Apache Airflow versions 3.0.0 through 3.3.1 have an insufficient session expiration vulnerability in the Core API logout endpoint. When API clients authenticate using a bearer token in the Authorization header, logging out does not revoke the token, allowing it to remain valid until its configured expiration (default 24 hours). An attacker with a copy of a valid token can maintain access after the victim logs out. This issue is fixed in Apache Airflow 3.3.2.
Apache Airflow versions prior to 3.3.2 have an information exposure vulnerability in the /assets/events API. Authenticated users with asset-read access can enumerate asset events for all DAGs, including those they are not authorized to view, due to missing access control filters. This exposure includes sensitive metadata such as source DAG ID, task ID, run ID, and event timestamps. Pagination and total entry counts also reveal the existence of hidden DAGs. This affects deployments using per-DAG access control without requiring special configuration. The issue is fixed in Apache Airflow 3.3.2 and later.
Apache Airflow versions 3.3.0 and 3.3.1 contain a session fixation vulnerability where the system prioritizes a session cookie over an explicit Authorization Bearer token. This causes the API to authenticate the user based on the cookie rather than the token, leading to principal confusion and inaccurate audit logs. Exploitation requires an attacker to place a valid session cookie in the victim's browser, which is more feasible in environments sharing domains with other applications. The issue is fixed in version 3.3.2.
CVE-2026-75157 is an incorrect authorization vulnerability in Apache Airflow affecting the DELETE endpoints for queued asset events. The endpoints incorrectly check for READ permission on a Dag instead of the required EDIT permission, allowing any authenticated user with read access to delete queued asset events. This can silently suppress asset-triggered scheduling, a state-changing action that should require higher privileges. The issue affects deployments using asset-triggered scheduling where read access is granted more broadly than edit access, which is typical in RBAC setups. The vulnerability is fixed in Apache Airflow version 3.3.2 and later.
Apache Airflow's secrets masker did not mask `var.json` Variable values whose value is a dict in the Rendered Templates UI — the dict value failed an `isinstance(str)` guard — so a secret stored as a JSON Variable and referenced in a template via `var.json` was displayed in cleartext to any user with access to that task's Rendered Templates view. Users are advised to upgrade to apache-airflow 3.3.1 or later, which masks nested Variable values regardless of type.
Apache Airflow's serialization layer reconstructed exception nodes by calling `import_string()` on a class name taken from the serialized blob and instantiating it with arguments from the same blob, with no restriction on what could be imported. An operator's `executor_config` reaches that branch, so a Dag author could place a value there that causes an arbitrary callable to be imported and invoked -- for example `subprocess.check_output`, or `builtins.eval` on the `builtins`-prefixed variant. The code runs in the **Scheduler**, which reconstructs serialized Dags in its normal loop with no request involved, and in the **API server**, on any authenticated read of the Dag such as `GET /api/v2/dags/{dag_id}/details`. Both are components the Airflow security model states must never execute Dag-author code, and both hold the metadata database credentials and the JWT signing secret. No non-default configuration is required. This is a **different sink from CVE-2026-33264**, which covered only the trigger branch of the same deserializer: deployments that upgraded in response to that advisory are still affected through the exception branch and must upgrade again. Users are advised to upgrade to apache-airflow 3.3.1 or later, which restricts the imported class to a subclass of `BaseException`.
Apache Airflow's XCom `GET /api/v2/{...}/xcomEntries/{key}?deserialize=true` endpoint passed a string-literal payload through `BaseXCom.deserialize_value` without the `_check_forbidden_xcom_keys` guard, allowing an authenticated API user with XCom write-and-read access to instantiate arbitrary `airflow.*` classes on the API server (CWE-502). An authenticated user who can write an XCom value and then read it back with `deserialize=true` triggers the unsafe instantiation. Users are advised to upgrade to apache-airflow 3.3.1 or later, which rejects reserved XCom serialization keys submitted as JSON string literals.
Apache Airflow's secrets masker hides values stored under sensitive key names when they are displayed in the UI. The masker's recursion-depth limit did not descend into values nested inside a list, tuple, or set beyond that limit, so an Airflow Variable holding such a deeply-nested value was shown unmasked in the Variables UI. The exposure is limited to the UI: any authenticated user who can see the Variable in the UI can already read its full value through the Variables REST API, so this does not disclose data the user could not otherwise obtain — the masking is a shoulder-surfing defense for the UI, not an access-control boundary.
This is an incomplete-fix follow-up to CVE-2026-42358, whose fix made only the dictionary walk unbounded; lists, tuples, and sets beyond the depth limit remained unmasked in the UI. Deployments that applied the CVE-2026-42358 fix should also upgrade to address this residual case. Upgrade to apache-airflow 3.3.1 or later.
Apache Airflow 3.3.0 moved human-in-the-loop tasks from the triggerer to a new `awaiting_input` task state swept by the scheduler. That sweep deserializes the task instance's `next_kwargs` without an allow-list, so a Dag author — who controls that value through the task execution API — can cause an arbitrary module import and object instantiation inside the scheduler process, or terminate the scheduler job. No non-default configuration is required: the sweep runs unconditionally every 15 seconds, and the default `allowed_deserialization_classes` setting does not cover this code path. Versions before 3.3.0 are not affected, because human-in-the-loop tasks deferred onto the triggerer instead. This is a different code path from CVE-2026-58076, which covers the same unguarded exception-node deserialization reached elsewhere — deployments that applied that fix must upgrade for this issue as well. Users are advised to upgrade to apache-airflow 3.3.1 or later.
Apache Airflow's Task SDK rebuilt a `Callback` object from serialized data by re-running its constructor, which imports the module named by the stored callback path. Because `SyncCallback` is itself an Airflow class it passes the default `allowed_deserialization_classes` allow-list, so tightening that setting does not help. A Dag author — who controls a task instance's `next_kwargs` through the task execution API — can therefore cause an arbitrary module to be imported inside the scheduler process, when the scheduler's `awaiting_input` timeout sweep deserializes that value. No non-default configuration is required; the sweep runs unconditionally. Versions before 3.3.0 are not affected: the class existed, but the scheduler sweep that reaches it did not. This is a separate code path from CVE-2026-58076 and CVE-2026-67260, which cover different gadgets reaching deserialization — applying either of those fixes does not address this one. Users are advised to upgrade to apache-airflow 3.3.1 or later.
Apache Airflow's Config API did not mask team-scoped sensitive configuration values in multi-team deployments. When an administrator has enabled multi-team mode and exposed the Config API, an authenticated Viewer holding only configuration-read access — with no prior access to the secret — could read a team-scoped Celery broker URL, including its embedded credentials, in cleartext, while the equivalent global option was correctly masked. The secrets masker matched only base section and option names and did not normalize team-prefixed sections before the sensitivity check (CWE-200). This is a distinct masker bypass from CVE-2026-48828 and CVE-2026-48892: deployments that upgraded to apache-airflow 3.3.0 to address those issues remain affected by this team-scoped variant. Users are advised to upgrade to apache-airflow 3.3.1 or later, which normalizes team-scoped sections before masking.
Apache Airflow's Backfill API authorized a request against a Dag id supplied by the caller whenever the `backfill_id` path segment failed to parse. The authorization dependency parsed it with `int()` while the route handler parsed it as pydantic's `NonNegativeInt`, which accepts values `int()` rejects (`1.0` coerces to `1`); FastAPI resolves dependencies before endpoint validation, so the two acted on different Dags. An authenticated user holding edit permission on any single Dag could therefore read, pause and cancel backfills belonging to any other Dag, including moving another Dag's queued runs to `failed`. No non-default configuration is required and backfill ids are sequential, so finding a target is trivial. Users are advised to upgrade to apache-airflow 3.3.1 or later, which parses the backfill id with the same type the routes declare.
Apache Airflow wrote Variable values and Connection `extra` contents to the audit log in cleartext when they were submitted through the bulk endpoints (`PATCH /api/v2/variables` and `PATCH /api/v2/connections`). The audit-log masking recognised only top-level request fields, and a bulk request nests its entities two levels below, so no masking was applied to them. Any authenticated user with audit-log read access -- who need not hold Variables or Connections read at all -- could recover those secrets verbatim, and the Connection `extra` copy is stored unencrypted in the log while the connection table encrypts it. The Airflow UI's *Import Variables* action posts to this endpoint, so an ordinary operator import wrote every secret in the file to the log. This is a different code path from CVE-2026-50204: that fix shipped in 3.3.0 and covers the single-entity endpoints only, so deployments that upgraded in response to that advisory remain affected and must upgrade again. Users are advised to upgrade to apache-airflow 3.3.1 or later.
Apache Airflow's Task SDK did not mask the contents of a Variable whose JSON value is a list, so secrets stored in that shape appeared in cleartext in task logs and in the Rendered Templates UI. Masking was applied only when the deserialized value was a string or a dict; a list at the top level matched neither and was returned unmasked. Any authenticated user able to read the logs or rendered templates of a task that references such a Variable could recover the values, with no special configuration required. This is the list-shaped counterpart of CVE-2026-59244, whose fix covered the dict case only, so deployments that upgraded in response to that advisory remain affected and must upgrade again. Users are advised to upgrade to apache-airflow 3.3.1 or later.
Apache Airflow's asset materialization endpoint (`POST /api/v2/assets/{asset_id}/materialize`) and the XCom result check on `wait_dag_run_until_finished` authorized the target Dag without its team, unlike every other authorization site. A team-aware auth manager distinguishes a team-scoped Dag from a global one by that field -- the Keycloak auth manager, for example, checks the `DAG` resource instead of `DAG:<team>` -- so the team-scoped permission that should gate the request was never consulted. In a deployment running multi-team mode with a team-aware auth manager, an authenticated user in one team could trigger Dag runs belonging to another team, supplying their own `dag_run_id` and `conf`, and could read another team's XCom values. Deployments using the FAB auth manager are unaffected, as it has no multi-team support. Users are advised to upgrade to apache-airflow 3.3.1 or later, which resolves the Dag's team at both sites.
Apache Airflow's environment-variable secrets backend resolved a team-scoped Connection or Variable from the wrong team's scope. The guard meant to prevent this only ran when no team scope was supplied, and its pattern could not match a team name containing an underscore, which team names are allowed to contain. When the guard did not apply, the lookup fell through to an unconditional global read that resolved the stored `AIRFLOW_CONN__<TEAM>___<ID>` variable regardless of which team asked. In multi-team mode an authenticated user of one team could therefore have `POST /api/v2/connections/test` resolve another team's Connection and authenticate outward with that team's credentials; the endpoint uses the credentials rather than returning them. Exploitation requires `[core] multi_team` enabled, `[core] test_connection` set to `Enabled` (it ships `Disabled`), team-scoped secrets provisioned as environment variables in the API-server process, and knowledge of the encoded identifier. Redirecting the test at an attacker-controlled host is separately blocked. Users are advised to upgrade to apache-airflow 3.3.1 or later.
A bug in `BaseSerialization.deserialize()` allowed unrestricted `import_string()` of attacker-controlled class paths when the Scheduler / API Server loaded a serialized DAG: a DAG author could embed a malicious trigger into a DAG to gain remote code execution on the API Server / Scheduler process, crossing the Airflow security boundary that DAG-author code must never execute in those processes. Users are advised to upgrade to `apache-airflow` 3.3.0 or later. As a defense-in-depth mitigation, deployments where DAG-author trust is limited can restrict the `[core] allowed_deserialization_classes` config to a narrow allowlist.
In Apache Airflow before 3.3.0, the REST API task-instance detail and list
endpoints returned a deferred task's trigger kwargs without masking. When a
deferred operator passed a secret (for example a provider API key) into its
trigger, any authenticated user with DAG-scoped task-instance read access for
that DAG could read that secret in clear text while the task was deferred.
Users should upgrade to apache-airflow 3.3.0 or later, which masks sensitive
values in trigger kwargs returned by the API.
The Bulk Variables API in Apache Airflow called the redactor without passing the variable's key, so the key-based `should_hide_value_for_key` check (which triggers on secret-suffixed key names like `*_password` / `*_token` / `*_secret`) could not fire for JSON-decodable variable values. An authenticated UI/API user with bulk Variable read permission could retrieve plaintext values from JSON variables whose key would otherwise trigger redaction. Affects deployments that store sensitive values in JSON-typed Airflow Variables under secret-suffixed key names. Users are advised to upgrade to `apache-airflow` 3.3.0 or later (the fix landed on `main` after 3.2.2; no 3.2.x backport).
Before apache-airflow 3.3.0, a user authorized to read one Dag could disclose the source of other Dags co-located in the same source file. `GET /api/v2/dagSources/{dag_id}` — and the equivalent Dag-source view in the UI — returned the entire source file without redacting Dags the caller was not authorized to read, bypassing per-DAG read authorization. Deployments that co-locate multiple Dags in a single file and rely on per-DAG access control to limit source visibility are affected; single-Dag-per-file deployments are not. Upgrade to apache-airflow 3.3.0 or later.