The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (default 4) independent sessions, each carrying its own key and direction. The AES peripheral, however, has a single chip-global set of key and mode registers, and aes_begin_session() programmed them exactly once, at session start, outside the aes_lock mutex that serialises the transforms. The per-operation handlers aes_ecb_op(), aes_cbc_op() and aes_ctr_op() then ran aes_hal_transform_block() against whatever key and direction the registers happened to hold.
As a result, once a second session is opened with a different key, every subsequent operation on the first session silently uses the second session's key and direction, and no error is reported. Because the key programming happened outside the lock, the correct usage pattern of "each thread does begin, then op, then free on its own session" also races: a second thread's cipher_begin_session() landing between the first thread's begin and its operation makes that operation run under the second thread's key. An attacker who can induce session creation on the device — for example a protocol peer whose connection causes a session key to be installed — can influence which key is resident when a victim operation runs.
The impact is a cryptographic failure rather than memory corruption: data the application believed it was protecting under one key is encrypted or decrypted under another. Where the resident key is one the attacker knows or supplied, the affected plaintext becomes recoverable by that attacker, and the operation's direction (encrypt versus decrypt) can likewise be inverted. Exposure requires an application that holds two or more concurrent sessions with different keys against this driver; no in-tree Zephyr subsystem does so today (the 802.15.4 security layer, which does open two sessions, uses CCM mode, which this driver rejects), so the risk falls on application code that uses the documented multi-session API.
The fix removes all hardware access from aes_begin_session() and reprograms the key and direction at the top of every operation, inside aes_lock, so the chip-global registers can no longer be observed stale by another session.
In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->slc_work could still be queued on the system work queue. An in-flight SDP discovery cannot be cancelled — bt_sdp_discover_cancel() is declared in the public header but has no implementation — so the request stays in the list with its func, pool and uuid pointers zeroed.
The RFCOMM channel passed to bt_hfp_ag_connect() is taken from the peer's own SDP Hands-Free service record in the normal AG flow (bt_sdp_get_proto_param() performs no range validation, and samples/bluetooth/classic/handsfree_ag feeds the value straight through), so a remote BR/EDR device in radio range that advertises an RFCOMM channel outside the valid range 0x01..0x1e deterministically forces bt_rfcomm_dlc_connect() to fail and reach the wipe. Reading the peer's SDP record requires no pairing, and the peer can also trigger the failure by dropping the ACL or racing an RFCOMM DLC on the same DLCI at the right moment.
When the SDP client next advances its request list, sdp_client_discover() dereferences the zeroed parameters — net_buf_alloc(param->pool, …) with a NULL pool and param->uuid->type — and the result-notification paths call through the NULL params->func. Zeroing a linked node also truncates the request list behind a stale tail pointer, and re-arming the freed AG slot re-appends the same node and can produce a self-looping list that hangs the Bluetooth RX thread. The impact is a crash or hang of the Bluetooth stack; the written value is a constant zero at a fixed static address, so no attacker-controlled write is available.
Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_AG that use the Audio Gateway role are affected.
bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire object with (void)memset(new_hf, 0, sizeof(*new_hf)) while that discovery was still outstanding, zeroing the sys_snode_t _node that is still linked in the SDP client's list along with the request's func, uuid and pool pointers, and zeroing the hf->slc_work work item that may already be queued on the system workqueue. The discovery could not be retracted instead: bt_sdp_discover_cancel() is declared in include/zephyr/bluetooth/classic/sdp.h but has no implementation.
The failing branch is reachable with peer-supplied input. The documented use of bt_hfp_hf_connect() is to pass the RFCOMM channel read out of the remote Audio Gateway's SDP record; neither bt_sdp_get_proto_param() nor bt_hfp_hf_connect() range-checks that value, so a remote device advertising an HFP AG record with an RFCOMM channel outside 1-30 makes bt_rfcomm_dlc_connect() return -EINVAL and drives the local device into the wipe. The same branch is reached without any application misuse when the remote peer controls connection timing, for example when the RFCOMM session is in BT_RFCOMM_STATE_DISCONNECTING or the ACL is dropped between object creation and the RFCOMM call.
Once the object has been wiped, the Bluetooth host continues to use it: sdp_client_alloc_buf() dereferences session->param->pool, which is now NULL, and the SDP receive paths call session->param->func() through a null function pointer, neither of which is NULL-checked. Because the wipe also clears hf->acl, the pool slot is considered free and a retry or an incoming HFP connection re-appends the same still-linked list node, turning session->reqs into a self-referential list that the host's list walkers never leave. The result is a fault or an unrecoverable hang in the Bluetooth host thread; the stray indirect call is through an all-zero pointer whose target the attacker does not control, so the practical impact is denial of service.
The fix keeps the object allocated and marks it with a new BT_HFP_HF_FLAG_RELEASING flag, letting bt_hfp_hf_discover_cb() release it once the discovery completes instead of destroying it under the SDP client. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_HF enabled are affected.
The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 temporary interface identifiers (gen_temporary_iid() in subsys/net/ip/ipv6_pe.c) with sys_rand_get(). That API is documented as not cryptographically secure, while both RFCs require this key to be an unpredictable random value of at least 128 bits — the unpredictability of every generated IID rests entirely on it.
Depending on the platform, sys_rand_get() resolves either to a hardware entropy device or, on boards whose entropy driver sets CONFIG_ENTROPY_NEEDS_PRNG, to the non-cryptographic xoshiro128++ generator in subsys/random/random_xoshiro128.c, which keeps a single global 128-bit state shared with every other sys_rand_get() consumer. Many of those consumers put their output directly on the wire (ephemeral source ports, DNS query IDs, CoAP message IDs and tokens, DHCPv6 transaction IDs, WebSocket masking keys), and the xoshiro state transition is invertible, so an observer of a device's traffic can recover the generator state and reconstruct the IID secret key. Additionally, with the entropy-device backend sys_rand_get() silently falls back to k_cycle_get_32() samples when the entropy driver fails, and returns no error, so the key could be derived from the cycle counter without the caller noticing.
With the key known, stable IIDs become directly computable for any prefix (the remaining HMAC inputs — prefix, interface index, interface name, DAD counter — are guessable), and temporary IIDs become linkable after a cheap search over the mixed-in k_uptime_get_32() value. This defeats the properties both features exist to provide: an attacker can track a device across networks and prefixes, and can predict its address inside a /64 without scanning, removing the usual barrier to directly targeting the host. There is no memory-safety, integrity, or availability impact.
The fix generates the key with sys_csrand_get() and aborts IID generation with -EIO when no cryptographic randomness is available, instead of silently deriving addresses from a predictable key. Both CONFIG_NET_IPV6_IID_STABLE and CONFIG_NET_IPV6_PE are experimental and disabled by default; builds using CONFIG_TEST_RANDOM_GENERATOR remain predictable by design, as sys_csrand_get() is deliberately routed back to the test generator there.
The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer.
The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path.
On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations.
The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set.
The defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity — one undirected and one directed at a peer P (the common "directed reconnect to a bonded central while still accepting new centrals" pattern) — a remote initiator whose address maps to P connecting on the undirected set causes the directed set's reservation to be consumed instead. The initiator address is chosen freely by the remote device and is not authenticated at link establishment, so no bonding, pairing or prior relationship is required to trigger the mis-attribution.
The undirected set's own reservation is then stranded: its BT_ADV_ENABLED flag has already been cleared, and le_adv_stop_free_conn() — the only path that returns a reservation to the pool — is reached only for sets that are still enabled, so bt_le_ext_adv_stop() returns early and the object is never released. Each occurrence permanently consumes one CONFIG_BT_MAX_CONN slot until bt_disable() or reboot. In application patterns that restart the directed advertising set after each disconnect, an attacker can repeat the sequence until the pool is exhausted, after which connectable advertising fails with -ENOMEM and the device can no longer accept connections. As a side effect the directed set keeps advertising without a reservation, so a genuine connection on it is dropped by bt_hci_disconnect(). The impact is availability only; no memory corruption or information disclosure results, and configurations with a single advertising set are unaffected.
CVE-2026-116369 is an OS command injection vulnerability in Sunwood-ai-labs github-kanban-mcp-server versions up to 0.4.0. The flaw exists in the handleListIssues function of src/handlers/issue-handlers.ts, where manipulation of the state or labels argument can lead to command injection. The vulnerability can be exploited remotely. Upgrading to version 0.4.1 addresses this issue.
Improper Neutralization of Script-Related HTML Tags in a Web Page (Basic XSS) vulnerability in Magepeople inc. WpEvently mage-eventpress allows Code Injection.This issue affects WpEvently: from n/a through 5.7.9.
Mattermost versions 11.7.0 through 11.7.10 contain an authorization flaw where the API does not properly restrict which built-in roles a team admin can assign to team members. This allows a team admin to grant permissions beyond the configured permission scheme via the update-team-member-roles REST API endpoint. The vulnerability has a low severity rating with limited impact on confidentiality and integrity.
Syncplify Server! versions prior to 8.8.0 contain a path traversal vulnerability due to improper link resolution before file access. This flaw allows attackers who can place symbolic links or directory junctions inside a user's home folder to access files outside the intended virtual filesystem root. The vulnerability arises because confinement checks are performed on the requested path rather than the actual on-disk target of the link, enabling unauthorized file access beyond the home-folder boundary.
A vulnerability in Brotli was discovered where it incorrectly handled certain compressed streams. This flaw could allow a remote attacker to cause a denial of service or execute arbitrary code by providing specially crafted input. The issue affects multiple Ubuntu package versions and has been addressed in updated releases. Users are advised to update to the fixed package versions to mitigate the risk.
Syncplify Server! versions prior to 8.8.0 have an access control bypass vulnerability due to improper resolution of path equivalence. Authenticated SFTP users can bypass per-path permission overrides by exploiting case-insensitive filesystem path resolution and 8.3 short names, allowing unauthorized file uploads and downloads. This vulnerability is fixed in version 8.8.0.
Multiple security vulnerabilities have been identified and fixed in the libxml2 library used in Red Hat Enterprise Linux 9.6 Extended Update Support. These include denial of service, arbitrary code execution via various buffer overflow and use-after-free flaws, data integrity issues due to integer overflow, information disclosure, SSRF, and double-free/use-after-free in Python bindings. The update synchronizes release versions across several RHEL releases and addresses these critical security issues.
CVE-2026-115680 is an out-of-bounds read vulnerability (CWE-125) affecting Arm Keil MDK-Middleware versions 8.0.0 through 8.3.0. The flaw involves DHCPv6 Option processing, which may lead to over-reads of memory and unintended data retransmission. The vulnerability has a medium severity with a CVSS score of 6.5. No public exploits or patches are currently documented.
A heap buffer overflow vulnerability exists in the RainerScript replace() function of the rsyslog daemon, which can lead to a denial of service condition. This issue affects Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions and related variants. Red Hat has issued a security update to address this vulnerability.
A vulnerability was determined in DeepSeek Harness up to 0.2.0-rc.2. This issue affects some unknown processing of the file packages/client/connection/src/browser-auth.ts of the component Browser Auth. This manipulation causes improper authorization. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.
A buffer overflow vulnerability in the Linux kernel's dm-integrity inline mode with large tag sizes has been fixed. The issue occurs because checksum computations use a buffer smaller than the tag size, causing overflow and kernel panic with stack protection enabled. This overflow can only be triggered by root, so it is not considered a security bug.
A vulnerability in the Linux kernel's drm/vc4 driver involves improper handling of the hangcheck timer and job completion work during V3D unbind. The hangcheck timer and job_done_work are not properly stopped or drained before the V3D interrupt is uninstalled and the associated device structure freed. This can lead to timer callbacks accessing freed memory, causing potential use-after-free conditions.