A medium-severity vulnerability has been identified in BeyondTrust Privilege Management for Windows versions <=25.7. Under certain conditions, a local authenticated user with elevated privileges may be able to bypass the product’s anti-tamper protections, which could allow access to protected application components and the ability to modify product configuration.
The unified WEBUI application of the ONT/Beacon device contains an input handling flaw that allows authenticated users to trigger unintended system-level command execution. Due to insufficient validation of user-supplied data, a low-privileged authenticated attacker may be able to execute arbitrary commands on the underlying ONT/Beacon operating system, potentially impacting the confidentiality, integrity, and availability of the device.
Parsec is a cloud-based application for cryptographically secure file sharing. In versions on the 3.x branch prior to 3.6.0, `libparsec_crypto`, a component of the Parsec application, does not check for weak order point of Curve25519 when compiled with its RustCrypto backend. In practice this means an attacker in a man-in-the-middle position would be able to provide weak order points to both parties in the Diffie-Hellman exchange, resulting in a high probability to for both parties to obtain the same shared key (hence leading to a successful SAS code exchange, misleading both parties into thinking no MITM has occurred) which is also known by the attacker. Note only Parsec web is impacted (as Parsec desktop uses `libparsec_crypto` with the libsodium backend). Version 3.6.0 of Parsec patches the issue.
With physical access to the device and enough time an attacker is able to solder test leads to the debug footprint (or use the 6-Pin tag-connect cable). Thus, the attacker gains access to the bootloader, where the kernel command line can be changed. An attacker is able to gain a root shell through this vulnerability.
The exos 9300 application can be used to configure Access Managers (e.g.92xx, 9230 and 9290). The configuration is done in a graphical user interface on the dormakaba exos server. As soon as the save button is clicked in exos 9300, the whole configuration is sent to the selected Access Manager via SOAP. The SOAP request is sent without any prior authentication or authorization by default. Though authentication and authorization can be configured using IPsec for 92xx-K5 devices and mTLS for 92xx-K7 devices, it is not enabled by default and must therefore be activated with additional steps.
This insecure default allows an attacker with network level access to completely control the whole environment. An attacker is for example easily able to conduct the following tasks without prior authentication:
- Re-configure Access Managers (e.g.remove alarming system requirements)
- Freely re-configure the inputs and outputs
- Open all connected doors permanently
- Open all doors for a defined time interval
- Change the admin password
- and many more
Network level access can be gained due to an insufficient network segmentation as well as missing LAN firewalls. Devices with an insecure configuration have been identified to be directly exposed to the internet.
Exos 9300 instances are using a randomly generated database password to connect to the configured MSSQL server. The password is derived from static random values, which are concatenated to the hostname and a random string that can be read by every user from the registry. This allows an attacker to derive the database password and get authenticated access to the central exos 9300 database as the user Exos9300Common. The user has the roles ExosDialog and ExosDialogDotNet assigned, which are able to read most tables of the database as well as update and insert into many tables.
The Infotainment ECU manufactured by Bosch which is installed in Nissan Leaf ZE1 – 2020 uses a Redbend service for over-the-air provisioning and updates. HTTPS is used for communication with the back-end server. Due to usage of the default configuration for the underlying SSL engine, the server root certificate is not verified. As a result, an attacker may be able to impersonate a Redbend backend server using a self-signed certificate.
First identified on Nissan Leaf ZE1 manufactured in 2020.
CVAT is an open source interactive video and image annotation tool for computer vision. In versions 2.2.0 through 2.54.0, an attacker is able to execute arbitrary JavaScript in a victim user's CVAT UI session, provided that they are able to create a maliciously crafted label in a CVAT task or project, then get the victim user to either edit that label, or view a shape that refers to that label; and/or get the victim user to upload a maliciously crafted SVG image when configuring a skeleton. This gives the attacker temporary access to all CVAT resources that the victim user can access. Version 2.55.0 fixes the issue.
5ire is a cross-platform desktop artificial intelligence assistant and model context protocol client. Prior to version 0.15.3, an unsafe option parsing vulnerability in the ECharts Markdown plugin allows any user able to submit ECharts code blocks to execute arbitrary JavaScript code in the renderer context. This can lead to Remote Code Execution (RCE) in environments where privileged APIs (such as Electron’s electron.mcp) are exposed, resulting in full compromise of the host system. Version 0.15.3 patches the issue.
Passing too large an alignment to the memalign suite of functions (memalign, posix_memalign, aligned_alloc) in the GNU C Library version 2.30 to 2.42 may result in an integer overflow, which could consequently result in a heap corruption.
Note that the attacker must have control over both, the size as well as the alignment arguments of the memalign function to be able to exploit this. The size parameter must be close enough to PTRDIFF_MAX so as to overflow size_t along with the large alignment argument. This limits the malicious inputs for the alignment for memalign to the range [1<<62+ 1, 1<<63] and exactly 1<<63 for posix_memalign and aligned_alloc.
Typically the alignment argument passed to such functions is a known constrained quantity (e.g.page size, block size, struct sizes) and is not attacker controlled, because of which this may not be easily exploitable in practice. An application bug could potentially result in the input alignment being too large, e.g.due to a different buffer overflow or integer overflow in the application or its dependent libraries, but that is again an uncommon usage pattern given typical sources of alignments.
Cosign provides code signing and transparency for containers and binaries. Prior to versions 2.6.2 and 3.0.4, Cosign bundle can be crafted to successfully verify an artifact even if the embedded Rekor entry does not reference the artifact's digest, signature or public key. When verifying a Rekor entry, Cosign verifies the Rekor entry signature, and also compares the artifact's digest, the user's public key from either a Fulcio certificate or provided by the user, and the artifact signature to the Rekor entry contents. Without these comparisons, Cosign would accept any response from Rekor as valid. A malicious actor that has compromised a user's identity or signing key could construct a valid Cosign bundle by including any arbitrary Rekor entry, thus preventing the user from being able to audit the signing event. This issue has been patched in versions 2.6.2 and 3.0.4.
Asseco InfoMedica is a comprehensive solution used to manage both administrative and medical tasks in the healthcare sector. Passwords of all users are stored in a database in an encoded format. An attacker in possession of these encoded passwords is able to decode them by using an algorithm embedded in the client-side part of the software.
This vulnerability has been fixed in versions 4.50.1 and 5.38.0
Asseco InfoMedica is a comprehensive solution used to manage both administrative and medical tasks in the healthcare sector. A low privileged user is able to obtain encoded passwords of all other accounts (including main administrator) due to lack of granularity in access control.
Chained exploitation of this vulnerability and CVE-2025-8307 allows an attacker to escalate privileges. This vulnerability has been fixed in versions 4.50.1 and 5.38.0
n8n is an open source workflow automation platform. In versions 0.121.2 and below, an authenticated attacker may be able to execute malicious code using the n8n service. This could result in full compromise and can impact both self-hosted and n8n Cloud instances. This issue is fixed in version 1.121.3. Administrators can reduce exposure by disabling the Git node and limiting access for untrusted users, but upgrading to the latest version is recommended.
A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "The product in question TEW-731RE for CVE-2025-15471 has been discontinued and end of life since October 23, 2020. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on the website product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Versions 3.13.2 and below allow a zip bomb to be used to execute a DoS against the AIOHTTP server. An attacker may be able to send a compressed request that when decompressed by AIOHTTP could exhaust the host's memory. This issue is fixed in version 3.13.3.
In the backup parameters, a user with high privilege is able to concatenate custom instructions to the backup setup. Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Centreon Infra Monitoring (Backup configuration in the administration setup modules) allows OS Command Injection.This issue affects Infra Monitoring: from 25.10.0 before 25.10.2, from 24.10.0 before 24.10.15, from 24.04.0 before 24.04.19.
A vulnerability was found in LigeroSmart up to 6.1.24. This affects an unknown part of the component Environment Variable Handler. Performing a manipulation of the argument REQUEST_URI results in cross site scripting. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 6.1.26 and 6.3 is able to mitigate this issue. The patch is named 264ac5b2be5b3c673ebd8cb862e673f5d300d9a7. The affected component should be upgraded.
A vulnerability was detected in ZKTeco BioTime up to 9.0.3/9.0.4/9.5.2. This affects an unknown part of the file /base/safe_setting/ of the component Endpoint. Performing a manipulation of the argument backup_encryption_password_decrypt/export_encryption_password_decrypt results in unprotected storage of credentials. Remote exploitation of the attack is possible. The exploit is now public and may be used. Upgrading to version 9.0.6 is able to mitigate this issue. It is recommended to upgrade the affected component. The vendor confirms: "The mainstream version ZKBioTime V9.0.6 has fixed this vulnerability. Please update to the latest version as soon as possible. For the Middle East version BioTime 9.5.X, you can contact the local technical support to obtain the fix package."