Search: ye.call

Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.35.5, Vaultwarden allows an unconfirmed organization owner to purge the entire organization vault. The organization invite flow uses a two-step process: accepting an invite transitions membership from Invited to Accepted, and a separate confirmation by an existing owner upgrades it to Confirmed. The POST /api/ciphers/purge endpoint uses plain Headers and only checks that the membership type is Owner without verifying that the membership status is Confirmed. An authenticated user who has been invited as an organization owner and has accepted the invite and has not yet been confirmed can call this endpoint to hard-delete all ciphers and attachments in the organization, causing immediate organization-wide data loss. This vulnerability is fixed in 1.35.5.

Security researchers gained direct access to Doko's Panel, a real-time phishing platform used in criminal campaigns by ShinyHunters and BlackFile groups. The investigation revealed four distinct infrastructure clusters operating independently customized variants of the tooling. Attacks combine voice phishing with adversary-in-the-middle techniques targeting enterprise identity providers like Okta, Microsoft, and Google, as well as cryptocurrency exchanges. Operators call victims impersonating IT helpdesk staff, directing them to combosquatted domains where credentials and MFA tokens are manually relayed in real-time. Confirmed breaches include SoundCloud (30M records), Match Group (10M records), Betterment (20M records), and Crunchbase. Over 400 domains have been identified linked to these operations. Evidence shows extensive use of AI language models in developing phishing infrastructure, with operators leveraging legitimate services to rapidly deploy and rotate attack infrastructure.

### Impact When `n8n-mcp` runs in HTTP transport mode, authenticated MCP `tools/call` requests had their full arguments and JSON-RPC params written to server logs by the request dispatcher and several sibling code paths before any redaction. When a tool call carries credential material — most notably `n8n_manage_credentials.data` — the raw values can be persisted in logs. In deployments where logs are collected, forwarded to external systems, or viewable outside the request trust boundary (shared log storage, SIEM pipelines, support/ops access), this can result in disclosure of: - bearer tokens and OAuth credentials sent through `n8n_manage_credentials` - per-tenant API keys and webhook auth headers embedded in tool arguments - arbitrary secret-bearing payloads passed to any MCP tool The issue requires authentication (`AUTH_TOKEN` accepted by the server), so unauthenticated callers cannot trigger it; the runtime exposure is also reduced by an existing console-silencing layer in HTTP mode, but that layer is fragile and the values are still constructed and passed into the logger. The fix removes the leak at the source. Impact category: **CWE-532** (Insertion of Sensitive Information into Log File). CVSS 3.1 score: **4.3 Medium** (`AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N`). ### Affected Deployments running n8n-mcp **v2.47.12 or earlier** in HTTP transport mode (`MCP_MODE=http`). The stdio transport short-circuits the relevant log calls and is not affected in practice. ### Patched **v2.47.13** and later. - npm: `npx n8n-mcp@latest` (or pin to `>= 2.47.13`) - Docker: `docker pull ghcr.io/czlonkowski/n8n-mcp:latest` The patch routes tool-call arguments through a metadata-only summarizer (`summarizeToolCallArgs`) that records type, top-level key names, and approximate size — never values. The same pattern was adopted earlier for HTTP request bodies in GHSA-pfm2-2mhg-8wpx. ### Workarounds If developers cannot upgrade immediately: - Restrict access to the HTTP port (firewall, reverse proxy, or VPN) so only trusted clients can authenticate. - Restrict access to server logs (no shared SIEM ingestion, no support read-only access) until the upgrade lands. - Switch to stdio transport (`MCP_MODE=stdio`, the default for CLI invocation), which has no HTTP surface and short-circuits the affected log calls. ### Credit n8n-MCP thanks [@Mirr2](https://github.com/Mirr2) (Organization / Jormungandr) for reporting this issue.

CVE-2026-43438 is a high-severity vulnerability in the Linux kernel's sched_ext subsystem involving an unbalanced reference count operation. The issue arises from a redundant call to css_put() in the scx_cgroup_init() function, which leads to a reference count underflow and a potential Use-After-Free (UAF) condition. This occurs because the iterator css_for_each_descendant_pre() does not increment reference counts on the css structs it yields, yet css_put() is called as if it should release a reference. Removing this redundant css_put() call prevents the UAF vulnerability.

LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From version 1.80.5 to before version 1.83.7, the POST /prompts/test endpoint accepted user-supplied prompt templates and rendered them without sandboxing. A crafted template could run arbitrary code inside the LiteLLM Proxy process. The endpoint only checks that the caller presents a valid proxy API key, so any authenticated user could reach it. Depending on how the proxy is deployed, this could expose secrets in the process environment (such as provider API keys or database credentials) and allow commands to be run on the host. This issue has been patched in version 1.83.7.

CVE-2025-47408 is a high-severity vulnerability in Qualcomm Snapdragon components where memory corruption can occur if another driver issues an IOCTL call with invalid input or output buffers. This issue involves untrusted pointer dereference, classified under CWE-822. The vulnerability affects multiple Snapdragon platforms and related components. No official patch or remediation guidance has been provided yet, and there are no known exploits in the wild. The vulnerability has a CVSS score of 7.8, indicating a significant impact on confidentiality, integrity, and availability if exploited.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Address thermal zone removal races with resume Since thermal_zone_pm_complete() and thermal_zone_device_resume() re-initialize the poll_queue delayed work for the given thermal zone, the cancel_delayed_work_sync() in thermal_zone_device_unregister() may miss some already running work items and the thermal zone may be freed prematurely [1]. There are two failing scenarios that both start with running thermal_pm_notify_complete() right before invoking thermal_zone_device_unregister() for one of the thermal zones. In the first scenario, there is a work item already running for the given thermal zone when thermal_pm_notify_complete() calls thermal_zone_pm_complete() for that thermal zone and it continues to run when thermal_zone_device_unregister() starts. Since the poll_queue delayed work has been re-initialized by thermal_pm_notify_complete(), the running work item will be missed by the cancel_delayed_work_sync() in thermal_zone_device_unregister() and if it continues to run past the freeing of the thermal zone object, a use-after-free will occur. In the second scenario, thermal_zone_device_resume() queued up by thermal_pm_notify_complete() runs right after the thermal_zone_exit() called by thermal_zone_device_unregister() has returned. The poll_queue delayed work is re-initialized by it before cancel_delayed_work_sync() is called by thermal_zone_device_unregister(), so it may continue to run after the freeing of the thermal zone object, which also leads to a use-after-free. Address the first failing scenario by ensuring that no thermal work items will be running when thermal_pm_notify_complete() is called. For this purpose, first move the cancel_delayed_work() call from thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent new work from entering the workqueue going forward. Next, switch over to using a dedicated workqueue for thermal events and update the code in thermal_pm_notify() to flush that workqueue after thermal_pm_notify_prepare() has returned which will take care of all leftover thermal work already on the workqueue (that leftover work would do nothing useful anyway because all of the thermal zones have been flagged as suspended). The second failing scenario is addressed by adding a tz->state check to thermal_zone_device_resume() to prevent it from re-initializing the poll_queue delayed work if the thermal zone is going away. Note that the above changes will also facilitate relocating the suspend and resume of thermal zones closer to the suspend and resume of devices, respectively.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io() In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring the F2FS_WB_CP_DATA counter to zero, unblocking f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount CPU. The unmount path then proceeds to call f2fs_destroy_page_array_cache(sbi), which destroys sbi->page_array_slab via kmem_cache_destroy(), and eventually kfree(sbi). Meanwhile, the bio completion callback is still executing: when it reaches page_array_free(sbi, ...), it dereferences sbi->page_array_slab — a destroyed slab cache — to call kmem_cache_free(), causing a use-after-free. This is the same class of bug as CVE-2026-23234 (which fixed the equivalent race in f2fs_write_end_io() in data.c), but in the compressed writeback completion path that was not covered by that fix. Fix this by moving dec_page_count() to after page_array_free(), so that all sbi accesses complete before the counter decrement that can unblock unmount. For non-last folios (where atomic_dec_return on cic->pending_pages is nonzero), dec_page_count is called immediately before returning — page_array_free is not reached on this path, so there is no post-decrement sbi access. For the last folio, page_array_free runs while the F2FS_WB_CP_DATA counter is still nonzero (this folio has not yet decremented it), keeping sbi alive, and dec_page_count runs as the final operation.

An Android malware campaign masquerading as a bank KYC verification application targets users in India through WhatsApp distribution. The threat operates as a multi-stage dropper installing secondary payloads while establishing persistent command-and-control communication. It combines native code obfuscation, Firebase-based remote execution, VPN-based traffic manipulation, and WebView-based phishing to systematically harvest sensitive user data. The infection chain progresses through deceptive update screens, VPN activation, silent APK installation, and extensive permission abuse. The deployed payload enables SMS interception, call control, USSD execution, and structured credential theft through staged phishing interfaces mimicking legitimate banking workflows. Exfiltrated data is encrypted locally and transmitted to jsonapi.biz, while critical configuration values are hidden inside native libraries to hinder detection.

Malware#india targeting#android banking trojanIndia

In the Linux kernel, the following vulnerability has been resolved: igb: remove napi_synchronize() in igb_down() When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9), the XSK buffer pool is destroyed but NAPI polling continues. igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing napi_complete_done() from clearing NAPI_STATE_SCHED. igb_down() calls napi_synchronize() before napi_disable() for each queue vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear, which never happens. igb_down() blocks indefinitely, the TX watchdog fires, and the TX queue remains permanently stalled. napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE. After a full-budget poll, __napi_poll() checks napi_disable_pending(). If set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop that napi_synchronize() cannot. napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible panic caused by Rx traffic arrival while interface is down"). napi_disable() provides stronger guarantees: it prevents further scheduling and waits for any active poll to exit. Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a preceding napi_synchronize() in their down paths. Remove redundant napi_synchronize() call and reorder napi_disable() before igb_set_queue_napi() so the queue-to-NAPI mapping is only cleared after polling has fully stopped.

In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so that the device is initialized and thus the release function pointer is properly set before it can be used. This was found by Claude while reviewing another EDAC patch.

A vulnerability was found in vLLM up to 0.19.0. The affected element is the function has_mamba_layers of the file vllm/v1/kv_cache_interface.py of the component KV Block Handler. Performing a manipulation results in uninitialized resource. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is described as difficult. The exploit has been made public and could be used. The existence of this vulnerability is still disputed at present. The proposed patch did not fix the issue. A 3rd party explains: "The divergence could be explained by a benign and expected vLLM behavior where vLLM server could group concurrent requests together resulting in different input shapes based on varying request arrival time. The differences in grouped input shapes could call different kernels with could produce difference results due to rounding and differences in order of operations. There is an environment variable VLLM_BATCH_INVARIANT=1 for users that desire to have deterministic output with temperature 0.0."

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup Disable the delayed work before clearing BAR mappings and doorbells to avoid running the handler after resources have been torn down. Unable to handle kernel paging request at virtual address ffff800083f46004 [...] Internal error: Oops: 0000000096000007 [#1] SMP [...] Call trace: epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P) process_one_work+0x154/0x3b0 worker_thread+0x2c8/0x400 kthread+0x148/0x210 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix key reference count leak from call->key When creating a client call in rxrpc_alloc_client_call(), the code obtains a reference to the key. This is never cleaned up and gets leaked when the call is destroyed. Fix this by freeing call->key in rxrpc_destroy_call(). Before the patch, it shows the key reference counter elevated: $ cat /proc/keys | grep afs@54321 1bffe9cd I--Q--i 8053480 4169w 3b010000 1000 1000 rxrpc afs@54321: ka $ After the patch, the invalidated key is removed when the code exits: $ cat /proc/keys | grep afs@54321 $

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat A use-after-free / refcount underflow is possible when the heartbeat worker and intel_engine_park_heartbeat() race to release the same engine->heartbeat.systole request. The heartbeat worker reads engine->heartbeat.systole and calls i915_request_put() on it when the request is complete, but clears the pointer in a separate, non-atomic step. Concurrently, a request retirement on another CPU can drop the engine wakeref to zero, triggering __engine_park() -> intel_engine_park_heartbeat(). If the heartbeat timer is pending at that point, cancel_delayed_work() returns true and intel_engine_park_heartbeat() reads the stale non-NULL systole pointer and calls i915_request_put() on it again, causing a refcount underflow: ``` <4> [487.221889] Workqueue: i915-unordered engine_retire [i915] <4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0 ... <4> [487.222707] Call Trace: <4> [487.222711] <TASK> <4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915] <4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915] <4> [487.223566] __engine_park+0xb9/0x650 [i915] <4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915] <4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915] <4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915] <4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915] <4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915] <4> [487.226178] i915_request_retire+0x1c/0x40 [i915] <4> [487.226625] engine_retire+0x122/0x180 [i915] <4> [487.227037] process_one_work+0x239/0x760 <4> [487.227060] worker_thread+0x200/0x3f0 <4> [487.227068] ? __pfx_worker_thread+0x10/0x10 <4> [487.227075] kthread+0x10d/0x150 <4> [487.227083] ? __pfx_kthread+0x10/0x10 <4> [487.227092] ret_from_fork+0x3d4/0x480 <4> [487.227099] ? __pfx_kthread+0x10/0x10 <4> [487.227107] ret_from_fork_asm+0x1a/0x30 <4> [487.227141] </TASK> ``` Fix this by replacing the non-atomic pointer read + separate clear with xchg() in both racing paths. xchg() is a single indivisible hardware instruction that atomically reads the old pointer and writes NULL. This guarantees only one of the two concurrent callers obtains the non-NULL pointer and performs the put, the other gets NULL and skips it. (cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42)

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Initialize free_qp completion before using it In irdma_create_qp, if ib_copy_to_udata fails, it will call irdma_destroy_qp to clean up which will attempt to wait on the free_qp completion, which is not initialized yet. Fix this by initializing the completion before the ib_copy_to_udata call.

FreeScout is a free self-hosted help desk and shared mailbox. Versions prior to 1.8.213 have a Server-Side Request Forgery (SSRF) vulnerability in the IMAP/SMTP connection test functionality of FreeScout's `MailboxesController`. Three AJAX actions `fetch_test` (line 731), `send_test` (line 682), and `imap_folders` (line 773) in `app/Http/Controllers/MailboxesController.php` pass admin-configured `in_server`/`in_port` and `out_server`/`out_port` values directly to `fsockopen()` via `Helper::checkPort()` and to IMAP/SMTP client connections with zero SSRF protection. There is no IP validation, no hostname restriction, no blocklist of internal ranges, and no call to the project's own `sanitizeRemoteUrl()` or `checkUrlIpAndHost()` functions. The validation block in `connectionIncomingSave()` is entirely commented out. An authenticated admin can configure a mailbox's IMAP or SMTP server to point at any internal host and port, then trigger a connection test. The server opens raw TCP connections (via `fsockopen()`) and protocol-level connections (via IMAP client or SMTP transport) to the attacker-specified target. The response differentiates open from closed ports, enabling internal network port scanning. When the IMAP client connects to a non-IMAP service, the target's service banner or error response is captured in the IMAP debug log and returned in the AJAX response's `log` field, making this a semi-blind SSRF that enables service fingerprinting. In cloud environments, the metadata endpoint at `169[.]254[.]169[.]254` can be probed and partial response data may be leaked through protocol error messages. This is distinct from the `sanitizeRemoteUrl()` redirect bypass (freescout-3) -- different code path, different root cause, different protocol layer. Version 1.8.213 patches the vulnerability.

Use-after-free (UAF) was possible in the `lzma.LZMADecompressor`, `bz2.BZ2Decompressor`, and `gzip.GzipFile` when a memory allocation fails with a `MemoryError` and the decompression instance is re-used. This scenario can be triggered if the process is under memory pressure. The fix cleans up the dangling pointer in this specific error condition. The vulnerability is only present if the program re-uses decompressor instances across multiple decompression calls even after a `MemoryError` is raised during decompression. Using the helper functions to one-shot decompress data such as `lzma.decompress()`, `bz2.decompress()`, `gzip.decompress()`, and `zlib.decompress()` are not affected as a new decompressor instance is used per call. If the decompressor instance is not re-used after an error condition, this usage is similarly not vulnerable.