Search: genuine-check.com
18 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Medium | 5.3 | EPSS 0.2% | Medium5.3EPSS 0.2%CVE Database V5CVE-2026-111957 The SUMIT Payment Gateway for WooCommerce WordPress plugin before 4.0.0 does not bind the payment it confirms with the provider to the order being completed, nor check the payment amount against the order total, allowing unauthenticated users to mark a pending order as paid by replaying a payment identifier obtained from any single genuine payment. | CVE Database V5 | ||
| Medium | 5.1 | EPSS 0.2% | CVE-2026-113357tester-army @e2e-dev/github · Incorrect Authorization Medium5.1EPSS 0.2%CVE Database V5CVE-2026-113357 @e2e-dev/github before 0.4.1 contains an improper authorization vulnerability that allows pull request commenters to hijack CI test reports by posting comments with the predictable marker. Because findComment and upsertComment in post.ts never check the comment author, attackers can receive results in their own comment and edit failures to passes, or suppress genuine reports entirely. EPSS 0.2%Vulnerability | CVE Database V5 | ||
| High | – | EPSS 0.2% | HighEPSS 0.2%CVE Database V5CVE-2026-98741 A vulnerability in the Linux kernel ALSA ua101 driver allows mismatched capture and playback packet sizes to cause out-of-bounds memory writes during PCM node open operations. This occurs because the driver does not properly cross-check wMaxPacketSize and bNrChannels between capture and playback endpoints, leading to buffer overflows. Genuine UA-101/UA-1000 hardware is unaffected as it declares proportional packet sizes. The issue has been fixed in several Linux kernel commits. EPSS 0.2%Vulnerability | CVE Database V5 | ||
| –Not rated | – | AlienVault OTX General An investigation reveals that placeholder domains commonly used in documentation are serving malicious content through advertising chains. Two domains, yoursite[.]com and your-domain[.]com, present in hundreds of thousands of GitHub files and agent skills, use cloaking techniques to display scams specifically to macOS visitors while showing legitimate parking pages to others. The scams include fake MacOS Security Center warnings and counterfeit news articles promoting investment schemes. These attacks leverage affiliate fraud models, funneling victims through multiple redirectors to genuine services like McAfee subscriptions to earn commissions. Static security checks fail to detect these threats because malicious redirects occur after JavaScript execution. This follows an earlier disclosure about third-party[.]com serving ClickFix lures. The widespread citation of unregistered placeholder domains in documentation creates significant exposure, particularly for AI agents that fetch and act on this content. | AlienVault OTX General | |||
| Critical | 9.8 | EPSS 0.6% | CVE-2026-86863pgAdmin 4 · Authentication Bypass by Spoofing Critical9.8EPSS 0.6%CVE Database V5CVE-2026-86863 pgAdmin 4's Webserver authentication source is intended to accept an identity asserted by the web server or reverse proxy in front of pgAdmin, delivered through the WSGI/CGI environment. WebserverAuthentication.get_user() read config.WEBSERVER_REMOTE_USER from request.environ and, when that returned nothing, fell back to reading the same name directly from the inbound HTTP request headers via request.headers.get(). An inbound HTTP header is written by whoever sends the request, so any client able to reach pgAdmin could supply that header itself and be authenticated as any username it named, including an existing Administrator, without presenting a password or any other credential. The environment lookup could also be satisfied by a client-supplied header whenever WEBSERVER_REMOTE_USER was configured to an HTTP_-prefixed or hyphenated name such as HTTP_X_FORWARDED_USER or X-Forwarded-User, since WSGI servers place inbound headers into the environment under exactly those names. Deployments are affected only when 'webserver' is enabled in AUTHENTICATION_SOURCES. The fix distinguishes a genuine CGI/WSGI variable from a header-derived one and implicitly trusts only the former. A header-asserted identity is now accepted only when the operator explicitly opts in via WEBSERVER_REMOTE_USER_FROM_HEADER, the request arrives from a peer listed in WEBSERVER_TRUSTED_PROXIES, and, when configured, a shared secret supplied in WEBSERVER_SHARED_SECRET_HEADER matches WEBSERVER_SHARED_SECRET under a constant-time comparison. The trusted-peer check deliberately reads the real socket peer address rather than request.remote_addr, because ProxyFix rewrites the latter from the client-controlled X-Forwarded-For header and would otherwise allow an attacker to claim to be the trusted proxy. As defence in depth, login() now refuses any account whose auth_source is not 'webserver', so a misconfigured trust gate cannot be used to assume an internal or LDAP account. This issue affects pgAdmin 4: from 6.2 before 9.18. | CVE Database V5 | ||
| Medium | – | EPSS 0.2% | MediumEPSS 0.2%GCVE DatabaseCVE-2026-80973 In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: bound the MIDI event length from the device usb6fire_comm_receiver_handler() forwards a MIDI event using a length byte the device supplies, with no bound and no check that the transfer delivered that many bytes: if (!urb->status) { if (rt->receiver_buffer[0] == 0x10) /* midi in event */ if (midi_rt) midi_rt->in_received(midi_rt, rt->receiver_buffer + 2, rt->receiver_buffer[1]); } receiver_buffer is a 64-byte kzalloc() buffer (COMM_RECEIVER_BUFSIZE), so only 62 bytes follow the two-byte header. receiver_buffer[1] is a u8 the device chooses, so a device that answers with 0x10 and a length of 0xFF makes snd_rawmidi_receive() read 255 bytes starting two bytes into a 64-byte object. The bytes past the buffer are handed to userspace through the rawmidi read path. urb->actual_length is not consulted either, so a short transfer leaves both the type byte and the length byte at their previous values and the handler acts on stale data. The receiver URB is submitted from usb6fire_comm_init() at probe, so the read happens on plug with no user action; forwarding to userspace also needs a MIDI input substream open, since usb6fire_midi_in_received() only calls snd_rawmidi_receive() when rt->in is set. KASAN on 7.2.0-rc5 (arm64), single packet from an emulated device: BUG: KASAN: slab-out-of-bounds in snd_rawmidi_receive Read of size 255 at addr ffff000009f64682 by task bash/183 __asan_memcpy snd_rawmidi_receive usb6fire_midi_in_received [snd_usb_6fire] usb6fire_comm_receiver_handler [snd_usb_6fire] Allocated by task 11: usb6fire_comm_init [snd_usb_6fire] usb6fire_chip_probe [snd_usb_6fire] The buggy address is located 2 bytes inside of allocated 64-byte region [ffff000009f64680, ffff000009f646c0) Reject the event when the length exceeds the bytes that follow the header, and require the transfer to have delivered the header plus that many bytes. The receiver URB is submitted with a 64-byte transfer_buffer_length, so a genuine device cannot deliver an event longer than those 62 bytes and nothing valid is dropped. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | GCVE Database | ||
| Medium | 5.3 | EPSS 0.3% | Medium5.3EPSS 0.3%CVE Database V5CVE-2026-81424 The Accept Stripe Payments WordPress plugin before 2.1.4 does not verify that the product fulfilled when a checkout is completed matches the product the authoritative payment was actually made for, checking only that the amount paid is at least the referenced product's price, allowing unauthenticated attackers who complete a genuine payment to obtain fulfilment for a different, equal- or lower-priced product than the one they paid for. | CVE Database V5 | ||
| Medium | 5.3 | EPSS 0.3% | CVE-2026-84379pydantic httpx2 · CRLF Injection Medium5.3EPSS 0.3%CVE Database V5CVE-2026-84379 ### Summary HTTPX2 serializes the per-file `Content-Type` and custom headers supplied through the `files=` tuple API directly into the `multipart/form-data` body without validating custom header names or values. An attacker who can influence upload metadata passed to HTTPX2 can use CR or LF characters to terminate a multipart part header and inject additional part headers or end the part header block early. ### Details The three-element file tuple accepts `(filename, content, content_type)`, and the four-element form accepts `(filename, content, content_type, headers)`. `FileField.render_headers()` interpolates the supplied header names and values between CRLF delimiters without validating them. For example: ```python import httpx2 request = httpx2.Request( "POST", "https://example.com/upload", headers={"Content-Type": "multipart/form-data; boundary=BOUNDARY"}, files={ "file": ( "safe.txt", b"payload", "text/plain\r\nX-Injected: true", ) }, ) print(request.read().decode()) ``` The generated body contains an attacker-injected part header: ```text --BOUNDARY Content-Disposition: form-data; name="file"; filename="safe.txt" Content-Type: text/plain X-Injected: true payload --BOUNDARY-- ``` The same issue affects names and values in the custom header mapping from the four-element tuple. Field names and filenames are serialized through a separate escaping path and do not permit CRLF header injection. ### Impact Applications are affected when they pass attacker-controlled upload metadata into the per-file `content_type` or custom `headers` arguments. The receiving server interprets injected lines as genuine multipart part headers. Depending on how that server validates and processes uploads, this can alter part semantics or bypass checks based on part headers. This does not split the outer HTTP request: the injected headers are contained within the multipart body. The concrete security impact therefore depends on the downstream multipart parser and application behavior. ### Mitigation Upgrade to HTTPX2 `2.11.0` or later. Patched versions reject forbidden control characters in multipart part header names and values and raise `ValueError` before serializing the request. If upgrading is not immediately possible, applications should validate custom multipart header names as HTTP field-name tokens. They should reject NUL, CR, LF, other C0 controls except horizontal tab, and DEL in per-file content types and custom header values before passing them to HTTPX2. | CVE Database V5 | ||
| High | 7.1 | EPSS 0.2% | High7.1EPSS 0.2%CVE Database V5CVE-2026-58262 Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.20, header signature verification counts the unused padding bits of the PubKeysBitmap toward the two-thirds validator quorum. These padding bits do not correspond to any validator and are ignored by the actual BLS aggregate-signature check, so a malicious or compromised block producer can set them to reach the required quorum while gathering fewer genuine validator signatures than the protocol demands. As a result, nodes that import or intercept the header accept it as correctly signed without a real two-thirds quorum, weakening consensus safety and undermining finality. This issue is fixed in version 1.7.20. | CVE Database V5 | ||
| –Not rated | – | Microsoft Security Blog In this article Activity overview How ClickFix works Campaign overview ClickFix moved from open pages to fingerprinting gates The fingerprinting gate Mitigation and protection guidance Indicators of compromise (IOC) References Learn more Microsoft Threat Intelligence observed a macOS ClickFix campaign distributing infostealers, including MacSync and Atomic Stealer (AMOS) , through a large cluster of look-alike domains. The campaign evolved from broadly serving ClickFix lures to using a server-side browser-fingerprinting gate that shows the lure primarily to visitors whose environment appears consistent with a genuine macOS browser. This cloaking limits visibility for crawlers, sandboxes, and some automated analysis workflows. The blog details the domain pattern, fingerprinting checks, infection chain, detection coverage, and hunting pivots that defenders can use to identify related activity. Activity overview Microsoft Threat Intelligence has been tracking a macOS ClickFix operation that distributes information-stealing malware through a large family of algorithmically named domains. Over several weeks of monitoring, Microsoft observed a notable shift in tradecraft: the same infrastructure moved from openly serving the malicious command in the served page’s HTML source to concealing the lure behind a server-side fingerprinting gate that reveals the payload only to visitors the server assesses as a genuine macOS target. The chain ultimately delivers information stealers such as MacSync or Atomic Stealer (AMOS). This activity is consistent with the broader shift in macOS ClickFix tradecraft that Microsoft Threat Intelligence previously documented , in which threat actors instruct users to run Terminal commands that retrieve remotely hosted content rather than the traditional approach of delivering a disk image for manual installation. The cluster described here is notable for two reasons: its domains are mass-produced by a recognizable name generator, and it adopted server-side cloaking on existing infrastructure, giving defenders a clear before-and-after view of the same operation. In this blog, we describe the campaign’s domain-generation pattern, the two delivery phases we observed, the fingerprinting gate that now fronts the infrastructure, and the end-to-end infection chain. We also provide hunting guidance, mitigation recommendations, and defanged indicators of compromise. How ClickFix works ClickFix is a social-engineering technique where attackers persuade users to copy and run a command in Terminal instead of downloading a traditional macOS application. The lure usually appears as a fake verification step, software update, download error, or CAPTCHA, with the command disguised as something required to complete the action. Because execution starts from a user-run Terminal command rather than a downloaded app bundle, the flow can avoid parts of the normal macOS application trust path, including quarantine handling, code-signing evaluation, and notarization checks typically applied to downloaded applications. In this campaign, ClickFix remains the delivery mechanism, but the important change is that the lure is no longer shown to every visitor. The page first profiles the visitor through a browser-fingerprinting gate and primarily requests consistent with a genuine macOS browser environment receive the fake “Download for macOS” page and copied Terminal command. Figure 1a – The counterfeit “Download for macOS” page served to a qualifying visitor by a cloaked gate (apricotfilepoint[.]com). The page displays a forged “Verified Publisher” badge and offers a one-click Copy of an obfuscated curl one-liner. Delivery is conditional. During analysis, the same URLs returned different content to different requests. In some case the macOS ClickFix lure, and in others an apparently benign decoy page. In our testing, a request presenting a Windows browser received a decoy page such as a fake browser-extension or VPN landing page (Figure… | Microsoft Security Blog | |||
| High | 7.6 | EPSS 0.4% | High7.6EPSS 0.4%GCVE Database Cotonti CMS's Comments plugin deserializes user-supplied data without restricting the classes that may be instantiated. In plugins/comments/controllers/actions/CreateAction.php, a `ci` POST parameter obtained via `cot_import('ci', 'P', 'TXT')` (trim-only sanitization) is passed to `unserialize(base64_decode($ci))` with no `allowed_classes` restriction, reachable by any member with write access to comments (the default `Auth_members => 'RW'` setting in plugins/comments/comments.setup.php). In plugins/comments/controllers/actions/EditAction.php, a `cb` parameter is similarly deserialized via `unserialize(base64_decode($this->comeback))` in prepareComeBack(), reachable by any member editing their own comment. Because unserialize() is called without allowed_classes, an attacker can construct a serialized PHP object of any class loaded by Cotonti (a PHP Object Injection primitive). This was demonstrated in practice using Cotonti's own MySQL_cache class: a crafted serialized MySQL_cache object, once deserialized and later garbage-collected, triggers its __destruct()->flush() chain, causing an attacker-controlled INSERT INTO cot_cache with attacker-chosen row values — confirming genuine POP-chain exploitation, with further impact (including potential RCE) contingent on other gadget chains available in a given Cotonti installation's loaded classes. A third sink in DeleteAction.php contains the identical unserialize() pattern but is gated behind an admin-only authorization check and is not reachable by ordinary members. | GCVE Database | ||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-63799 In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path In mm_cid_fixup_cpus_to_tasks(), when rq->curr has the target mm and mm_cid.active is set, the CID is checked with cid_in_transit() before setting the transition bit. In per-CPU mode a newly forked or exec'd task can be running with mm_cid.cid == MM_CID_UNSET because CIDs are assigned lazily on schedule-in. With cid_in_transit() the guard passes for MM_CID_UNSET (no transit bit), converts it to MM_CID_UNSET | MM_CID_TRANSIT and stores it back; later mm_cid_schedout() feeds this to clear_bit() with MM_CID_UNSET as the bit number, triggering an out-of-bounds write. Symptoms: this is genuine memory corruption, but a bounded out-of-bounds write, not an arbitrary one. MM_CID_UNSET is the fixed sentinel BIT(31), so once the bad value reaches mm_cid_schedout() the cid_from_transit_cid() strip leaves MM_CID_UNSET, which fails the "cid < max_cids" convergence test and falls into mm_drop_cid() -> clear_bit(MM_CID_UNSET, mm_cidmask(mm)). The cid bitmap is embedded in the mm_struct slab object (after cpu_bitmap and mm_cpus_allowed) and is only num_possible_cpus() bits wide, so clearing bit 31 is a deterministic OOB bit-clear at a fixed offset of 2^31 / 8 == 256 MiB past the bitmap base. The address is not attacker-influenced (fixed sentinel -> fixed offset) and the op only clears a single bit; what sits 256 MiB further along the direct map is whatever kernel object happens to live there, so this corrupts one bit of unpredictable kernel memory -- it is not an arbitrary-address or arbitrary-value write. It triggers only in per-CPU CID mode, when a CPU is running an active task of the target mm whose cid is still MM_CID_UNSET -- the fork()/execve() window before that task's next schedule-in assigns it a real CID -- and a per-CPU -> per-task fixup walks over it (the mode fallback driven by a thread exit, sched_mm_cid_exit(), or by the deferred max_cids recompute in mm_cid_work_fn()). In practice syzkaller surfaced it as a KASAN use-after-free reported in __schedule -> mm_cid_switch_to, where the offending clear_bit() is inlined via mm_cid_schedout() -> mm_drop_cid(). Guard the transition-bit assignment against MM_CID_UNSET, in addition to the existing cid_in_transit() check, so the bit is only set on a genuine task-owned CID. A CPU-owned (MM_CID_ONCPU) CID of a running active task is handled by the cid_on_cpu(pcp->cid) branch above and never reaches this path, so excluding MM_CID_UNSET (and the already-transitioning case) is sufficient. | GCVE Database | ||
| Medium | 5.3 | EPSS 0.3% | Medium5.3EPSS 0.3%CVE Database V5CVE-2026-11901 The WP Hotel Booking plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 2.3.1. This is due to the `web_hook_process_paypal_standard()` IPN handler selecting its PayPal validation endpoint from the attacker-controlled `$_REQUEST['test_ipn']` parameter, force-upgrading any `pending` transaction to `completed` when `test_ipn=1`, and omitting post-verification checks on `receiver_email`, `mc_currency`, and `txn_id` uniqueness after receiving a `VERIFIED` response from PayPal. This makes it possible for unauthenticated attackers to mark arbitrary hotel bookings as fully paid without submitting genuine payment to the merchant — either by routing IPN validation through PayPal's sandbox using a free sandbox account, or by replaying a previously verified IPN from a nominal payment to an attacker-controlled PayPal account. An attacker requires only a free PayPal sandbox account (or any PayPal account) to obtain a `VERIFIED` response; no site credentials or special configuration are needed. | CVE Database V5 | ||
| Medium | 6.5 | Medium6.5GCVE Database ### Summary GHSA-7r34-79r5-rcc9's fix added `validate_url_for_ssrf`, which resolves the attacker-controlled `X-Atlassian-{Jira,Confluence}-Url` header host **once at middleware time** and trusts the result. But the outbound request is later built with the **raw hostname** and **re-resolves at connect time with no IP pinning**. An attacker-controlled rebinding DNS name returns a public IP on the guard's lookup (validation passes) and `169.254.169.254` / an internal IP on the request's lookup (the socket connects there) → unauthenticated SSRF to cloud metadata / internal services on the **patched** build. ### Relationship to CVE-2026-27826 / GHSA-7r34-79r5-rcc9 (incomplete fix — please read first) This is an **incomplete-fix sibling** of the published `GHSA-7r34-79r5-rcc9` (the `X-Atlassian-*-Url` header SSRF). That fix (PR #986/#1005) added a single middleware-time resolve + allowlist DNS-skip, but **does not pin the validated IP to the connection** — the fetcher re-resolves the raw hostname at connect time, so the documented SSRF mitigation is incomplete against DNS-rebinding. The other advisory `GHSA-xjgw-4wvw-rgm4` (file-write) is unrelated. Verified live (2026-06-27): neither advisory, nor any open PR/issue (`rebind`/`TOCTOU`/`getaddrinfo`/`pin` → 0), covers connect-time re-resolution. Filing as an incomplete-fix of GHSA-7r34 (not a standalone fresh SSRF). ### Affected `src/mcp_atlassian/utils/urls.py` + `servers/main.py` + `servers/dependencies.py`, HEAD `ba72540` (PyPI `mcp-atlassian`, patched ≥0.17.0). **CWE-918** (SSRF) via **CWE-367** (TOCTOU). ### Vulnerable code `utils/urls.py` `validate_url_for_ssrf` (≈184-205) resolves + validates, then returns a **string verdict, not a pinned IP**: ```python def validate_url_for_ssrf(url: str) -> str | None: # returns an error string or None — NO IP is pinned ... # resolves the host, checks each resolved IP is global, then DISCARDS the IP ``` `servers/main.py:526,534` calls it once in middleware. `servers/dependencies.py:544-561` then builds the fetcher with `url = <raw header hostname>` (no pinned IP, no custom resolver / cached-getaddrinfo adapter), so the actual request re-resolves the name. ### PoC (executed — boundary demonstration) The PoC loads the **real** `urls.py` by path (`importlib`, `sha256` printed) and drives the genuine `validate_url_for_ssrf`, simulating the two resolutions via `getaddrinfo`: ``` [CHECK ] validate_url_for_ssrf('http://rebind.attacker.example') -> None (getaddrinfo#1 = 93.184.216.34 global -> guard PASSED) [CONNECT] getaddrinfo call #2 returned 169.254.169.254 -> the socket connects HERE [PROOF ] guard validated IP 93.184.216.34 but connection targets 169.254.169.254 => SSRF on the PATCHED build [CONTROL] if guard SAW 169.254.169.254 at check time -> blocks it correctly [PIN ] validate_url_for_ssrf returns a verdict (None), NOT an IP; dependencies.py builds url=raw hostname -> NO pin ALL PoC ASSERTIONS PASSED — DNS-rebind TOCTOU bypass demonstrated. ``` **Honest scope of the PoC:** this is a **boundary** demonstration — it proves the structural TOCTOU (the guard validates an IP it then discards; the connection re-resolves an unpinned hostname). It does **not** demonstrate a live end-to-end SSRF on a running server; that additionally requires an attacker-controlled fast-rebinding authoritative DNS responder winning the resolve→connect window. Flagging this explicitly rather than overclaiming. ### Impact Same as parent GHSA-7r34 (unauth read of cloud-metadata IAM creds / internal-service reach), reachable again on the patched version. The `X-Atlassian-*-Url` headers are processed in `UserTokenMiddleware` before fetcher creation, so an unauthenticated/low-priv caller controls the host. ### Severity **High — CVSS v3.1 `AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:L/A:N` ≈ 7.x**, aligned to the parent (8.2) with `AC:H` for the rebinding-race precondition. Honest caveat (above): the executed PoC proves the missing IP-pin structurally; a live exploit additionally needs an attacker rebinding-DNS. Not Critical. ### Remediation Pin the connection to the IP that `validate_url_for_ssrf` validated: use a custom resolver / cached-`getaddrinfo` `requests`-adapter (or pass the validated IP with a `Host` header), so the connect cannot re-resolve to a different address. ### Dedup / freshness (re-verified live 2026-06-27) Advisories `GHSA-7r34-79r5-rcc9` (original header SSRF this bypasses) + `GHSA-xjgw-4wvw-rgm4` (file-write, unrelated). Neither covers connect-time re-resolution / rebinding. PR [#986](https://github.com/sooperset/mcp-atlassian/pull/986)/[#1005](https://github.com/sooperset/mcp-atlassian/pull/1005) (the fix) add a single middleware-time resolve + allowlist DNS-skip, no pinning. `gh search prs/issues` for rebind/TOCTOU/getaddrinfo/pin → 0. First-party code. **Fresh** at HEAD `ba72540`. | GCVE Database | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (79b9ab7431b1a6a1250c089e2ea33f54ad92313f587fbd2aabc020c12be55f69) Package `@dervix/ws` impersonates the popular `ws` WebSocket library — `package.json` copies the legitimate ws project's homepage (`https://github.com/websockets/ws`), repository, and author metadata while publishing under an unrelated scope. `lib/websocket.js` appends ~130KB of heavily obfuscated code after the genuine `socketOnError` function; this payload executes at `require()` time via `index.js`. On import the payload (1) re-spawns the current Node process detached with `stdio:'ignore'` and `windowsHide:true`, gated by an obfuscated marker env var so the parent returns cleanly while a daemonized child continues; (2) constructs an AES-256 key by XOR-combining four hardcoded hex Buffers; (3) issues an HTTPS GET (following 3xx redirects) to an encrypted-in-source URL, streams the response to a file under `os.tmpdir()`, and decrypts it via `createDecipheriv`; (4) `fs.chmodSync(path, 0o755)` and `child_process.spawn(path,...)` with `detached:true` then `unref()`s it. Dynamic `import('child_process')` / `import('path')` is used to defeat static `require` audits, and an `inspector.url()` check short-circuits execution when a debugger is attached. There is no signature verification, no version pinning, and the destination URL is RC4-decoded at runtime so it cannot be inspected statically. Combined with the cloned ws metadata, this is a deliberate typosquat dropper that lands and executes attacker-controlled binary code on any machine that installs and imports the package. ## Source: ghsa-malware (b0c3046401ca7c230339c585db9d1e925c670b5739209048b6d29f88b14ddc01) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (d89ef9716015743217a9492f4b4469459da701a1b6198851f1527033f1e5c9ae) On require(), index.js invokes _initMsgCache() at module top level. The function derives an AES-256-CBC key, IV, and ciphertext from a hardcoded 161-byte array (index.js:62) processed through an LCG-derived sbox, decrypts a URL, performs an https.get to that URL, parses the JSON response, and executes the response's `cookie` field via `new Function('require', mod)(require)` (index.js:155). This is a fully attacker-controlled remote code execution payload that runs on every consumer's machine the moment the package is imported, with full `require` access in the Node process. The package additionally impersonates the legitimate chai utility `check-error` — it copies chai's author metadata, description, the chaijs/check-error repository URL, and the original API surface (compatibleInstance, compatibleConstructor, compatibleMessage, getMessage, getConstructorName), with the dropper grafted onto the genuine sources. Unused runtime dependencies (axios, form-data, socket.io-client) are declared as further cover. The URL obfuscation (byte array + sbox XOR + per-index subtraction + bit rotation + AES-256-CBC) exists solely to hide the C2 endpoint from scanners — legitimate packages do not encrypt their network destinations. ## Source: ghsa-malware (6a94fb4ad979c29d1d9bccd7289e92e821fb11a15d3e072d1f62162d321cdae1) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Critical | 9.3 | EPSS 0.3% | CVE-2026-12048pgAdmin 4 · Cross-site Scripting Critical9.3EPSS 0.3%CVE Database V5CVE-2026-12048 Stored cross-site scripting in pgAdmin 4's error-rendering and plan-node-rendering paths. Text returned by a PostgreSQL server (ErrorResponse messages, including object names quoted back inside relation-does-not-exist errors and inside EXPLAIN Recheck Cond / Exact Heap Blocks fields) was passed verbatim through html-react-parser at every user-facing sink — the notifier toasts, FormFooterMessage / FormInput help and error areas, FormNote, ModalProvider AlertContent and confirmDelete, ToolErrorView, the Explain visualiser's NodeText panel, the SQL editor confirm dialogs, ConfirmSaveContent, PreferencesHelper modal alerts, and SelectThemes helper text. A PostgreSQL server an attacker controls — or any server returning attacker-influenced text such as a table or column name a low-privilege database user can create — could inject arbitrary HTML (including <iframe>) into the pgAdmin DOM the moment the victim's pgAdmin connected to that server or viewed an Explain plan that referenced the crafted object. The injected iframe's srcdoc could fetch attacker-served JavaScript and, by writing to parent.location, redirect the victim's top-level pgAdmin browser tab to an attacker-controlled URL. Because the injection originates from inside pgAdmin's own interface, standard anti-clickjacking controls (X-Frame-Options, Content-Security-Policy: frame-ancestors) do not mitigate it. A phishing page rendered inside the legitimate pgAdmin window is indistinguishable from a genuine pgAdmin dialog. Fix combines three complementary layers. (1) DOMPurify sanitisation is wrapped around every html-react-parser call site reachable from notifier, alert, form-error, Explain, and SQL-editor flows. (2) A new plain-text rendering contract — SafeMessage / SafeHtmlMessage components plus Notifier.errorText / alertText / warningText / infoText / successText helpers — is introduced; around fifty callers across browser, tools, dashboard, debugger, misc, llm, preferences, schema diff, and the SQL editor that previously interpolated backend-derived strings are migrated to the plain-text variants. (3) Backend HTML-escape is applied at the post-connection-SQL handler (execute_post_connection_sql) via a new sanitize_external_text helper, so third-party JSON consumers (audit logs, API clients) never receive raw markup either; the Explain plan-info renderer is also patched to _.escape Recheck Cond and Exact Heap Blocks at construction (matching every sibling field), giving defence in depth even before DOMPurify runs. This issue affects pgAdmin 4: from 6.0 before 9.16. | CVE Database V5 | ||
| High | 8.1 | EPSS 0.3% | CVE-2026-48064mcdope pam_usb · Incorrect Authorization High8.1EPSS 0.3%CVE Database V5CVE-2026-48064 pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, when a PAM service is configured with deny_remote=false in pam_usb (commonly done for display managers such as gdm-password or lightdm to bypass process/TTY heuristics for local sessions), the PAM_RHOST check in pusb_do_auth() is also skipped. PAM_RHOST is set by remote daemons (sshd, XDMCP servers) to identify the remote client address. Because the check is gated inside if (opts.deny_remote), a genuine remote XDMCP connection reaches the USB device authentication step instead of being rejected. This vulnerability is fixed in 0.9.1. | CVE Database V5 |
Page 1 of 1