The LeRobot library is vulnerable to arbitrary code execution via unsafe dynamic class instantiation in the from_pretrained() method and related paths. When loading a policy's processor configuration from a repository, the library uses the class field within the JSON configuration to dynamically resolve and instantiate Python classes using importlib.import_module() and getattr().
Tornado is a Python web framework and asynchronous networking library. Prior to 6.6.0, Tornado decodes HTTP/1.1 chunked transfer encoding by processing body data that has already arrived without yielding to the event loop. A remote unauthenticated peer can send millions of one-byte chunks to monopolize the process event loop and stall every other connection served by that process, while lowering max_body_size only limits the duration of each request. For handlers that do not use @stream_request_body, retaining each chunk as a separate object can consume roughly twenty times the received body size, and SimpleAsyncHTTPClient has the same event-loop behavior when reading a response from a malicious server. This issue is fixed in version 6.6.0.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap-use-after-free in `PJSIP TCP/SDP` handling by sending a `SIP INVITE` over a connection-oriented transport and disconnecting before Asterisk responds with the `200 OK`. So far, the crash has only been reproduced when Asterisk is built with `Address Sanitizer`, which detects the issue. `Address Sanitizer` is a development tool with significant performance overhead and, according to the maintainer, is not used in production systems. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
A vulnerability was detected in a2aproject a2a-go up to 2.4.0. This affects the function CreateExecutor of the file a2asrv/agentexec.go of the component Push Notification Handler. The manipulation results in information exposure through error message. It is possible to launch the attack remotely. Upgrading to version 2.5.0 mitigates this issue. The patch is identified as f4d588216b0c9520e94d571bab725c38ce23064c. It is recommended to upgrade the affected component.
Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unauthenticated attacker may use reflected cross-site scripting in `phone provisioning HTTP error pages` to retrieve an authorized user's `AMI session cookie` and impersonate that user when `res_phoneprov` is enabled. The Asterisk HTTP web server, Asterisk Manager Interface (AMI), and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to `127.0.0.1` by default even when enabled, and must convince the authorized user to click a malicious link. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3.
Rembg is a tool to remove images background. Prior to 2.0.82, the public /api/remove endpoint passes attacker-controlled extras.sam_model through rembg/commands/s_command.py to rembg/sessions/sam.py, where it is interpolated into SAM filenames and GitHub download URLs passed to pooch.retrieve() without a pinned hash. An unauthenticated attacker can supply a sam_model value combining path traversal with URL fragment syntax to exploit the HTTP request discarding the fragment while the local POSIX path retains it. The first request primes the attacker-selected path tree, and an identical repeated request downloads malicious ONNX encoder and decoder files beside a readable target file. The graphs can load the target through ONNX external data and encode its bytes into the returned PNG mask, disclosing complete files accessible to the rembg process and allowing arbitrary ONNX computation. This issue is fixed in version 2.0.82.
A security vulnerability has been detected in a2aproject a2a-dotnet up to 1.0.0-preview2. The impacted element is the function A2AJsonRpcProcessor.ProcessRequestAsync of the file src/A2A.AspNetCore/A2AJsonRpcProcessor.cs of the component Parser. The manipulation leads to information exposure through error message. It is possible to initiate the attack remotely. Upgrading to version 1.0.0-preview3 is sufficient to resolve this issue. The identifier of the patch is ccbd12b6108a6a8f0fd5d8b4a9ece3c8a94ba1e4. Upgrading the affected component is recommended.
vsomeip, an open source implementation of the SOME/IP automotive communication middleware, contained a memory allocation vulnerability in versions 3.7.3 and below. The vulnerability allows a remote, unauthenticated peer to cause excessive memory allocation by declaring a large message size on a reliable (TCP) endpoint before the actual message bytes are received. This can lead to denial of service by exhausting host memory. The issue was fixed in version 3.7.4 by introducing a default maximum message size limit of 10 MiB.
CVE-2026-116476 is a medium severity race condition vulnerability in the a2aproject a2a-dotnet software, specifically affecting version 1.0.0-preview3. The flaw exists in the TaskProjection.ApplyStatus function of the TaskProjection component. This vulnerability can be exploited remotely without user interaction and requires low privileges. A fix has been proposed via a pull request but has not yet been accepted or released.
Consul-k8s versions 0.42.0 and later are vulnerable to a cross-namespace authorization bypass in component ACL binding rules that may allow an attacker to obtain elevated Consul privileges. This vulnerability (CVE-2026-110720) is fixed in consul-k8s 2.1.0 and 1.8.18.
Routinator runs out of open connections on the HTTP server when many connections are opened but never closed, leaving the HTTP server unavailable. This condition can be triggered maliciously by an attacker by opening a large number of connections to the HTTP server.
This only affects users that make their HTTP or RTR server available to untrusted networks.
Routinator exits when an rsync URI for a file obtained over RRDP contains a path that cannot be stored on disk, such as too long file names, and folder names that overlap with existing file names.
When parsing an AS range in Routinator, if the maximum value of the range is smaller than the minimum value of the range, Routinator will never reach the maximum value and run out of memory.
Routinator stores a newly-retrieved TA certificate via HTTPS in cache without validation, potentially overwriting a known good TA certificate even if validation fails.
When Routinator encounters an RRDP notification file with gaps in the delta entries, it is still accepted and parsed, potentially leading to missing data. If it encounters too many delta entries it may run out of memory.
Routinator runs out of memory when the JSON output is requested many times concurrently. This condition can be triggered maliciously by an attacker by opening a large number of connections to the HTTP server. Additionally Routinator runs into a stack overflow and exits when a payload item with too much metadata is discarded at once.
This only affects users that make their HTTP or RTR server available to untrusted networks.
When Routinator encounters a CRL with many entries, it may hang or run out of memory. If Routinator encounters a CRL file with the wrong encoding, it may exit.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in bPlugins Content Slider Block content-slider-block allows Stored XSS.This issue affects Content Slider Block: from n/a through 3.2.1.
There is s denial of service vulnerability in Esri ArcGIS Server versions 12.0 and prior that may allow a remote, unauthenticated attacker to supply crafted requests that may, under exceptional circumstances, consume all available worker threads and deny service to users. A patch is provided for ArcGIS Server software in General Availability and Extended support status, which includes versions 12.0, 11.5, 11.3, and 11.1. Other versions are in mature or retired status, which are not patch eligible. Users working with unlisted versions are advised to upgrade and apply the patch.
A security vulnerability has been detected in Bdtask Garage 24 Garage Management Software 1.0. This issue affects some unknown processing of the file /edit_profile of the component Profile. The manipulation of the argument first_name/last_name leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.