CVE-2025-15358VulnerabilityPublished 30 Dec 2025

CVE-2025-15358: Delta Electronics DVP-12SE11T · Improper Input Validation

Affects Delta Electronics DVP-12SE11TSource CVE Database V5

Not known to be exploited · CVSS 7.5 High.

Data as of 26 Oct 2026, 08:30 UTC

CVSS 3.1 base score

7.5High

How severe the flaw is on the 0–10 CVSS scale.

EPSS: 0.3% chance of exploitation in 30 days – higher than 25% of CVEsExploit Prediction Scoring System: the likelihood attackers will use this flaw soon.

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Attack Vector: Network
Attack Complexity: Low
Privileges Required: None
User Interaction: None
Scope: Unchanged
Confidentiality: None
Integrity: None
Availability: High

Bold values are the worst case: easiest to exploit or largest impact.

Attack Vector: Network: The vulnerable component is bound to the network stack and the set of possible attackers extends beyond the other options listed, up to and including the entire Internet. Such a vulnerability is often termed 'remotely exploitable' and can be thought of as an attack being exploitable at the protocol level one or more network hops away (e.g., across one or more routers).
Attack Complexity: Low: Specialized access conditions or extenuating circumstances do not exist. An attacker can expect repeatable success against the vulnerable component.
Privileges Required: None: The attacker is unauthorized prior to attack, and therefore does not require any access to settings or files to carry out an attack.
User Interaction: None: The vulnerable system can be exploited without any interaction from any user.
Scope: Unchanged: An exploited vulnerability can only affect resources managed by the same security authority. In this case, the vulnerable component and the impacted component are either the same, or both are managed by the same security authority.
Confidentiality: None: There is no loss of confidentiality within the impacted component.
Integrity: None: There is no loss of integrity within the impacted component.
Availability: High: There is total loss of availability, resulting in the attacker being able to fully deny access to resources in the impacted component; this loss is either sustained (while the attacker continues to deliver the attack) or persistent (the condition persists even after the attack has completed). Alternatively, the attacker has the ability to deny some availability, but the loss of availability presents a direct, serious consequence to the impacted component (e.g., the attacker cannot disrupt existing connections, but can prevent new connections; the attacker can repeatedly exploit a vulnerability that, in each instance of a successful attack, leaks a only small amount of memory, but after repeated exploitation causes a service to become completely unavailable).

Definitions: FIRST CVSS v3.1 specification.

Exploitation evidence

Disclosed: evidence found.
CVE published 30 Dec 2025
Detectable: no evidence on record.
No public nuclei template indexed
Weaponised: no evidence on record.
No public exploit code indexed in Metasploit or Exploit-DB
Exploited in the wildExploited: no evidence on record.
Not in CISA KEV and no source reports exploitation
Observed by OffSeq MirageSeen by Mirage: no evidence on record.
No attack traffic recorded by OffSeq Mirage sensors

A missing step is not evidence of safety. Sources: cve.org (opens in a new tab), the Metasploit, Exploit-DB and nuclei-templates index as of 26 Oct 2026.

Disclosed: The CVE record is public on cve.org. Its publication is t = 0.
Detectable: A public nuclei template can find exposed instances, for defenders and attackers alike.
Weaponised: Public exploit code exists in Metasploit or Exploit-DB, or CISA SSVC reports a public proof of concept.
Exploited in the wild: CISA KEV lists it, CISA SSVC rates exploitation active, or a source reports attacks.
Observed by OffSeq Mirage: OffSeq Mirage honeypot sensors recorded attack traffic for this CVE, or found exposed hosts without attack traffic.

Moments are spaced evenly, not to scale; a dashed line marks a gap of six months or more. Deltas count from t = 0. Sources that give only a date (CISA KEV, Exploit-DB, or a time of exactly 00:00Z) read “same day” rather than hours. Metasploit modules carry the flaw’s disclosure date, not their release date, and nuclei templates carry no date, so both appear above but not on the timeline.

What to do

Affected software

Product	Affected	Fixed in
Delta Electronics DVP-12SE11T	Affected =0	Fixed in–

AI-suggested

1. Immediately identify and inventory all Delta Electronics DVP-12SE11T devices within the network. 2. Implement strict network segmentation to isolate PLCs from general IT networks and restrict access to trusted management stations only. 3. Deploy firewall rules and intrusion detection/prevention systems (IDS/IPS) to monitor and block suspicious traffic targeting the PLCs, especially malformed packets that could trigger the DoS. 4. Limit remote access to the devices using VPNs with strong authentication and restrict access to known IP addresses. 5. Monitor device logs and network traffic for anomalies indicating attempted exploitation. 6. Engage with Delta Electronics for official patches or firmware updates and apply them promptly once available. 7. Conduct regular security assessments and penetration testing focused on industrial control systems to detect similar vulnerabilities. 8. Train operational technology (OT) personnel on recognizing and responding to DoS incidents affecting PLCs. 9. Develop and test incident response plans specific to industrial control system disruptions. 10. Consider deploying redundant or failover PLCs to maintain availability during an attack.

Description

DVP-12SE11T - Denial of Service Vulnerability

Impact

For European organizations, especially those in manufacturing, energy, and critical infrastructure sectors, this vulnerability poses a significant risk to operational continuity. The DVP-12SE11T PLCs are integral to process control and automation; a denial of service could halt production lines, disrupt supply chains, and cause financial losses. In safety-critical environments, such as power plants or transportation systems, availability loss could also lead to hazardous conditions. The lack of authentication and user interaction requirements means attackers can exploit this vulnerability remotely and easily if the devices are exposed or accessible within internal networks. This elevates the threat level for organizations with insufficient network segmentation or weak perimeter defenses. Additionally, the absence of known exploits in the wild provides a window for proactive defense, but also means attackers may develop exploits soon after disclosure. European organizations must prioritize identifying affected devices and implementing compensating controls to mitigate potential operational disruptions.

CWE-20Improper Input Validation (opens in a new tab)
Class weaknessLikelihood of exploit: HighCWE Top 25 (2025): #18OWASP Top 10 A05:2025: Injection (opens in a new tab)
The product receives input or data, but it does not validate or incorrectly validates that the input has the properties that are required to process the data safely and correctly.
MITRE discourages mapping vulnerabilities to this broad entry; the root cause is usually a more specific weakness.
Architecture and Design · Attack Surface Reduction
Consider using language-theoretic security (LangSec) techniques that characterize inputs using a formal language and build "recognizers" for that language. This effectively requires parsing to be a distinct layer that effectively enforces a boundary between raw input and internal data representations, instead of…
Architecture and Design · Libraries or Frameworks
Use an input validation framework such as Struts or the OWASP ESAPI Validation API. Note that using a framework does not automatically address all input validation problems; be mindful of weaknesses that could arise from misusing the framework itself (CWE-1173).
Architecture and Design · Implementation · Attack Surface Reduction
Understand all the potential areas where untrusted inputs can enter the product, including but not limited to: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any…
OWASP Cheat Sheets
XML Security (opens in a new tab)
Mass Assignment (opens in a new tab)
Injection Prevention (opens in a new tab)
SQL Injection Prevention (opens in a new tab)
Injection Prevention in Java (opens in a new tab)
OWASP ASVS 4.0.3
V13.3.1 (opens in a new tab)
V5.1.4 (opens in a new tab)
V5.1.3 (opens in a new tab)
Attack patterns
Buffer Overflow via Environment Variables (opens in a new tab)
Server Side Include (SSI) Injection (opens in a new tab)
Cross Zone Scripting (opens in a new tab)
Command Line Execution through SQL Injection (opens in a new tab)
Object Relational Mapping Injection (opens in a new tab)
From MITRE CWE, MITRE CAPEC and OWASP (Top 10, OpenCRE).

References

filecenter.deltaww.com/news/download/doc/Delta-PCSA-2025-00022_DVP-12SE11T%20Multiple%20Vulnerabilities.pdf (opens in a new tab)

Community reviews

Loading reviews…

Exploitation evidence

What to do

Affected software

Description

AI analysisMachine-generated, updated 30 Dec 2025, 22:43 UTC

WeaknessesCWE-20

Technical details

References

Community reviews

Related threats