Drupal has released patches for five vulnerabilities, including two critical remote code execution (RCE) flaws affecting the Entity List and Field UI modules. These vulnerabilities are not exploitable with the modules alone but can be exploited when combined with certain contributed modules, with at least one exploit path requiring no authentication. Users are advised to update to specific patched versions or uninstall the Field UI module as a mitigation. No active exploitation in the wild has been reported, but Drupal warns that exploits could be developed rapidly.
A weakness has been identified in MemTensor memmy-agent up to 1.0.9/1.1.1/1.2.2. The impacted element is the function requireAdminWrite of the file Memory/src/server/http.ts of the component Memory Service. This manipulation causes resource consumption. Remote exploitation of the attack is possible. The attack is considered to have high complexity. The exploitability is regarded as difficult. The exploit has been made available to the public and could be used for attacks. The exploit is partially overstated. While "POST /api/v1/admin/shutdown" accepts unauthenticated requests when no token is configured, it’s designed for local use and later received cross-origin fixes. Unauthenticated endpoint exposure is confirmed; browser-triggered DoS remains likely but depends on specific browser behavior.
CLI Bridge provides filesystem access within a workspace root. Prior to 0.0.2, a dangling symlink pointing outside the workspace root bypasses resolveSafePath when fs.realpathSync throws ENOENT for a nonexistent target. The fallback resolves only the parent directory and returns the symlink path as safe, so write_file follows the link and can write arbitrary files outside the workspace root. This issue is fixed in version 0.0.2.
Netskope is notified about a potential gap in its agent (NSClient) where a system with Netskope Client while connecting to an access point with Captive Portal switches to a Network which already has internet connectivity, the Captive Portal does not close. This allows the possibility of abuse via the Captive Portal using a rogue access point to either access malicious sites or exfiltrate data.The issue impacts all versions prior to R142
Incorrect default permissions in the Windows installer of Progressive Robot hMailServer 6.0.0 through 6.3.6 allow a local authenticated user to run code as the mail server's high-privileged accounts when the product is installed in a folder whose permissions are inherited from a writable parent, such as the root of a drive. The installer places the server's programs in the Bin folder of the program folder and gives neither the program folder nor Bin any permissions of their own, so they inherit the parent's. Under the default location, Program Files, ordinary users receive only read and execute and the configuration is not affected; but the installer accepts any path without warning, and a program folder at the root of an NTFS volume inherits write access for a broad group - Authenticated Users (Modify) on a Windows client, Users (create files and folders) on Windows Server. A local user without administrator rights can then alter or replace the service program, which runs as LocalSystem or as the service's virtual account, or the programs an administrator runs elevated from Bin during setup and maintenance, or place a library in Bin that those programs load in place of the system copy, gaining code execution with those privileges. The default Program Files installation is not affected.
Unchecked input for a loop condition in Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to stop the server carrying mail. The server bounds the mail it generates in response to a message - a rule forward, reply or copy, an account forward, a Sieve redirect, vacation or notify, a bounce, an out-of-office reply - by a counter it carries in the message's X-hMailServer-LoopCount header, and makes no more once the counter reaches the configured rule loop limit (5 by default); that is what ends a forwarding or auto-reply cycle in a bounded number of hops. X-hMailServer-LoopCount is an ordinary header that is not stripped from mail arriving from outside, and the server read it with a signed conversion and no validation, so a count below zero passed every test against the limit: a sender who sets X-hMailServer-LoopCount to a negative value, or on the Linux builds to a value above the 32-bit signed range that the conversion wraps to a negative one, lifts the bound, and a message that enters a generated-mail cycle then loops up to about two thousand million times, each hop a queued message and a delivery, filling the queue and disk and stopping mail service. The Sieve notify action (from 6.2.22) consulted no limit at all, and its increment of the count could overflow a signed integer; and an account could reset the counter on its own mail through a Sieve editheader of the header (from 6.2.22) or a rule Set header value action (all versions) ahead of a forward or redirect.
Missing authorization in the Sieve editheader action (6.2.22 through 6.3.6) and in the mail-rule Set header value action (6.0.0 through 6.3.6) of Progressive Robot hMailServer allows an authenticated user to make the server send mail as any address, DKIM-signed where the address is at a domain the server signs for. A Sieve script's editheader (addheader/deleteheader) could add or delete any header field except Received and Return-Path, and the server applies a script's header edits before it queues a redirect, so the redirected copy is sent as the script left it. The server signs a message's first delivery pass as the domain named in its From header wherever it signs DKIM for that domain and the message carries no signature of it. A script could therefore delete and re-add From - another account's address, or anyone's at a hosted domain - and redirect, so the server sent the message in that name and, for a hosted domain, signed it with that domain's DKIM key, a forgery aligned to pass the domain's DMARC; or, where another sender's domain is one the server signs for, delete the DKIM-Signature that sender's message arrived with, alter a field, and redirect, so the server re-signed the altered message as that sender's domain. editheader placed no restriction on From, Sender, Resent-From, Resent-Sender or DKIM-Signature. The editheader action was introduced in 6.2.22. In the mail-rule engine, a domain's or an account's rule's Set header value action could likewise set From, Sender, Resent-From, Resent-Sender or DKIM-Signature ahead of a forward or a copy, whoever the rule belonged to, so that an account acting on its own rules over COM, a domain administrator, or an API key confined to a domain (over the REST API from 6.3.4) could have the server forward or copy a message in the name of any address, signed, where that address is at a domain the server hosts with DKIM signing enabled, with that domain's key.
Missing authorization in the Sieve notify action (6.2.22 through 6.3.6) and in the mail-rule Reply action (6.0.0 through 6.3.6) of Progressive Robot hMailServer allows an authenticated user to send mail through the server as any address. A Sieve notify sends a notification message, and its :from tag names the sender; the server set the notification's From header to that :from as the script wrote it, without checking that the address belongs to the account - the check that the Sieve vacation action applies to its own :from, and that the server applies to the sender of mail queued over COM or sent from the webmail. An account that can store a Sieve script (over ManageSieve, the REST API's self-service filter, or the administration interface) could therefore have the server send a notification from any address, on this server or anywhere; and where the claimed address is at a domain the server hosts with DKIM signing enabled, the server signed the notification with that domain's DKIM key, because it signs by the From header's domain, producing forged mail aligned to pass the domain's DMARC policy. The notify action and this behaviour were introduced in 6.2.22. In the mail-rule engine, a rule's Reply was likewise sent from whatever address the action named, whoever the rule belonged to, so that an account acting on its own rules over COM, a domain administrator, or an API key confined to a domain (over the REST API from 6.3.4) could have a domain's or an account's rule reply from any address, signed, where that address is at a domain the server hosts with DKIM signing enabled, with that domain's key.
Use of a less trusted source in the DKIM signing of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write signed with the DKIM key of a domain the server hosts, so that it passes DKIM and DMARC for that domain at other receivers. With DKIM signing enabled for a hosted domain, the server signed every message on its first delivery pass as the domain named in its From header, before local delivery, whatever the message's origin and without checking that its sender had authenticated. A sender anywhere could therefore send the server, as ordinary inbound mail, a message whose From is any address at such a domain, and the server signed it with that domain's key. Every copy the server then sent on to an address outside carried a valid signature aligned with the forged From, whatever the domain's DMARC policy: an account's forward, a mail rule's forward or copy, a Sieve redirect, an alias or distribution list with an outside member, the mirror copy, a managed-list or journal copy, or a message released from quarantine. A signed copy can also be re-sent to other recipients while the domain's key is unchanged. Exploitation needs DKIM signing to be enabled for the hosted domain (it is off until configured) and, for the forgery to leave the server, a forward, alias, list or rule that carries the domain's mail to an outside address. The signer likewise signed a message submitted over authenticated SMTP as whatever hosted domain its From header named, a header authenticated SMTP does not hold to the submitting account, so that an account of one hosted domain could have mail written in the name of another hosted domain signed with that domain's key; this mattered where the server holds signed-in senders to their own envelope addresses (SmtpAuthenticatedSenderCheck, off by default), as the signature was then the remaining way for such mail to pass the other domain's DMARC policy.
A vulnerability was detected in vraj404 Criminal-Management-System up to 2808d057e7ddc5295519a487365b0cacfd0ba8c4. This affects the function mysqli_error of the file Officers/addOfficer.php of the component Officer Registration Form. Performing a manipulation of the argument offName/offID/ID/contact/gender/weapon/role results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet.
Picomatch through 4.0.7 contains a regular expression denial of service vulnerability that allows attackers to block the event loop by supplying single-branch repeated extglob patterns. Attackers can provide globs like +(*) or +(*a), which analyzeRepeatedExtglob in lib/parse.js skips, causing exponential backtracking against short crafted strings and denying service to Node.js applications.
Crawl4AI from 0.8.7 through 0.9.5 contains a server-side request forgery vulnerability in the Docker API server that allows unauthenticated attackers to bypass destination checks via URL userinfo parsing differences. Attackers can set fetch_ssl_certificate=true with crafted userinfo URLs so SSLCertificate.from_url connects to internal hosts on port 443, probing reachability and leaking certificate details.
docling-core 2.5.0 before 2.103.0 contains a local file disclosure vulnerability that allows attackers to read local images by supplying plain filesystem paths in ImageRef URIs, bypassing the allow_image_file_uri gate. Attackers can submit crafted DoclingDocument JSON or YAML that, when exported with ImageRefMode.EMBEDDED or rendered to HTML, embeds readable local image files as base64 and reveals path existence.
@rvf/set-get before 7.0.4 contains a prototype pollution vulnerability in setPath that allows unauthenticated attackers to overwrite properties of shared built-in functions via inherited Object.prototype methods. Attackers can submit a form field named hasOwnProperty.call through @rvf/core form parsing to replace the shared function property, causing process-wide denial of service until restart.
crewai-tools through 1.15.28 contains a server-side request forgery vulnerability in SeleniumScrapingTool that allows attackers to fetch internal resources because it never applies the validate_url private-address check. Attackers influencing agent tool input through prompt injection can direct headless Chrome to loopback, RFC1918, or cloud metadata addresses to disclose internal data and cloud credentials.
sqlparse through 0.6.0 contains a PHP code injection vulnerability that allows attackers to inject PHP expressions by supplying SQL text containing unescaped dollar signs. Attackers can embed ${expr} or {${expr}} sequences that OutputPHPFilter places in double-quoted strings, executing arbitrary PHP code when the generated snippet runs.
Semaphore UI through 2.19.16 contains a remote code execution vulnerability that allows users with the task_runner role to override protected Ansible variables by supplying arbitrary keys in the task environment JSON. Attackers can POST tasks setting ansible_ssh_common_args with a ProxyCommand or ansible_connection=local to execute commands as the Semaphore server user, exposing encryption keys, SSH keys and stored secrets.
docTR through 1.1.0 contains an unsafe deserialization vulnerability in load_pretrained_params() that loads checkpoints with torch.load without weights_only=True. Attackers who control a local or URL-supplied checkpoint can embed a malicious pickle payload to execute Python code with the loading process's privileges on torch releases before 2.6.
The Rank Math PRO WordPress plugin version 3.0.123 was compromised in a supply chain attack, with malware injected into packages distributed between October 15 and October 16, 2026. The malicious code could allow attackers to take over websites where the plugin was activated. The malware is persistent, recreating hidden backdoors and modifying files and settings to maintain access. Rank Math released a clean version 3.0.124 immediately after discovering the compromise. Users who installed or activated version 3.0.123 during the affected window should consider their sites compromised and restore from clean backups or follow detailed cleanup steps.
A security vulnerability has been detected in vraj404 Criminal-Management-System up to 2808d057e7ddc5295519a487365b0cacfd0ba8c4. Affected by this issue is the function mysqli_query of the file Officers/searchOff.php of the component Search Page. Such manipulation of the argument Search leads to sql injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet.