Search: drivers-get.com
71 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| High | 5.1 | EPSS 0.2% | High5.1EPSS 0.2%GCVE DatabaseCVE-2026-64571 In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying. | GCVE Database | ||
| –Not rated | – | Tenable Research As federal enforcement tightens and states begin stepping in with their own cybersecurity mandates, water and wastewater utilities face a looming wave of hard compliance deadlines, compounded by recent cyber attacks on state water utilities. Key takeaways While the EPA’s national sanitary-survey mandate stalled in court, the agency is aggressively using existing authority, technical guidance, and enforcement alerts to inspect cyber gaps. Community water systems serving 3,301 to 49,999 people, the vast majority of U.S. systems, must certify their Risk and Resilience Assessments (RRAs) by June 30, 2026, under AWIA 2013. New York has already finalized binding cybersecurity regulations for wastewater facilities, setting a regulatory template that other states are expected to follow in 2026 and 2027. Under CIRCIA, utilities will soon be legally required to report significant cyber incidents to CISA within 72 hours and ransom payments within 24 hours. Federal grant programs (SLCGP) and liability protections have been extended through Sept. 30, 2026, but remain tied to unpredictable budget cycles while targeted cyber threats continue to rise. Navigating the new reality of water cyber regulation In 2023, the U.S. EPA made an initial push to fold cybersecurity evaluations into state sanitary surveys. While that effort was stayed in court and subsequently withdrawn, the underlying federal statutory requirements and enforcement drivers remain fully active. Instead of relying on new survey rules, federal and state regulators are actively using existing statutory authority and technical guidance to shift water cybersecurity from voluntary recommendations to enforceable compliance deadlines. The urgency to strengthen cybersecurity for water facilities is underscored by a recent coordinated cyber attack that disrupted water and wastewater utility operations across more than 30 Minnesota communities in late July 2026. Utility cyber regulations and mandates moving forward America’s Water Infrastructure Act (AWIA) 2013 / Safe Drinking Water Act (SDWA) 1433 is still very much in force. Community water systems serving more than 3,300 people are legally required to certify a Risk and Resilience Assessment (RRA) and Emergency Response Plan (ERP) to EPA on a five-year recertification cycle, and that cycle explicitly covers cyber threats, not just physical and natural hazards. Recertification deadlines: Systems serving 100,000-plus people: March 31, 2025 50,000–99,999 tier: Dec. 31, 2025 3,301–49,999 tier, the vast majority of U.S. water systems: June 30, 2026, with ERPs due six months after. The EPA hasn’t stopped pushing on cyber. It’s just doing it through guidance, technical assistance, and enforcement of existing authority rather than new rulemaking. In May 2024, the EPA issued an enforcement alert warning it would step up inspections tied to cybersecurity gaps found in drinking water systems. On Oct. 23, 2025, the EPA released an updated package of cyber tools: Revised Emergency Response Plan guide Cybersecurity Incident Response Plan (CIRP) template Incident-specific checklists Cybersecurity procurement checklist These tools are designed to help utilities fold cybersecurity directly into the RRA/ERP process they’re already required to complete. States are stepping in where EPA stepped back With the EPA’s national sanitary-survey mandate dead, states have started writing their own cybersecurity rules for water systems. New York is the clearest example: In March 2026, the New York State Department of Environmental Conservation finalized amendments to six New York Codes, Rules and Regulations (NYCRR) Parts 616, 650 and 750 , adding binding cybersecurity regulations for wastewater treatment facilities, including mandatory incident reporting and access-control requirements built around EPA’s own cybersecurity guidance, incorporated into the rule by reference. Reporting requirements took effect March 26, 2026. It’s a template other states are watchi… | Tenable Research | |||
| Medium | 5.5 | EPSS 0.1% | Medium5.5EPSS 0.1%GCVE DatabaseCVE-2026-64476 In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Latch disable_idle_d3 per device When disable_idle_d3 was introduced in vfio-pci, it directly manipulated the device power state with pci_set_power_state(). There were no refcounts to maintain or balanced operations, we could unconditionally bring the device to D0 and conditionally move it to D3hot. Therefore the module parameter was made writable. Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect of the module parameter was nullified. The parameter value could still be changed through sysfs, but the vfio-pci driver latched the values into vfio-pci-core globals at module init. Loading the vfio-pci module, or unloading and reloading, with non-default or different values could change the globals relative to existing devices bound to vfio-pci variant drivers. Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM"), which marks the point where power states became refcounted. PM get and put operations need to be balanced, but the same module operations noted above can change the global variables relative to those devices already bound to vfio-pci variant drivers. This introduces a window where PM operations can now become unbalanced. To resolve this with a narrow footprint for stable backports, the disable_idle_d3 flag is latched into the vfio_pci_core_device at the time of initialization, such that the device always operates with a consistent value. NB. vfio_pci_dev_set_try_reset() now unconditionally raises the runtime PM usage count around bus reset to account for disable_idle_d3 becoming a per-device rather than global flag. When this flag is set, the additional get/put pair is harmless and allows continued use of the shared vfio_pci_dev_set_pm_runtime_get() helper. | GCVE Database | ||
| Medium | 5.5 | EPSS 0.1% | CVE-2026-64457Linux kernel · NULL Pointer Dereference Medium5.5EPSS 0.1%GCVE DatabaseCVE-2026-64457 In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths. | GCVE Database | ||
| High | – | HighGCVE Database It was discovered that some AMD processors did not properly clear data in the floating point divider unit during speculative execution. A local attacker could use this to expose sensitive information. (CVE-2025-54505) It was discovered that some AMD Zen 2 processors did not properly isolate shared resources in the operation cache. A local attacker could possibly use this issue to corrupt instructions executed at a higher privilege level, resulting in privilege escalation. (CVE-2025-54518) It was discovered that some AMD Zen 5 processors supporting RDSEED instruction did not properly handle entropy, potentially resulting in the consumption of insufficiently random values. A local attacker could possibly use this issue to influence the values returned by the RDSEED instruction causing loss of confidentiality and integrity. (CVE-2025-62626) Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems: - ARM64 architecture; - MIPS architecture; - PowerPC architecture; - RISC-V architecture; - S390 architecture; - x86 architecture; - Block layer subsystem; - Cryptographic API; - Compute Acceleration Framework; - ACPI drivers; - Serial ATA and Parallel ATA drivers; - ATM drivers; - Drivers core; - Power management core; - DRBD Distributed Replicated Block Device drivers; - Rados block device (RBD) driver; - RNBD block device driver; - Ublk userspace block driver; - Compressed RAM block device driver; - Bluetooth drivers; - Bus devices; - Character device driver; - TPM device driver; - Clock framework and drivers; - Clocksource drivers; - Data acquisition framework and drivers; - Counter interface drivers; - CPU frequency scaling framework; - CPU idle management framework; - Hardware crypto device drivers; - CXL (Compute Express Link) drivers; - DMA engine subsystem; - EDAC drivers; - EFI core; - GPIO subsystem; - GPU drivers; - Greybus drivers; - HID subsystem; - Hardware monitoring drivers; - I2C subsystem; - IIO subsystem; - IIO ADC drivers; - InfiniBand drivers; - Input Device (Miscellaneous) drivers; - IOMMU subsystem; - IRQ chip drivers; - LED subsystem; - Mailbox framework; - Multiple devices driver; - Media drivers; - MediaTek SMI driver; - NVIDIA Tegra memory controller driver; - Multifunction device drivers; - Broadcom VK accelerator driver; - Fastrpc Driver; - IBM Advanced System Management driver; - MMC subsystem; - MOST (Media Oriented Systems Transport) drivers; - MTD block device drivers; - Network drivers; - Ethernet bonding driver; - Mellanox network drivers; - Microsoft Azure Network Adapter (MANA) driver; - STMicroelectronics network drivers; - Ethernet team driver; - MediaTek network drivers; - Near Field Communication (NFC) drivers; - NTB driver; - NVDIMM (Non-Volatile Memory Device) drivers; - NVME drivers; - Device tree and open firmware driver; - PCI subsystem; - Performance monitor drivers; - Pin controllers subsystem; - x86 platform drivers; - Broadcom BCM2835 power domain driver; - Generic PM domains; - i.MX PM domains; - Power supply drivers; - RapidIO drivers; - RAS (Reliability, Availability, Serviceability) subsystem; - Remote Processor subsystem; - RPMSG subsystem; - S/390 drivers; - SCSI subsystem; - SLIMbus drivers; - Freescale SoC drivers; - MediaTek SoC drivers; - Microchip PolarFire SoC system controller driver; - Texas Instruments SoC drivers; - SPI subsystem; - Greybus lights staging drivers; - Media staging drivers; - Realtek RTL8723BS SDIO drivers; - SM750 framebuffer staging driver; - TCM subsystem; - Thermal drivers; - TTY drivers; - UFS subsystem; - Cadence USB3 driver; - ChipIdea USB driver; - USB Device Class drivers; - ULPI bus; - USB core drivers; - DesignWare USB2 driver; - DesignWare USB3 driver; - USB Gadget drivers; - USB Host Controller drivers; - Mustek MDC800 USB digital camera driver; - USB YUREX driver; - Renesas USBHS Controller drivers; - USB Type-C Connector System Software Interface driver; - USB over IP driver; - vDPA drivers; - VFIO drivers; - Virtio Host (VHOST) subsystem; - Framebuffer layer; - TSM TDX Guest driver; - Xen hypervisor drivers; - File systems infrastructure; - BTRFS file system; - Ceph distributed file system; - EROFS file system; - Ext4 file system; - F2FS file system; - FAT file system; - FUSE (File system in Userspace); - GFS2 file system; - HFS+ file system; - Journaling layer for block devices (JBD2); - JFS file system; - Network file systems library; - Network file system (NFS) server daemon; - NILFS2 file system; - File system notification infrastructure; - NTFS3 file system; - OCFS2 file system; - Proc file system; - Pstore file system; | GCVE Database | |||
| Medium | 5.6 | EPSS 2.0% | CVE-2026-46420shivammathur setup-php · OS Command Injection Medium5.6EPSS 2.0%CVE Database V5CVE-2026-46420 setup-php is a GitHub action to set up PHP with extensions, php.ini configuration, coverage drivers, and tools. From 2.25.0 prior to 2.37.1, shivammathur/setup-php resolves the PHP version from repository-controlled files such as .php-version, composer.lock through platform-overrides.php, and composer.json through config.platform.php, and insufficiently constrains those values before incorporating them into generated shell or PowerShell setup scripts, allowing command injection on a GitHub Actions runner when workflows such as pull_request_target check out attacker-controlled contents before invoking setup-php. This issue is fixed in version 2.37.1. | CVE Database V5 | ||
| Medium | 5.0 | EPSS 0.2% | CVE-2026-10664zephyrproject zephyr · Memory-safety Medium5.0EPSS 0.2%CVE Database V5CVE-2026-10664 The nRF70 Wi-Fi driver's power-save event handler nrf_wifi_event_proc_get_power_save_info() in drivers/wifi/nrf_wifi/src/wifi_mgmt.c copied TWT (Target Wake Time) flow entries from an nrf_wifi_umac_event_power_save_info event into the fixed-size twt_flows[WIFI_MAX_TWT_FLOWS] (8-element) array of a caller-supplied struct wifi_ps_config, looping over event-provided num_twt_flows without validating it against WIFI_MAX_TWT_FLOWS or checking event_len. When num_twt_flows exceeds 8, the handler writes past the destination array (which is typically on the caller's stack, e.g. the wifi ps shell command) -- an out-of-bounds write of ~40-byte TWT entries -- and reads twt_flow_info[i] past the event buffer. The event is delivered by the nRF70 co-processor firmware in response to a host-initiated power-save GET, so reaching the overflow requires the firmware to emit a malformed or out-of-range event; the trust boundary is host-to-trusted-coprocessor rather than a direct remote-AP write, with over-the-air influence on the flow count being indirect and bounded by the 3-bit TWT flow-id space. Affected: builds with CONFIG_NRF70_STA_MODE on releases through v4.4.0. The fix rejects events with num_twt_flows > WIFI_MAX_TWT_FLOWS or with event_len shorter than the claimed entries, and adds a NULL check on the caller buffer. | CVE Database V5 | ||
| Critical | 9.3 | EPSS 0.7% | CVE-2026-60090MervinPraison PraisonAI · SQL Injection Critical9.3EPSS 0.7%CVE Database V5CVE-2026-60090 # PGVector and Cassandra knowledge stores interpolate vector dimensions into DDL ## Summary The PGVector and Cassandra knowledge-store backends validate SQL/CQL identifiers such as schema, keyspace, and collection names, but still insert the caller-controlled `dimension` argument directly into `CREATE TABLE` vector column declarations. A caller that can influence collection creation dimensions can append SQL/CQL tokens to the generated DDL executed by the database driver. ## Technical Details The affected boundary is the vector-store collection creation API. The shared `KnowledgeStore.create_collection()` contract declares `dimension: int`, but Python type hints are not enforced at runtime. Backends that interpolate that value into DDL must validate the runtime value before constructing SQL/CQL. `src/praisonai/praisonai/persistence/knowledge/pgvector.py` already treats DDL identifier interpolation as security-sensitive: `__init__()` calls `validate_identifier(schema, name="schema")`, and `_table_name()` calls `validate_identifier(collection, name="collection name")` before returning `f"{self.schema}.praison_vec_{collection}"`. However, `PGVectorKnowledgeStore.create_collection()` then executes: ```python cur.execute(f""" CREATE TABLE IF NOT EXISTS {table} ( id VARCHAR(255) PRIMARY KEY, content TEXT, content_hash VARCHAR(64), created_at DOUBLE PRECISION, metadata JSONB, embedding vector({dimension}) ) """) ``` No equivalent type or range check runs on `dimension`. Passing a string such as `3); DROP TABLE tenant_secrets; --` reaches the SQL sent to `cur.execute()`. `src/praisonai/praisonai/persistence/knowledge/cassandra.py` has the same pattern. The constructor validates `keyspace`, and `create_collection()` validates the collection name, but the vector column DDL uses: ```python self._session.execute(f""" CREATE TABLE IF NOT EXISTS {name} ( id text PRIMARY KEY, content text, content_hash text, created_at double, embedding vector<float, {dimension}> ) """) ``` Passing a string such as `3>; DROP TABLE tenant_secrets; --` reaches the CQL sent to `session.execute()`. ## PoV This minimal PoV imports the real backend classes with fake database drivers, records the statements sent to the drivers, and compares a safe integer dimension with a malicious string dimension. It also attempts a malicious collection name as a negative control; current code rejects that name, proving the identifier hardening is active while the vector dimension remains unguarded. ```python #!/usr/bin/env python3 """Local PoV for vector-store dimension DDL interpolation. The script imports PraisonAI's current source with fake PostgreSQL/Cassandra drivers, then records the SQL/CQL sent to the driver cursors. No database server is required; the assertion is that the real classes build executable DDL with an attacker-controlled dimension string. """ from __future__ import annotations import argparse import importlib import json import subprocess import sys import types from pathlib import Path from typing import Any class SqlRecorder: def __init__(self) -> None: self.statements: list[dict[str, Any]] = [] def execute(self, statement: str, params: Any = None) -> None: normalized = "\n".join(line.rstrip() for line in statement.strip().splitlines()) self.statements.append({"statement": normalized, "params": params}) def __enter__(self) -> "SqlRecorder": return self def __exit__(self, *_exc: object) -> None: return None class FakeConnection: def __init__(self, recorder: SqlRecorder) -> None: self.recorder = recorder def cursor(self, *args: Any, **kwargs: Any) -> SqlRecorder: return self.recorder def commit(self) -> None: return None class FakePool: def __init__(self, recorder: SqlRecorder) -> None: self.conn = FakeConnection(recorder) def getconn(self) -> FakeConnection: return self.conn def putconn(self, _conn: FakeConnection) -> None: return None def closeall(self) -> None: return None class FakeCassandraSession: def __init__(self, recorder: SqlRecorder) -> None: self.recorder = recorder self.keyspace: str | None = None def execute(self, statement: str, params: Any = None) -> list[Any]: self.recorder.execute(statement, params) return [] def set_keyspace(self, keyspace: str) -> None: self.keyspace = keyspace class FakeCluster: recorder: SqlRecorder def __init__(self, *_args: Any, **_kwargs: Any) -> None: self.session = FakeCassandraSession(self.recorder) def connect(self) -> FakeCassandraSession: return self.session def shutdown(self) -> None: return None def install_fake_pg_driver(recorder: SqlRecorder) -> None: psycopg2 = types.ModuleType("psycopg2") pool = types.Modul | CVE Database V5 | ||
| Medium | 4.6 | EPSS 0.3% | CVE-2026-10656zephyrproject zephyr · Memory-safety Medium4.6EPSS 0.3%CVE Database V5CVE-2026-10656 The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver thread; between queuing and processing, the endpoint FIFO can be drained by host-controlled control flow — in particular udc_setup_received() drains the EP0 OUT/IN FIFOs whenever a new SETUP packet arrives, and dequeue/disable/purge paths drain it likewise. A USB host that aborts an in-flight EP0 control transfer with a new SETUP packet (legal USB behavior) can therefore cause a stale XFER_OUT_DONE event to be processed against an empty FIFO, producing net_buf_add(NULL, ...), a near-NULL pointer dereference that faults and crashes the device. No authentication is required; the attacker is the USB host the device is connected to (physical bus access). Impact is denial of service (device crash). The defect was introduced when the MAX32 UDC driver was added and shipped in Zephyr v4.4.0. The fix adds NULL-buffer checks that return early with UDC_EVT_ERROR/-ENOBUFS in both the OUT-done and IN-done handlers. EPSS 0.3%Vulnerability | CVE Database V5 | ||
| Medium | 6.3 | EPSS 0.5% | CVE-2026-55223swaldman c3p0 · Deserialization of Untrusted Data Medium6.3EPSS 0.5%CVE Database V5CVE-2026-55223 c3p0 is a JDBC Connection pooling library. In versions prior to 0.14.0, c3p0 in combination with other libraries, can compose to a "sink" for deserialization gadgets. The JDBC spec's DataSource.getConnection() and ConnectionPoolDataSource.getPooledConnection() match the getXXX() form, so JavaBean libraries treat them as "properties" assumed safe while they actually call into JDBC drivers. Attackers can thus craft malicious DataSource objects whose property lookups invoke vulnerable drivers, then smuggle them in serialized form to where an application deserializes and auto-resolves bean properties — triggering the attack. This requires a susceptible DataSource/ConnectionPoolDataSource and JDBC driver on the CLASSPATH, plus a carrier that auto-looks-up JavaBean properties on = deserialization, most commonly a collection paired with an Apache commons-beanutils Comparator that sorts by bean properties. c3p0 supplied that susceptible DataSource/ConnectionPoolDataSource, which was an essential component of the trigger. This issue has been fixed in version 0.14.0. | CVE Database V5 | ||
| –Not rated | – | AlienVault OTX General The Gentlemen ransomware-as-a-service group emerged as a top-10 threat actor in the first half of 2026. The group exploits vulnerabilities in internet-facing devices like VPNs and firewalls, potentially collaborating with initial access brokers. They employ comprehensive reconnaissance using tools like SharpADWS, NetScan, and Advanced IP Scanner, capturing network traffic with netsh. The attackers disable security products through BYOVD techniques using vulnerable drivers, and deploy custom Go-based backdoors and ransomware variants. They spread laterally via GPO deployment and PsExec, encrypt files using Curve25519 and XChaCha20, and recently developed a C-based ransomware variant using AES256-GCM and RSA. The group targets multiple industries worldwide, particularly in Brazil, China, Indonesia, Taiwan, and Thailand, with attacks focusing on manufacturing, IT services, healthcare, and financial sectors. | AlienVault OTX General | |||
| Medium | 5.5 | EPSS 0.1% | Medium5.5EPSS 0.1%GCVE DatabaseCVE-2026-53231 In the Linux kernel, the following vulnerability has been resolved: net: phy: don't try to setup PHY-driven SFP cages when using genphy We don't have support for PHY-driver SFP cages with the genphy code. On top of that, it was found by sashiko that running sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY probing runs under RTNL, which isn't the case for non-genphy drivers. This problem was reproduced, and does lead to a deadlock on RTNL. Before the blamed commit, the phy_sfp_probe() call was made by individual PHY drivers, so there was no way to get to the SFP probing path when using genphy. Let's therefore only run phy_sfp_probe when not using genphy. | GCVE Database | ||
| High | 7.8 | EPSS 0.1% | High7.8EPSS 0.1%GCVE DatabaseCVE-2026-52975 In the Linux kernel, the following vulnerability has been resolved: bonding: 3ad: implement proper RCU rules for port->aggregator syzbot found a data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler [1] which hints at lack of proper RCU implementation. Add __rcu qualifier to port->aggregator, and add proper RCU API. [1] BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0: ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline] bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569 process_one_work kernel/workqueue.c:3302 [inline] process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385 worker_thread+0x58a/0x780 kernel/workqueue.c:3466 kthread+0x22a/0x280 kernel/kthread.c:436 ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1: __bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline] bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881 bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853 rtnl_link_info_fill net/core/rtnetlink.c:906 [inline] rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927 rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168 rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453 rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline] rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495 __dev_notify_flags+0x76/0x390 net/core/dev.c:9790 netif_change_flags+0xac/0xd0 net/core/dev.c:9823 do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180 rtnl_group_changelink net/core/rtnetlink.c:3813 [inline] __rtnl_newlink net/core/rtnetlink.c:3981 [inline] rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109 rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995 netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x563/0x5b0 net/socket.c:2698 ___sys_sendmsg+0x195/0x1e0 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787 x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x0000000000000000 -> 0xffff88813cf5c400 Reported by Kernel Concurrency Sanitizer on: CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full) Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 | GCVE Database | ||
| Medium | 5.5 | EPSS <0.1% | Medium5.5EPSS <0.1%GCVE DatabaseCVE-2026-53037 In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them. | GCVE Database | ||
| Low | 5.5 | EPSS 0.2% | Low5.5EPSS 0.2%GCVE DatabaseCVE-2026-31724 CVE-2026-31724 addresses a lifecycle management issue in the Linux kernel's usb gadget function f_eem. The vulnerability involves the net_device object, which remains after the parent gadget device is destroyed during unbinding, causing dangling sysfs symlinks. The fix uses device_move() to properly reparent the net_device during bind and unbind cycles, ensuring correct sysfs topology and power management. This resolves the issue of stale device references and maintains compatibility with legacy composite drivers. | GCVE Database | ||
| Low | 5.5 | EPSS 0.2% | Low5.5EPSS 0.2%GCVE DatabaseCVE-2026-31722 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the borrowed_net flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | GCVE Database | ||
| Medium | 5.5 | EPSS 0.2% | Medium5.5EPSS 0.2%GCVE DatabaseCVE-2026-31723 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | GCVE Database | ||
| Low | 5.5 | EPSS 0.2% | Low5.5EPSS 0.2%GCVE DatabaseCVE-2026-31725 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | GCVE Database | ||
| High | 5.5 | EPSS 0.1% | High5.5EPSS 0.1%GCVE DatabaseCVE-2026-31691 In the Linux kernel, the following vulnerability has been resolved: igb: remove napi_synchronize() in igb_down() When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9), the XSK buffer pool is destroyed but NAPI polling continues. igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing napi_complete_done() from clearing NAPI_STATE_SCHED. igb_down() calls napi_synchronize() before napi_disable() for each queue vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear, which never happens. igb_down() blocks indefinitely, the TX watchdog fires, and the TX queue remains permanently stalled. napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE. After a full-budget poll, __napi_poll() checks napi_disable_pending(). If set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop that napi_synchronize() cannot. napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible panic caused by Rx traffic arrival while interface is down"). napi_disable() provides stronger guarantees: it prevents further scheduling and waits for any active poll to exit. Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a preceding napi_synchronize() in their down paths. Remove redundant napi_synchronize() call and reorder napi_disable() before igb_set_queue_napi() so the queue-to-NAPI mapping is only cleared after polling has fully stopped. | GCVE Database |
Page 2 of 4 · 1 duplicate CVE record merged