An out-of-bounds read vulnerability exists in the ESP-IDF BlueDroid L2CAP configuration-option processing in certain versions prior to 5.2.8, 5.3.6, 5.5.5, 6.0.3, and 6.1-rc1. A remote unauthenticated Bluetooth BR/EDR peer can send a malformed L2CAP configuration request causing the ESP32 Bluetooth stack to read beyond buffer boundaries, potentially leaking adjacent memory in the L2CAP Configuration Response. This affects ESP32-class products using the BlueDroid host stack with Classic Bluetooth enabled. The issue is fixed in the specified versions.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.5, 6.0.1, and 6.1, the BlueDroid A2DP sink function btc_a2dp_sink_handle_inc_media() reads a timestamp field from the received media buffer before validating that the packet layout contains the field. A paired BR/EDR audio source within radio range can send a malformed A2DP media packet to a build with BlueDroid Classic Bluetooth and A2DP sink support enabled, causing an out-of-bounds read into adjacent heap memory and limited disclosure of heap contents. Arbitrary memory disclosure and code execution are not established.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. Versions 6.0.1, 5.5.4, 5.4.4, 5.3.5, and possibly prior contain an out-of-bounds write in jpeg_parse_dqt_marker() in components/esp_driver_jpeg/jpeg_parse_marker.c because the attacker-controlled DQT marker Tq nibble is used as an index into the qt_tbl array without validating that it is in the range 0..3, allowing malformed JPEG input to corrupt stack memory and reliably trigger a denial of service. This issue is fixed in version 6.0.2 and is expected to be fixed in versions 5.5.5, 5.4.5, and 5.3.6.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.2.6, 5.3.5, 5.4.4, 5.5.3, and 6.0, an out-of-bounds read exists in the BlueDroid AVRCP vendor-command parser (avrc_pars_vendor_cmd() in components/bt/host/bluedroid/stack/avrc/avrc_pars_tg.c). This issue has been patched in versions 5.2.7, 5.3.6, 5.4.5, 5.5.4, and 6.0.1.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.2.6, 5.3.5, 5.4.4, 5.5.4, and 6.0, a heap buffer overflow exists in the Security Scheme 2 (SRP6a) session-setup path of the protocomm component. The first-phase handler (handle_session_command0() in components/protocomm/src/security/security2.c) trusts the length of a client-supplied protobuf field for the SRP6a username and copies it into a buffer whose size is derived from a narrower destination type. The resulting truncation-versus-copy asymmetry corrupts the heap when an oversized value is supplied. This issue has been patched in versions 5.2.7, 5.3.6, 5.4.5, 5.5.5, and 6.0.1.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.4 and 6.0, several ESP-TEE secure-service wrappers in esp_secure_services.c and esp_secure_services_iram.c validated only some of the caller-supplied pointer arguments, leaving input pointer arguments unchecked. Because the underlying TEE-protected hardware peripherals (e.g., ECC, SHA, SPI) run in RISC-V machine mode (M-mode) with full address-space access, a caller could supply pointers into TEE-exclusive memory as inputs, causing the peripheral to read TEE memory and return results derived from it to the REE. Depending on the wrapper, the result contains raw bytes from TEE memory, a computed function of TEE memory recoverable through repeated calls, or a single bit per call that forms an oracle for incremental disclosure of TEE-resident sensitive data. This issue has been patched in versions 5.5.5 and 6.0.1.
CVE-2026-45328 is a critical vulnerability in the Espressif IoT Development Framework (esp-idf) versions 5.5.4 and 6.0. It involves improper input validation in the esp_tee component, which exposes secure-service wrappers bridging calls from user applications to TEE-protected hardware peripherals and security features. This vulnerability has been patched in versions 5.5.5 and 6.0.1.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.2.7, 5.3.5, 5.4.4, 5.5.4, and 6.0.1, an out-of-bounds read flaw exists in the DHCP server option parser (parse_options() in components/lwip/apps/dhcpserver/dhcpserver.c) shipped with ESP-IDF's lwIP component. The parser walks the BOOTP/DHCP options field without validating that each option's length byte and declared payload length stay within the received packet buffer. A crafted DHCP request can cause the parser to read past the end of the options buffer into adjacent heap memory. The issue affects the DHCP server used by ESP-IDF's SoftAP and any configuration where the device runs as a DHCP server on a local network. This issue has been patched in versions 5.2.8, 5.3.6, 5.4.5, 5.5.5, and 6.0.2.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.2.6, 5.3.5, 5.4.4, 5.5.4, and 6.0, a NULL-pointer dereference exists in the WebSocket subprotocol-negotiation path of the esp_http_server component. While parsing the client-supplied Sec-WebSocket-Protocol request header during the WebSocket handshake, the tokenisation result is dereferenced without a NULL check, so a malformed header value can crash the server before any application-level authentication runs. This issue has been patched in versions 5.2.7, 5.3.6, 5.4.5, 5.5.5, and 6.0.1.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, an out-of-bounds read vulnerability was reported in the BLE ATT Prepare Write handling of the BLE provisioning transport (protocomm_ble). The issue can be triggered by a remote BLE client while the device is in provisioning mode. The transport accumulated prepared-write fragments in a fixed-size buffer but incorrectly tracked the cumulative length. By sending repeated prepare write requests with overlapping offsets, a remote client could cause the reported length to exceed the allocated buffer size. This inflated length was then passed to provisioning handlers during execute-write processing, resulting in an out-of-bounds read and potential memory corruption. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a use-after-free vulnerability was reported in the BLE provisioning transport (protocomm_ble) layer. The issue can be triggered by a remote BLE client while the device is in provisioning mode. The vulnerability occurred when provisioning was stopped with keep_ble_on = true. In this configuration, internal protocomm_ble state and GATT metadata were freed while the BLE stack and GATT services remained active. Subsequent BLE read or write callbacks dereferenced freed memory, allowing a connected or newly connected client to trigger invalid memory acces. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.2, 5.4.3, 5.3.4, 5.2.6, and 5.1.6, a vulnerability exists in the WPS (Wi-Fi Protected Setup) Enrollee implementation where malformed EAP-WSC packets with truncated payloads can cause integer underflow during fragment length calculation. When processing EAP-Expanded (WSC) messages, the code computes frag_len by subtracting header sizes from the total packet length. If an attacker sends a packet where the EAP Length field covers only the header and flags but omits the expected payload (such as the 2-byte Message Length field when WPS_MSG_FLAG_LEN is set), frag_len becomes negative. This negative value is then implicitly cast to size_t when passed to wpabuf_put_data(), resulting in a very large unsigned value. This issue has been patched in versions 5.5.3, 5.4.4, 5.3.5, 5.2.7, and 5.1.7.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, in the avrc_vendor_msg() function of the ESP-IDF BlueDroid AVRCP stack, the allocated buffer size was validated using AVRC_MIN_CMD_LEN (20 bytes). However, the actual fixed header data written before the vendor payload exceeds this value. This totals 29 bytes written before p_msg->p_vendor_data is copied. Using the old AVRC_MIN_CMD_LEN could allow an out-of-bounds write if vendor_len approaches the buffer limit. For commands where vendor_len is large, the original buffer allocation may be insufficient, causing writes beyond the allocated memory. This can lead to memory corruption, crashes, or other undefined behavior. The overflow could be larger when assertions are disabled.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In 5.5.1, 5.4.3, 5.3.4, 5.2.6, 5.1.6, and earlier, when AVRCP is enabled on ESP32, receiving a malformed VENDOR DEPENDENT command from a peer device can cause the Bluetooth stack to access memory before validating the command buffer length. This may lead to an out-of-bounds read, potentially exposing unintended memory content or causing unexpected behavior.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, and 5.3.4, when the ESP32-P4 uses its hardware JPEG decoder, the software parser lacks necessary validation checks. A specially crafted (malicious) JPEG image could exploit the parsing routine and trigger an out-of-bounds array access. This issue has been fixed in versions 5.5.2, 5.4.4, and 5.3.5. At time of publication versions 5.5.2, 5.4.4, and 5.3.5 have not been released but are fixed respectively in commits 4b8f585, c79cb4d, and 34e2726.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. When the ESP32 is in advertising mode, if it receives a connection request containing an invalid Access Address (AA) of 0x00000000 or 0xFFFFFFFF, advertising may stop unexpectedly. In this case, the controller may incorrectly report a connection event to the host, which can cause the application layer to assume that the device has successfully established a connection. This issue has been fixed in versions 5.5.2, 5.4.3, 5.3.5, 5.2.6, and 5.1.7. At time of publication versions 5.5.2, 5.3.5, and 5.1.7 have not been released but are fixed respectively in commits 3b95b50, e3d7042, and 75967b5.
ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. An integer underflow vulnerability has been identified in the ESP-NOW protocol implementation within the ESP Wi-Fi component of versions 5.4.1, 5.3.3, 5.2.5, and 5.1.6 of the ESP-IDF framework. This issue stems from insufficient validation of user-supplied data length in the packet receive function. Under certain conditions, this may lead to out-of-bounds memory access and may allow arbitrary memory write operations. On systems without a memory protection scheme, this behavior could potentially be used to achieve remote code execution (RCE) on the target device. In versions 5.4.2, 5.3.4, 5.2.6, and 5.1.6, ESP-NOW has added more comprehensive validation logic on user-supplied data length during packet reception to prevent integer underflow caused by negative value calculations. For ESP-IDF v5.3 and earlier, a workaround can be applied by validating that the `data_len` parameter received in the RX callback (registered via `esp_now_register_recv_cb()`) is a positive value before further processing. For ESP-IDF v5.4 and later, no application-level workaround is available. Users are advised to upgrade to a patched version of ESP-IDF to take advantage of the built-in mitigation.