CVE-2026-80995 is a use-after-free vulnerability in the Linux kernel's MCTP (Management Component Transport Protocol) implementation. The flaw occurs because mctp_route_lookup() uses a route device pointer without holding a proper reference, allowing concurrent teardown and leading to a use-after-free condition. This vulnerability can be triggered by an unprivileged local user via the AF_MCTP socket interface without requiring CAP_NET_RAW privileges. The issue is related to improper reference counting and was introduced by a change that moved source address lookup ahead of destination device reference acquisition.
A vulnerability in the Linux kernel's sunrpc subsystem affects the svc_pool_for_cpu() function. When a service runs fewer threads than pools, some pools may have no threads, causing transports routed to these threadless pools to hang indefinitely. The issue is addressed by modifying svc_pool_for_cpu() to skip pools without threads, ensuring work is serviced at the cost of NUMA locality.
In the Linux kernel, the following vulnerability has been resolved: seg6: reset IP6CB after IPv6 decapsulation decap_and_validate() pulls the outer SRv6 headers and makes the inner packet the skb network header. The IPv6 control block still contains values collected while parsing the outer packet, including nhoff and extension-header flags. End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6 input path. An unprivileged user can reach End.DT6 from a user and net namespace by installing a local SID and injecting an outer packet with Hop-by-Hop and Destination Options headers followed by an SRH and a minimal inner IPv6 packet. The outer extension headers leave a large nhoff in IP6CB. After decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the inner packet and reads beyond the skb head. KASAN reports: BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu ip6_protocol_deliver_rcu+0x1118/0x1450 ip6_input_finish+0x11b/0x240 seg6_local_input_core+0xed/0x2e0 lwtunnel_input+0x1e9/0x4e0 ipv6_rthdr_rcv+0x525f/0x6c50 ip6_protocol_deliver_rcu+0xcb7/0x1450 Before clearing IP6CB for an inner IPv6 packet, save its incoming interface index and L3 slave state. Restore both after the clear and set nhoff to the inner IPv6 base-header nexthdr field. Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can replace skb_iif with the L3 master while IP6CB keeps the receiving interface. Preserve IP6SKB_L3SLAVE for the same reason.
The Booktics – Booking Calendar for Appointments and Service Businesses plugin for WordPress is vulnerable to unauthorized modification of data in all versions up to, and including, 1.0.23. This is due to the create_order_permission() permission callback on the POST /wp-json/booktics/v1/orders REST route unconditionally returning true, combined with find_and_update_guest() overwriting an existing customer record's stored name, phone, and wp_user_id whenever the caller-supplied email matches, with no proof of ownership. This makes it possible for unauthenticated attackers to overwrite the contact details (name and phone) of any existing customer whose email address they know, poisoning downstream reminder emails, SMS, calendar invites, and CRM data.
Capgo (capgo.app) fails to restrict direct write access to the public.sso_providers table exposed through Supabase PostgREST. A holder of an ordinary Capgo full API key can insert a row with status='active' and enforce_sso=true, bypassing the intended backend SSO provisioning route (supabase/functions/_backend/private/sso/providers.ts) and its controls: the Enterprise plan requirement, SSO provider creation via the Supabase Management API, DNS TXT domain-ownership verification, the pending_verification → verified → active status transition, and issuance of a trusted provider ID by Supabase Auth. The forged row is trusted by SSO discovery and enforcement logic, including the unauthenticated login preflight endpoint /private/sso/check-domain, which then reports {"has_sso": true, "enforce_sso": true} for domains that were never verified, allowing attacker-controlled SSO enforcement to be asserted for arbitrary domains and disrupting normal login. All versions are affected; at the time of the advisory no patch was available.
Snipe-IT through version 8.6.3 fails to perform object-level authorization in the updateLicense, updateConsumable, updateAccessory, and updateModel endpoints and in the storeModel endpoint for Predefined Kits. The existing check authorizes only the parent Predefined Kit (update on PredefinedKit) and not the child object being attached. As a result, an authenticated user holding only the kits.edit permission can attach a License, Consumable, Accessory, or Asset Model that they are otherwise denied (HTTP 403) from reading directly to a Predefined Kit, and the kit relation index then discloses the attached object's name back to that low-privilege user. This is the update-path and storeModel counterpart to CVE-2026-55478, which fixed only the storeLicense, storeConsumable, and storeAccessory methods in 8.6.2. Note that updateModel was code-vulnerable in 8.6.3 but not reachable in practice because a route-name typo bound the route to a nonexistent controller method, causing HTTP 500 responses. The issue is fixed in Snipe-IT 8.7.0.
Snipe-IT versions >= 7.0.12 and <= 8.6.3 contain an authorization bypass in the Livewire importer component (App\Livewire\Importer, mounted at the imports.index route). The component only checked the broad 'import' ability at mount time, while its files() and activeFile() computed properties queried the imports table with no owner or company scope. As a result, any authenticated non-superuser holding the import permission could view every Import record on the instance (original filename, file_path, filesize, import_type and creation timestamp) and could invoke the selectFile($id) Livewire action with any auto-incrementing Import ID to load another user's record, exposing its stored preview data (header_row column headers and first_row, the first data row of the CSV). Because import CSVs commonly contain personal data, asset serial numbers and license keys, this discloses sensitive information; in Full Multiple Companies Support (FMCS) deployments the disclosure also crosses company/tenant boundaries. Impact is limited to preview data rather than the full CSV file, and superusers were unaffected. Fixed in version 8.7.0, which scopes non-superuser reads to imports owned by the caller.
Snipe-IT versions 8.2.0 through 8.6.x (fixed in 8.7.0) contain an incorrect authorization flaw in app/Http/Controllers/Users/UsersController::update(). The single-user edit route assigned the activated field from the request payload before evaluating the canEditAuthFields authorization gate, so an authenticated non-admin user holding the users.edit permission in the target's company scope can submit a full valid PUT request to /users/{id} and toggle the activated flag on any user, including admin and superuser accounts. Deactivating an admin locks that account out of the application until another admin or superuser re-enables it. Only the activated field is affected; username, email, password and permissions remain protected by the gate, no data is disclosed, and the API (Api\UsersController::update) and bulk-edit paths are not affected.
Snipe-IT versions <= 8.6.3 (fixed in 8.7.0) do not check the return value of storage write operations in ImageUploadRequest::handleImages(). Because Laravel's default disk mode does not throw on failure, a silently failed Storage::disk('public')->put(...) call still caused the application to delete the previous image via deleteExistingImage() and to reassign and persist the model's image reference to the new filename, destroying the existing image and leaving the database row pointing at a file that was never written. A mirror problem existed in deleteExistingImage(), where a failed Storage::delete() still nulled the model's image field, orphaning the file on disk. The condition is not directly attacker-controlled: it is triggered when any legitimate authenticated user submits an image upload while the storage backend transiently fails (for example an S3 network error, a local filesystem permission problem, or quota exhaustion). The result is unrecoverable loss of the prior image and a durable inconsistency between the database and disk that requires manual reconciliation. All models whose controllers route through ImageUploadRequest::handleImages (assets, asset models, users, companies, manufacturers, locations, categories, suppliers, departments, and other image-carrying models) are affected.
Snipe-IT before 8.7.0 contains an authorization bypass vulnerability in Livewire components that enforce authorization only at the route level, not within component lifecycle methods. Attackers with a valid authenticated session can replay signed component snapshots via POST /livewire/update to invoke protected methods and escalate privileges, including creating OAuth clients, minting personal access tokens, and accessing sensitive admin data.
The Next-Cart Store to WooCommerce Migration plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 3.9.8 via the `NCWM_Kitconnect::run()` function. This is due to the plugin registering the `/wp-json/next_cart/v1/migration` REST route with `permission_callback` set to `__return_true` and relying on a hardcoded fallback value of `__token__` in `get_option('nextcart_token', '__token__')` when the `nextcart_token` option has not yet been written to the database. This makes it possible for unauthenticated attackers to bypass authentication to the migration endpoint by supplying the literal string `__token__` as the token, gaining access to privileged handlers that pass attacker-controlled SQL directly to `$wpdb->query()` and `$wpdb->get_results()` — enabling arbitrary SQL execution including administrator account creation — and pass an attacker-controlled path to `unlink()`, enabling arbitrary file deletion and full site takeover. The hardcoded fallback is reachable whenever the `nextcart_token` option has not yet been populated, which occurs after WP-CLI, network, or programmatic plugin activation without a subsequent authenticated `wp-admin` visit, as token generation is deferred to `admin_init` via `register_settings()`.
Maravel PHP framework versions prior to 10.73.1 have a side-channel information disclosure vulnerability. When routes with dynamic placeholders are compiled, literal placeholder syntax can cause a 500 Internal Server Error instead of a 404 Not Found. This behavior allows an attacker to infer internal route parameter names and controller schemas by observing which inputs trigger errors. Version 10.73.1 includes a patch for this issue. A recommended workaround is to implement middleware that rejects requests containing literal brace patterns before routing.
n8n is an open source workflow automation platform. Prior to 2.37.7 and 2.38.2, the /chat WebSocket route accepted a resumeToken and resumed a paused execution without checking that the target node supported chat messages. An anonymous form submitter who received that token could reuse it on the chat route to release a Send-and-Wait, non-chat HITL, or Wait approval gate. The affected authorization logic is packages/cli/src/chat/chat-execution-manager.ts, where canResumeOverChat did not gate the resume target. This issue is fixed in versions 2.37.7 and 2.38.2.
n8n is an open source workflow automation platform. Prior to 1.123.76, 2.37.7, and 2.38.2, the public OIDC login and callback endpoints completed authentication even when OIDC was not the enabled active authentication method. An Enterprise administrator who had configured and later disabled an identity provider still exposed a working route that could issue valid sessions. The affected logic is packages/cli/src/modules/sso-oidc/oidc.service.ee.ts, including generateLoginUrl and the callback flow that lacked assertOidcLoginEnabled. This issue is fixed in versions 1.123.76, 2.37.7 and 2.38.2.
CVE-2026-82754 is an improper protection of alternate path vulnerability in ash-project's ash_authentication_oauth2_server. The OAuth endpoints intended to be accessed under the /oauth prefix are also accessible under the /.well-known prefix due to route forwarding behavior. This allows bypassing security controls such as WAF rules, rate limits, or authentication exemptions that are scoped only to the canonical /oauth prefix. The vulnerability affects versions from 0.1.0 up to but not including 0.3.1.
A flaw was found in odh-dashboard in Red Hat OpenShift AI. The backend-for-frontend route GET /api/nim-serving/:nimResource reads Kubernetes Secrets using the dashboard service account and returns the full Secret object, including .data, without an authorization check. Any authenticated dashboard user can retrieve the cluster NVIDIA NGC API key Secret (apiKeySecret) and the NIM image pull secret (nimPullSecret). Create and delete of the same NIM credential are admin-gated; the read path is not. This is missing authorization (CWE-862) and insufficiently protected credentials (CWE-522). It is distinct from CVE-2026-5483 (service-account token leak in the Kubernetes client response wrapper on the same route) and CVE-2026-16456 (odh-model-controller cross-namespace confused deputy).
Lara Dashboard versions before 1.3.0 contain a critical authentication bypass vulnerability in the screenshot-login route. When the application environment (APP_ENV) is not set to production, unauthenticated attackers can authenticate as any user by email via the GET /screenshot-login/{email} endpoint. This allows attackers to gain full authenticated sessions, granting access to user administration, settings, database contents, and the ability to execute arbitrary code through the module installer.
SurrealDB versions prior to 3.2.0 contain a vulnerability where an authenticated user scoped to one namespace/database can invoke a custom API belonging to another namespace/database by manipulating the URL path. This allows the user to access or modify data in another tenant's scope if the endpoint permissions are permissive. The vulnerability does not allow unauthenticated access or affect single-tenant deployments. Versions 3.2.0 and later include a fix that validates the namespace/database against the caller's authenticated scope, rejecting unauthorized cross-tenant access.