Apache Software Foundation vulnerabilities and threats

Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component. The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component. The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.

Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component. The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header. This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender.

Deserialization of Untrusted Data vulnerability in Apache Camel PQC component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.

Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component. The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADER_QUERY) whose value was the plain string QUERY (and RETURN_LUCENE_DOCS for HEADER_RETURN_LUCENE_DOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURN_LUCENE_DOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURN_LUCENE_DOCS'), then setHeader('QUERY', constant(...)) at the start of the route).

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component. The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input.

Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component. The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy.

Improper Input Validation vulnerability in Apache Camel NATS component. The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default). This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject.

Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component. The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window.

Authentication Bypass by Spoofing vulnerability in Apache IoTDB. Certain Thrift RPC query handlers lack strict validation of the sessionId parameter. An attacker can construct requests with a forged sessionId and, without performing openSession authentication, receive valid query results. This allows authentication bypass and unauthorized reading of time-series data. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue.

Uncontrolled Resource Consumption vulnerability in Apache IoTDB.  Some interface fails to impose reasonable limits on the time span and aggregation interval of the query. An attacker can construct a request with extreme parameters (e.g., a very large time range combined with a minimal interval). This forces the DataNode to build an enormous result set in memory, which exhausts the Java heap and causes the DataNode process to crash. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue.

Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component. JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it. This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.

Apache IoTDB DataNode’s internal RPC interface for creating Trigger instances uses the uploaded Trigger JAR name to build a file path without sufficient validation. If the internal DataNode RPC port is exposed to an untrusted network, an attacker may use path traversal sequences in the JAR name to write files outside the intended Trigger installation directory. This could allow arbitrary file write with the permissions of the IoTDB process. This issue affects Apache IoTDB: from 1.3.3 before 2.0.8. Users are recommended to upgrade to version 2.0.8, which fixes the issue.

Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200). This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write.

Improper Input Validation vulnerability in Apache Camel AWS SNS component. The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.

Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component. The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains. This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.

Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component. The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.

Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component. The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.

Improper Input Validation vulnerability in Apache Camel Cometd Component. The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish.