscall verifiers for the charger driver API in drivers/charger/charger_handlers.c did not inspect the prop argument before copying union charger_propval across the user/kernel boundary. Two members of that union are function pointers — status_notification (CHARGER_PROP_STATUS_NOTIFICATION) and online_notification (CHARGER_PROP_ONLINE_NOTIFICATION), declared in include/zephyr/drivers/charger.h — and z_vrfy_charger_set_prop() forwarded the caller-supplied union verbatim to the driver's set_property callback for any property. z_vrfy_charger_get_prop() had the mirror defect and copied the stored kernel callback address back out to user memory. With CONFIG_USERSPACE enabled, any user-mode thread that has been granted a charger device object could call charger_set_prop() with CHARGER_PROP_STATUS_NOTIFICATION or CHARGER_PROP_ONLINE_NOTIFICATION and an arbitrary pointer value. Drivers that implement these properties — drivers/charger/charger_max20335.c, drivers/charger/charger_pf1550.c and drivers/charger/charger_bq2518x.c — store the pointer in device data and later invoke it from their interrupt work handlers, which run in supervisor mode, on any charger state change such as a cable plug/unplug. The result is a control-flow hijack at kernel privilege from an unprivileged thread, defeating the isolation that CONFIG_USERSPACE is meant to provide; the read path additionally disclosed a kernel code address to user mode, and clearing a notifier installed by a supervisor thread let user mode suppress charger notifications. Supervisor-mode callers of charger_set_prop()/charger_get_prop() are unaffected. The fix makes both verifiers reject the two notifier properties outright — including when the supplied callback is NULL, since the notifiers are device state — and adds a BUILD_ASSERT on CHARGER_PROP_COMMON_COUNT so that new properties force a re-review of the union's user-mode safety. EPSS 0.1%Vulnerability | CVE Database V5 | ||
| High | 7.8 | EPSS 0.2% | CVE-2026-90833zephyrproject zephyr · Bounds High7.8EPSS 0.2%CVE Database V5CVE-2026-90833 The simulated EEPROM driver validated access ranges in eeprom_range_is_valid() (drivers/eeprom/eeprom_simulator.c) with a single test, (offset + len) <= config->size. Because offset is a signed off_t and len an unsigned size_t of the same rank, the addition is evaluated in unsigned arithmetic: a negative offset combined with a compensating len wraps the sum back into the accepted range. eeprom_sim_read() and eeprom_sim_write() then memcpy() through the EEPROM(addr) macro, which is plain pointer arithmetic on the driver's static mock_eeprom array, so the copy addresses memory located before that array. eeprom_read() and eeprom_write() are __syscall entry points, and their verification handlers in drivers/eeprom/eeprom_handlers.c check only the device object and the caller's own data buffer (K_SYSCALL_MEMORY_READ/K_SYSCALL_MEMORY_WRITE) — the offset argument is passed to the driver unvalidated. With CONFIG_USERSPACE=y, a CONFIG_EEPROM_SIMULATOR device instance, and the device object granted to a user thread (the usage the in-tree tests/drivers/eeprom/api suite exercises from ZTEST_USER threads), an unprivileged thread could supply a negative offset and have the kernel perform the copy on its behalf. The result is an out-of-bounds read of kernel .bss returned into the caller's buffer and, via the write path, an out-of-bounds write of caller-supplied bytes over kernel memory preceding mock_eeprom. Both the start address and the length of the affected span are attacker-selected, so the primitive is sufficient to corrupt adjacent kernel state and escape the user-mode sandbox. Exposure is limited to builds that instantiate the simulated EEPROM (status = "okay" by default on qemu_x86 and native_sim, otherwise added by a devicetree overlay) together with userspace isolation. The fix rejects negative offsets and performs the remaining bound check without overflow. EPSS 0.2%Vulnerability | CVE Database V5 | ||
| –Not rated | – | AlienVault OTX General In October 2026, a U.S. organization was targeted by the Anubis ransomware operation, which deployed a new custom backdoor named Lindnor. This backdoor disguised itself as legitimate Chrome and VMware components on Microsoft SQL Server machines. The attackers used multiple executables to terminate security services by exploiting five known vulnerable drivers via BYOVD techniques. They also installed the AnyDesk remote access tool with Safe Mode persistence to maintain access despite security software disruptions. Although the attackers established extensive persistence and evasion mechanisms, the ransomware encryption payload was blocked before it could execute. Anubis ransomware, operated by the Hawkmoth group as ransomware-as-a-service, has targeted numerous victims, predominantly in the United States. | AlienVault OTX General | |||
| High | 7.8 | EPSS 0.1% | CVE-2026-68451 · linux, linux-aws, linux-gcp, linux-hwe-7.0, linux-ibm, linux-oracle vulnerabilities High7.8EPSS 0.1%GCVE Database Multiple security vulnerabilities were discovered in the Linux kernel affecting a wide range of subsystems and architectures. These flaws could potentially allow an attacker to compromise the system. The issues impact numerous components including USB Gadget drivers, memory management, various device drivers, multiple CPU architectures, file systems, networking, cryptographic APIs, and many others. A security update has been released to address these vulnerabilities. | GCVE Database | ||
| High | 7.8 | KEVEPSS 6.9% | High7.8KEVEPSS 6.9%AlienVault OTX GeneralCVE-2026-33825 BlueHammer (CVE-2026-33825) is a local privilege escalation chain targeting Windows Defender Antimalware Platform versions before 4.18.26030.3011. It requires initial code execution as a standard user and uses a series of legitimate Windows mechanisms to escalate privileges to NT AUTHORITY\SYSTEM. The exploit freezes the MsMpEng.exe process via CloudFilter manipulation and stages malicious update files. Laboratory tests demonstrated successful privilege escalation, recovery of domain-admin credentials from LSASS, and lateral movement using pass-the-hash techniques to compromise domain controllers. Exploitability depends on runtime factors such as pending signature updates, Defender state, filter drivers, VSS, and CloudFilter reachability. No known exploits are reported in the wild, and no patch information is provided. | AlienVault OTX General | ||
| –Not rated | – | AlienVault OTX General The Gentlemen is a ransomware-as-a-service (RaaS) operation active since mid-2025, targeting Windows, Linux, NAS, and BSD systems. It uses a double-extortion approach by encrypting files with ChaCha20 encryption and exfiltrating data. The ransomware kills security processes via vulnerable drivers and spreads laterally using PsExec. A breach in May 2026 exposed internal communications and affiliate details. The group mainly targets organizations in the United States and Europe across various sectors including manufacturing, technology, healthcare, professional services, and retail. | AlienVault OTX General | |||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-98375 Multiple security vulnerabilities were discovered in the Linux kernel affecting numerous subsystems and architectures. These flaws could potentially allow an attacker to compromise the system. The issues impact a wide range of kernel components including USB Gadget drivers, memory management, device drivers, various CPU architectures, file systems, networking, cryptographic APIs, and more. Updates have been released to address these vulnerabilities in various Linux kernel versions. | GCVE Database | ||
| Medium | 6.8 | EPSS 0.3% | CVE-2026-14986zephyrproject zephyr · Bounds Medium6.8EPSS 0.3%CVE Database V5CVE-2026-14986 The ITE it51xxx I2C driver, when operating as an I2C target (slave) in buffer mode (CONFIG_I2C_TARGET + CONFIG_I2C_TARGET_BUFFER_MODE), copies host-supplied write data into the fixed-size data->target_in_buffer inside its target FIFO interrupt handler target_i2c_isr_fifo() in drivers/i2c/i2c_ite_it51xxx.c. The copy loop stores to target_in_buffer[i + data->w_index] and only checks data->w_index against sizeof(data->target_in_buffer) after the write has already completed, so the bounds check cannot prevent the overflow. The running index data->w_index accumulates count bytes on every FIFO-fill interrupt of an ongoing transaction and is reset to zero only on a STOP or timeout condition. An I2C host that streams a single write transaction longer than the buffer (default CONFIG_I2C_TARGET_IT51XXX_MAX_BUF_SIZE = 256 bytes) drives data->w_index past the end of the buffer, and each subsequent host byte is written out of bounds into the adjacent data->target_out_buffer and following static device data. The trigger is a malicious or misbehaving I2C master on the same bus (for example a compromised application processor or a rogue device on an exposed I2C bus); no software privilege on the victim is required and the handler runs in the target's kernel/firmware context. Because both the written values and the overflow length are attacker-controlled, this is an out-of-bounds write that can crash the controller or be shaped toward code execution. The fix adds a pre-write bounds check in target_i2c_fifo_read_to_buf() that aborts and resets the FIFO before any out-of-bounds store. EPSS 0.3%Vulnerability | CVE Database V5 | ||
| Medium | 6.8 | EPSS 0.3% | CVE-2026-16147zephyrproject zephyr · Use After Free Medium6.8EPSS 0.3%CVE Database V5CVE-2026-16147 The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event(). Because udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends &buf->node to uds_ctx->ep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled — a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending &buf->node to the event slist twice (singly-linked-list corruption) and causing a double net_buf_unref(). The IT82xx2 is a USB peripheral controller, so the untrusted USB host controls OUT-transfer packetization and can force this path against any non-control OUT endpoint whose queued buffer exceeds one packet — an ordinary bulk/interrupt pattern. The driver and USB device stack run in kernel context above the external host, giving the host a device-side kernel heap-corruption primitive: a reliable denial of service and, because the written bytes are attacker-controlled, plausible corruption of adjacent net_buf pool memory. The vector is physical (USB attach). The fix defers submission until the buffer is completely filled and lets xfer_work_handler() drive continuation, so each OUT buffer is submitted to the upper stack exactly once. EPSS 0.3%Vulnerability | CVE Database V5 | ||
| Medium | – | EPSS 0.2% | CVE-2026-89449Linux kernel · iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add MediumEPSS 0.2%GCVE DatabaseCVE-2026-89449 In the Linux kernel, the following vulnerability has been resolved: iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add iommu_mock_device_add() first calls iommu_fwspec_init(), which on success allocates both dev->iommu (via dev_iommu_get()) and dev->iommu->fwspec. If the subsequent device_add(dev) call fails, the error path only calls iommu_fwspec_free(dev), which frees fwspec but leaves dev->iommu still allocated. This triggers the following kmemleak report when fuzzing with Syzkaller: BUG: memory leak unreferenced object 0xffff888011e0a200 (size 192): comm "syz.1.1695", pid 24885, jiffies 4295222527 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................ backtrace (crc 25df5bb3): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4575 [inline] slab_alloc_node mm/slub.c:4899 [inline] __kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] dev_iommu_get+0x10c/0x1a0 drivers/iommu/iommu.c:408 iommu_fwspec_init+0x288/0x4d0 drivers/iommu/iommu.c:3087 iommu_mock_device_add+0x46/0xb0 drivers/iommu/iommu.c:385 mock_dev_create drivers/iommu/iommufd/selftest.c:1025 [inline] iommufd_test_mock_domain drivers/iommu/iommufd/selftest.c:1066 [inline] iommufd_test+0x2f8a/0x6190 drivers/iommu/iommufd/selftest.c:2072 iommufd_fops_ioctl+0x367/0x540 drivers/iommu/iommufd/main.c:533 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by calling dev_iommu_free(dev) instead of iommu_fwspec_free(dev) in the device_add() failure path. dev_iommu_free() frees both fwspec and the outer dev_iommu struct and clears dev->iommu. | GCVE Database | ||
| Medium | 5.3 | EPSS 0.2% | CVE-2026-15461zephyrproject zephyr · Memory-safety Medium5.3EPSS 0.2%CVE Database V5CVE-2026-15461 The Sierra Wireless HL78xx modem GNSS driver (drivers/modem/hl78xx/, later drivers/modem/vendor_standalone/hl78xx/) embeds a generic struct gnss_nmea0183_match_data match_data inside struct hl78xx_gnss_data. The generic NMEA0183 match helper (drivers/gnss/gnss_nmea0183_match.c) requires that context to be the first member because its callbacks cast user_data directly to struct gnss_nmea0183_match_data . In the affected releases match_data was the second member (after const struct device dev), so it sat at a non-zero offset while gnss_nmea0183_match_init() initialized it at the correct address. The registered NMEA handlers instead pass the whole device data object (data->devices.gnss->data, offset 0), producing an offset-shifted type confusion between where state is initialized and where the parse callbacks read and write it. When NMEA sentences from the GNSS receiver are parsed, the GGA/RMC callbacks write parsed fix data into the wrong location within the struct, and the GSV callback (gnss_nmea0183_match_gsv_callback, active under CONFIG_GNSS_SATELLITES) reads its satellites pointer and bound from the wrong offsets — non-pointer bytes of struct hl78xx_gnss_data — and then writes parsed struct gnss_satellite entries through that bogus pointer. This is a write through an uninitialized/wild pointer with a garbage bound. The NMEA handlers are registered by default (CONFIG_HL78XX_GNSS_SOURCE_NMEA is the default GNSS source) on devices using the HL78xx GNSS. The driver runs in kernel context and the NMEA data originates from the GNSS radio front-end, so a party able to influence the GNSS signal (for example GNSS/GPS spoofing at radio proximity) can drive the kernel-side parser into the faulty write. The most likely impact is a crash (denial of service) because the bogus pointer resolves to a fixed near-NULL value, with adjacent-memory corruption possible on MMU-less targets. Confidentiality is not affected. Exploitation requires the satellites feature to be enabled and active, so attack complexity is high. EPSS 0.2%Vulnerability | CVE Database V5 | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-80910 In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-wsa-macro: Fix enum kcontrol accesses EAR SPKR PA Gain" and the four "WSA RX* Mux" controls are enumerated, but their get and put callbacks access the value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but wsa-macro was missed. On 64-bit kernels with CONFIG_SND_CTL_DEBUG this trips the elem value sanity check and every read of these controls fails with -EINVAL. | GCVE Database | ||
| –Not rated | – | AlienVault OTX General Analysis of server infrastructure revealed a complete TukTuk C2 framework (version 2.0) with cross-platform capabilities, including Windows and Linux agents, backend infrastructure, and management panel. The server contained eb.sys matching GentleKiller, along with comprehensive EDR neutralization training materials organized in four progressive lessons covering BYOVD techniques, vulnerable driver hunting, and kernel-level research. DLL sideloading configurations targeting Greenshot, ProcMon, Slack, and Postman were identified. Exfiltrated data included 224 Jira tickets from a global technology company containing information related to U.S. defense organizations and defense contractors, plus credentials from a global healthcare company's Infrastructure-as-Code platform exposing AWS keys, production databases, Azure AD, and Bitbucket access. | AlienVault OTX General | |||
| High | 7.8 | EPSS 0.1% | High7.8EPSS 0.1%GCVE DatabaseCVE-2026-80583 In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow | GCVE Database | ||
| Critical | 9.8 | EPSS 0.4% | Critical9.8EPSS 0.4%GCVE DatabaseCVE-2026-80589 In the Linux kernel, the following vulnerability has been resolved: block: stop the timeout timer when releasing a never added disk disk_release() undoes blk_mq_init_allocated_queue() for a disk whose probe failed before add_disk(), but it only calls blk_mq_exit_queue(). Nothing there stops q->timeout, and that timer rolls forward: it stays pending until it next expires, not until the last request completes. So if the driver issued any I/O before adding the disk, the request_queue is freed while still linked into a timer wheel bucket. Commit 6f8191fdf41d ("block: simplify disk shutdown") dropped the blk_cleanup_queue() call that used to stop it. __del_gendisk() and blk_mq_destroy_queue() still do; only the probe failure path lost it. nvme gets there because nvme_update_ns_info() submits Report Zones or FDP io-mgmt-recv on ns->queue before the disk is added, so a later failure - a concurrent reset setting NVME_CTRL_FROZEN, or device_add_disk() failing - lands in put_disk() with the timer armed: BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340 Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37 __timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621 blk_sync_queue+0x22/0x40 block/blk-core.c:222 nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362 nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264 Allocated by task 34: __blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462 nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146 Freed by task 0: blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254 rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857 The queue being synced there is ctrl->admin_q, only a victim sharing a timer wheel bucket with the freed queue's dangling entry; other runs tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work(). Failing nvme_alloc_ns() with a debug patch makes it deterministic: one leaked timer trips KASAN within seconds, while 1987 patched releases produced no splat. Stop the timer and the queue work items before blk_mq_exit_queue(), like blk_mq_destroy_queue() does. Found by FuzzNvme. | GCVE Database | ||
| Medium | 6.1 | EPSS 0.1% | CVE-2026-12232zephyrproject zephyr · Bounds Medium6.1EPSS 0.1%CVE Database V5CVE-2026-12232 The Intel ALH digital-audio-interface driver function dai_alh_get_properties() in drivers/dai/intel/alh/alh.c used a caller-supplied int stream_id with no range validation. The value indexes the fixed-size static const uint8_t alh_handshake_map[64] array and scales a FIFO register address, so an out-of-range stream_id produces an out-of-bounds read of one byte at an attacker-chosen signed offset from the array. That byte is written into prop->dma_hs_id and the resulting struct dai_properties is copied back to the caller, leaking it. dai_get_properties_copy() is a Zephyr __syscall, and its verifier z_vrfy_dai_get_properties_copy() (drivers/dai/dai_handlers.c) validates only the device-object permission and the destination buffer, not stream_id. A user-mode thread that has been granted access to the ALH DAI device object can therefore call the syscall with an arbitrary stream_id, crossing the userspace/kernel sandbox boundary. The impact is a one-byte-per-call arbitrary-offset kernel information disclosure (and leakage of a computed kernel address via fifo_address); a stream_id that resolves to an unmapped page faults in kernel context, giving a local denial of service. Exploitation requires CONFIG_USERSPACE and device access, making this a local, moderate-severity issue. The fix rejects negative and too-large stream_id values up front and returns NULL, which the copy wrapper maps to -ENOENT. EPSS 0.1%Vulnerability | CVE Database V5 | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-68206 In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC active reference counts HEVC slice parameters are shared stateless V4L2 controls, but the common validation path does not verify the active L0/L1 reference counts before driver-specific code consumes them. The original report came from Cedrus, but the active count bounds are not Cedrus-specific. Validate them in the common HEVC slice control path so stateless HEVC drivers get the same basic guarantees as soon as the control is queued. Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may use out-of-range sentinel values such as 0xff for missing references, and some hardware can use that information for concealment. Keep this common check limited to the active reference counts. | GCVE Database | ||
| High | 4.1 | EPSS 0.2% | CVE-2026-68363Linux kernel · wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request High4.1EPSS 0.2%GCVE DatabaseCVE-2026-68363 In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request ath9k_hif_request_firmware() re-arms an asynchronous firmware load via request_firmware_nowait(), passing hif_dev as the completion context, and then still dereferences hif_dev: dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n", hif_dev->fw_name); The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events" workqueue and, when the firmware is missing, walks the retry chain into ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That releases the wait_for_completion(&hif_dev->fw_done) in a concurrent ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing dev_info() in the frame that re-armed the request can therefore read freed memory (hif_dev->udev, the first field of struct hif_device_usb): BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware Read of size 8 ... by task kworker/... ath9k_hif_request_firmware ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247 request_firmware_work_func Allocated by ...: ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c Freed by ...: ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c The fw_done barrier only makes disconnect wait for the firmware chain to *terminate*; it does not protect the outer ath9k_hif_request_firmware() frame that re-armed the request and keeps touching hif_dev afterwards. Drop the post-request dev_info(): it is the only use of hif_dev after the async request is armed, and it is purely informational (the dev_err() on the failure path runs only when request_firmware_nowait() did not arm a callback, so hif_dev is still alive there). This was first reported by syzbot as a single, non-reproduced crash that was later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer, which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc device whose firmware download fails). The vulnerable code is unchanged and still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN once the (sub-microsecond) race window is widened. | GCVE Database |
Page 1 of 4